High resolution imaging of viruses: Scanning probe microscopy and related techniques.

Scanning probe microscopy is a group of measurements that provides 3D visualization of viruses in different environmental conditions including liquids and air. Besides 3D topography it is possible to measure the properties like mechanical rigidity and stability, adhesion, tendency to crystallization, surface charge, etc. Choosing the right substrate and scanning parameters makes it much easier to obtain reliable data. Rational interpretation of experimental results should take into account possible artifacts, proper filtering and data presentation using specially designed software packages. Animal and human virus characterization is in the focus of many intensive studies because of their potential harm to higher organisms. The article focuses on high-resolution visualization of plant viruses. Tobacco mosaic virus, potato viruses X and B and others are not dangerous for the human being and are widely used in different applications such as vaccine preparation, construction of building units in nanotechnology and material science applications, nanoparticle production and delivery, and even metrology. The methods of virus's deposition, visualization, and consequent image processing and interpretation are described in details. Specific examples of viruses imaging are illustrated using the FemtoScan Online software, which has typical and all the necessary built-in functions for constructing three-dimensional images, their processing and analysis. Despite visible progress in visualizing the viruses using probe microscopy, many unresolved problems still remain. At present time the probe microscopy data on viruses is not systemized. There is no descriptive atlas of the images and morphology as revealed by this type of high resolution microscopy. It is worth emphasizing that new virus investigation methods will appear due to the progress of science.

Virus-Like Particle Facilitated Deposition of Hydroxyapatite Bone Mineral on Nanocellulose after Exposure to Phosphate and Calcium Precursors.

We produced and isolated tobacco mosaic virus-like particles (TMV VLPs) from bacteria, which are devoid of infectious genomes, and found that they have a net negative charge and can bind calcium ions. Moreover, we showed that the TMV VLPs could associate strongly with nanocellulose slurry after a simple mixing step. We sequentially exposed nanocellulose alone or slurries mixed with the TMV VLPs to calcium and phosphate salts and utilized physicochemical approaches to demonstrate that bone mineral (hydroxyapatite) was deposited only in nanocellulose mixed with the TMV VLPs. The TMV VLPs confer mineralization properties to the nanocellulose for the generation of new composite materials.

Effect of DNA bending on transcriptional interference in the systems of closely spaced convergent promoters.

BACKGROUND: Over the past years there are increasing evidences that the interplay between two molecules of RNA polymerases, initiating transcription from promoters, oriented in opposite (convergent) directions, can serve as a regulatory factor of gene expression. The data concerning the molecular mechanisms of this so-called transcriptional interference (TI) are not well understood. METHODS: The interaction of RNA polymerase with circular DNA templates, containing the convergent promoters, was investigated in a series of in vitro transcription assays and atomic force microscopy (AFM). RESULTS: In this work, to study the mechanisms of transcription interference a series of plasmids with oppositely oriented closely spaced artificial promoters, recognized by Escherichia coli RNA polymerase, was constructed. The constructs differ in promoter structure and distance between the transcription start sites. We have demonstrated that the transcripts ratio (RNA-R/RNA-L) and morphology of convergent open promoter complexes (OPC) are highly dependent on the interpromoter distance. CONCLUSIONS: The obtained results allowed us to suggest the novel model of TI, which assumes the DNA bending upon binding of RNA polymerase with promoters and explains the phenomenon of complete inactivation of weaker promoter by the stronger one. GENERAL SIGNIFICANCE: The results show that the conformational transitions in DNA helix, associated with DNA bending upon binding of RNA polymerase with promoters, play crucial role in OPC formation in the systems with convergent promoters.

Biosynthesis of stable iron oxide nanoparticles in aqueous extracts of Hordeum vulgare and Rumex acetosa plants.

We report the synthesis and characterization of amorphous iron oxide nanoparticles from iron salts in aqueous extracts of monocotyledonous (Hordeum vulgare) and dicotyledonous (Rumex acetosa) plants. The nanoparticles were characterized by TEM, absorbance spectroscopy, SAED, EELS, XPS, and DLS methods and were shown to contain mainly iron oxide and iron oxohydroxide. H. vulgare extracts produced amorphous iron oxide nanoparticles with diameters of up to 30 nm. These iron nanoparticles are intrinsically unstable and prone to aggregation; however, we rendered them stable in the long term by addition of 40 mM citrate buffer pH 3.0. In contrast, amorphous iron oxide nanoparticles (diameters of 10-40 nm) produced using R. acetosa extracts are highly stable. The total protein content and antioxidant capacity are similar for both extracts, but pH values differ (H. vulgare pH 5.8 vs R. acetosa pH 3.7). We suggest that the presence of organic acids (such oxalic or citric acids) plays an important role in the stabilization of iron nanoparticles, and that plants containing such constituents may be more efficacious for the green synthesis of iron nanoparticles.

Towards High-Temperature MEMS: Two-Step Annealing Suppressed Recrystallization in Thin Multilayer Pt-Rh/Zr Films.

Platinum-based thin films are widely used to create microelectronic devices operating at temperatures above 500 °C. One of the most effective ways to increase the high-temperature stability of platinum-based films involves incorporating refractory metal oxides (e.g., ZrO2, HfO2). In such structures, refractory oxide is located along the metal grain boundaries and hinders the mobility of Pt atoms. However, the effect of annealing conditions on the morphology and functional properties of such multiphase systems is rarely studied. Here, we show that the two-step annealing of 250-nm-thick Pt-Rh/Zr multilayer films instead of the widely used isothermal annealing leads to a more uniform film morphology without voids and hillocks. The composition and morphology of as-deposited and annealed films were investigated using X-ray diffraction and scanning electron microscopy, combined with energy-dispersive X-ray spectroscopy. At the first annealing step at 450 °C, zirconium oxidation was observed. The second high-temperature annealing at 800-1000 °C resulted in the recrystallization of the Pt-Rh alloy. In comparison to the one-step annealing of Pt-Rh and Pt-Rh/Zr films, after two-step annealing, the metal phase in the Pt-Rh/Zr films has a smaller grain size and a less pronounced texture in the <111> direction, manifesting enhanced high-temperature stability. After two-step annealing at 450/900 °C, the Pt-Rh/Zr thin film possessed a grain size of 60 ± 27 nm and a resistivity of 17 × 10-6 Ω·m. The proposed annealing protocol can be used to create thin-film MEMS devices for operation at elevated temperatures, e.g., microheater-based gas sensors.

Kinetic characterization of inhibition of human thrombin with DNA aptamers by turbidimetric assay.

A sensitive turbidimetric method for detecting fibrin association was used to study the kinetics of fibrinogen hydrolysis with thrombin. The data were complemented by high-performance liquid chromatography (HPLC) measurements of the peptide products, fibrinopeptides released during hydrolysis. Atomic force microscopy (AFM) data showed that the fibril diameter is the main geometric parameter influencing the turbidity. The turbidimetric assay was validated using thrombin with the standard activity. To study thrombin inhibitors, a kinetic model that allows estimating the inhibition constants and the type of inhibition was proposed. The kinetic model was used to study the inhibitory activity of the two DNA aptamers 15-TBA (thrombin-binding aptamer) and 31-TBA, which bind to thrombin exosites. For the first time, 31-TBA was shown to possess the competitive inhibition type, whereas the shortened aptamer 15-TBA has the noncompetitive inhibition type.

AFM study of Escherichia coli RNA polymerase σ7° subunit aggregation.

The self-assembly of Escherichia coli RNA polymerase σ7° subunit was investigated using several experimental approaches. A novel rodlike shape was reported for σ7° subunit aggregates. Atomic force microscopy reveals that these aggregates, or σ7° polymers, have a straight rodlike shape 5.4 nm in diameter and up to 300 nm in length. Atomic force microscopy data, Congo red binding assay, and sodium dodecyl sulfate gel electrophoresis confirm the amyloid nature of observed aggregates. The process of formation of rodlike structures proceeds spontaneously under nearly physiological conditions. E. coli RNA polymerase σ7° subunit may be an interesting object for investigation of amyloidosis as well as for biotechnological applications that exploit self-assembled bionanostructures. Polymerization of σ7° subunit may be a competitive process with its three-dimensional crystallization and association with core RNA polymerase. FROM THE CLINICAL EDITOR: In this basic science study, the self-assembly of Escherichia coli RNA polymerase σ7°( subunit was investigated using atomic force microscopy and other complementary approaches.

Investigation of early stages of fibrin association.

Interactions between fibrinogen molecules proteolytically cleaved with thrombin were investigated using atomic force microscopy (AFM) and dynamic light scattering (DLS). Gradually decreased fibrinogen concentrations were used to study the fibrin network, large separated fibrils, small fibrils in the initial association stages, and protofibrils. In addition, a new type of structure was found in AFM experiments at a low fibrinogen concentration (20 nM): the molecules in these single-stranded associates are arranged in a row, one after the other. The height, diameter, and distance between domains in these single-stranded associates were the same as those in the original fibrinogen molecules. DLS data assumed formation of extended associates in bulk solution at fibrinogen concentration as low as 20 nM.

Domain organization of the N-terminal portion of hordeivirus movement protein TGBp1.

Three 'triple gene block' proteins known as TGBp1, TGBp2 and TGBp3 are required for cell-to-cell movement of plant viruses belonging to a number of genera including Hordeivirus. Hordeiviral TGBp1 interacts with viral genomic RNAs to form ribonucleoprotein (RNP) complexes competent for translocation between cells through plasmodesmata and over long distances via the phloem. Binding of hordeivirus TGBp1 to RNA involves two protein regions, the C-terminal NTPase/helicase domain and the N-terminal extension region. This study demonstrated that the extension region of hordeivirus TGBp1 consists of two structurally and functionally distinct domains called the N-terminal domain (NTD) and the internal domain (ID). In agreement with secondary structure predictions, analysis of circular dichroism spectra of the isolated NTD and ID demonstrated that the NTD represents a natively unfolded protein domain, whereas the ID has a pronounced secondary structure. Both the NTD and ID were able to bind ssRNA non-specifically. However, whilst the NTD interacted with ssRNA non-cooperatively, the ID bound ssRNA in a cooperative manner. Additionally, both domains bound dsRNA. The NTD and ID formed low-molecular-mass oligomers, whereas the ID also gave rise to high-molecular-mass complexes. The isolated ID was able to interact with both the NTD and the C-terminal NTPase/helicase domain in solution. These data demonstrate that the hordeivirus TGBp1 has three RNA-binding domains and that interaction between these structural units can provide a basis for remodelling of viral RNP complexes at different steps of cell-to-cell and long-distance transport of virus infection.

Label-free sensitive detection of influenza virus using PZT discs with a synthetic sialylglycopolymer receptor layer.

We describe rapid, label-free detection of Influenza A viruses using the first radial mode of oscillations of lead zirconate titanate (PZT) piezoelectric discs with a 2 mm radius and 100 µm thickness fabricated from a piezoelectric membrane. The discs are modified with a synthetic sialylglycopolymer receptor layer, and the coated discs are inserted in a flowing virus suspension. Label-free detection of the virus is achieved by monitoring the disc radial mode resonance frequency shift. Piezo transducers with sialylglycopolymer sensor layers exhibited a long lifetime, a high sensitivity and the possibility of regeneration. We demonstrate positive, label-free detection of Influenza A viruses at concentrations below 105 virus particles per millilitre. We show that label-free, selective, sensitive detection of influenza viruses by home appliances is possible in principle.

Highly sensitive detection of influenza virus with SERS aptasensor.

Highly sensitive and rapid technology of surface enhanced Raman scattering (SERS) was applied to create aptasensors for influenza virus detection. SERS achieves 106-109 times signal amplification, yielding excellent sensitivity, whereas aptamers to hemagglutinin provide a specific recognition of the influenza virus. Aptamer RHA0385 was demonstrated to have essentially broad strain-specificity toward both recombinant hemagglutinins and the whole viruses. To achieve high sensitivity, a sandwich of primary aptamers, influenza virus and secondary aptamers was assembled. Primary aptamers were attached to metal particles of a SERS substrate, and influenza viruses were captured and bound with secondary aptamers labelled with Raman-active molecules. The signal was affected by the concentration of both primary and secondary aptamers. The limit of detection was as low as 1 · 10-4 hemagglutination units per probe as tested for the H3N2 virus (A/England/42/72). Aptamer-based sensors provided recognition of various influenza viral strains, including H1, H3, and H5 hemagglutinin subtypes. Therefore, the aptasensors could be applied for fast and low-cost strain-independent determination of influenza viruses.

Blister formation during graphite surface oxidation by Hummers' method.

Graphite oxide has a complex structure that can be modified in many ways to obtain materials for a wide range of applications. It is known that the graphite precursor has an important role in the synthesis of graphite oxide. In the present study, the basal-plane surface of highly annealed pyrolythic graphite (HAPG) was oxidized by Hummers' method and investigated by Raman spectroscopy and atomic force microscopy. HAPG was used as a graphite precursor because its surface after cleavage contains well-ordered millimeter-sized regions. The treatment resulted in graphite intercalation by sulfuric acid and blister formation all over the surface. Surprisingly, the destruction of the sp2-lattice was not detected in the ordered regions. We suggest that the reagent diffusion under the basal plane surface occurred through the cleavage steps and dislocations with the Burgers vector parallel to the c-axis in graphite.

Polyelectrolyte thromboresistant affinity coatings for modification of devices contacting blood.

The modification of hydrophobic polyethylene/polystyrene surfaces of medical devices with bilayer/multilayer coatings (BCs/MCs) based on polyelectrolyte complexes (PEC) of modified poly(N-vinylpyrrolidone-co-maleic acid) copolymer (VPMA) with chitosan, amphiphilic chitosan, or albumin was studied. The VPMA contained l-Lysine as affinity ligand for plasminogen attached through alpha-amino group. The surface properties and chemical composition of the surfaces investigated were analyzed, using sessile-drop water contact angle measurements, attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The specific adsorption of plasminogen (precursor of fibrinolytic enzyme plasmin) from its solutions and from human blood plasma on the modified surfaces was investigated. It was established that polyelectrolyte MCs are more efficient than single-layer BCs and the affine polymer coatings without interlayer. A thrombogenicity decrease for the materials modified with BCs and MCs was shown in in vitro and ex vivo trials.

Atomic force microscopy as a tool of inspection of viral infection.

Here we present a short review of application of atomic force microscopy (AFM) for investigation of viruses, accompanied by examples of high-resolution AFM images of different viral particles. The possibility of using AFM to identify viruses is discussed.

Direct Observation of Changes in Focal Conic Domains of Cholesteric Films Induced by Ultraviolet Irradiation.

The helical supramolecular structure of cholesteric liquid crystalline (LC) films predetermines their outstanding optical properties and the unique nanostructure of their surface. The introduction of photochromic dopants in these films opens up an interesting possibility for creation of smart cholesteric materials with photocontrollable optical and photovariable surface properties. Using atomic force microscopy (AFM), we performed in situ measurements of the surface topography of cyclosiloxane LC cholesteric oligomer films during the cholesteric helix twisting caused by their preliminary ultraviolet (UV) irradiation. A chiral-photochromic isosorbide-based dopant was introduced in the films to control the cholesteric helix pitch by UV-irradiation. The initial films are characterized by planar texture with the presence of focal conic domains having the double-spiral relief on their surface. UV-irradiation of these films leads to the cholesteric helix twisting resulting in a decrease in the surface relief period, and the enlargement of defect areas between the domains. The detailed mechanisms of the rearrangement of the film surface structure due to the cholesteric helix twisting are suggested. They include the rotation and displacement of cholesteric layers in the bulk, and the nucleation of new ones at the surface in defect regions.

Structural organization of mRNA complexes with major core mRNP protein YB-1.

YB-1 is a universal major protein of cytoplasmic mRNPs, a member of the family of multifunctional cold shock domain proteins (CSD proteins). Depending on its amount on mRNA, YB-1 stimulates or inhibits mRNA translation. In this study, we have analyzed complexes formed in vitro at various YB-1 to mRNA ratios, including those typical for polysomal (translatable) and free (untranslatable) mRNPs. We have shown that at mRNA saturation with YB-1, this protein alone is sufficient to form mRNPs with the protein/RNA ratio and the sedimentation coefficient typical for natural mRNPs. These complexes are dynamic structures in which the protein can easily migrate from one mRNA molecule to another. Biochemical studies combined with atomic force microscopy and electron microscopy showed that mRNA-YB-1 complexes with a low YB-1/mRNA ratio typical for polysomal mRNPs are incompact; there, YB-1 binds to mRNA as a monomer with its both RNA-binding domains. At a high YB-1/mRNA ratio typical for untranslatable mRNPs, mRNA-bound YB-1 forms multimeric protein complexes where YB-1 binds to mRNA predominantly with its N-terminal part. A multimeric YB-1 comprises about twenty monomeric subunits; its molecular mass is about 700 kDa, and it packs a 600-700 nt mRNA segment on its surface.

AFM study of potato virus X disassembly induced by movement protein.

Recently we have reported that a selective binding of potato virus X (PVX)-coded movement protein (termed TGBp1 MP) to one end of a polar coat protein (CP) helix converted viral RNA into a translatable form and induced a linear destabilization of the whole helical particle. Here, the native PVX virions, RNase-treated (PVX(RNA-DEG)) helical particles lacking intact RNA and their complexes with TGBp1 (TGBp1-PVX and TGBp1-PVX(RNA-DEG)), were examined by atomic force microscopy (AFM). When complexes of the TGBp1 MP with PVX were examined by means of AFM in liquid, no structural reorganization of PVX particles was observed. By contrast, the products of TGBp1-dependent PVX degradation termed "beads-on-string" were formed under conditions of AFM in air. The AFM images of PVX(RNA-DEG) were indistinguishable from images of native PVX particles; however, the TGBp1-dependent disassembly of the CP-helix was triggered when the TGBp1-PVX(RNA-DEG) complexes were examined by AFM, regardless of the conditions used (in air or in liquid). Our data supported the idea that binding of TGBp1 to one end of the PVX CP-helix induced linear destabilization of the whole helical particle, which may lead to its disassembly under conditions of AFM.

Surface Relief Changes in Cholesteric Cyclosiloxane Oligomer Films at Different Temperatures.

The development of new approaches for the surface topography control is an important topic as the relief significantly affects physical and chemical properties of surfaces. We studied cholesteric cyclosiloxane oligomeric films on which surface focal conic domains with double-helix pattern were observed by means of AFM. In situ investigation of the dependence of the films topography on temperature showed that the surface relief formation can be effectively managed by varying conditions of thermal treatment. Obtained structures can be frozen by cooling the films below glass-transition temperature.

A Genetically Modified Tobacco Mosaic Virus that can Produce Gold Nanoparticles from a Metal Salt Precursor.

We genetically modified tobacco mosaic virus (TMV) to surface display a characterized peptide with potent metal ion binding and reducing capacity (MBP TMV), and demonstrate that unlike wild type TMV, this construct can lead to the formation of discrete 10-40 nm gold nanoparticles when mixed with 3 mM potassium tetrachloroaurate. Using a variety of analytical physicochemical approaches it was found that these nanoparticles were crystalline in nature and stable. Given that the MBP TMV can produce metal nanomaterials in the absence of chemical reductants, it may have utility in the green production of metal nanomaterials.

Microbial surfaces investigated using atomic force microscopy.

This paper is dedicated to atomic force microscopy (AFM) as a progressive tool for imaging bacterial surfaces and probing their properties. The description of the technique is complemented by the explanation of the method's artifacts typical, in particular, for the imaging of bacterial cells. Sample preparation techniques are summarized in a separate section. Special attention is paid to the differences in imaging of gram-positive and gram-negative bacteria. Probing of mechanical properties, including elastic modulus, fragility, and adhesion of the cell walls is emphasized. The advantages of AFM in the studies of real-time cellular dynamical processes are illustrated by the experiment with the germination of spores.