Evaluation of processing methods and oral mastication on the carotenoid bioaccessibility of restructured carrot chips.

BACKGROUND: Carrot carotenoids are typically located in chromoplasts, forming a crystalline substructure. Cell walls and chromoplasts therefore constitute two major physical barriers to the release of carotenoids from the food matrix during digestion. The release of carotenoids from these physical barriers is supposed to be substantially affected by mechanical factors during food processing and oral mastication. Given the implications of this, the effects of four different processing procedures, and various mastication levels, on the carotenoid bioaccessibility of carrot chips were evaluated. RESULTS: Restructuring and drying methods substantially affected the carotenoid bioaccessibility of carrot chips. The highest carotenoid bioaccessibility was obtained for the air-dried combined with instant pressure-drop-dried (AD-DIC) restructured chips. Although the fresh carrots possessed the highest carotenoid content, their bioaccessibility was lower than that of the carrot chips. The evolution of the particle sizes of the samples was responsible for the changes in carotenoid bioaccessibility due to oral masitication. The particle size of the fresh carrots decreased with increasing oral masitication, which favored carotenoid bioaccessibilty. However, the restructured chips that combined freeze drying with instant pressure-drop drying (R-FD-DIC) demonstrated the opposite trend, probably caused by the severe aggregation of the sample during digestion, which compromised the effect of mastication on the release of carotenoid. CONCLUSION: Data regarding the effects of the drying process and oral mastication digestion behavior on the samples suggested that AD-DIC-dried restructured carrot chips are effective in enhancing carotenoid bioaccessibility, which explains the key factors involved in the release of carotenoids from carrot chips prepared by different processes. © 2020 Society of Chemical Industry.

Comparison of dynamic water distribution and microstructure formation of shiitake mushrooms during hot air and far infrared radiation drying by low-field nuclear magnetic resonance and scanning electron microscopy.

BACKGROUND: An abundance of shiitake mushrooms is consumed in dried form around the world. In the present study, changes in water state, water distribution and microstructure of shiitake mushrooms during hot-air drying (HAD) and far-infrared radiation drying (FIRD) processes were investigated using low-field nuclear magnetic resonance and scanning electron microscopy. Quality attributes of the dried products were compared in terms of drying property, appearance, rehydration behavior, texture and storage stability. RESULTS: Compared with HAD, the rate of water diffusion and evaporation of the shiitake mushrooms dried by FIRD was higher, thus resulting in a shorter drying time (630 min), a lower water content (0.07 g g-1 wet basis) and a higher glass transition temperature (7.88 °C) for dried products. Moreover, a homogenous and porous microstructure with less shrinkage and case hardening was demonstrated by the FIRD samples, indicating a superior texture, including a larger pileus diameter (3.4 cm), a higher rehydration ratio (7.31), a lower hardness (37.93 N) and a higher crispness (1.41 mm) for FIRD shiitake mushrooms. CONCLUSION: High-quality shiitake mushrooms with a desirable texture could be produced by FIRD by enhancing the diffusion of internal water and alleviating the case hardening during a relatively short drying process. © 2018 Society of Chemical Industry.

Apple juice concentrate impregnation enhances nutritional and textural attributes of the instant controlled pressure drop (DIC)-dried carrot chips.

BACKGROUND: Osmotic pretreatment is an effective processing unit for improving the textural quality of dried fruit and vegetable snacks, whereas nutrition loss and high calorie after impregnation is still a noteworthy shortcoming of sugar-immersed products. Therefore, the use of apple juice concentrate as a clean label solution to improve the qualities of instant controlled pressure drop (DIC)-dried carrot chips was investigated. RESULTS: Apple juice concentrate impregnation substantially enhanced the physical properties of the carrot chips, including hardness (38.28 N), crispness (2.01 mm), porosity (66.72%) and homogeneous microstructure, comparable to chips obtained using sucrose and maltiltol based osmotic solutions. Additionally, compared to the sucrose and maltiltol impregnated chips, a higher retention of carotenoids (302.81 µg g-1 , dry basis), a higher multiplicity of phenolic compounds, stronger antioxidant activities and a superior sensory score were observed in the chips pretreated with apple juice concentrate. CONCLUSION: Apple juice concentrate could be used as a clean label osmotic solution to enhance the organoleptic attributes and fortify the nutritional properties of DIC-dried carrot snacks. © 2019 Society of Chemical Industry.

Evaluation of browning ratio in an image analysis of apple slices at different stages of instant controlled pressure drop-assisted hot-air drying (AD-DIC).

BACKGROUND: Computer vision-based image analysis systems are widely used in food processing to evaluate quality changes. They are able to objectively measure the surface colour of various products since, providing some obvious advantages with their objectivity and quantitative capabilities. In this study, a computer vision-based image analysis system was used to investigate the colour changes of apple slices dried by instant controlled pressure drop-assisted hot air drying (AD-DIC). RESULTS: The CIE L* value and polyphenol oxidase activity in apple slices decreased during the entire drying process, whereas other colour indexes, including CIE a*, b*, ΔE and C* values, increased. The browning ratio calculated by image analysis increased during the drying process, and a sharp increment was observed for the DIC process. The change in 5-hydroxymethylfurfural (5-HMF) and fluorescent compounds (FIC) showed the same trend with browning ratio due to Maillard reaction. Moreover, the concentrations of 5-HMF and FIC both had a good quadratic correlation (R2 > 0.998) with the browning ratio. CONCLUSION: Browning ratio was a reliable indicator of 5-HMF and FIC changes in apple slices during drying. The image analysis system could be used to monitor colour changes, 5-HMF and FIC in dehydrated apple slices during the AD-DIC process. © 2016 Society of Chemical Industry.

Comparison of different drying methods on the physical properties, bioactive compounds and antioxidant activity of raspberry powders.

BACKGROUND: Dehydration has been considered as one of the traditional but most effective techniques for perishable fruits. Raspberry powders obtained after dehydration can be added as ingredients into food formulations such as bakery and dairy products. In this study, raspberry powders obtained by hot air drying (HAD), infrared radiation drying (IRD), hot air and explosion puffing drying (HA-EPD), infrared radiation and microwave vacuum drying (IR-MVD) and freeze drying (FD) were compared on physical properties, bioactive compounds and antioxidant activity. RESULTS: Drying techniques affected the physical properties, bioactive compounds and antioxidant activity of raspberry powders greatly. FD led to significantly higher (P < 0.05) values of water solubility (45.26%), soluble solid (63.46%), hygroscopicity (18.06%), color parameters and anthocyanin retention (60.70%) of raspberry powder compared with other drying methods. However, thermal drying techniques, especially combined drying methods, were superior to FD in final total polyphenol content, total flavonoid content and antioxidant activity. The combined drying methods, especially IR-MVD, showed the highest total polyphenol content (123.22 g GAE kg(-1) dw) and total flavonoid content (0.30 g CAE kg(-1) dw). Additionally, IR-MVD performed better in antioxidant activity retention. CONCLUSION: Overall, combined drying methods, especially IR-MVD, were found to result in better quality of raspberry powders among the thermal drying techniques. IR-MVD could be recommended for use in the drying industry because of its advantages in time saving and nutrient retention.

Effect of different drying technologies on drying characteristics and quality of red pepper (Capsicum frutescens L.): a comparative study.

BACKGROUND: Hot air drying and sun drying are traditional drying technologies widely used in the drying of agricultural products for a long time, but usually recognized as time-consuming or producing lower-quality products. Infrared drying is a rather effective drying technology that has advantages over traditional drying technologies. Thus, in order to investigate the application of infrared drying in the dehydration of red pepper, the drying characteristics and quality of infrared-dried red pepper were compared with those of sun-dried and hot air-dried red pepper. RESULTS: The infrared drying technology significantly enhanced the drying rate when compared with hot air drying and sun drying. Temperature was the most important factor affecting the moisture transfer during the process of infrared drying as well as hot air drying. Effective moisture diffusivity (Deff ) values of infrared drying ranged from 1.58 × 10(-9) to 3.78 × 10(-9) m(2) s(-1) . The Ea values of infrared drying and hot air drying were 42.67 and 44.48 kJ mol(-1) respectively. Infrared drying and hot air drying produced color loss to a similar extent. Relatively higher crispness values were observed for infrared-dried samples. CONCLUSION: Sun drying produced dried red pepper with the best color when compared with hot air drying and infrared drying. Meanwhile, infrared drying markedly improved the drying rate at the same drying temperature level of hot air drying, and the products obtained had relatively better quality with higher crispness values. © 2015 Society of Chemical Industry.

Influence of pre-drying treatments on physicochemical and organoleptic properties of explosion puff dried jackfruit chips.

The effects of hot air drying (AD), freeze drying (FD), infrared drying (IR), microwave drying (MV), vacuum drying (VD) as pre-drying treatments for explosion puff drying (EPD) on qualities of jackfruit chips were studied. The lowest total color differences (∆E) were found in the FD-, MV- and VD-EPD dried chips. Volume expansion effect (9.2 %) was only observed in the FD-EPD dried chips, which corresponded to its well expanded honeycomb microstructures and high rehydration rate. Compared with AD-, IR-, MV- and VD-EPD, the FD-EPD dried fruit chips exhibited lower hardness and higher crispness, indicative of a crispier texture. FD-EPD dried fruits also obtained high retentions of ascorbic acid, phenolics and carotenoids compared with that of the other puffed products. The results of sensory evaluation suggested that the FD-EPD was a more beneficial combination because it enhanced the overall qualities of jackfruit chips. In conclusion, the FD-EPD could be used as a novel combination drying method for processing valuable and/or high quality fruit chips.

Tailoring microstructure and mechanical properties of pectin cryogels by modulate intensity of ionic interconnection.

Porous morphology and mechanical properties determine the applications of cryogels. To understand the influence of the ionic network on the microstructure and mechanical properties of pectin cryogels, we prepared low-methoxyl pectin (LMP) cryogels with different Ca2+ concentrations (measured as R-value, ranging from 0 to 2) through freeze-drying (FD). Results showed that the R-values appeared to be crucial parameters that impact the pore morphology and mechanical characteristics of cryogels. It is achieved by altering the network stability and water state properties of the cryogel precursor. Cryogel precursors with a saturated R-value (R = 1) produced a low pore diameter (0.12 mm) microstructure, obtaining the highest crispness (15.00 ± 1.85) and hardness (maximum positive force and area measuring 2.36 ± 0.31 N and 12.30 ± 1.57 N·s respectively). Hardness showed a negative correlation with Ca2+ concentration when R ≤ 1 (-0.89), and a similar correlation with the porosity of the gel network when R ≥ 1 (-0.80). Given the impacts of crosslinking on the pore structure, it is confirmed that the pore diameter can be designed between 56.24 and 153.58 µm by controlling R-value in the range of 0-2.

Higher molecular weight pectin inhibits ice crystal growth and its effect on the microstructural and physical properties of pectin cryogels.

Understanding the formation of ice crystals is essential for tailoring the microstructure and physical properties of cryogels. This study investigated the effects and mechanisms of pectin molecular weight (Mw) on impacting ice crystal formation. Pectin fractions various Mw (10.13-212.20 kDa) were prepared by hydrothermal method. The solution of high Mw pectin fractions exhibited higher contact angle, lower water freedom, and stronger adsorption of water molecules. The splat experiment and molecular dynamic (MD) results confirmed that higher Mw pectin have stronger ice crystal growth inhibition activity than lower Mw pectin. Furthermore, the pore size distribution of the cryogel increased from 98-203 µm to 105-267 µm as the molecular weight decreased from 212.2 kDa to 121.0 kDa. Additionally, in the higher Mw pectin cryogel, stronger mechanical strength was observed. These findings suggested that changing the molecular weight of pectin has the potential to regulate the ice crystal growth, microstructure and physical properties of frozen products.

Study on the ice crystals growth under pectin gels with different crosslinking strengths by modulating the degree of amidation in HG domain.

The ice crystal morphology formed under a series of amidated pectin gels with various crosslink strengths were investigated. The results showed that as the degree of amidation (DA) increased, pectin chains exhibited shorter homogalacturonan (HG) regions. Highly amidated pectin exhibited a faster gelation rate and a stronger gel micro-network via hydrogen bonds. Based on cryogenic scanning electron microscopy (cryo-SEM), smaller ice crystals were formed in frozen gel with low DA, suggesting that a weaker cross-linked gel micro-network was more effective at inhibiting crystallization. After sublimation, lyophilized gel scaffolds with high crosslink strength displayed less number of pores, high porosity, lower specific surface area, and greater mechanical strength. This study is expected to confirm that the microstructure and mechanical properties of freeze-dried pectin porous materials could be regulated by changing the crosslink strength of pectin chains, which is achieved by increasing the degree of amidation in the HG domains.

Effects of cell morphology on the textural attributes of fruit cubes in freeze-drying: Apples, strawberries, and mangoes as examples.

The influence of cell morphology on the textural characteristic of freeze-dried apple, strawberry, and mango cubes was evaluated. Corresponding restructured cube samples without intact cell morphology were prepared as controls. Results indicated that the presence of cell morphology strengthened the shrinkage and collapse of samples during freeze-drying, especially in mangoes due to the high content of sugar. Intact cell morphology was found in natural fruit cubes after freeze-drying by scanning electron microscopy (SEM) observation, making them exhibit a more regular microporous structure, further resulting in higher hardness than the restructured cubes. However, the intact cell morphology negatively affected the crispness of freeze-dried cubes since it enhanced structural collapse. The freeze-dried samples without cell morphology would destroy the cellulose structure and form a continuous open-pore structure under the concentration effect of ice crystals during freezing, which accelerates the escape of water molecules, increases the drying rate, and avoid collapse. Sensory experiments found that restructured cubes without intact cell morphology exhibited greater comprehensive acceptance, suggesting the potential application of cell morphology disruption in the future freeze-drying industry.

The role of fructose at a range of concentration on the texture and microstructure of freeze-dried pectin-cellulose matrix cryogel.

Freeze-dried (FD) fruit and vegetable materials with a large amount of sugar are unstable. With the aim to understand the structure formation of FD products, the effects of fructose content on the texture and microstructure of FD matrix were investigated by using pectin-cellulose cryogel model. Cryogels containing fructose of 0-40% were produced using freeze-drying at three different primary drying temperatures of -40, -20, and 20°C. The resultant cryogels were characterized by texture profile analyzer, scanning electron microscope, and µCT. Results indicated that at drying temperature of -40°C, increasing fructose concentration promoted the hardness of the cryogels, and cryogels of 16% fructose obtained maximum hardness. Excessive fructose (≥20%) weakened the described hardness, while exhibiting stronger springiness and resilience. The microstructure showed that dense pores and increased wall thickness due to fructose aggregation were critical factors responsible for increased hardness. The porous structure as well as relatively large pore size were necessary for crispness, in addition, rigid pore wall with certain strength were also required. At the drying temperature of 20°C, large hetero-cavities dominated the microstructure of cryogels with 30% and 40% fructose, caused by melting inside during FD process. In this situation, lower Tm (-15.48 and -20.37°C) were responsible for cryogels' melting In conclusion, if possible, regulating fructose content and state may enable the precision texture design of FD fruit and vegetable foods.

New insight into pectic fractions of cell wall: Impact of extraction on pectin structure and in vitro gut fermentation.

Pectic polysaccharides modulate gut fermentation ability, which is determined by structural characteristics. In this work, apple pectins were extracted by HCl (HAEP), NaOH (AEP), cellulase (EAEP), and in parallel cell wall pectic fractions were sequentially extracted by water (WEP), chelator (CEP) and NaOH (NEP). The aim is to comprehensively compare the impact of extraction on pectin structure and gut fermentation behavior. Results showed that high content of galacturonic acid (90.65 mol%) and large molecular weight (675 kg/mol) were detected in the HAEP. Molecular morphology of the HAEP presented high linearity, while AEP, EAEP and WEP exhibited compact filamentous structures with highly branched patterns. The AEP was characterized by high yield (33.1 g/100 g d.b.), moderate molecular weight (304 kg/mol) and large extent of rhamnogalacturonan-I region (24.88 %) with low degree of branching (1.77). After in vitro simulated gut fermentation for 24 h, total content of short-chain fatty acid (SCFA) generated with the AEP supplement increased to 36.8 mmol/L, followed by EAEP, HAEP and WEP (25.2, 24.2 and 20.3 mmol/L, respectively). Meanwhile, WEP simultaneously produced the highest ammonia content (22.4 mmol/L). This investigation suggests that the fermentation of AEP produces more beneficial SCFA and less ammonia, thus indicating a better gut fermentation property.

[Study on the effect of high hydrostatic pressure treatment on the secondary structure of mushroom polyphenoloxidase by SRCD and FTIR].

The secondary structure of the mushroom polyphenoloxidase treated by the high hydrostatic pressure (HHP) was analyzed by the synchrotron radiation circular dichroism (SRCD) and Fourier transform infrared spectroscopy (FTIR). The alpha-helix content of mushroom PPO was decreased after HHP treatment, which indicated that the secondary structure of PPO was changed. There was a discrepancy of the result of the secondary structure content between untreated or HHP-treated mushroom PPO analyzed by SRCD and FTIR spectra, and this discrepancy may be due to the different determination temperature, the concentration of the PPO solution and the spectra analysis method etc. The fluorescence spectra showed that the fluorescence intensity of the mushroom PPO was decreased after HHP treatment, and a red shift was observed after HHP treatment, which indicated that the tertiary structure of the enzyme molecule has been modified.

Influence of starch with different degrees and order of gelatinization on the microstructural and mechanical properties of pectin cryogels: A potential pore morphology regulator.

The applications of cryogels are defined by their porous morphology as well as mechanical properties. To achieve efficient regulation of porous properties for pectin cryogels, we selected starch as a potential polysaccharide regulator. Pectin/starch composite cryogels with different degrees of gelatinization were formulated, and two ways of starch gelatinization were considered: starch gelatinization occurred before or after pectin crosslinking during forming the hydrogel network. The results showed that high gelatinized starch (73.8 %-100.0 %) rendered pectin cryogels with denser pore morphology and higher mechanical strength. The pore diameter transferred from 160-200 µm to 40-60 µm with the degree of gelatinization, while the total porosity decreased by about 15 % and the specific surface area increased by about 100 m2/g. When starch gelatinization occurred before pectin crosslinking, the hydrogen bond interactions between gelatinized starch and pectin were formed to accelerate the gelation rate of the pectin Ca2+-dependent network. When gelatinization occurred after pectin crosslinking, the pre-formed pectin network delayed the breakdown of the starch crystalline structure during gelatinization. The qualitative regulation of the pore morphology in pectin cryogels by incorporating starches with varying degrees of gelatinization was confirmed.

Modulation of ice crystal formation behavior in pectin cryogel by xyloglucan: Effect on microstructural and mechanical properties.

To fully understand the role of xyloglucan (XyG) on the microstructural and mechanical properties of pectin cryogels, we formulated two types of low methoxyl pectin cryogels containing different XyG content (with or without an ionic network) using freeze-drying. The interaction between the pectin and XyG was explored, and the morphologies of ice crystals were characterized by the pore morphometric of freeze-dried scaffolds. Results showed that XyG and pectin could be cross-linked via hydrogen bonding interactions. When the ionic network was present, XyG accelerated pectin gelation but decreased the size of ice crystals during freezing, reducing the pore diameters of cryogels from 340 to 350 µm to 210-230 µm while shifting the structural thickness from 50 to 70 µm to 30-50 µm. When the ionic network was absent, the addition of XyG increased the pore size of the pectin cryogel from 30 to 50 µm to 70-90 µm, while rising the pore wall thickness from 50 to 70 µm to 70-90 µm. The ionic cross-links between the pectin chains gave freeze-dried scaffolds mechanical strength and crispiness, and the incorporation of XyG further strengthened the mechanical resistance of cryogels.

Cell wall polysaccharides and mono-/disaccharides as chemical determinants for the texture and hygroscopicity of freeze-dried fruit and vegetable cubes.

In order to select the critical factors on the texture and hygroscopic characteristics of freeze-dried fruit and vegetable cubes, the correlation analysis was performed on the major chemical compositions of 12 fresh materials, and the microstructure, texture, hygroscopicity of corresponding freeze-dried samples. The dry proportion of starch-rich materials, such as taro, was mainly composed of polysaccharides (0.76-0.89 g/g db), while the dry proportion of starch-poor materials such as apple was mainly composed of mono-/disaccharides (0.70-0.95/g db). Data from the microscopy showed that cell wall polysaccharides constituted the scaffold of freeze-dried cubes and natural starch granules attached to the scaffold as fillers. Both of them inhibited structural collapse. Mono-/disaccharides were accountable for the hardness and crispiness of freeze-dried cubes, however, excessive mono-/disaccharides could reduce the size of the pores and cause severe shrinkage. Polysaccharides reduced the hygroscopicity of freeze-dried cubes, on the contrary, mono-/disaccharides promoted hygroscopicity, especially fructose.

Effects of high hydrostatic pressure on enzymes, phenolic compounds, anthocyanins, polymeric color and color of strawberry pulps.

BACKGROUND: Changes in activity of polyphenol oxidase (PPO), peroxidase (POD) and ß-glucosidase, individual phenolic compounds other than anthocyanins, total phenols, monomeric anthocyanins, polymeric color and instrumental color of strawberry pulps were assessed after high hydrostatic pressure (HHP) (400-600 MPa 5-25 min(-1)) at room temperature. RESULTS: ß-Glucosidase was activated by 4.7-16.6% at 400 MPa 5-25 min(-1) and inactivated by 8.0-41.4% at 500 or 600 MPa. PPO and POD were inactivated at all pressures, the largest reduction in activity being 41.4%, 51.5% and 74.6%, respectively. The individual phenolic compounds and total phenols decreased at 400 MPa, but total phenols increased at 500 or 600 MPa. However, the monomeric anthocyanins, polymeric color and redness (a*) exhibited no change. HHP induced a decrease in lightness (L*) and an increase in yellowness (b*) at 400 MPa, but no significant alteration in L* value and b* value at 500 or 600 MPa was observed; this was attributed to higher residual activity of PPO, POD and ß-glucosidase at 400 MPa. Total color difference (ΔE) was ≥5 at 400 MPa and ≤3 at 500 or 600 MPa. CONCLUSION: HHP effectively retained anthocyanins, phenolic compounds and color of strawberry pulps, and partly inactivated enzymes.

Pectin and homogalacturonan with small molecular mass modulate microbial community and generate high SCFAs via in vitro gut fermentation.

The intestinal fermentability of pectic polysaccharides is largely determined by its molecular size. In this study, fermentation properties of enzymatic-modified apple pectin (AP) and homogalacturonans (HG) with high, medium and low molecular weight (Mw) were evaluated by in vitro fermentation model, and their structural changes were also investigated. Results showed that Mw, monosaccharide contents and molecular linearity of the AP hydrolysates were reduced after microbial degradation. On the other hand, culture media supplemented with low-Mw AP (60,300 g/mol) and low-Mw HG (861 g/mol) exhibited lower pH (5.1 and 5.7, respectively) and produced higher total short-chain fatty acid contents (SCFA, 230.40 mmol/L and 187.19 mmol/L, respectively). However, reduced trends in abundance of the pectinolytic microorganisms Faecalibacterium and Eubacterium were showed as Mw of the HG decreased, whereas growth of the SCFA-producer genera Bifidobaacterium, Megasphaera and Allisonella were improved. This work confirmed that low-Mw pectin and homogalacturonan generated more beneficial metabolites, developing structure-microbiota-gut health relationship.

Systematic Review of Phenolic Compounds in Apple Fruits: Compositions, Distribution, Absorption, Metabolism, and Processing Stability.

As the most widely consumed fruit in the world, apple (Malus domestica Borkh.) fruits provide a high level of phenolics and have many beneficial effects on human health. The composition and content of phenolic compounds in natural apples differs according to the tissue types and cultivar varieties. The bioavailability of apple-derived phenolics, depending on the absorption and metabolism of phenolics during digestion, is the key determinant of their positive biological effects. Meanwhile, various processing technologies affect the composition and content of phenolic compounds in apple products, further affecting the bioavailability of apple phenolics. This review summarizes current understanding on the compositions, distribution, absorption, and metabolism of phenolic compounds in apple and their stability when subjected to common technologies during processing. We intend to provide an updated overview on apple phenolics and also suggest some perspectives for future research of apple phenolics.