Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 25
Filtrar
1.
Opt Lett ; 48(20): 5340-5342, 2023 Oct 15.
Artigo em Inglês | MEDLINE | ID: mdl-37831862

RESUMO

We propose and experimentally demonstrate a new, to the best of our knowledge, underwater monitoring system that incorporates Raman spectroscopy based on a flash lidar. We have visualized underwater oil at a 5 m distance by illuminating the area of around 15 cm diameter with an expanding laser beam at 532 nm and detecting the oil and water Raman images. By calibrating the oil Raman image with the water Raman image, the detection limit of liquid oil thickness has been estimated to be about 0.27 mm. Thus, the proposed technique provides the capability of effectively detecting oil leaks in underwater sea areas.

2.
Br J Surg ; 106(5): 616-625, 2019 04.
Artigo em Inglês | MEDLINE | ID: mdl-30725479

RESUMO

BACKGROUND: Visceral obesity is one of the risk factors for clinically relevant pancreatic fistula after pancreatic resection. The objective of this study was to evaluate the impact of intraperitoneal lipolysis on postoperative pancreatic fistula. METHODS: The degree of intraperitoneal lipolysis was investigated by measuring the free fatty acid concentration in drain discharge in patients after pancreatic resection. An experimental pancreatic fistula model was prepared by pancreatic transection, and the impact of intraperitoneal lipolysis was evaluated by intraperitoneal administration of triolein (triglyceride) with, or without orlistat (lipase inhibitor). RESULTS: Thirty-three patients were included in the analysis. The free fatty acid concentration in drain discharge on postoperative day 1 was significantly associated with the development of a clinically relevant pancreatic fistula (P = 0·004). A higher free fatty acid concentration in drain discharge was associated with more visceral adipose tissue (P = 0·009). In the experimental model that included 98 rats, intraperitoneal lipolysis caused an increased amount of pancreatic juice leakage and multiple organ dysfunction. Intraperitoneal administration of a lipase inhibitor reduced lipolysis and prevented deterioration of the fistula. CONCLUSION: Intraperitoneal lipolysis significantly exacerbates pancreatic fistula after pancreatic resection. Inhibition of lipolysis by intraperitoneal administration of a lipase inhibitor could be a promising therapy to reduce clinically relevant postoperative pancreatic fistula. Surgical relevance Clinically, there are two types of pancreatic fistula after pancreatic resections: harmless biochemical leak and harmful clinically relevant pancreatic fistula. Visceral obesity is one of the known risk factors for clinically relevant pancreatic fistula; however, the underlying mechanisms remained to be elucidated. Patients with clinically relevant pancreatic fistula had a higher free fatty acid concentration in the drain discharge, suggesting a relationship between intraperitoneal lipolysis and pancreatic fistula. The experimental model of pancreatic fistula demonstrated that intraperitoneal lipolysis caused deterioration in pancreatic fistula, suggesting that intraperitoneal lipolysis is one of the mechanisms that drives biochemical leakage to clinically relevant pancreatic fistula. Intraperitoneal administration of a lipase inhibitor prevented lipolysis as well as pancreatic fistula deterioration in the experimental model, suggesting a future clinical application for lipase inhibitors in prevention of clinically relevant pancreatic fistula.


Assuntos
Gordura Intra-Abdominal/fisiopatologia , Lipólise/fisiologia , Pancreatectomia/efeitos adversos , Fístula Pancreática/etiologia , Pancreaticoduodenectomia/efeitos adversos , Idoso , Animais , Modelos Animais de Doenças , Ácidos Graxos não Esterificados/análise , Feminino , Humanos , Lipase/antagonistas & inibidores , Lipólise/efeitos dos fármacos , Masculino , Pessoa de Meia-Idade , Obesidade Abdominal/complicações , Obesidade Abdominal/fisiopatologia , Fístula Pancreática/prevenção & controle , Suco Pancreático/fisiologia , Complicações Pós-Operatórias/fisiopatologia , Ratos Sprague-Dawley , Fatores de Risco
3.
Opt Express ; 22(2): 2060-9, 2014 Jan 27.
Artigo em Inglês | MEDLINE | ID: mdl-24515215

RESUMO

We demonstrate the performance of an efficient insertable pulse cleaning module (IPCM) that uses a saturable absorber (SA) pair with a compensating multi-pass amplifier. IPCM consists of a first SA, a grating compressor, a second SA, a stretcher and a compensating Ti:sapphire amplifier. It is implemented with a conventional chirped pulse amplification (CPA) Ti:sapphire laser system, resulting in a double CPA system architecture, and suppresses the amplified spontaneous emission (ASE) level of the pulse pedestal by about three orders of magnitude while preserving the output pulse energy and repetition-rate of the overall laser system. The duration of recompressed cleaned pulses is comparable to that obtained without the cleaning module. The effectiveness of the cleaning module is confirmed in laser-driven proton acceleration experiments. At the 10(9) W/cm2 pedestal level, the surface structure and electrical resistivity of an insulator target (100 nm silicon nitride) are preserved prior to the arrival of the intense ultrashort pulse.

4.
Rev Sci Instrum ; 95(3)2024 Mar 01.
Artigo em Inglês | MEDLINE | ID: mdl-38436451

RESUMO

Solid-state nuclear track detectors (SSNTDs) are often used as ion detectors in laser-driven ion acceleration experiments and are considered to be the most reliable ion diagnostics since they are sensitive only to ions and measure ions one by one. However, ion pit analyses require tremendous time and effort in chemical etching, microscope scanning, and ion pit identification by eyes. From a laser-driven ion acceleration experiment, there are typically millions of microscopic images, and it is practically impossible to analyze all of them by hand. This research aims to improve the efficiency and automation of SSNTD analyses for laser-driven ion acceleration. We use two sets of data obtained from calibration experiments with a conventional accelerator where ions with known nuclides and energies are generated and from actual laser experiments using SSNTDs. After chemical etching and scanning the SSNTDs with an optical microscope, we use machine learning to distinguish the ion etch pits from noises. From the results of the calibration experiment, we confirm highly accurate etch-pit detection with machine learning. We are also able to detect etch pits with machine learning from the laser-driven ion acceleration experiment, which is much noisier than calibration experiments. By using machine learning, we successfully identify ion etch pits ∼105 from more than 10 000 microscopic images with a precision of ≳95%. A million microscopic images can be examined with a recent entry-level computer within a day with high precision. Machine learning tremendously reduces the time consumption on ion etch pit analyses detected on SSNTDs.

5.
Opt Express ; 21(18): 20656-74, 2013 Sep 09.
Artigo em Inglês | MEDLINE | ID: mdl-24103939

RESUMO

A detailed mathematical model is presented for a submicron-sized cluster formation in a binary gas mixture flowing through a three-staged conical nozzle. By measuring the angular distribution of light scattered from the clusters, the size of CO(2) clusters, produced in a supersonic expansion of the mixture gas of CO(2)(30%)/H(2)(70%) or CO(2)(10%)/He(90%), has been evaluated using the Mie scattering method. The mean sizes of CO(2) clusters are estimated to be 0.28 ± 0.03 µm for CO(2)/H(2) and 0.26 ± 0.04 µm for CO(2)/He, respectively. In addition, total gas density profiles in radial direction of the gas jet, measuring the phase shift of the light passing through the target by utilizing an interferometer, are found to be agreed with the numerical modeling within a factor of two. The dryness (= monomer/(monomer + cluster) ratio) in the targets is found to support the numerical modeling. The apparatus developed to evaluate the cluster-gas targets proved that our mathematical model of cluster formation is reliable enough for the binary gas mixture.

6.
Rev Sci Instrum ; 93(9): 093523, 2022 Sep 01.
Artigo em Inglês | MEDLINE | ID: mdl-36182514

RESUMO

Bright, short-pulsed neutron beams from laser-driven neutron sources (LANSs) provide a new perspective on material screening via fast neutron activation analysis (FNAA). FNAA is a nondestructive technique for determining material elemental composition based on nuclear excitation by fast neutron bombardment and subsequent spectral analysis of prompt γ-rays emitted by the active nuclei. Our recent experiments and simulations have shown that activation analysis can be used in practice with modest neutron fluences on the order of 105 n/cm2, which is available with current laser technology. In addition, time-resolved γ-ray measurements combined with picosecond neutron probes from LANSs are effective in mitigating the issue of spectral interference between elements, enabling highly accurate screening of complex samples containing many elements. This paper describes the predictive capability of LANS-based activation analysis based on experimental demonstrations and spectral calculations with Monte Carlo simulations.

7.
Rev Sci Instrum ; 93(6): 063505, 2022 Jun 01.
Artigo em Inglês | MEDLINE | ID: mdl-35778032

RESUMO

The shock ignition (SI) approach to inertial confinement fusion is a promising scheme for achieving energy production by nuclear fusion. SI relies on using a high intensity laser pulse (≈1016 W/cm2, with a duration of several hundred ps) at the end of the fuel compression stage. However, during laser-plasma interaction (LPI), several parametric instabilities, such as stimulated Raman scattering and two plasmon decay, nonlinearly generate hot electrons (HEs). The whole behavior of HE under SI conditions, including their generation, transport, and final absorption, is still unclear and needs further experimental investigation. This paper focuses on the development of an experimental platform for SI-related experiments, which simultaneously makes use of multiple diagnostics to characterize LPI and HE generation, transport, and energy deposition. Such diagnostics include optical spectrometers, streaked optical shadowgraph, an x-ray pinhole camera, a two-dimensional x-ray imager, a Cu Kα line spectrometer, two hot-electron spectrometers, a hard x-ray (bremsstrahlung) detector, and a streaked optical pyrometer. Diagnostics successfully operated simultaneously in single-shot mode, revealing the features of HEs under SI-relevant conditions.

8.
Sci Rep ; 12(1): 6876, 2022 Apr 27.
Artigo em Inglês | MEDLINE | ID: mdl-35477961

RESUMO

High energy density physics is the field of physics dedicated to the study of matter and plasmas in extreme conditions of temperature, densities and pressures. It encompasses multiple disciplines such as material science, planetary science, laboratory and astrophysical plasma science. For the latter, high energy density states can be accompanied by extreme radiation environments and super-strong magnetic fields. The creation of high energy density states in the laboratory consists in concentrating/depositing large amounts of energy in a reduced mass, typically solid material sample or dense plasma, over a time shorter than the typical timescales of heat conduction and hydrodynamic expansion. Laser-generated, high current-density ion beams constitute an important tool for the creation of high energy density states in the laboratory. Focusing plasma devices, such as cone-targets are necessary in order to focus and direct these intense beams towards the heating sample or dense plasma, while protecting the proton generation foil from the harsh environments typical of an integrated high-power laser experiment. A full understanding of the ion beam dynamics in focusing devices is therefore necessary in order to properly design and interpret the numerous experiments in the field. In this work, we report a detailed investigation of large-scale, kilojoule-class laser-generated ion beam dynamics in focusing devices and we demonstrate that high-brilliance ion beams compress magnetic fields to amplitudes exceeding tens of kilo-Tesla, which in turn play a dominant role in the focusing process, resulting either in a worsening or enhancement of focusing capabilities depending on the target geometry.

9.
Opt Express ; 19(5): 4560-5, 2011 Feb 28.
Artigo em Inglês | MEDLINE | ID: mdl-21369288

RESUMO

Kα line emissions from Mo and Ag plates were experimentally studied using clean, ultrahigh-intensity femtosecond laser pulses. The absolute yields of Kα x-rays at 17 keV from Mo and 22 keV from Ag were measured as a function of the laser pulse contrast ratio and irradiation intensity. Significantly enhanced Kα yields were obtained for both Mo and Ag by employing high contrast ratios and irradiances. Conversion efficiencies of 4.28×10⁻5/sr for Mo and 4.84×10⁻5/sr for Ag, the highest values obtained to date, were demonstrated with contrast ratios in the range 10⁻¹° to 10⁻¹¹.


Assuntos
Lasers , Raios X , Desenho de Equipamento , Análise de Falha de Equipamento , Doses de Radiação
10.
Rev Sci Instrum ; 92(6): 063301, 2021 Jun 01.
Artigo em Inglês | MEDLINE | ID: mdl-34243550

RESUMO

A dosimetric calibration of three types of radiochromic films (GafChromicTM HD-V2, MD-V3, and EBT3) was carried out for absorbed doses (D) ranging up to 100 kGy using a 130 TBq Co60 γ-ray source. The optical densities (ODs) of the irradiated films were acquired with the transmission-mode flatbed film scanner EPSON GT-X980. The calibration data were cross-checked using the 20-MeV proton beam from the azimuthally varying field cyclotron at the Research Center for Nuclear Physics in Osaka University. These experimental results not only present the measurable dose ranges of the films depending on the readout wavelength, but also show consistency with our hypothesis that the OD response curve [log(OD)-log(D) curve] is determined by the volumetric average of the absorption dose and does not strongly depend on the type of radiation for the excitation.

11.
Sci Rep ; 10(1): 20157, 2020 Nov 19.
Artigo em Inglês | MEDLINE | ID: mdl-33214592

RESUMO

The scientific and technical advances continue to support novel discoveries by allowing scientists to acquire new insights into the structure and properties of matter using new tools and sources. Notably, neutrons are among the most valuable sources in providing such a capability. At the Institute of Laser Engineering, Osaka, the first steps are taken towards the development of a table-top laser-driven neutron source, capable of producing a wide range of energies with high brightness and temporal resolution. By employing a pure hydrogen moderator, maintained at cryogenic temperature, a cold neutron ([Formula: see text]) flux of [Formula: see text]/pulse was measured at the proximity of the moderator exit surface. The beam duration of hundreds of ns to tens of [Formula: see text] is evaluated for neutron energies ranging from 100s keV down to meV via Monte-Carlo techniques. Presently, with the upcoming J-EPoCH high repetition rate laser at Osaka University, a cold neutron flux in orders of [Formula: see text] is expected to be delivered at the moderator in a compact beamline.

12.
Phys Rev E ; 102(3-1): 033202, 2020 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-33075864

RESUMO

Magnetic reconnection in a relativistic electron magnetization regime was observed in a laboratory plasma produced by a high-intensity, large energy, picoseconds laser pulse. Magnetic reconnection conditions realized with a laser-driven several kilotesla magnetic field is comparable to that in the accretion disk corona of black hole systems, i.e., Cygnus X-1. We observed particle energy distributions of reconnection outflow jets, which possess a power-law component in a high-energy range. The hardness of the observed spectra could explain the hard-state x-ray emission from accreting black hole systems.

13.
Phys Rev Lett ; 103(16): 165002, 2009 Oct 16.
Artigo em Inglês | MEDLINE | ID: mdl-19905702

RESUMO

An approach for accelerating ions, with the use of a cluster-gas target and an ultrashort pulse laser of 150-mJ energy and 40-fs duration, is presented. Ions with energy 10-20 MeV per nucleon having a small divergence (full angle) of 3.4 degrees are generated in the forward direction, corresponding to approximately tenfold increase in the ion energies compared to previous experiments using solid targets. It is inferred from a particle-in-cell simulation that the high energy ions are generated at the rear side of the target due to the formation of a strong dipole vortex structure in subcritical density plasmas.

14.
Sci Rep ; 9(1): 19462, 2019 Dec 19.
Artigo em Inglês | MEDLINE | ID: mdl-31857664

RESUMO

We present the results of theoretical studies of formation and evolution of the current sheet in a colliosionless plasma during magnetic reconnection in relativistic limit. Relativistic magnetic reconnection is driven by parallel laser pulses interacting with underdense plasma target. Annihilation of laser created magnetic field of opposite polarity generates strong non-stationary electric field formed in between the region with opposite polarity magnetic field accelerating charged particles within the current sheet. This laser-plasma target configuration is discussed in regard with the laboratory modeling of charged particle acceleration and gamma flash generation in astrophysics. We present the results of 3-dimensional kinetic simulations and theoretical studies on the formation and evolution of the current sheet in a collisionless plasma during magnetic field annihilation in the ultra-relativistic limit. Annihilation of oppositively directed magnetic fields driven by two laser pulses interacting with underdense plasma target is accompanied by an electromagnetic burst generation. The induced strong non-stationary longitudinal electric field accelerates charged particles within the current sheet. Properties of the laser-plasma target configuration are discussed in the context of the laboratory modeling for charged particle acceleration and gamma flash generation in astrophysics.

15.
Nat Commun ; 10(1): 2995, 2019 Jul 05.
Artigo em Inglês | MEDLINE | ID: mdl-31278266

RESUMO

Increasing the laser energy absorption into energetic particle beams represents a longstanding quest in intense laser-plasma physics. During the interaction with matter, part of the laser energy is converted into relativistic electron beams, which are the origin of secondary sources of energetic ions, γ-rays and neutrons. Here we experimentally demonstrate that using multiple coherent laser beamlets spatially and temporally overlapped, thus producing an interference pattern in the laser focus, significantly improves the laser energy conversion efficiency into hot electrons, compared to one beam with the same energy and nominal intensity as the four beamlets combined. Two-dimensional particle-in-cell simulations support the experimental results, suggesting that beamlet interference pattern induces a periodical shaping of the critical density, ultimately playing a key-role in enhancing the laser-to-electron energy conversion efficiency. This method is rather insensitive to laser pulse contrast and duration, making this approach robust and suitable to many existing facilities.

16.
Phys Rev E Stat Nonlin Soft Matter Phys ; 77(1 Pt 2): 016401, 2008 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-18351938

RESUMO

Duration-controlled amplified spontaneous emission with an intensity of 10(13) W/cm(2) is used to convert a 7.5-microm -thick polyimide foil into a near-critical plasma, in which the p -polarized, 45-fs , 10(19) -Wcm (2) laser pulse generates 3.8-MeV protons, emitted at some angle between the target normal and the laser propagation direction of 45 degrees . Particle-in-cell simulations reveal that the efficient proton acceleration is due to the generation of a quasistatic magnetic field on the target rear side with magnetic pressure inducing and sustaining a charge separation electrostatic field.

17.
Rev Sci Instrum ; 89(10): 10I114, 2018 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-30399813

RESUMO

A design of multichannel gated photomultiplier tube (PMT) is presented for the 960-channel neutron time-of-flight detector at the Institute of Laser Engineering of Osaka University. This is important for the fusion science and the nuclear photonics where intense hard X-rays are generated from the interaction of ultra-short laser pulse of petawatt power density with matter. The hard X-rays often overload PMTs and cause signal-induced background noises called afterpulses, making the detection of subsequent neutrons impossible. For this reason, the PMTs are coupled with an electrical time-gating (ETG) system to avoid overloading. The ETG system disables the PMT by modulating the dynode potential during the primary X-ray flash. An after-pulsing suppression technique is demonstrated by applying a reverse bias voltage between the photocathode and the first dynode. The presented multichannel scheme provides a gate response time of 80 ns, a signal cutoff ratio of 2.5 × 102, and requires reasonably low power consumption.

18.
Rev Sci Instrum ; 89(10): 10I128, 2018 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-30399964

RESUMO

A large-aperture high-sensitivity image intensifier panel that consists of an avalanche photodiode array and a light-emitting diode array is presented. The device has 40% quantum efficiency, over 104 optical gain, and 80-ns time resolution. The aperture size of the device is 20 cm, and with the current manufacturing process, it can be scaled to arbitrarily larger sizes. The device can intensify the light from a single particle scintillation emission to an eye-visible bright flash. The image resolution of the device is currently limited by the size of the avalanche photodiode that is 2 mm, although it can be scaled to smaller sizes in the near future. The image intensifier is operated at a small voltage, typically +57 V. The device can be applied to various applications, such as scintillation imaging, night vision cameras, and an image converter from non-visible light (such as infrared or ultraviolet) to visible light.

19.
Sci Rep ; 7: 42451, 2017 02 13.
Artigo em Inglês | MEDLINE | ID: mdl-28211913

RESUMO

Using one of the world most powerful laser facility, we demonstrate for the first time that high-contrast multi-picosecond pulses are advantageous for proton acceleration. By extending the pulse duration from 1.5 to 6 ps with fixed laser intensity of 1018 W cm-2, the maximum proton energy is improved more than twice (from 13 to 33 MeV). At the same time, laser-energy conversion efficiency into the MeV protons is enhanced with an order of magnitude, achieving 5% for protons above 6 MeV with the 6 ps pulse duration. The proton energies observed are discussed using a plasma expansion model newly developed that takes the electron temperature evolution beyond the ponderomotive energy in the over picoseconds interaction into account. The present results are quite encouraging for realizing ion-driven fast ignition and novel ion beamlines.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA