Direct-growth carbon nanotubes on 3D structural microelectrodes for electrophysiological recording.

A novel 3D carbon nanotube (CNT) microelectrode was developed through direct growth of CNTs on a gold pin-shaped 3D microelectrode at a low temperature (400 °C) for applications in neural and cardiac recording. With an electroplated Ni catalyst layer covering the entire surface of the pin-shaped structure, CNTs were synthesized on a 3D microelectrode by catalytic thermal chemical vapor deposition (CVD). According to the analyses by electrochemical impedance spectroscopy, the impedance of 3D microelectrodes after CNT growth and UV/O3 treatment decreased from 9.3 Ω mm(-2) to 1.2 Ω mm(-2) and the capacitance increased largely from 2.2 mF cm(-2) to 73.3 mF cm(-2). The existence of UVO3-treated CNT led to a large improvement of interfacial capacitance, contributing to the decrease of impedance. The electrophysiological detection capability of this 3D CNT microelectrode was demonstrated by the distinguished P waves, QRS complex and T waves in the electrocardiogram of the zebrafish heart and the action potential recorded from individual rat hippocampal neurons. The compatibility of integration with ICs, high resolution in space, electrophysiological signals, and non-invasive long-term recording suggest that the 3D CNT microelectrode exhibits promising potential for applications in electrophysiological research and clinical trials.

A flexible hydrophilic-modified graphene microprobe for neural and cardiac recording.

A graphene-based flexible microprobe developed by microelectromechanical system technology shows high resolution for the detection of electrophysiological signals from various bio-objects. The hydrophilization post-treatment using steam plasma was performed on the graphene surface to decrease the interfacial impedance between graphene and electrolyte, and thus improve the signal-to-noise ratio during neural and cardiac recording. The signal-to-noise ratio of the action potentials from axons of a crayfish measured by hydrophilic-modified graphene microprobe (27.8±4.0dB) is higher than that of untreated device (20.3±3.3dB). Also, the form of the QRS complex and T wave in the electrocardiogram of the zebrafish heart can be clearly distinguished using the modified device. The total measured noise levels of the overall stability of the system were 4.2µVrms (hydrophilic graphene) and 7.64µVrms (hydrophobic graphene). The graphene-based implant can be further used for in vivo, long-term recording and retina prosthesis. FROM THE CLINICAL EDITOR: In this study a graphene-based flexible microprobe developed using microelectromechanical system technology was demonstrated to enable high resolution detection of electrophysiological signals, including EKG in zebrafish models. Both hydrophilic and hydrophobic graphene were studied, paving the way to potential future clinical applications of this new technology.

Lactiplantibacillus plantarum PS128 Alleviates Exaggerated Cortical Beta Oscillations and Motor Deficits in the 6-Hydroxydopamine Rat Model of Parkinson's Disease.

Parkinson's disease (PD) is a neurodegenerative disorder characterized by midbrain dopaminergic neuronal loss and subsequent physical impairments. Levodopa manages symptoms best, while deep brain stimulation (DBS) is effective for advanced PD patients; however, side effects occur with the diminishing therapeutic window. Recently, Lactiplantibacillus plantarum PS128 (PS128) was found to elevate dopamine levels in rodent brains, suggesting its potential to prevent PD. Here, the therapeutic efficacy of PS128 was examined in the 6-hydroxydopamine rat PD model. Suppression of the power spectral density of beta oscillations (beta PSD) in the primary motor cortex (M1) was recorded as the indicator of disease progression. We found that 6 weeks of daily PS128 supplementation suppressed M1 beta PSD as well as did levodopa and DBS. Long-term normalization of M1 beta PSD was found in PS128-fed rats, whereas levodopa and DBS showed only temporal effects. PS128 + levodopa and PS128 + DBS exhibited better therapeutic effects than did levodopa + DBS or either alone. Significantly improved motor functions in PS128-fed rats were correlated with normalization of M1 beta PSD. Brain tissue analyses further demonstrated the role of PS128 in dopaminergic neuroprotection and the enhanced availability of neurotransmitters. These findings suggest that psychobiotic PS128 might be used alongside conventional therapies to treat PD patients.

Abi plays an opposing role to Abl in Drosophila axonogenesis and synaptogenesis.

Abl tyrosine kinase (Abl) regulates axon guidance by modulating actin dynamics. Abelson interacting protein (Abi), originally identified as a kinase substrate of Abl, also plays a key role in actin dynamics, yet its role with respect to Abl in the developing nervous system remains unclear. Here we show that mutations in abi disrupt axonal patterning in the developing Drosophila central nervous system (CNS). However, reducing abi gene dosage by half substantially rescues Abl mutant phenotypes in pupal lethality, axonal guidance defects and locomotion deficits. Moreover, we show that mutations in Abl increase synaptic growth and spontaneous synaptic transmission frequency at the neuromuscular junction. Double heterozygosity for abi and enabled (ena) also suppresses the synaptic overgrowth phenotypes of Abl mutants, suggesting that Abi acts cooperatively with Ena to antagonize Abl function in synaptogenesis. Intriguingly, overexpressing Abi or Ena alone in cultured cells dramatically redistributed peripheral F-actin to the cytoplasm, with aggregates colocalizing with Abi and/or Ena, and resulted in a reduction in neurite extension. However, co-expressing Abl with Abi or Ena redistributed cytoplasmic F-actin back to the cell periphery and restored bipolar cell morphology. These data suggest that abi and Abl have an antagonistic interaction in Drosophila axonogenesis and synaptogenesis, which possibly occurs through the modulation of F-actin reorganization.

Hydrophilic modification of neural microelectrode arrays based on multi-walled carbon nanotubes.

To decrease the impedance of microelectrode arrays, for neuroscience applications we have fabricated and tested MEA based on multi-walled carbon nanotubes. With decreasing physical size of a microelectrode, its impedance increases and charge-transfer capability decreases. To decrease the impedance, the effective surface area of the electrode must generally be increased. We explored the effect of plasma treatment on the surface wettability of MWCNT. With a steam-plasma treatment the surface of MWCNT becomes converted from superhydrophobic to superhydrophilic; this hydrophilic property is attributed to -OH bonding on the surface of MWCNT. We reported the synthesis at 400 °C of MWCNT on nickel-titanium multilayered metal catalysts by thermal chemical vapor deposition. Applying plasma with a power less than 25 W for 10 s improved the electrochemical and biological properties, and circumvented the limitation of the surface reverting to a hydrophobic condition; a hydrophilic state is maintained for at least one month. The MEA was used to record neural signals of a lateral giant cell from an American crayfish. The response amplitude of the action potential was about 275 µV with 1 ms period; the recorded data had a ratio of signal to noise up to 40.12 dB. The improved performance of the electrode makes feasible the separation of neural signals and the recognition of their distinct shapes. With further development the rapid treatment will be useful for long-term recording applications.

A Computationally-Efficient, Online-Learning Algorithm for Detecting High-Voltage Spindles in the Parkinsonian Rats.

Abnormally-synchronized, high-voltage spindles (HVSs) are associated with motor deficits in 6-hydroxydopamine-lesioned parkinsonian rats. The non-stationary, spike-and-wave HVSs (5-13 Hz) represent the cardinal parkinsonian state in the local field potentials (LFPs). Although deep brain stimulation (DBS) is an effective treatment for the Parkinson's disease, continuous stimulation results in cognitive and neuropsychiatric side effects. Therefore, an adaptive stimulator able to stimulate the brain only upon the occurrence of HVSs is demanded. This paper proposes an algorithm not only able to detect the HVSs with low latency but also friendly for hardware realization of an adaptive stimulator. The algorithm is based on autoregressive modeling at interval, whose parameters are learnt online by an adaptive Kalman filter. In the LFPs containing 1131 HVS episodes from different brain regions of four parkinsonian rats, the algorithm detects all HVSs with 100% sensitivity. The algorithm also achieves higher precision (96%) and lower latency (61 ms), while requiring less computation time than the continuous wavelet transform method. As the latency is much shorter than the mean duration of an HVS episode (4.3 s), the proposed algorithm is suitable for realization of a smart neuromodulator for mitigating HVSs effectively by closed-loop DBS.

Induction of high-frequency oscillations in a junction-coupled network.

Rhythmic oscillations of up to 600 Hz in grouped neurons frequently occur in the brains of animals. These high-frequency oscillations can be sustained in calcium-free conditions and may be blocked by gap junction blockers, implying a key role for electrical synapses in oscillation generation. Mathematical theories have been developed to demonstrate oscillations mediated by electrical synapses without chemical modulation; however, these models have not been verified in animals. Here we report that oscillations of up to 686 Hz are induced by paired spikes of short spike intervals (SIs) in a junction-coupled network. To initiate oscillations, it was essential that the second spike was elicited during the relative refractory period. The second spike suffered from slow propagation speed and failure to transmit through a low-conductance junction. Thus, at the spike initiation site, paired spikes of short SIs triggered one transjunctional spike in the postsynaptic neuron. At distant synaptic sites, two transjunctional spikes were produced as the SI increased during spike propagation. Consequently, spike collision of these asymmetrical transjunctional spikes occurred in the interconnected network. The remaining single spike reverberated in a network serving as an oscillator center. Paired-spike-induced oscillations were modeled by computer simulation and verified electrophysiologically in a network that mediates the tail-flip escape response of crayfish.

A Battery-Less, Implantable Neuro-Electronic Interface for Studying the Mechanisms of Deep Brain Stimulation in Rat Models.

Although deep brain stimulation (DBS) has been a promising alternative for treating several neural disorders, the mechanisms underlying the DBS remain not fully understood. As rat models provide the advantage of recording and stimulating different disease-related regions simultaneously, this paper proposes a battery-less, implantable neuro-electronic interface suitable for studying DBS mechanisms with a freely-moving rat. The neuro-electronic interface mainly consists of a microsystem able to interact with eight different brain regions bi-directionally and simultaneously. To minimize the size of the implant, the microsystem receives power and transmits data through a single coil. In addition, particular attention is paid to the capability of recording neural activities right after each stimulation, so as to acquire information on how stimulations modulate neural activities. The microsystem has been fabricated with the standard 0.18 µm CMOS technology. The chip area is 7.74 mm (2) , and the microsystem is able to operate with a single supply voltage of 1 V. The wireless interface allows a maximum power of 10 mW to be transmitted together with either uplink or downlink data at a rate of 2 Mbps or 100 kbps, respectively. The input referred noise of recording amplifiers is 1.16 µVrms, and the stimulation voltage is tunable from 1.5 V to 4.5 V with 5-bit resolution. After the electrical functionality of the microsystem is tested, the capability of the microsystem to interface with rat brain is further examined and compared with conventional instruments. All experimental results are presented and discussed in this paper.

Glutamate-gated chloride channels inhibit juvenile hormone biosynthesis in the cockroach, Diploptera punctata.

Juvenile hormone (JH) synthesized and released from endocrine gland corpus allatum (CA) plays an important role in insect metamorphosis, vitellogenesis and reproduction. Glutamate is a major neurotransmitter in the nervous system and its activated receptors possess excitatory and inhibitory forms in muscle fibers of invertebrates. Previously, we have shown that the rise of intracellular calcium through excitatory glutamate receptors, N-methyl-d-aspartate (NMDA) and non-NMDA-type channels stimulates JH synthesis in the cockroach, Diploptera punctata. Here, we demonstrate the occurrence of inhibitory chloride permeable glutamate (GluCl) receptors on CA cell membranes. Application of the GluCl channel activators, ibotenic acid (Ibo) and ivermectin, but not gamma-aminobutyric acid caused a decline in JH synthesis in glands of either high or low activity during the gonadotrophic cycle. Also, while recording the membrane potential of the isolated whole CA glands intracellularly, Ibo induced a hyperpolarizated response. Both changes in the membrane potential and inhibition of JH synthesis could be abolished by the application of the chloride channel blocker picrotoxin. Finally, we found both excitatory and inhibitory glutamate receptors cause antagonistic effects on rates of JH synthesis. These results indicate a novel function of GluCl channels in the inhibition of JH synthesis that could be a potential pathway for developing a new generation of insecticides.

Integration of silicon-via electrodes with different recording characteristics on a glass microprobe using a glass reflowing process.

Electrodes on planar type microelectromechanical system (MEMS) microprobes mainly record neurons on the top-side of probe shaft (called a top-side electrode). However, it is often necessary to record neurons other than those on the top-side of the probe shaft. This study uses the glass reflowing technique to embed silicon-vias in a glass probe to implement a microprobe capable of recording neurons around the shaft. The proposed technology makes it possible to fabricate, distribute, and integrate four types of electrodes on the shaft: top-side, back-side, double-side, and sidewall electrodes. These electrodes have different recording characteristics. The in vitro and in vivo (using crayfish and rat brain) experiments in this study shows that the top-side and back-side electrodes are respectively more sensitive to neurons on the top-side and back-side of the probe shaft. In contrast, signals recorded by double-side electrode and sidewall electrode are equally sensitive to neurons around the probe shaft. This study enables the implementation and integration of these four types of electrodes, meeting the requirements of various neural applications.

A three-dimensional flexible microprobe array for neural recording assembled through electrostatic actuation.

We designed, fabricated and tested a novel three-dimensional flexible microprobe to record neural signals of a lateral giant nerve fiber of the escape circuit of an American crayfish. An electrostatic actuation folded planar probes into three-dimensional neural probes with arbitrary orientations for neuroscientific applications. A batch assembly based on electrostatic forces simplified the fabrication and was non-toxic. A novel fabrication for these three-dimensional flexible probes used SU-8 and Parylene technology. The mechanical strength of the neural probe was great enough to penetrate into a bio-gel. A flexible probe both decreased the micromotion and alleviated tissue encapsulation of the implant caused by chronic inflammation of tissue when an animal breathes or moves. The cortex consisted of six horizontal layers, and the neurons of the cortex were arranged in vertical structures; the three-dimensional microelectrode arrays were suitable to investigate the cooperative activity for neurons in horizontal separate layers and in vertical cortical columns. With this flexible probe we recorded neural signals of a lateral giant cell from an American crayfish. The response amplitude of action potentials was about 343 µV during 1 ms period; the average recorded data had a ratio of signal to noise as great as 30.22 ± 3.58 dB. The improved performance of this electrode made feasible the separation of neural signals according to their distinct shapes. The cytotoxicity indicated a satisfactory biocompatibility and non-toxicity of the flexible device fabricated in this work.

The enhancement of neural growth by amino-functionalization on carbon nanotubes as a neural electrode.

This paper reports the success of amino-functionalization on multi-walled carbon nanotubes (MWCNTs) to promote neuronal cells growth on MWCNT electrode for extracellular recording, attributed to the formation of positive charge of NH(2) molecules on their surfaces. Besides, the surface of MWCNT electrode becomes hydrophilic after amino-functionalization (AF-MWCNTs) which can enhance electrical conductivity because of lower MWCNT/electrolyte interfacial impedance and higher interfacial capacitance. Durability tests show that electrical characteristics of the MWCNTs treated by 2 wt% 1,4-diaminobutane solution (2 wt%-AF-MWCNTs) can last for at least six months in air ambient. The neural recording of crayfish shows that 2 wt%-AF-MWCNTs can provide better capability on detecting action potentials of caudal photoreceptor (CPR) interneuron compared to suction glass pipette from the evidence of a higher S/N ratio (126 versus 23). The amino-functionalized MWCNT electrode is feasible for long-term recording application according to the results of biocompatibility tests. As the MWCNTs were directly synthesized on Si-based substrates by catalyst-assisted thermal chemical vapor deposition (CVD) at a low temperature (400 °C), these self-aligned MWCNT electrodes could be friendly implemented in integrated circuits fabrications.

An active, flexible carbon nanotube microelectrode array for recording electrocorticograms.

A variety of microelectrode arrays (MEAs) has been developed for monitoring intra-cortical neural activity at a high spatio-temporal resolution, opening a promising future for brain research and neural prostheses. However, most MEAs are based on metal electrodes on rigid substrates, and the intra-cortical implantation normally causes neural damage and immune responses that impede long-term recordings. This communication presents a flexible, carbon-nanotube MEA (CMEA) with integrated circuitry. The flexibility allows the electrodes to fit on the irregular surface of the brain to record electrocorticograms in a less invasive way. Carbon nanotubes (CNTs) further improve both the electrode impedance and the charge-transfer capacity by more than six times. Moreover, the CNTs are grown on the polyimide substrate directly to improve the adhesion to the substrate. With the integrated recording circuitry, the flexible CMEA is proved capable of recording the neural activity of crayfish in vitro, as well as the electrocorticogram of a rat cortex in vivo, with an improved signal-to-noise ratio. Therefore, the proposed CMEA can be employed as a less-invasive, biocompatible and reliable neuro-electronic interface for long-term usage.

A cone-shaped 3D carbon nanotube probe for neural recording.

A novel cone-shaped 3D carbon nanotube (CNT) probe is proposed as an electrode for applications in neural recording. The electrode consists of CNTs synthesized on the cone-shaped Si (cs-Si) tip by catalytic thermal chemical vapor deposition (CVD). This probe exhibits a larger CNT surface area with the same footprint area and higher spatial resolution of neural recording compared to planar-type CNT electrodes. An approach to improve CNT characteristics by O(2) plasma treatment to modify the CNT surface will be also presented. Electrochemical characterization of O(2) plasma-treated 3D CNT (OT-CNT) probes revealed low impedance per unit area (∼64.5 Ω mm(-2)) at 1 kHz and high specific capacitance per unit area (∼2.5 mF cm(-2)). Furthermore, the OT-CNT probes were employed to record the neural signals of a crayfish nerve cord. Our findings suggest that OT-CNT probes have potential advantages as high spatial resolution and superb electrochemical properties which are suitable for neural recording applications.

Flexible carbon nanotubes electrode for neural recording.

This paper demonstrates a novel flexible carbon nanotubes (CNTs) electrode array for neural recording. In this device, the CNTs electrode arrays are partially embedded into the flexible Parylene-C film using a batch microfabrication process. Through this fabrication process, the CNTs can be exposed to increase the total sensing area of an electrode. Thus, the flexible CNTs electrode of low impedance is realized. In application, the flexible CNTs electrode has been employed to record the neural signal of a crayfish nerve cord for in vitro recording. The measurements demonstrate the superior performance of the presented flexible CNTs electrode with low impedance (11.07 kohms at 1 kHz) and high peak-to-peak amplitude action potential (about 410 microV). In addition, the signal-to-noise ratio (SNR) of the presented flexible CNTs electrode is about 257, whereas the SNR of the reference (a pair of Teflon-coated silver wires) is only 79. The simultaneous recording of the flexible CNTs electrode array is also demonstrated. Moreover, the flexible CNTs electrode has been employed to successfully record the spontaneous spikes from the crayfish nerve cord. The amplitude of the spontaneous peak-to-peak response is about 25 microV.

Micro-multi-probe electrode array to measure neural signals.

A multi-electrode array (MEA) with 16 channels was designed to record simultaneously the velocity of conduction of neurons in a measurement system for bio-medical applications. MEA were fabricated with MEMS technology on a silicon-on-insulator (SOI) wafer, which controls the thickness of the probe effectively. All used probes have length 3mm and width 100mum. The thickness of the probe, 25mum, was defined by the thickness of the device layer on the SOI wafer. The multiple probes with a 16-site recording electrode array have been manufactured; their strength was tested with a force gauge and their electrical performance was tested with an impedance measurement system. The readout circuitry comprises an array of 16-site preamplifiers fully integrated on a chip that is capable of signal processing to improve the signal-noise-ratio (SNR). To demonstrate the capability, multiple neural signals were recorded simultaneously with all electrodes from each separate probe. To verify its capability of measuring neural signals, the MEA was used to measure these signals from the electrophysiology system of crayfish. The velocity of neural conduction recorded with a fabricated MEA is shown, and is comparable with a measurement with a traditional glass pipette. The MEA for recording neural signals would be improved in further development.

Interfacing neurons both extracellularly and intracellularly using carbon-nanotube probes with long-term endurance.

This study demonstrates that carbon nanotubes (CNTs) can be fabricated into probes directly, with which neural activity can be monitored and elicited not only extracellularly but also intracellularly. Two types of CNT probes have been made and examined with the escape neural circuit of crayfish, Procambarus clarkia. The CNT probes are demonstrated to have comparable performance to conventional Ag/AgCl (silver/silver cloride) electrodes. Impedance measurement and cyclic voltammetry further indicate that the CNT probes transmit electrical signals through not only capacitive coupling but also resistive conduction. The resistive conduction facilitates the recording of postsynaptic potentials and equilibrium membrane potentials intracellularly as well as the delivery of direct-current stimulation. Furthermore, delivering current stimuli for a long term is found to enhance rather than to degrade the recording capability of the CNT probes. The mechanism of this fruitful result is carefully investigated and discussed. Therefore, our findings here support the suggestion that CNTs are suitable for making biocompatible, durable neural probes of various configurations for diverse applications.

Fak56 functions downstream of integrin alphaPS3betanu and suppresses MAPK activation in neuromuscular junction growth.

BACKGROUND: Focal adhesion kinase (FAK) functions in cell migration and signaling through activation of the mitogen-activated protein kinase (MAPK) signaling cascade. Neuronal function of FAK has been suggested to control axonal branching; however, the underlying mechanism in this process is not clear. RESULTS: We have generated mutants for the Drosophila FAK gene, Fak56. Null Fak56 mutants display overgrowth of larval neuromuscular junctions (NMJs). Localization of phospho-FAK and rescue experiments suggest that Fak56 is required in presynapses to restrict NMJ growth. Genetic analyses imply that FAK mediates the signaling pathway of the integrin alphaPS3betanu heterodimer and functions redundantly with Src. At NMJs, Fak56 downregulates ERK activity, as shown by diphospho-ERK accumulation in Fak56 mutants, and suppression of Fak56 mutant NMJ phenotypes by reducing ERK activity. CONCLUSION: We conclude that Fak56 is required to restrict NMJ growth during NMJ development. Fak56 mediates an extracellular signal through the integrin receptor. Unlike its conventional role in activating MAPK/ERK, Fak56 suppresses ERK activation in this process. These results suggest that Fak56 mediates a specific neuronal signaling pathway distinct from that in other cellular processes.

Metamodulation of the crayfish escape circuit.

Neuromodulation provides a means of changing the excitability of neurons or the effect of synapses, and so extends the performance range of neural circuits. Metamodulation occurs when the neuromodulatory effect is itself modulated, often in response to a change in the behavioral state of the animal. The well-studied neural circuit that mediates escape in the crayfish is modulated by serotonin, and this modulation is subject to two forms of metamodulation. First, the serotonergic modulation of the Lateral Giant (LG) command neuron for escape depends on the pattern of exposure of the cell to serotonin. High and low concentrations, and rapid and slow exposures each produce opposite modulatory effects on sensory-evoked EPSPs in LG. In addition, brief exposures produce transient modulatory effects, whereas longer exposures produce long-term facilitation. These different patterns of exposure may result from serotonin neurotransmission, paracrine transmission, and hormonal release, all of which occur in the vicinity of LG. The second form of metamodulation enables serotonergic modulation to track slow changes in the social status of the crayfish. Slowly applied serotonin facilitates LG's response in socially isolated crayfish and in new dominant and subordinate animals. Facilitation is retained in the dominant animal during two weeks of continuous pairing of the animals, but facilitation gradually changes to inhibition in the subordinate crayfish. These and related changes in serotonin modulation appear to result from changes in the population of serotonin receptors that mediate the modulatory effects in LG. Whereas the exposure-dependent metamodulation enables rapid changes in serotonergic modulation of LG to occur, the status-dependent metamodulation enables serotonergic modulation of LG to track the slow maturation of social relationships.