A LaCl3-based lithium superionic conductor compatible with lithium metal.

Inorganic superionic conductors possess high ionic conductivity and excellent thermal stability but their poor interfacial compatibility with lithium metal electrodes precludes application in all-solid-state lithium metal batteries1,2. Here we report a LaCl3-based lithium superionic conductor possessing excellent interfacial compatibility with lithium metal electrodes. In contrast to a Li3MCl6 (M = Y, In, Sc and Ho) electrolyte lattice3-6, the UCl3-type LaCl3 lattice has large, one-dimensional channels for rapid Li+ conduction, interconnected by La vacancies via Ta doping and resulting in a three-dimensional Li+ migration network. The optimized Li0.388Ta0.238La0.475Cl3 electrolyte exhibits Li+ conductivity of 3.02 mS cm-1 at 30 °C and a low activation energy of 0.197 eV. It also generates a gradient interfacial passivation layer to stabilize the Li metal electrode for long-term cycling of a Li-Li symmetric cell (1 mAh cm-2) for more than 5,000 h. When directly coupled with an uncoated LiNi0.5Co0.2Mn0.3O2 cathode and bare Li metal anode, the Li0.388Ta0.238La0.475Cl3 electrolyte enables a solid battery to run for more than 100 cycles with a cutoff voltage of 4.35 V and areal capacity of more than 1 mAh cm-2. We also demonstrate rapid Li+ conduction in lanthanide metal chlorides (LnCl3; Ln = La, Ce, Nd, Sm and Gd), suggesting that the LnCl3 solid electrolyte system could provide further developments in conductivity and utility.

Stable All-Solid-State Lithium Metal Batteries Enabled by Machine Learning Simulation Designed Halide Electrolytes.

Solid electrolytes (SEs) with superionic conductivity and interfacial stability are highly desirable for stable all-solid-state Li-metal batteries (ASSLMBs). Here, we employ neural network potential to simulate materials composed of Li, Zr/Hf, and Cl using stochastic surface walking method and identify two potential unique layered halide SEs, named Li2ZrCl6 and Li2HfCl6, for stable ASSLMBs. The predicted halide SEs possess high Li+ conductivity and outstanding compatibility with Li metal anodes. We synthesize these SEs and demonstrate their superior stability against Li metal anodes with a record performance of 4000 h of steady lithium plating/stripping. We further fabricate the prototype stable ASSLMBs using these halide SEs without any interfacial modifications, showing small internal cathode/SE resistance (19.48 Ω cm2), high average Coulombic efficiency (∼99.48%), good rate capability (63 mAh g-1 at 1.5 C), and unprecedented cycling stability (87% capacity retention for 70 cycles at 0.5 C).

Phylogenetic reappraisal of Allium subgenus Cyathophora (Amaryllidaceae) and related taxa, with a proposal of two new sections.

The phylogeny of subgenus Cyathophora and representatives of its closely related taxa within Allium were reconstructed based on nrDNA ITS and two plastid fragments (trnL-F and rpl32-trnL). The constructed phylogenies indicated that subgenus Cyathophora was not monophyletic and to be split in three parts positioned in different clusters. Allium kingdonii was unequivocally placed within subgenus Amerallium and formed an immediate sister relationship with New World Amerallium clade, suggesting an unexpected intercontinental disjunct distribution. For another, Allium trifurcatum was firmly nested within subgenus Butomissa next to A. tuberosum and A. ramosum, but it is distinctly different morphologically from the latter by thinly leathery bulb tunics, uniovulate locule and obviously 3-cleft stigma. Based on the geographic features, morphological and molecular evidences, two new sections, Kingdonia X.J.He et D.Q.Huang for A. kingdonii and Trifurcatum X.J.He et D.Q.Huang for A. trifurcatum, were proposed. The remaining three species of subgenus Cyathophora formed a well-defined clade, and the phylogenetic relationships among them recovered were consistent with previous findings. In addition, A. weschniakowii and A. subtilissimum were proven to be a member of subgenera Rhizirideum sensu stricto (s. str.) and Cepa, respectively, rather than subgenera Cepa and Polyprason previously proposed. Section Rhizomatosa represented by A. caespitosum should be subsumed within section Caespitosoprason of subgenus Rhizirideum s. str.

Lead-Free Solid-State Organic-Inorganic Halide Perovskite Electrolyte for Lithium-Ion Conduction.

Exploring new solid electrolytes (SEs) for lithium-ion conduction is significant for the development of rechargeable all-solid-state lithium batteries. Here, a lead-free organic-inorganic halide perovskite, MASr0.8Li0.4Cl3 (MA = methylammonium, CH3NH3 in formula), is reported as a new SE for Li-ion conduction due to its highly symmetric crystal structure, inherent soft lattice, and good tolerance for composition tunability. Via density functional theory calculations, we demonstrate that the hybrid perovskite framework can allow fast Li-ion migration without the collapse of the crystal structure. The influence of the lithium content in MASr1-xLi2xCl3 (x = 0.1, 0.2, 0.3, or 0.4) on Li+ migration is systematically investigated. At the lithium content of x = 0.2, the MASr0.8Li0.4Cl3 achieves the room-temperature lithium ionic conductivity of 7.0 × 10-6 S cm-1 with a migration energy barrier of ∼0.47 eV. The lithium-tin alloy (Li-Sn) symmetric cell exhibits stable electrochemical lithium plating/stripping for nearly 100 cycles, indicating the alloy anode compatibility of the MASr0.8Li0.4Cl3 SE. This lead-free organic-inorganic halide perovskite SE will open a new avenue for exploring new SEs.

Metal chloride perovskite thin film based interfacial layer for shielding lithium metal from liquid electrolyte.

Fabricating a robust interfacial layer on the lithium metal anode to isolate it from liquid electrolyte is vital to restrain the rapid degradation of a lithium metal battery. Here, we report that the solution-processed metal chloride perovskite thin film can be coated onto the lithium metal surface as a robust interfacial layer to shield the lithium metal from liquid electrolyte. Via phase analysis and density functional theory calculations, we demonstrate that the perovskite layer can allow fast lithium ion shuttle under a low energy barrier of 0.45 eV without the collapse of framework. Such perovskite modification can realize stable cycling of LiCoO2|Li cells with an areal capacity of 2.8 mAh cm-2 using thin lithium metal foil (50 µm) and limited electrolyte (20 µl mAh-1) for over 100 cycles at 0.5 C. The metal chloride perovskite protection strategy could open a promising avenue for advanced lithium metal batteries.

Macrophage migration inhibitory factor deficiency impairs atherosclerosis in low-density lipoprotein receptor-deficient mice.

BACKGROUND: Macrophage migration inhibitory factor (MIF) is a proinflammatory cytokine expressed widely by vascular cells. However, scant in vivo evidence supports direct participation of MIF in atherogenesis. Therefore, we investigated whether deficiency of MIF modulates atherosclerotic lesion formation and composition in low-density lipoprotein receptor-deficient (LDLr-/-) mice. METHODS AND RESULTS: MIF-/-LDLr-/- and LDLr-/- mice were generated and consumed an atherogenic diet for 12 or 26 weeks. MIF-/-LDLr-/- mice had significantly reduced abdominal aorta lipid deposition and intimal thickening from aortic arch throughout the abdominal aorta compared with LDLr-/- mice. Marked retardation of atherosclerosis over time in MIF-deficient mice accompanied decreased lesion cell proliferation. At 26 weeks, 20% of MIF-deficient mice developed only early, fatty streak-like lesions, whereas >80% of LDLr-/- mice developed advanced lesions containing calcification and lipid cores. Analysis of smooth muscle cells from mouse aortae demonstrated that MIF deficiency reduced smooth muscle cell proliferation, cysteine protease expression, and elastinolytic and collagenolytic activities. CONCLUSIONS: Deficiency of MIF reduces atherogenesis in LDLr-/- mice. These results provide novel insight into inflammatory pathways operating in atheromata and identify a new potential target for modulating atherogenesis.

Complete genome sequence of a nephropathogenic infectious bronchitis virus strain isolated in china.

Infectious bronchitis virus (IBV) causes tremendous economic losses to the poultry industry. Here, we report the complete genome analysis results for a new natural recombination nephropathogenic IBV strain named SAIBK, which was isolated in the Sichuan province of China in 2005.

[Effects of drought stress on leaf gas exchange and chlorophyll fluorescence of Salvia miltiorrhiza].

Taking the seedlings of Salvia miltiorrhiza cv. Sativa (SA) and S. miltiorrhiza cv. Silcestris (SI) as test materials, this paper studied the effects of drought stress on their leaf gas exchange and chlorophyll fluorescence parameters. After 15 days of drought stress, the net photosynthetic rate (P(n)) and the maximal photochemical efficiency of PS II (F(v)/F(m)) of SA were decreased by 66.42% and 10.98%, whereas those of SI were decreased by 29.32% and 5.47%, respectively, compared with the control, suggesting that drought stress had more obvious effects on the P(n) and F(v)/F(m) of SA than of SI. For SI, the reduction of P, under drought stress was mainly due to stomatal limitation; while for SA, it was mainly due to non-stomatal limitation. Drought led to a decrease of leaf stomatal conductance (G(s)), but induced the increase of water use efficiency (WUE), non-photochemical quenching coefficient (q(N)), and the ratio of photorespiration rate to net photosynthetic rate (P(r)/P(n)), resulting in the enhancement of drought resistance. The increment of WUE, q(N), and P(r)/P(n) was larger for SI than for SA, indicating that SI had a higher drought resistance capacity than SA.