RESUMO
We demonstrate tunable high-power, high-energy Raman solitons with the range of 1.9-2.3â µm in large mode area (LMA) fibers and an optimized fundamental-mode matching technique for coupling LMA silica fibers. Finally, we obtained Raman solitons with a maximum output power of 5.8 W and a maximum pulse energy of 105 nJ in a LMA passive fiber with 32â µm core diameter, the tuning range of Raman soliton is 1.96-2.35â µm. In addition, we obtained Raman solitons with a maximum output power of 7.3 W and a maximum pulse energy of 126 nJ in a LMA passive fiber with 48â µm core diameter, the tuning range of Raman soliton is 1.96-2.27â µm. The output power of 7.3 W is the highest Raman soliton power currently available in silica fibers, and the result fills a gap in the generation of both high-power and high-energy Raman solitons in a LMA silica fiber.
RESUMO
We report high-power pedestal-free ultrashort pulses in a cascade compression system. In the self-compression stage, the 2â µm ultrashort pulses with 123â fs duration and up to 21.7â W output power were obtained in a 0.3â m 50â µm core diameter fiber. It is the highest self-compressing power ever obtained in a silica fiber with an all-fiber 2â µm laser amplifier as the pump source. To obtain purer pedestal-eliminated pulses, we further increase the fiber length to 1â m to trigger the soliton self-frequency shifting (SSFS) effect. By employing an enhanced SSFS technique based on third-order dispersion (TOD) and filtering out the unshifted signal light, we finally achieved sub-150â fs, 10â W-class, 1.2-MW peak-power, pedestal-free 2.07â µm ultrashort pulses. This is also the highest, to the best of our knowledge, power and energy of Raman soliton obtained by SSFS in an ordinary silica fiber.
RESUMO
In this Letter, a high-power all-fiber mid-infrared (MIR) supercontinuum (SC) laser source based on 9 cm long germania-core fiber (GCF) pumped by a high-power thulium-doped fiber amplifier is presented. As the pump power was set as 60 W, we obtained a 21.34 W broadband SC source extending from 1742 to 3512 nm with a slope efficiency of 32.5%. The 10 dB spectral bandwidth was over 1000 nm, spanning 1.97 to 3.04 µm. Furthermore, the numerical simulation of SC generation in GCF was in good agreement with the experimental results. As far as we know, this is the highest average output power over 3.5 µm in GCF based on a MIR SC laser source.
RESUMO
In this Letter, we demonstrate 22.7 W mid-infrared (MIR) supercontinuum (SC) generation in all-solid fluorotellurite fibers. All-solid fluorotellurite fibers based on ${{\rm TeO}_2} {\text -} {{\rm BaF}_2}{\text -}{{\rm Y}_2}{{\rm O}_3}$TeO2-BaF2-Y2O3 and ${{\rm TeO}_2}$TeO2 modified fluoroaluminate glasses are fabricated by using a rod-in-tube method. By using a 0.6 m long fluorotellurite fiber with a core diameter of 11 µm as the nonlinear medium and a high-power 1.93-2.5 µm SC fiber laser as the pump source, we obtain 22.7 W SC generation from 0.93 to 3.95 µm in the fiber for a pump power of 39.7 W. The 10 dB bandwidth is about 1633 nm, and the corresponding spectral range is from 1890 to 3523 nm. The optical-to-optical conversion efficiency is about 57.2%. Our results show that all-solid fluorotellurite fibers are promising nonlinear media for constructing high-power MIR SC light sources.
RESUMO
Fluorotellurite microstructured fibers (MFs) based on TeO2-BaF2-Y2O3 glasses are fabricated by using a rod-in-tube method. Tapered fluorotellurite MFs with varied transition region lengths are prepared by employing an elongation machine. By using a tapered fluorotellurite MF with a transition region length of â¼3.3 cm as the nonlinear medium and a 1560 nm femtosecond fiber laser as the pump source, broadband supercontinuum generation covering from 470 to 2770 nm is obtained. The effects of the transition region length of the tapered fluorotellurite MF on supercontinuum generation are also investigated. Our results show that tapered fluorotellurite MFs are promising nonlinear media for generating broadband supercontinuum light expanding from visible to mid-infrared spectral region.
RESUMO
Holmium (Ho3+)-doped fluorotellurite microstructured fibers based on TeO2-BaF2-Y2O3 glasses are fabricated by using a rod-in-tube method. By using a 1.992 µm fiber laser as the pump source, lasing at 2.077 µm is obtained from a 27 cm long Ho3+-doped fluorotellurite microstructured fiber. The maximum unsaturated power is about 161 mW and the corresponding slope efficiency is up to 67.4%. The influence of fiber length on lasing at 2.1 µm is also investigated. Our results show that Ho3+-doped fluorotellurite microstructured fibers are promising gain media for 2.1 µm laser applications.
Assuntos
Hólmio/química , Lasers , Fibras Ópticas , Telúrio/químicaRESUMO
UDP-glucose pyrophosphorylase (UGP, EC 2.7.7.9) is an essential enzyme involved in carbohydrate metabolism. In Saccharomyces cerevisiae and other fungi, the UGP gene is indispensable for normal cell development, polysaccharide synthesis, and stress response. However, the function of the UGP homolog in plant pathogenic fungi has been rarely explored during pathogenesis. In this study, we characterize a UGP homolog named VdUGP from Verticillium dahliae, a soil-borne fungus that causes plant vascular wilt. In comparison with wild-type strain V07DF2 and complementation strains, the VdUGP knocked down mutant 24C9 exhibited sensitivity to sodium dodecyl sulfate (perturbing membrane integrity) and high sodium chloride concentration (high osmotic pressure stress). More than 25 % of the conidia of the mutant developed into short and swollen hypha and formed hyperbranching and compact colonies. The mutant exhibited decreased virulence on cotton and tobacco seedlings. Further investigation determined that the germination of the mutant spores was significantly delayed compared with the wild-type strain on the host roots. RNA-seq analysis revealed that a considerable number of genes encoding secreted proteins and carbohydrate-active enzymes were significantly downregulated in the mutant at an early stage of infection compared with those of the wild-type strain. RNA-seq data indicated that mutation affected many Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways both in the pathogen and in the inoculated plants at the infection stage. These alterations of the mutant in cultural phenotypes, virulence, and gene expression profiles clearly indicated that VdUGP played important roles in fungal cell morphogenesis, stress responses, and host infection.
Assuntos
Ascomicetos , Proteínas Fúngicas , Interações Hospedeiro-Patógeno , Estresse Fisiológico , UTP-Glucose-1-Fosfato Uridililtransferase , Ascomicetos/citologia , Ascomicetos/enzimologia , Ascomicetos/patogenicidade , Ascomicetos/fisiologia , Proteínas Fúngicas/metabolismo , Gossypium/microbiologia , Morfogênese , Doenças das Plantas/microbiologia , Plântula/microbiologia , Estresse Fisiológico/fisiologia , Nicotiana/microbiologia , UTP-Glucose-1-Fosfato Uridililtransferase/metabolismoRESUMO
Neonicotinoid insecticide pollution in soil and water poses serious environmental risks. Microbial biodegradation is an important neonicotinoid insecticide degradation pathway in the environment. In this study, 70.0% of the acetamiprid in a 200 mg/L solution was degraded by actinomycetes Streptomyces canus CGMCC 13662 (isolated from soil) in 48 h, and the acetamiprid degradation half-life was 27.7 h. Acetamiprid was degraded to IM-1-2 (( E)-1-(1-(((6-chloropyridin-3-yl)methyl)(methyl) amino)ethylidene)urea) through hydrolysis of the cyanoimine moiety. Gene cloning and overexpression indicated that a novel nitrile hydratase with three unusual subunits (AnhD, AnhE, and AnhA) without accessory protein mediated IM-1-2 formation. The purified nitrile hydratase responsible for degrading acetamiprid had a Km of 5.85 mmol/L and a Vmax of 15.99 U/mg. A homology model suggested that AnhD-Glu56 and AnhE-His21 play important roles in the catalytic efficiency of the nitrile hydratase. S. canus CGMCC 13662 could be used to remediate environments contaminated with acetamiprid.