Is a Novel Fluoroscopic Intraoperative Reference System Superior to Conventional Management for Distal Radius Fracture Reduction? A Propensity-matched Comparative Study.

BACKGROUND: Preoperative planning is generally performed to simulate the process of reduction as well as to determine the size and placement of implants in patients undergoing distal radius fracture surgery. We previously described a three-dimensional (3D) digital preoperative planning system for the osteosynthesis of distal radius fractures, and we have developed a novel intraoperative referencing system that superimposes preoperative planning (such as plate position and length) onto fluoroscopic images during surgery; however, its efficacy has not been evaluated compared with conventional planning and surgery. QUESTIONS/PURPOSES: Does use of a novel intraoperative referencing system result in (1) better Mayo wrist scores at 3 and 6 months after surgery and (2) less loss of reduction in terms of ulnar variance, palmar tilt, and radial inclination on plain radiographs taken 1 week, 3 months, and 6 months after surgery compared with conventional preoperative planning? METHODS: Between April 2014 and October 2021, we treated 294 patients with open reduction and volar plate fixation for distal radius fractures. Of 294 patients, 65% (191) underwent surgery using either conventional preoperative planning or a novel intraoperative referencing system. The remaining patients were excluded because they were younger than 18 years, they had some missing medical records related to the clinical outcomes, or they had a previous history of upper extremity injuries. During that time, we generally treated fractures with volar plates when there was: more than 2 mm of stepoff/gap in the articular surface, a dorsal tilt more than 15°, radial inclination less than 15°, or radial shortening more than 5 mm. Generally, we used a flexor carpi radialis approach. In some patients who had dorsal fragments, we added a dorsal approach. At that time, we were developing the new intraoperative referencing system, so it was not used consistently. To arrive at a fair assessment, we opted to perform propensity matching based on age, gender, and AO fracture type. During the period in question, 36% (69 of 191) of patients with distal radius fractures who received a volar plate were treated using our novel intraoperative referencing system, and 64% (122 of 191) had surgery using conventional preoperative planning (control group). Of those, 91% (63 of 69) of patients who were treated with the intraoperative referencing system and 89% (108 of 122) of those in the control group were available for follow-up with all imaging and Mayo wrist scores at least 6 months after surgery. After propensity matching, that left us with two groups of 39 patients, who were well matched in terms of age and fracture type; these were the study groups. We also tried to match them according to gender, but there were fewer patients in the intraoperative referencing group, and the percentage of women for each group differed: 70% (44 of 63) in the intraoperative referencing group and 76% (82 of 108) in the control group. Also, there were fewer men with C3 fractures in the control group. Therefore, 64% (25 of 39) of patients in the intraoperative referencing group were women and 77% (30 of 39) of patients in the control group were women. In the intraoperative referencing group, our novel intraoperative referencing system was used in combination with the 3D digital preoperative planning system for preoperative planning. In the control group, preoperative planning was performed manually in a conventional manner using tracing paper and implant templates or using a digital template. We compared the groups in terms of operative duration, the radiation dose used in surgery, and Mayo wrist scores at 3 and 6 months after surgery. We also compared the groups in terms of loss of reduction on ulnar variance, palmar tilt, and radial inclination on plain radiographs taken 3 months and 6 months after surgery. We considered the plain radiograph taken 1 week after surgery as a baseline. Each item was compared between the image fusion and control groups using a Welch t - test. RESULTS: Mayo wrist scores were no different between the intraoperative referencing system and the control group at 3 months (71 ± 7 versus 72 ± 11, mean difference 1 [95% CI -3.7 to 5.7]; p = 0.07) or at 6 months after surgery (76 ± 6 versus 79 ± 11, mean difference 3 [95% CI -3.5 to 7.9]; p = 0.12). There were no differences in surgical duration or radiation doses between the intraoperative referencing and control groups. We found only a small advantage in favor of the intraoperative referencing system in terms of loss of reduction on ulnar variance (3 months after surgery: 0.2 ± 0.4 mm versus 0.6 ± 0.7 mm, mean difference 0.4 mm [95% CI 0.15 to 0.69]; p = 0.003, 6 months after surgery: 0.4 ± 0.6 mm versus 0.8 ± 0.8 mm, mean difference 0.4 mm [95% CI 0.05 to 0.73]; p = 0.02 for the intraoperative referencing system and the control group, respectively). This difference in radial shortening was so small that it was not likely to have been clinically important. CONCLUSION: We found no clinically important advantages from the use of our novel intraoperative referencing system except a slight improvement in ulnar variance. Therefore, we recommend against its use in everyday practice at this time. However, future improvements may lead to better clinical outcomes, so we plan further investigations. LEVEL OF EVIDENCE: Level III, therapeutic study.

Magnetic resonance imaging predicts outcomes of conservative treatment in patients with lateral epicondylitis.

BACKGROUND: The clinical validity of positive magnetic resonance imaging findings in lateral epicondylitis is controversial. We hypothesized that magnetic resonance imaging could predict the outcome of conservative treatment. This study determined the relationship between magnetic resonance imaging-defined disease severity and treatment outcomes in patients with lateral epicondylitis. METHODS: This retrospective single-cohort study included 43 conservatively managed and 50 surgically treated patients with lateral epicondylitis. The magnetic resonance imaging scores and clinical outcomes were examined six months post-treatment, and the former was compared between patients with good and poor treatment outcomes. We developed operating characteristic curves of magnetic resonance imaging scores for treatment outcomes, and divided patients into magnetic resonance imaging-mild and severe groups according to the obtained cut-off value of the scores. We compared the outcomes of conservative treatment with that of surgery for each magnetic resonance imaging severity. RESULTS: Twenty-nine (67.4%) conservatively treated patients had good outcomes, while 14 (32.6%) had poor outcomes. The magnetic resonance imaging score was higher in patients with poor outcomes; the cut-off value was 6. Forty-three (86.0%) surgically treated patients had good outcomes, while 7 (14.0%) had poor outcomes. There was no significant difference in magnetic resonance imaging scores between patients with good and poor surgical outcomes. In the magnetic resonance imaging-mild group (score ≤ 5), the outcome showed no significant difference between the conservative and surgical treatment groups. In the magnetic resonance imaging-severe group (score≥6), the outcome of conservative treatment was significantly worse than that of surgical treatment. CONCLUSIONS: The magnetic resonance imaging score was associated with conservative treatment outcomes. A treatment strategy that includes surgery should be considered for patients with severe magnetic resonance imaging findings; this is not recommended for those with mild magnetic resonance imaging findings. Magnetic resonance imaging is helpful in determining the best treatment strategies for patients with lateral epicondylitis. LEVEL OF EVIDENCE: III, Retrospective cohort study.

An image fusion system for corrective osteotomy of distal radius malunion.

BACKGROUND: To provide surgical support for corrective osteotomy, we developed an image fusion system for three-dimensional (3D) preoperative planning and fluoroscopy. To assess the utility of this image fusion system, we evaluated the reproducibility of preoperative planning for corrective osteotomy of dorsally angulated distal radius malunion using the system and compared reproducibility without using the system. METHODS: Ten wrists from 10 distal radius malunion patients who underwent corrective osteotomy were evaluated. 3D preoperative planning and the image fusion system were used for the image fusion group (n = 5). Only 3D preoperative planning was used for the control group (n = 5). 3D preoperative planning was performed for both groups in order to assess reduction, placement, and the choice of implants. In the image fusion group, the outline of the planned image was displayed on a monitor and overlapped with fluoroscopy images during surgery. Reproducibility was evaluated using preoperative plan and postoperative 3D images. Images were compared with the 3D coordinates of the radial styloid process (1), the volar and dorsal edges of the sigmoid notch (2) (3), and the barycentric coordinates of the three reference points. The reproducibility of the preoperative plan was evaluated by the distance of the coordinates between the plan and postoperative images for the reference points. RESULTS: The distances between preoperative planning and postoperative reduction in the image fusion group were 2.1 ± 1.1 mm, 1.8 ± 0.7 mm, 1.9 ± 0.9 mm, and 1.4 ± 0.7 mm for reference points (1), (2), (3), and the barycenter, respectively. The distances between preoperative planning and postoperative reduction in the control group were 3.7 ± 1.0 mm, 2.8 ± 2.0 mm, 1.7 ± 0.8 mm, and 1.8 ± 1.2 mm for reference points (1), (2), (3), and the barycenter, respectively. The difference in reference point (1) was significantly smaller in the image fusion group than in the control group (P < 0.05). CONCLUSION: Corrective osteotomy using an image fusion system will become a new surgical support method for fracture malunion. Trial registration Registered as NCT03764501 at ClinicalTrials.gov.

Development of three-dimensional preoperative planning system for the osteosynthesis of distal humerus fractures.

BACKGROUND: To reproduce anatomical reduction and appropriate implant placement/choices during osteosynthesis for elbow fractures, we developed a 3D preoperative planning system. To assess the utility of 3D digital preoperative planning for the osteosynthesis of distal humerus fractures, we evaluated the reproducibility of implant reduction shapes and placements in patients with distal humerus fractures. METHODS: Twelve patients with distal humerus fractures who underwent osteosynthesis using 3D preoperative planning were evaluated. Reduction shapes were evaluated by the angle between the diaphysis axis and a line connecting the vertices of the medial epicondyle and the lateral epicondyle (epicondyle angle), and the angle between the diaphysis axis and the articular surface (joint angle) in the coronal plane, and the distance between the anterior diaphysis and the anterior articular surface in the sagittal plane (anterior distance) based on 3D images of the distal humerus. In addition, the implant positions were evaluated by the positions of the proximal and posterior edge of the plate, and the angle of the plate to the epicondyle line. The reproducibility was evaluated by intra-class correlation coefficients of the parameters between pre- and postoperative images. RESULTS: The intra-class correlation coefficients were 0.545, 0.802, and 0.372 for the epicondyle angle, joint angle, and anterior distance, respectively. The differences in the measurements between the preoperative plan and postoperative reduction were 2.1 ± 2.1 degrees, 2.3 ± 1.8 degrees, and 2.8 ± 2.0 mm, for the epicondyle angle, joint angle, and anterior distance, respectively. The intra-class correlation coefficients were 0.983, 0.661, and 0.653 for the proximal and posterior plate positions, and the angle to the epicondyle, respectively. The differences in the measurements between the preoperative plan and postoperative reduction were 3.3 ± 2.1 mm, 2.7 ± 1.7 mm and 9.7 ± 9.8 degrees, for the plate positions of proximal and posterior edge, and the angle of the plate to the epicondyle line, respectively. There were significant correlations for the epicondyle angle, joint angle, and plate positions. CONCLUSIONS: 3D preoperative planning for osteosynthesis of distal humerus fracture was reproducible for the reduction shape of the coronal view and the plate positions. It may be helpful for acquiring practical images of osteosynthesis in distal humerus fractures. LEVEL OF EVIDENCE: Level III, a case-control study.

Radiographic characteristics of wrists in idiopathic carpal tunnel syndrome patients.

BACKGROUND: To determine the radiographic characteristics of wrists in idiopathic carpal tunnel syndrome patients, we compared the radiographic parameters of the wrists between carpal tunnel syndrome patients and non-symptomatic controls. METHODS: We evaluated radiographic parameters of 94 wrists of 62 idiopathic carpal tunnel syndrome patients and 94 asymptomatic wrists of 94 controls. Carpal tunnel syndrome was diagnosed by clinical findings and nerve conduction studies. The lack of symptoms was confirmed with the medical records and interviews for the controls. X-ray images of the postero-anterior and lateral views of the wrist were taken. Using the obtained X-ray images, the indices of radial inclination, volar tilt, ulnar variance, and transverse and antero-posterior diameters of the wrists were measured. Two raters independently performed the measurement. One rater measured without information of clinical symptoms. Inter-rater reliabilities for each parameter were evaluated by the intra-class correlation coefficients. The averages of the measurements of two raters were compared between the carpal tunnel syndrome patients and the controls. RESULTS: The intra-class correlation coefficients were 0.58 for radial inclination, 0.77 for ulnar variance, 0.99 for transverse diameter, 0.60 for volar tilt, and 0.91 for antero-posterior diameter. Statistically significant correlations were found for all parameters (P < 0.01). The ulnar variance was significantly larger in the carpal tunnel syndrome patients compared to the controls (1.7 +/- 1.8 mm and 0.8 +/- 1.5 mm for the patients and controls, respectively P < 0.01). There were no significant differences in the other parameters. CONCLUSIONS: Significant differences in the ulnar variance were observed between carpal tunnel syndrome patients and controls. This suggests that the imbalance of radioulnar bone length is one of the risk factors to develop carpal tunnel syndrome. The positive ulnar variance may be an index that needs attention to the development of carpal tunnel syndrome. LEVEL OF EVIDENCE: level III, a case control study.

Postoperative diagnostic potentials of median nerve strain and applied pressure measurement after carpal tunnel release.

BAKGROUND: The objective of this study is to investigate the prognostic values of median nerve strain and applied pressure measurement for the assessment of clinical recovery after carpal tunnel release. METHODS: Forty-five wrists, from 45 idiopathic carpal tunnel syndrome patients who treated with open carpal tunnel release, were evaluated by ultrasound. Median nerve strain, pressure applied to the skin, and ratio of pressure-strain were measured at the proximal part of the carpal tunnel. In addition, distal latencies in the motor and sensory nerve conductions studies and cross-sectional area of median nerve were measured. The parameters were compared before and after the open carpal tunnel release. According to patient recovery, the receiver operating characteristic curves were generated to evaluate the prognostic values of the parameters. The areas under the receiver operating characteristic curves were compared among parameters. RESULTS: There was a significant increase in the median nerve strain, and significant decreases in the pressure applied to the skin and ratio of pressure-strain after carpal tunnel release (P < 0.01). There were significant decreases in the distal latencies and the cross-sectional area after carpal tunnel release (P < 0.01). The areas under the curves were 0.689, 0.773, 0.811, 0.668, 0.637, and 0.562 for the pressure, strain, pressure-strain ratio, motor latency, sensory latency, and area, respectively. CONCLUSIONS: The results suggest that elasticity of the median nerve and pressure around the nerve recover quickly after carpal tunnel release. Pressure-strain ratio was the most reliable parameter to reflect clinical recovery. The measurement of strain and applied pressure can be useful indicators to evaluate effectiveness of the carpal tunnel release. TRIAL REGISTRATION: Registered as NCT04027998 at ClinicalTrials.gov. Retrospectively registered on July 22, 2019.

Strain and Morphological Changes of Median Nerve After Carpal Tunnel Release.

OBJECTIVES: Characterization of the changes of ultrasound parameters after carpal tunnel release may be useful for clarifying the effectiveness or the recovery process of the carpal tunnel syndrome treatment. We evaluated strain and morphological changes of the median nerve before and after carpal tunnel release in carpal tunnel syndrome patients. METHODS: Twenty-two wrists of 20 idiopathic carpal tunnel syndrome patients who underwent open carpal tunnel release were evaluated by ultrasound. Cross-sectional images of the median nerve were obtained at the proximal carpal tunnel. The cross-sectional area, perimeter, aspect ratio of the minimum enclosing rectangle, and strain of the median nerve were measured and compared before and after carpal tunnel release. According to the patient's recovery, the areas under the receiver operating characteristic curves (AUCs) were compared among the parameters. RESULTS: After carpal tunnel release, the area and perimeter significantly decreased, and the strain significantly increased compared with before carpal tunnel release. There were no significant changes in the aspect ratio after carpal tunnel release. The AUCs were 0.663, 0.643, 0.543, and 0.731 for the area, perimeter, aspect ratio, and strain, respectively. CONCLUSIONS: Significant decreases in median nerve area and perimeter as well as significant increases in median nerve strain were observed after carpal tunnel release. The results of this study may be useful when considering how the median nerve recovers after carpal tunnel release.

Measurement of wrist flexion and extension torques in different forearm positions.

BACKGROUND: Forceful activities of the wrist were considered to be a risk factor for the epicondylitis. However, there are still conflicting evidence concerning work-relatedness of epicondylitis. The main problem is that there is little information about which forearm postures are capable of withstanding higher torque loads and the extent of the differences in the torques generated by different forearm postures. The objective of this study was to investigate the differences in wrist flexion and extension torques among different forearm positions in healthy subjects. METHODS: Twenty wrists of 10 asymptomatic volunteers were evaluated. The apparatus to measure the wrist torque consisted of a handle with a force sensor and a table to place the forearm in different positions. The direction of the handle can change when measuring different forearm positions. The forearm of the examinee was secured to the table. The participants were asked to exert themselves in maximal isometric contraction for wrist flexion or extension, and to maintain it for 5 s. Each evaluation of the flexion and extension torque was conducted twice. Three forearm positions were evaluated: neutral, pronation, and supination. The intra-class correlation coefficients between first and second measurements were evaluated for the maximum torque. The maximum torques and flexion/extension ratio were compared among the positions. In addition, the agility and endurance for the wrist extension/flexion torques were compared among the positions. RESULTS: The intra-class correlation coefficients between first and second measurements were 0.928 and 0.866 for the wrist flexion and extension measurements, respectively. The highest torques for the wrist flexion and extension were observed in the supination and pronation positions, respectively (P < 0.01). There was a higher extension/flexion ratio in the supination position compared to the other positions (P < 0.05). There was a superior agility for the wrist flexion in the supination position compared to the pronation position. CONCLUSIONS: The normal balance of the wrist flexion-extension torques in different forearm positions were characterized. This information might aid the provision of advice regarding the optimal positions for performing specific tasks and could help to elucidate the pathophysiology of epicondylitis.

A favourable suture method for size-mismatched nerve transfer: a case series of intercostal-to-musculocutaneous nerve transfer for brachial plexus injury.

We review a nerve suture method for size-mismatched nerve transfers and report a case series involving patients with brachial plexus injury who underwent intercostal-to-musculocutaneous nerve transfer using this method.

Optimization of Traction Magnetic Resonance Imaging to Improve Visibility of the Elbow Cartilage.

We previously reported that elbow magnetic resonance imaging (MRI) with 7 kg traction increases the joint space width of the radiocapitellar joint and improves articular cartilage visibility without arthrography. However, the optimal traction weight remains unclear. We assessed the effects of different traction weights on elbow MRI in 30 healthy volunteers. Elbow MRI was performed without traction and with 3, 5, and 7 kg axial tractions. The joint space width, humeral articular cartilage outline visibility, and intraprocedural pain/discomfort were evaluated. The joint and cartilage parameters were measured at the radiocapitellar joint and the lateral and medial thirds of the ulnohumeral joint. At the radiocapitellar joint, the joint space width increased significantly with traction. The cartilage outline visibility significantly increased with traction, with no significant differences among the traction weights. No significant result was observed at the lateral and medial thirds of the ulnohumeral joint. Pain and discomfort significantly increased as we used heavier traction weights. Elbow MRI with 3 kg traction showed sufficient effects similar to those observed with 7 kg traction with minimal pain and discomfort. There was no difference in the effect of traction between male and female participants. This procedure may enable enhanced visualization of intra-articular elbow injuries.

Three-Dimensional Morphometric Analysis of the Volar Cortical Shape of the Lunate Facet of the Distal Radius.

In cases of distal radius fractures, the fixation of the volar lunate facet fragment is crucial for preventing volar subluxation of the carpal bones. This study aims to clarify the sex differences in the volar morphology of the lunate facet of the distal radius and its relationship with the transverse diameter of the distal radius. Sixty-four CT scans of healthy wrists (30 males and 34 females) were evaluated. Three-dimensional (3D) images of the distal radius were reconstructed from the CT data. We defined reference point 1 as the starting point of the inclination toward the distal volar edge, reference point 2 as the volar edge of the joint on the bone axis, and reference point 3 as the volar edge of the distal radius lunate facet. From the 3D coordinates of reference points 1 to 3, the bone axis distance, volar-dorsal distance, radial-ulnar distance, 3D straight-line distance, and inclination angle were measured. The transverse diameter of the radius was measured, and its correlations with the parameters were evaluated. It was found that in males, compared to females, the transverse diameter of the radius is larger and the protrusion of the volar lunate facet is greater. This suggests that the inclination of the volar surface is steeper in males and that the volar locking plate may not fit properly with the volar cortical bone of the lunate facet, necessitating additional fixation.

Pathophysiology of sex difference in refractoriness in lateral epicondylitis: Biomechanical study of wrist torque.

Eccentric contractions of the wrist extensors worsen lateral epicondylitis (LE), whose pathophysiology may involve sex differences in wrist torque. This study aimed to investigate sex differences in wrist torque in patients with LE. The wrist extension and flexion torques of 22 patients with LE (11 males and 11 females) were measured. Maximum muscle output over time was measured for 20 s, initial torque was defined as muscle strength, and the degree of eccentric contraction was quantified and defined as the eccentric contraction index (ECI). The affected/unaffected side ratio of the wrist extensor, extensor/flexor ratio of muscle strength, and affected/unaffected side difference of ECI between sexes were statistically analyzed. Furthermore, correlations between wrist extensor torque, ECI, and Visual Analog Scale of pain during the examination were evaluated. Females were found to display lower affected/unaffected side ratios of the wrist extensor and wrist extension/flexion ratios for the affected side, compared with males; however, no differences were found in the wrist extension/flexion ratios for the unaffected side in both sexes. Additionally, females presented with larger differences between the affected and unaffected sides in the ECI. Based on correlations between wrist torques, ECI, and pain, females tended to suppress muscle output to prevent pain from eccentric contraction of wrist extensors more than males, which would induce an imbalance in muscle strength of the wrist extensors and flexors. This imbalance may result in chronic eccentric contraction of the wrist extensors with gripping, exacerbating LE.

The Effect of Axial Traction MRI on the Articular Cartilage Visibility in Thumb Carpometacarpal Arthritis.

OBJECTIVES: Thumb carpometacarpal arthritis has a high incidence. However, the degree of damage to the cartilage has not been accurately assessed. The purpose of this study was to examine the effects of axial traction of the thumb carpometacarpal joint during magnetic resonance imaging (MRI) on the visibility of articular cartilage in patients with thumb carpometacarpal arthritis and to evaluate the articular cartilage defect using MRI findings. MATERIALS AND METHODS: Forty-four patients with thumb carpometacarpal arthritis (14 males, 30 females) and a mean age of 67.3±8.6 years were classified according to Eaton Stages 1, 2, 3, and 4 in 2, 14, 24, and 4 patients, respectively. Axial traction MRI was performed with and without traction (3 kg) using 3-Tesla MRI (Siemens Magnetom Skyra) with a 3D T2* multiecho data imaging combination. The effectiveness of traction was verified using the joint space width before and after traction at five points (central, volar, dorsal, radial, and ulnar margins) and the original articular cartilage outline visibility classification (poor, intermediate, complete). The rate of remaining cartilage on each joint surface was also evaluated. Statistical significance was set at p<0.05 in this study. RESULTS: Joint space width increased significantly at all points with traction (P<0.01). The grade of articular cartilage outline visibility significantly improved from seven intermediate and 37 poor cases to 15 complete, 23 intermediate, and six poor cases (P<0.01). Significantly more articular cartilage remained in Stages 1-2 compared with Stages 3-4 arthritis of both articular surfaces (P<0.01 in first metacarpal, P=0.01 in trapezium). CONCLUSION: Axial traction of the thumb increased the joint space width and improved articular cartilage visibility in the thumb carpometacarpal joint. Our results suggested that axial traction MRI can be used for noninvasive evaluation of articular cartilage defects in patients with thumb carpometacarpal arthritis and aid in selecting the optimal surgical procedure.

Development of Augmented Reality Vision for Osteosynthesis Using a 3D Camera.

BACKGROUND: We developed a 3D camera system to track motion in a surgical field. This system has the potential to introduce augmented reality (AR) systems non-invasively, eliminating the need for the invasive AR markers conventionally required. The present study was performed to verify the real-time tracking accuracy of this system, assess the feasibility of integrating this system into the surgical workflow, and establish its potential to enhance the accuracy and efficiency of orthopedic procedures. METHODS: To evaluate the accuracy of AR technology using a 3D camera, a forearm bone model was created. The forearm model was depicted using a 3D camera, and its accuracy was verified in terms of the positional relationship with a 3D bone model created from previously imaged CT data. Images of the surgical field (capturing the actual forearm) were taken and saved in nine poses by rotating the forearm from pronation to supination. The alignment of the reference points was computed at the three points of CT versus the three points of the 3D camera, yielding a 3D rotation matrix representing the positional relationship. In the original system, a stereo vision-based 3D camera, with a depth image resolution of 1280×720 pixels, 30 frames per second, and a lens field of view of 64 specifications, with a baseline of 3 cm, capable of optimally acquiring real-time 3D data at a distance of 40-60 cm from the subject was used. In the modified system, the following modifications were made to improve tracking performance: (1) color filter processing was changed from HSV to RGB, (2) positional detection accuracy was modified with supporting marker sizes of 8 mm in diameter, and (3) the detection of marker positions was stabilized by calculating the marker position for each frame. Tracking accuracy was examined with the original system and modified system for the following parameters: differences in the rotation matrix, maximum and minimum inter-reference point errors between CT-based and camera-based 3D data, and the average error for the three reference points. RESULTS: In the original system, the average difference in rotation matrices was 5.51±2.68 mm. Average minimum and maximum errors were 1.10±0.61 and 15.53±12.51 mm, respectively. The average error of reference points was 6.26±4.49 mm. In the modified system, the average difference in rotation matrices was 4.22±1.73 mm. Average minimum and maximum errors were 0.79±0.49 and 1.94±0.87 mm, respectively. The average error of reference points was 1.41±0.58 mm. In the original system, once tracking failed, it was difficult to recover tracking accuracy. This resulted in a large maximum error in supination positions. These issues were resolved by the modified system. Significant improvements were achieved in maximum errors and average errors using the modified system (P<0.05). CONCLUSION: AR technology using a 3D camera was developed. This system allows direct comparisons of 3D data from preoperative CT scans with 3D data acquired from the surgical field using a 3D camera. This method has the advantage of introducing AR into the surgical field without invasive markers.

Optimal Limb Position for the Stress Ultrasound Evaluation of Elbow Valgus Laxity in Baseball Players.

Background: The optimal limb position during stress ultrasound (SUS) evaluation of elbow valgus laxity has not been standardized. Purpose: To compare 2 elbow positions (at 90° and 30° of flexion) and report which position method better represents the increased valgus laxity characteristics of baseball players. Study Design: Controlled laboratory study. Methods: Eighteen college baseball players with no history of elbow pain or elbow disorders who belonged to a college baseball club between April and November 2021 participated in this study. The medial elbow joint space (MEJS) was recorded by ultrasonography at rest and under valgus stress, and the difference in MEJS between the conditions was considered the valgus laxity. For all participants, the MEJS was recorded at 90° and 30° of elbow flexion. In the 90° of flexion position, the participant was positioned in the supine position with abduction and external rotation of the shoulder, and 2.5 kgf of valgus stress was applied proximally to the wrist. In the 30° of flexion position, the participant was positioned in the sitting position with abduction and external rotation of the shoulder, and 3.0 kgf of valgus stress was applied to the ulnar head. Valgus laxity on the throwing and nonthrowing sides was compared between the 2 elbow positions using paired t tests or Wilcoxon signed-rank tests after checking the normality. Results: There was a significant difference in valgus laxity on the throwing side between the 90° and 30° of flexion positions (1.9 vs 1.1 mm, respectively; P = .002), whereas no significant difference between positions was seen on the nonthrowing side (P = .06). Conclusion: SUS with the elbow flexed at 90° more clearly detected valgus laxity in the study participants than the 30° of flexion position. Clinical Relevance: The quantitative evaluation of valgus laxity is important for baseball players to assess the risk of ulnar collateral ligament injury.

Irreducible isolated anteromedial radial head dislocation due to ruptured anterior capsule and annular ligament interposition: A case report.

Traumatic radial head dislocation without a bone-associated lesion is uncommon, and irreducible cases are rare. We herein present a case of isolated irreducible anteromedial radial head dislocation due to anterior capsule and annular ligament interposition in a 16-year-old female patient. The patient was injured when she was thrown by an opponent during a judo match, and her right elbow was outstretched, combined with forearm pronation. Open reduction was required because of soft tissue interposition into the radiocapitellar joint. The ruptured anterior capsule and annular ligament were repaired using the overlapping suture technique; hence, the radial head was stabilized. At 3.5 years follow-up, the patient had satisfactory elbow function, and redislocation did not occur; however, mild degenerative changes were observed on radiographs. We discussed the injury mechanism using anatomical features in this case and previous literature.

An isolated rupture of the flexor digitorum tendon of the index finger following volar locking plate fixation of a distal radius fracture: A case report.

Volar locking plates (VLP) have been widely used recently to treat distal radius fractures and are considered the gold standard. One of the most common complications of distal radius fracture surgery is flexor pollicis longus rupture, which may also occur in other tendons. Here, we report a case of isolated rupture of the flexor digitorum profundus to the index finger after VLP fixation of a distal radial fracture. Only a few cases of this have been reported in the literature. In previously reported cases, the cause of tendon rupture was repetitive mechanical stress due to implant protrusion. In our case, the plate was placed too distally; however, soft tissue completely covered the distal part of the plate. There was obvious synovitis within the carpal tunnel; therefore, pressure within the carpal tunnel may have increased. The cause of rupture in our case was thought to be a combination of direct mechanical stress and poor circulation due to inadequate VLP fixation.

Isolated Distal Interphalangeal Joint Flexion Contracture of the Ring Finger due to Dupuytren Disease: A Case Report.

Dupuytren disease is a common benign fibromatosis of the palmar and finger fascia caused by pathological cord formation. As both the retrovascular and lateral cords are jointly responsible for the flexion contracture of the distal interphalangeal (DIP) joint, isolated DIP joint contracture caused by Dupuytren disease is rare. We present a 34-year-old right-hand-dominant male patient with a 6-month history of an isolated DIP joint flexion contracture in the right ring finger due to Dupuytren disease. Surgical fasciotomy of the retrovascular cord improved the contracture without adverse events. It is important to pay attention to the anatomical relationships between the pathological cord and neurovascular bundle to avoid neurovascular injury during fasciotomy in patients with Dupuytren disease, especially in isolated DIP joint contracture cases. Level of Evidence: Level V (Therapeutic).

A favorable suture method for size-mismatched nerve transfer: comparison with standard perineural suture in an experimental rat study.

BACKGROUND: In nerve transfer for peripheral nerve injury, it is sometimes necessary to suture size-mismatched nerves. In 1993, a favorable suture method called the Ochiai suture method for size-mismatched nerve transfer was reported. However, there is currently a lack of substantial evidence beyond the original report. Therefore, this study aimed to verify the advantages of using the Ochiai suture method for size-mismatched nerve transfer. METHODS: A total of 18 rats were evaluated in this study and randomly divided into two groups. All rats underwent femoral to sciatic nerve transfer. Specifically, group A (n = 10) underwent the Ochiai suture method, while group B (n = 8) underwent the perineural suture method. After 12 weeks postoperatively, we conducted the sciatic functional index (SFI) test, measured muscle wet-weight, and performed histological evaluations. All data were compared between the two groups, with Welch's t test for normally distributed data and Mann-Whitney's U test for non-normally distributed data. Statistical significance was set at p < 0.05. RESULTS: The mean number of axons was significantly greater in group A than in group B at 5 mm distal to the stump (p = 0.04). Additionally, the average axonal diameter was significantly greater in group A than in group B at 5 mm and 10 mm distal to the stump (p < 0.01 and p < 0.01, respectively). However, the SFI test and measured muscle wet-weight values showed no significant differences between the two groups. CONCLUSIONS: Our study revealed that the Ochiai suture method for size-mismatched nerve transfer in rats increases the regenerative axon numbers and diameters. These findings suggest that the Ochiai suture method could be a valuable approach for achieving effective motor function restoration in cases of size-mismatched nerve transfer.

3D Reconstruction of Wrist Bones from C-Arm Fluoroscopy Using Planar Markers.

In orthopedic surgeries, such as osteotomy and osteosynthesis, an intraoperative 3D reconstruction of the bone would enable surgeons to quickly assess the fracture reduction procedure with preoperative planning. Scanners equipped with such functionality are often more expensive than a conventional C-arm fluoroscopy device. Moreover, a C-arm fluoroscopy device is commonly available in many orthopedic facilities. Based on the widespread use of such equipment, this paper proposes a method to reconstruct the 3D structure of bone with a conventional C-arm fluoroscopy device. We focus on wrist bones as the target of reconstruction in this research as this will facilitate a flexible imaging scheme. Planar markers are attached to the target object and are tracked in the fluoroscopic image for C-arm pose estimation. The initial calibration of the device is conducted using a checkerboard pattern. In general, reconstruction algorithms are sensitive to geometric calibration errors. To assess the practicality of the method for reconstruction, a simulation study demonstrating the effect of checkerboard thickness and spherical marker size on reconstruction quality was conducted.