RESUMO
Plant trichome development is influenced by diverse developmental and environmental signals, but the molecular mechanisms involved are not well understood in most plant species. Fruit spines (trichomes) are an important trait in cucumber (Cucumis sativus L.), as they affect both fruit smoothness and commercial quality. Spine Base Size1 (CsSBS1) has been identified as essential for regulating fruit spine size in cucumber. Here, we discovered that CsSBS1 controls a season-dependent phenotype of spine base size in wild-type plants. Decreased light intensity led to reduced expression of CsSBS1 and smaller spine base size in wild-type plants, but not in the mutants with CsSBS1 deletion. Additionally, knockout of CsSBS1 resulted in smaller fruit spine base size and eliminated the light-induced expansion of spines. Overexpression of CsSBS1 increased spine base size and rescued the decrease in spine base size under low light conditions. Further analysis revealed that ELONGATED HYPOTCOTYL5 (HY5), a major transcription factor involved in light signaling pathways, directly binds to the promoter of CsSBS1 and activates its expression. Knockout of CsHY5 led to smaller fruit spine base size and abolished the light-induced expansion of spines. Taken together, our study findings have clarified a CsHY5-CsSBS1 regulatory module that mediates light-regulated spine expansion in cucumber. This finding offers a strategy for cucumber breeders to develop fruit with stable appearance quality under changing light conditions.
Assuntos
Cucumis sativus , Regulação da Expressão Gênica de Plantas , Luz , Proteínas de Plantas , Cucumis sativus/genética , Cucumis sativus/crescimento & desenvolvimento , Cucumis sativus/efeitos da radiação , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Frutas/genética , Frutas/crescimento & desenvolvimento , Tricomas/genética , Tricomas/crescimento & desenvolvimento , Fatores de Transcrição/metabolismo , Fatores de Transcrição/genética , Fenótipo , Regiões Promotoras Genéticas/genéticaRESUMO
Metallic charge transport and porosity appear almost mutually exclusive. Whereas metals demand large numbers of free carriers and must have minimal impurities and lattice vibrations to avoid charge scattering, the voids in porous materials limit the carrier concentration, provide ample space for impurities, and create more charge-scattering vibrations due to the size and flexibility of the lattice. No microporous material has been conclusively shown to behave as a metal. Here, we demonstrate that single crystals of the porous metal-organic framework Ln1.5(2,3,6,7,10,11-hexaoxytriphenylene) (Ln = La, Nd) are metallic. The materials display the highest room-temperature conductivities of all porous materials, reaching values above 1,000 S/cm. Single crystals of the compounds additionally show clear temperature-deactivated charge transport, a hallmark of a metallic material. Lastly, a structural transition consistent with charge density wave ordering, present only in metals and rare in any materials, provides additional conclusive proof of the metallic nature of the materials. Our results provide an example of a metal with porosity intrinsic to its structure. We anticipate that the combination of porosity and chemical tunability that these materials possess will provide a unique handle toward controlling the unconventional states that lie within them, such as charge density waves that we observed, or perhaps superconductivity.
RESUMO
BACKGROUND: Numerous studies have demonstrated the impact of beverage consumption on overall health and oral health. Specifically, high consumption of sugar-sweetened beverages and coffee has been associated with an increased risk of metabolic disorders and periodontitis. Conversely, high intake of plain water has been linked to various health benefits, including weight management and reduced energy intake. However, no previous studies have explored the potential association between plain water intake and the risk of periodontitis. OBJECTIVES: Our objective was to investigate the relationship between plain water consumption and periodontitis in a middle-aged and elderly population. METHODS: The present cross-sectional study was conducted among participants aged ≥ 45 in the 2009-2014 National Health and Nutrition Examination Surveys. Multivariable regression analysis, subgroup analysis and smooth fitting tests were conducted to explore the independent relationship between plain water intake and periodontitis. RESULTS: A total of 5,882 participants were enrolled,62.02% have periodontitis. Periodontitis patients have lower plain water intake. The multivariable regression tests showed that the risk of periodontitis decreased with increased plain water intake quartiles (Q4 OR = 0.78; 95%CI 0.62-0.96) after fully adjustment. Subgroup analysis and interaction tests showed that gender, age, smoking, diabetes, hypertension or BMI does not significantly interact with the association. However, the relation was significant in males (Q4 OR = 0.64; 95%CI 0.47-0.86) but not in females (Q4 OR = 0.97;95% CI 0.71-1.31). In the smoothed curve fits stratified by gender, the curve for male participants displayed as a U-shape, with an optimal plain water intake at 1200 ml/day. For males drinking plain water less than 1200 ml/day, the risk of periodontitis decreased by 24% with each increase of 500 ml plain water intake (OR = 0.76, 95%CI 0.66-0.87, p < 0.001). CONCLUSIONS: Together, the results showed that plain water intake is negatively associated with periodontitis risk in US middle aged and elderly population. Further studies are needed to investigate the mechanism unites this association. Attention should be given to adequate plain water intake when considering dietary suggestions to the population at high risk of developing periodontitis, especially for men.
Assuntos
Ingestão de Líquidos , Periodontite , Feminino , Pessoa de Meia-Idade , Humanos , Idoso , Masculino , Estudos Transversais , Inquéritos Nutricionais , Periodontite/epidemiologia , ÁguaRESUMO
Watermelon (Citrullus lanatus) is a widely cultivated cucurbitaceae crop appreciated by consumers worldwide. However, the long vine and abundant lateral branches of currently cultivated watermelon varieties hinder light simplification and mechanized cultivation, affecting plant spacing and row spacing requirements. To address this, the development of watermelon with dwarf and branchless traits has become a crucial direction for the industry. In previous studies, the genes controlling dwarf (Cldw-1) and branchless (Clbl) traits were mapped and cloned. Marker-assisted selection markers, dCAPS3 and dCAPS10, were developed for these traits, respectively. In this study, the dwarf germplasm WM102 and the branchless germplasm WCZ were crossed to obtain F1 .Further self-crossing of the F1 individuals resulted in the F2 population. Through multiple generations of self-pollination, a new watermelon germplasm DM with double mutation (dwarf and branchless) was obtained. DM exhibited stable inheritance without segregation. Moreover, DM was used as a donor parent for crossing with commercial watermelon materials, and near-isogenic lines (NILs) with the dwarf and branchless traits were developed. These NILs carry additional desirable agronomic traits and provide valuable genetic resources for future watermelon breeding programs, particularly in improving plant architecture and overall quality. The development and application of DM and NILs hold great potential for advancing the watermelon industry toward industrialization, large-scale cultivation, and enhanced plant architecture.
Assuntos
Citrullus , Humanos , Citrullus/genética , Mapeamento Cromossômico/métodos , Melhoramento Vegetal , Fenótipo , MutaçãoRESUMO
Triplet-fusion-based photon upconversion holds promise for a wide range of applications, from photovoltaics to bioimaging. The efficiency of triplet fusion, however, is fundamentally limited in conventional molecular and polymeric systems by its spin dependence. Here, we show that the inherent tailorability of metal-organic frameworks (MOFs), combined with their highly porous but ordered structure, minimizes intertriplet exchange coupling and engineers effective spin mixing between singlet and quintet triplet-triplet pair states. We demonstrate singlet-quintet coupling in a pyrene-based MOF, NU-1000. An anomalous magnetic field effect is observed from NU-1000 corresponding to an induced resonance between singlet and quintet states that yields an increased fusion rate at room temperature under a relatively low applied magnetic field of 0.14 T. Our results suggest that MOFs offer particular promise for engineering the spin dynamics of multiexcitonic processes and improving their upconversion performance.
Assuntos
Estruturas Metalorgânicas , Polímeros/químicaRESUMO
KEY MESSAGE: A SNP mutation in CmYGP gene encoding Golden2-like transcription factor is responsible for melon yellow-green plant trait. Chlorophylls are essential and beneficial substances for both plant and human health. Identifying the regulatory network of chlorophyll is necessary to improve the nutritional quality of fruits. At least six etiolation genes have been identified in different melon varieties, but none of them have been cloned, and the molecular mechanisms underlying chlorophyll synthesis and chloroplast development in melon remain unclear. Here, the NSL73046, a yellow-green plant (Cmygp) mutant, enabled the map-based cloning of the first etiolation gene in melon. CmYGP encodes a Golden2-like transcription factor. Spatiotemporal expression analyses confirmed the high CmYGP expression in all green tissues, particularly in young leaves and fruit peels. Virus-induced gene silencing and the development of near-isogenic line by marker-assisted selection further confirmed that downregulation of CmYGP can reduce chloroplast number and chlorophyll content, thereby resulting in yellow-green leaves and fruits in melon, and overexpression of CmYGP in tomatoes also led to dark-green leaves and fruits. RNA-seq analysis revealed that CmYGP greatly affected the expression of key genes associated with chloroplast development. Taken together, these findings demonstrated that CmYGP regulate chlorophyll synthesis and chloroplast development thus affect fruit development in melon. This study also offers a new strategy to enhance fruit quality in melon.
Assuntos
Cucurbitaceae , Fatores de Transcrição , Humanos , Fatores de Transcrição/genética , Fatores de Transcrição/metabolismo , Proteínas de Plantas/metabolismo , Cloroplastos/genética , Cloroplastos/metabolismo , Clorofila/genética , Regulação da Expressão Gênica de PlantasRESUMO
KEY MESSAGE: A SNP mutation in CmSN, encoding an EamA-like transporter, is responsible for fruit skin netting in melon. In maturing melon (Cucumis melo L.), the rind becomes reticulated or netted, a unique characteristic that dramatically changes the appearance of the fruit. However, little is known about the molecular basis of fruit skin netting formation in this important cucurbit crop. Here, we conducted map-based cloning of a skin netting (CmSN) locus using segregating populations derived from the cross between the smooth-fruit line H906 and the netted-fruit line H581. The results showed that CmSN was controlled by a single dominant gene and was primarily positioned on melon chromosome 2, within a physical interval of ~ 351 kb. Further fine mapping in a large F2 population narrowed this region to a 71-kb region harboring 5 genes. MELO3C010288, which encodes a protein in the EamA-like transporter family, is the best possible candidate gene for the netted phenotype. Two nonsynonymous single nucleotide polymorphisms (SNPs) were identified in the third and sixth exons of the CmSN gene and co-segregated with the skin netting (SN) phenotype among the genetic population. A genome-wide association study (GWAS) determined that CmSN is probably a domestication gene under selective pressure during the subspecies C. melo subsp. melo differentiation. The SNP in the third exon of CmSN (the leading SNP in GWAS) revealed a bi-allelic diversity in natural accessions with SN traits. Our results lay a foundation for deciphering the molecular mechanism underlying the formation of fruit skin netting in melon, as well as provide a strategy for genetic improvement of netted fruit using a marker-assisted selection approach.
Assuntos
Cucumis melo , Frutas , Frutas/genética , Estudo de Associação Genômica Ampla , Alelos , Cucumis melo/genética , DomesticaçãoRESUMO
Hydrogel materials have been used extensively in microbial electrochemical technology (MET) and sensor development due to their high biocompatibility and low toxicity. With an increasing demand for sensors across different sectors, it is crucial to understand the current state within the sectors of hydrogel METs and sensors. Surprisingly, a systematic review examining the application of hydrogel-based METs to sensor technologies has not yet been conducted. This review aimed to identify the current research progress surrounding the incorporation of hydrogels within METs and sensors development, with a specific focus on microbial fuel cells (MFCs) and microbial electrolysis cells (MECs). The manufacturing process/cost, operational performance, analysis accuracy and stability of typical hydrogel materials in METs and sensors were summarised and analysed. The current challenges facing the technology as well as potential direction for future research were also discussed. This review will substantially promote the understanding of hydrogel materials used in METs and benefit the development of electrochemical biosensors using hydrogel-based METs.
Assuntos
Fontes de Energia Bioelétrica , Técnicas Biossensoriais , Hidrogéis , Eletrólise , TecnologiaRESUMO
The development of sensors for water quality monitoring is crucial to protect water quality, aquatic biota and human health. Traditional sensor manufacturing methods have significant drawbacks, such as low fabrication freedom, limited material choice and expensive manufacturing cost. As a possible alternative method, 3D printing technologies are increasingly popular in sensor development due to their high versatility, fast fabrication/modification, powerful processing of different materials and ease of incorporation with other sensor systems. Surprisingly, a systematic review examining the application of 3D printing technology in water monitoring sensors has not yet been conducted. Here, we summarized the development history, market share and advantages/disadvantages of typical 3D printing techniques. Specifically focused on the 3D-printed sensor for water quality monitoring, we then reviewed the applications of 3D printing in the development of sensors' supporting platform, cell, sensing electrode as well as all-3D-printed sensors. The fabrication materials and processing, and the sensor's performances regarding detected parameters, response time and detection limit/sensitivity, were also compared and analyzed. Finally, the current drawbacks of 3D-printed water sensors and potential directions for future study were discussed. This review will substantially promote the understanding of 3D printing technology used in water sensor development and benefit the protection of water resources.
RESUMO
We reveal here the construction of Ni-based metal-organic frameworks (MOFs) and conjugated coordination polymers (CCPs) with different structural dimensionalities, including closely π-stacked 1D chains (Ni-1D), aggregated 2D layers (Ni-2D), and a 3D framework (Ni-3D), based on 2,3,5,6-tetraamino-1,4-hydroquinone (TAHQ) and its various oxidized forms. These materials have the same metal-ligand composition but exhibit distinct electronic properties caused by different dimensionalities and supramolecular interactions between SBUs, ligands, and structural motifs. The electrical conductivity of these materials spans nearly 8 orders of magnitude, approaching 0.3 S/cm.
RESUMO
Recent advancements in quantum sensing have sparked transformative detection technologies with high sensitivity, precision, and spatial resolution. Owing to their atomic-level tunability, molecular qubits and ensembles thereof are promising candidates for sensing chemical analytes. Here, we show quantum sensing of lithium ions in solution at room temperature with an ensemble of organic radicals integrated in a microporous metal-organic framework (MOF). The organic radicals exhibit electron spin coherence and microwave addressability at room temperature, thus behaving as qubits. The high surface area of the MOF promotes accessibility of the guest analytes to the organic qubits, enabling unambiguous identification of lithium ions and quantitative measurement of their concentration through relaxometric and hyperfine spectroscopic methods based on electron paramagnetic resonance (EPR) spectroscopy. The sensing principle presented in this work is applicable to other metal ions with nonzero nuclear spin.
RESUMO
Cucumber (Cucumis sativus L.) is an important vegetable crop that carries on vegetative growth and reproductive growth simultaneously. Indeterminate growth is favourable for fresh market under protected environments, whereas determinate growth is preferred for pickling cucumber in the once-over mechanical harvest system. The genetic basis of determinacy is largely unknown in cucumber. In this study, map-based cloning of the de locus showed that the determinate growth habit is caused by a non-synonymous SNP in CsTFL1CsTFL1 is expressed in the subapical regions of the shoot apical meristem, lateral meristem and young stems. Ectopic expression of CsTFL1 rescued the terminal flower phenotype in the Arabidopsis tfl1-11 mutant and delayed flowering in wild-type Arabidopsis Knockdown of CsTFL1 resulted in determinate growth and formation of terminal flowers in cucumber. Biochemical analyses indicated that CsTFL1 interacts with a homolog of the miRNA biogenesis gene CsNOT2a; CsNOT2a interacts with FDP. Cucumber CsFT directly interacts with CsNOT2a and CsFD, and CsFD interacts with two 14-3-3 proteins. These data suggest that CsTFL1 competes with CsFT for interaction with CsNOT2a-CsFDP to inhibit determinate growth and terminal flower formation in cucumber.
Assuntos
Cucumis sativus , Flores/crescimento & desenvolvimento , Flores/genética , Fatores Genéricos de Transcrição/metabolismo , Arabidopsis/genética , Proteínas de Arabidopsis/genética , Proteínas de Arabidopsis/metabolismo , Sequência Conservada , Cucumis sativus/genética , Cucumis sativus/crescimento & desenvolvimento , Flores/metabolismo , Regulação da Expressão Gênica de Plantas , Redes Reguladoras de Genes , Genes de Plantas , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Proteínas de Plantas/fisiologia , Plantas Geneticamente Modificadas , Polimorfismo de Nucleotídeo Único , Ligação ProteicaRESUMO
Electrically conducting 2D metal-organic frameworks (MOFs) have attracted considerable interest, as their hexagonal 2D lattices mimic graphite and other 2D van der Waals stacked materials. However, understanding their intrinsic properties remains a challenge because their crystals are too small or of too poor quality for crystal structure determination. Here, we report atomically precise structures of a family of 2D π-conjugated MOFs derived from large single crystals of sizes up to 200 µm, allowing atomic-resolution analysis by a battery of high-resolution diffraction techniques. A designed ligand core rebalances the in-plane and out-of-plane interactions that define anisotropic crystal growth. We report two crystal structure types exhibiting analogous 2D honeycomb-like sheets but distinct packing modes and pore contents. Single-crystal electrical transport measurements distinctively demonstrate anisotropic transport normal and parallel to the π-conjugated sheets, revealing a clear correlation between absolute conductivity and the nature of the metal cation and 2D sheet packing motif.
RESUMO
Fruit spine is an important trait in cucumber, affecting not only commercial quality, but also fruit smoothness, transportation and storage. Spine size is determined by a multi-cellular base. However, the molecular mechanism underlying the regulation of cucumber spine base remains largely unknown. Here, we report map-based cloning and characterization of a spine base size 1 (SBS1) gene, encoding a C2H2 zinc-finger transcription factor. Near-isogenic lines of cucumber were used to map, identify and quantify cucumber spine base size 1 (CsSBS1). Yeast-hybrid, bimolecular fluorescence complementation (BiFC), co-immunoprecipitation (Co-IP) and RNA-sequencing assays were used to explore the molecular mechanism of CsSBS1 in regulating spine base size development. CsSBS1 was specifically expressed in cucumber ovaries with particularly high expression in fruit spines. Overexpression of CsSBS1 resulted in large fruit spine base, while RNA-interference silencing of CsSBS1 inhibited the expansion of fruit spine base. Sequence analysis of natural cucumber accessions revealed that CsSBS1 was lost in small spine base accessions, resulting from a 4895 bp fragment deletion in CsSBS1 locus. CsSBS1 can form a trimeric complex with two positive regulators CsTTG1 and CsGL1 to regulate spine base development through ethylene signaling. A novel regulator network is proposed that the CsGL1/CsSBS1/CsTTG1 complex plays a significant role in regulating spine base formation and size, which offers a strategy for cucumber breeders to develop smooth fruit.
Assuntos
Cucumis sativus , Cucumis sativus/metabolismo , Frutas , Regulação da Expressão Gênica de Plantas , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Tricomas/metabolismoRESUMO
Dynamic nuclear polarization (DNP) is an NMR sensitivity enhancement technique that mediates polarization transfer from unpaired electrons to NMR-active nuclei. Despite its success in elucidating important structural information on biological and inorganic materials, the detailed polarization-transfer pathway from the electrons to the nearby and then the bulk solvent nuclei, and finally to the molecules of interest-remains unclear. In particular, the nuclei in the paramagnetic polarizing agent play significant roles in relaying the enhanced NMR polarizations to more remote nuclei. Despite their importance, the direct NMR observation of these nuclei is challenging because of poor sensitivity. Here, we show that a combined DNP and electron decoupling approach can facilitate direct NMR detection of these nuclei. We achieved an â¼80 % improvement in NMR intensity via electron decoupling at 0.35â T and 80â K on trityl radicals. Moreover, we recorded a DNP enhancement factor of ϵ ${\varepsilon{} }$ â¼90 and â¼11 % higher NMR intensity using electron decoupling on paramagnetic metal-organic framework, magnesium hexaoxytriphenylene (MgHOTP MOF).
Assuntos
ElétronsRESUMO
KEY MESSAGE: Cp4.1LG15g03420 (CpDsc-1), which encodes a two-component response regulator-like protein (APRR2) in the nucleus, influences dark green stem formation in Cucurbita pepo by regulating the chlorophyll content. Stem color is an important agronomic trait in zucchini (Cucurbita pepo) for robust seeding and high yield. However, the gene controlling the stem color has not been characterized. In this study, we identified a single locus accounting for the dark green stem color of C. pepo (CpDsc-1). Genetic analysis of this trait in segregated populations derived from two parental lines (line 296 with dark green stems and line 274 with light green stems) revealed that stem color was controlled by a single dominant gene (dark green vs. light green). In bulked segregant analysis, CpDsc-1 was mapped to a 2.09-Mb interval on chromosome 15. This region was further narrowed to 65.2 kb using linkage analysis of the F2 population. Sequencing analysis revealed a 14 kb deletion between Cp4.1LG15g03420 and Cp4.1LG15g03360; these two genes both encoded a two-component response regulator-like protein (APRR2). The incomplete structures of the two APRR2 genes and abnormal chloroplasts in line 274 might be the main cause of the light green phenotype. Gene expression pattern analysis showed that only Cp4.1LG15g03420 was upregulated in line 296. Subcellular localization analysis indicated that Cp4.1LG15g03420 was a nuclear gene. Furthermore, a co-dominant marker, G4563 (93% accuracy rate), and a co-segregation marker, Fra3, were established in 111 diverse germplasms; both of these markers were tightly linked with the color trait. This study provided insights into chlorophyll regulation mechanisms and revealed the markers valuable for marker-assisted selection in future zucchini breeding.
Assuntos
Cucurbita , Cucurbita/genética , Mapeamento Cromossômico , Verde de Metila , Melhoramento Vegetal , Ligação GenéticaRESUMO
KEY MESSAGE: A SNP mutation in Clbl gene encoding TERMINAL FLOWER 1 protein is responsible for watermelon branchless. Lateral branching is one of the most important traits, which directly determines plant architecture and crop productivity. Commercial watermelon has the characteristics of multiple lateral branches, and it is time-consuming and labor-costing to manually remove the lateral branches in traditional watermelon cultivation. In our present study, a lateral branchless trait was identified in watermelon material WCZ, and genetic analysis revealed that it was controlled by a single recessive gene, which named as Clbl (Citrullus lanatus branchless). A bulked segregant sequencing (BSA-seq) and linkage analysis was conducted to primarily map Clbl on watermelon chromosome 4. Next-generation sequencing-aided marker discovery and a large mapping population consisting of 1406 F2 plants were used to further map Clbl locus into a 9011-bp candidate region, which harbored only one candidate gene Cla018392 encoding a TERMINAL FLOWER 1 protein. Sequence comparison of Cla018392 between two parental lines revealed that there was a SNP detected from C to A in the coding region in the branchless inbred line WCZ, which resulted in a mutation from alanine (GCA) to glutamate (GAA) at the fourth exon. A dCAPS marker was developed from the SNP locus, which was co-segregated with the branchless phenotype in both BC1 and F2 population, and it was further validated in 152 natural watermelon accessions. qRT-PCR and in situ hybridization showed that the expression level of Cla018392 was significantly reduced in the axillary bud and apical bud in branchless line WCZ. Ectopic expression of ClTFL1 in Arabidopsis showed an increased number of lateral branches. The results of this study will be helpful for better understanding the molecular mechanism of lateral branch development in watermelon and for the development of marker-assisted selection (MAS) for new branchless watermelon cultivars.
Assuntos
Citrullus/crescimento & desenvolvimento , Genes de Plantas , Proteínas de Plantas/fisiologia , Mapeamento Cromossômico , Cromossomos de Plantas , Citrullus/genética , Cruzamentos Genéticos , Marcadores Genéticos , Fenótipo , Melhoramento Vegetal , Proteínas de Plantas/genéticaRESUMO
Raman spectroscopy is an indispensable tool in the analysis of microplastics smaller than 20 µm. However, due to its limitation, Raman spectroscopy may be incapable of effectively distinguishing microplastics from micro additive particles. To validate this hypothesis, we characterized and compared the Raman spectra of six typical slip additives with polyethylene and found that their hit quality index values (0.93-0.96) are much higher than the accepted threshold value (0.70) used to identify microplastics. To prevent this interference, a new protocol involving an alcohol treatment step was introduced to successfully eliminate additive particles and accurately identify microplastics. Tests using the new protocol showed that three typical plastic products (polyethylene pellets, polyethylene bottle caps, and polypropylene food containers) can simultaneously release microplastic-like additive particles and microplastics regardless of the plastic type, daily-use scenario, or service duration. Micro additive particles can also adsorb onto and modify the surfaces of microplastics in a manner that may potentially increase their health risks. This study not only reveals the hidden problem associated with the substantial interference of additive particles in microplastic detection but also provides a cost-effective method to eliminate this interference and a rigorous basis to quantify the risks associated with microplastic exposure.
Assuntos
Microplásticos , Poluentes Químicos da Água , Monitoramento Ambiental/métodos , Plásticos/química , Polietileno/química , Polipropilenos/análise , Polipropilenos/química , Análise Espectral Raman , Poluentes Químicos da Água/químicaRESUMO
The development of a reusable and low-cost urine glucose sensor can benefit the screening and control of diabetes mellitus. This study focused on the feasibility of employing microbial fuel cells (MFC) as a selective glucose sensor for continuous monitoring of glucose levels in human urine. Using MFC technology, a novel cylinder sensor (CS) was developed. It had a quick response time (100 s), a large detection range (0.3-5 mM), and excellent accuracy. More importantly, the CS could last for up to 5 months. The selectivity of the CS was validated by both synthetic and actual diabetes-negative urine samples. It was found that the CS's selectivity could be significantly enhanced by adjusting the concentration of the culture's organic matter. The CS results were comparable to those of a commercial glucose meter (recovery ranged from 93.6% to 127.9%) when the diabetes-positive urine samples were tested. Due to the multiple advantages of high stability, low cost, and high sensitivity over urine test strips, the CS provides a novel and reliable approach for continuous monitoring of urine glucose, which will benefit diabetes assessment and control.
Assuntos
Glicemia , Diabetes Mellitus Tipo 1 , Automonitorização da Glicemia/métodos , Diabetes Mellitus Tipo 1/tratamento farmacológico , Glucose , Humanos , Sistemas de Infusão de InsulinaRESUMO
OBJECTIVES: Non-small cell lung cancer (NSCLC) accounts for 85% of all lung cancer, with highmorbidity and mortality rate. Nove drug development for NSCLC is urgently needed.This study aims to investigate the activity of lathyrol derivatives and the mechanism for its inhibitory effect on the growth of NSCLC cells. METHODS: Three lathyrol derivatives were synthesized from lathyrol and their structures were verified by nuclear magnetic resonance. MTT assay was used to detect the effects of the lathyrol derivatives on the proliferation activity of NSCLC cells (A549 and H1299 cells), and the compound with the best activity was selected for subsequent experiments. Colony forming assay, wound-healing assay, and transwell assay were applied to detect in vitro cell proliferation, migration and invasion ability in A549 and H1299 cells, respectively. Quantitative real-time RT-PCR and Western blotting were performed to detect mRNA and protein levels of E-cadherin, N-cadherin, ß-catenin, and MMP2 in A549 cells, respectively. RESULTS: Three lathyrol derivatives inhibited the growth of A549 and H1299 cells in a dose-dependent manner, and they showed a weak inhibitory effect on normal cells Beas-2B and 16HBE, indicating that they possessed certain selective toxic effects. Therefore, C-5 benzoylated lathyrol with the best activity was selected as the ideal drug for the subsequent experiments. Compared with the control group, the number and size of cell clusters in the treatment group of A549 and H1299 cells were significantly decreased, the relative mobility were significantly decreased, and the number of invaded cells were significantly decreased (all P<0.05), indicating that the in vitro cell proliferation, migration and invasion ability were decreased. The mRNA levels of integrin α2, integrin ß1, MMP2, MMP9, ß-catenin, and N-cadherin were decreased, while the expression of E-cadherin was increased (all P<0.05). The protein levels of N-cadherin, ß-catenin, MMP2, and integrin αV were decreased, while the expression of E-cadherin was increased (all P<0.05). CONCLUSIONS: The lathyrol derivatives synthesized in this study possess good inhibitory activity against NSCLC. Among them, C-5 benzoylated lathyrol significantly inhibits the proliferation, migration, and invasion ability of NSCLC cells in vitro through regulating the process of epithelial-mesenchymal transition.