RESUMO
Mycoplasma pneumoniae (MP) is primarily recognized as a respiratory pathogen that causes community-acquired pneumonia, which can lead to acute upper and lower airway inflammation and extrapulmonary syndrome. Refractory pneumonia caused by MP can cause severe complications and even be life-threatening, particularly in infants and the elderly. It is well-known that non-coding RNAs (ncRNAs) represented by miRNAs, lncRNAs and circRNAs have been manifested to be widely involved in the regulation of gene expression. Growing evidence indicates that these ncRNAs have distinct differentiated expression in MP infection and affect multiple biological processes, playing an indispensable role in the initiation and promotion of MP infection. However, the epigenetic mechanisms involved in the development of MP infection remain unclear. This article reviews the mechanisms by which miRNAs, lncRNAs, and circRNAs mediate MP infection, such as inflammatory responses, apoptosis and pulmonary fibrosis. Focusing on miRNAs, lncRNAs and circRNAs associated with MP infection could provide new insights into this disease's early diagnosis and therapeutic approaches.
Assuntos
MicroRNAs , Pneumonia por Mycoplasma , RNA Longo não Codificante , Lactente , Humanos , Idoso , Pneumonia por Mycoplasma/tratamento farmacológico , Pneumonia por Mycoplasma/genética , MicroRNAs/genética , RNA Circular/genética , RNA Circular/uso terapêutico , RNA Longo não Codificante/genética , RNA Longo não Codificante/metabolismo , RNA Longo não Codificante/uso terapêutico , Mycoplasma pneumoniae/genéticaRESUMO
Powdered activated carbon (PAC) adsorption is regarded as an efficient method for removing odorants from drinking water. However, in eutrophic aquatic environments, the presence of algal organic matter (AOM) produced by cyanobacteria considerably impedes the adsorption of odorous compounds by activated carbon. This study focused on investigating the adsorption characteristics of three representative odorants: 2-methylisoborneol (2-MIB), ß-cyclocitral (ß-cyclo), and butyl sulfide (BS) by PAC and the effects of AOM on the PAC adsorption of odorants. The removal of the three odorants reached 83.5-97.5% at a PAC dosage of 10 mg/L after 12 h of exposure in a competition-free scenario. The adsorption kinetics demonstrated higher conformity (R2 > 0.9) with the pseudo-second-order model, whereas the adsorption capacity exhibited stronger conformity (R2 > 0.9) with the Freundlich model. The presence of AOM resulted in varying levels of competition for PAC for the adsorption of the three odorants. As the concentration of AOM increased from 0 to 5 mg C/L, the removal of 2-MIB was the most affected (from 83.5% to 10.0%), followed by ß-cyclo (from 86.6% to 55.0%), and BS (from 97.5% to 92.0%). The competitive adsorption of AOM at the molecular level was studied using density functional theory (DFT). The DFT results suggested that odorants with higher and more uniformly distributed electrostatic potentials exhibited a heightened affinity for PAC adsorption and a diminished susceptibility to disruption caused by AOM. This study provides valuable insights into the mitigation of odorous compounds during drinking water purification.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Adsorção , Carvão Vegetal , Odorantes , Purificação da Água/métodosRESUMO
The problem of taste and odor (T&O) in drinking water is a widespread societal concern and highlights substantial challenges related to the detection and evaluation of odor in water. In this study, the portable electronic nose PEN3, which is equipped with ten different heated metal sensors, was applied to analyze its applicability, feasibility and application scenarios for the detection of typical odorants, such as 2-methylisobornel (2-MIB), geosmin (GSM), ß-cyclocitral, ß-ionone, and other T&O compounds in source water, while avoiding uncertainties and instability related to manual inspection. All the T&O compounds could be effectively differentiated by principal component analysis (PCA). Linear discriminant analysis (LDA) showed that the odors varied greatly between different samples and could be effectively distinguished. As the odorant concentration increased, the sensor response intensity of the primary identification sensors R6 and R8 increased with a significant positive correlation. For Microcystis aeruginosa, an algae that produces odorants, PCA could distinguish the odors of algae at a series of densities at different concentrations. The responses of R10 showed a significant increase with increasing algae density, implying the production of more aliphatic hydrocarbons and other odor compounds. The results indicated that the electronic nose could provide a promising alternative to traditional unstable and complex detection methods for the detection of odorous substances in surface water and early warning of odor events. This study aimed to provide technical support for rapid monitoring and early warning of odorants in source water management.
Assuntos
Água Potável , Microcystis , Odorantes/análise , Nariz Eletrônico , Água Potável/análiseRESUMO
Cyanobacteria can sense different light color by adjusting the components of photosynthetic pigments including chlorophyll a (Chl a), phycoerythrin (PE), and phycocyanin (PC), etc. Filamentous cyanobacteria are the main producer of 2-methylisoborneol (MIB) and many can increase their PE levels so that they are more competitive in subsurface layer where green light is more abundant, and have caused extensive odor problems in drinking water reservoirs. Here, we identified the potential correlation between MIB biosynthesis and ambient light color induced chromatic acclimation (CA) of a MIB-producing Pseudanabaena strain. The results suggest Pseudanabaena regulates the pigment proportion through Type III CA (CA3), by increasing PE abundance and decreasing PC in green light. The biosynthesis of MIB and Chl a share the common precursor, and are positively correlated with statistical significance regardless of light color (R2=0.68; p<0.001). Besides, the PE abundance is also positively correlated with Chl a in green light (R2=0.57; p=0.019) since PE is the antenna that can only transfer the energy to PC and Chl a. In addition, significantly higher MIB production was observed in green light since more Chl a was synthesized.
Assuntos
Cianobactérias , Clorofila A , Cianobactérias/fisiologia , Ficoeritrina , Ficocianina , AclimataçãoRESUMO
Microbial Mn(II) oxidation occurs in areas with insufficient disinfectants in drinking water distribution systems. However, the overall processes of microbial-mediated Mn deposit formation are unclear. This research investigated the initial Mn(II) oxidation, deposit accumulation, and biofilm development in pipe loops fed with nondisinfected finished water for 300 days. The results show that it took 20 days for microbial Mn(II) oxidation and deposition to be initiated visibly in new pipes continuously receiving 100 µg/L Mn(II). Once started, the deposit accumulation accelerated. A pseudo-first-order kinetic model could simulate the disappearance of Mn(II) in well-mixed pipe loop water. The observed rate constant reached 2.81 h-1 [corresponding to a Mn(II) half-life of 0.25 h] after 136 days of operation. Without oxygen, Mn(II) in the water also decreased rapidly to 1.0 µg/L through adsorption to deposits, indicating that after the initial microbial formation of MnOx, subsequent MnOx accumulation was attributable to a combination of microbial and physicochemical processes. Compared to the no-Mn condition, Mn(II) input resulted in 1 order of magnitude increase in biofilm formation. This study sheds light on the increasingly rapid processes of Mn accumulation on the inner surfaces of water pipes resulting from the biological activity of Mn(II)-oxidizing biofilms and the build-up of MnOx with strong adsorption capacity.
Assuntos
Desinfetantes , Água Potável , Biofilmes , Manganês , OxirreduçãoRESUMO
The oxidation of residual Mn(II) in finished water can lead to MnOx deposit formation in drinking water pipes. Previous work has illustrated that microbes readily cause Mn deposit build-up in nondisinfected pipes. Here, we investigated how disinfectant type and dose affected Mn(II) oxidation and MnOx accumulation through long-term pipe experiments using water produced by a full-scale water treatment plant. The results showed that Mn(II) oxidation initiated quickly in the new pipes chlorinated with 1.0 mg/L free chlorine. After 130 days of MnOx accumulation, 100 µg/L Mn(II) in water could drop to 1.0 µg/L within 1.5 h, resulting from autocatalytic Mn(II) oxidation and Mn(II) adsorption by MnOx deposits accumulated on pipe walls. In contrast to chlorination, chloramination (1.0 mg/L Cl2) caused almost no MnOx accumulation during the entire study period. The underlying mechanism was probably that monochloramine inhibited microbial Mn(II) oxidation without causing significant abiotic Mn(II) oxidation like free chlorine. A low free chlorine dose (0.3 mg/L) also reduced Mn deposit formation by mass but to a lesser extent than chloramination. After disinfection (chlorination or chloramination) was discontinued for days, biotic Mn(II) oxidation occurred, and this process was inhibited again once disinfection was resumed. In addition, Fe(III) of 200 µg/L enhanced the stability of MnOx accumulated on pipe surfaces, while humic acid induced MnOx deposit resuspension. Overall, this study highlighted the regulating role of disinfectants in MnOx formation and provided insights into developing appropriate disinfection strategies for Mn deposit control.
Assuntos
Desinfetantes , Água Potável , Purificação da Água , Cloraminas , Cloro , Desinfecção/métodos , Compostos Férricos , Manganês , Purificação da Água/métodosRESUMO
Despite the significant progresses made in all-polymer solar cells (all-PSCs) recently, the relatively low short-circuit current density (Jsc) and large energy loss are still quite difficult to overcome for further development. To address these challenges, we developed a new class of narrow-bandgap polymer acceptors incorporating a benzotriazole (BTz)-core fused-ring segment, named the PZT series. Compared to the commonly used benzothiadiazole (BT)-containing polymer PYT, the less electron-deficient BTz renders PZT derivatives with significantly red-shifted optical absorption and up-shifted energy levels, leading to simultaneously improved Jsc and open-circuit voltage in the resultant all-PSCs. More importantly, a regioregular PZT (PZT-γ) has been developed to achieve higher regiospecificity for avoiding the formation of isomers during polymerization. Benefiting from the more extended absorption, better backbone ordering, and more optimal blend morphology with donor component, PZT-γ-based all-PSCs exhibit a record-high power conversion efficiency of 15.8% with a greatly enhanced Jsc of 24.7 mA/cm2 and a low energy loss of 0.51 eV.
RESUMO
A complex dataset with 140 sampling events was generated using triple quadrupole gas chromatography-mass spectrometer to track the occurrence of 95 odorants in raw and finished water from 98 drinking water treatment plants in 31 cities across China. Data analysis identified more than 70 odorants with concentrations ranging from not detected to thousands of ng/L. In raw water, Pearson correlation analysis determined that thioethers, non-oxygen benzene-containing compounds, and pyrazines were classes of chemicals that co-occurred, and geosmin and p(m)-cresol, as well as cyclohexanone and benzaldehyde, also co-occurred, indicating similar natural or industrial sources. Based on classification and regression tree analysis, total dissolved organic carbon and geographical location were identified as major factors affecting the occurrence of thioethers. Indoles, phenols, and thioethers were well-removed through conventional and advanced treatment processes, while some aldehydes could be generated. For other odorants, higher removal was achieved by ozonation-biological activated carbon (39.3%) compared to the conventional treatment process (14.5%). To our knowledge, this is the first study to systematically identify the major odorants in raw water and determine suitable treatment strategies to control their occurrence by applying data analytics and statistical methods to the complex dataset. These provide informative reference for odor control and water quality management in drinking water industry.
Assuntos
Água Potável , Poluentes Químicos da Água , Purificação da Água , Ciência de Dados , Matéria Orgânica Dissolvida , Odorantes/análise , Poluentes Químicos da Água/análiseRESUMO
Dyslipidemia is a common, chronic metabolic disease associated with cardiovascular complications. Due to the multiplicity of etiological factors, the pathogenesis of dyslipidemia is still unclear. In this study, we combined proteomics and metabolomics methods to analyze the plasma of patients with dyslipidemia and healthy subjects. isobaric tags for relative and absolute quantification (iTRAQ) markers, combined with LC-MS/MS proteomics technology and the UHPLC/Orbitfast-X Tribrid system, were used to establish the metabolite profile in clinical dyslipidemia. A total of 137 differentially expressed proteins, mainly related to biological processes such as protein activation cascades, adaptive immune responses, complement activation, acute inflammatory responses, and regulation of acute inflammatory responses, were identified. These proteins are involved in the regulation of important metabolic pathways, such as immunity and inflammation, coagulation and hemostasis, lipid metabolism, and oxidation and antioxidant defenses. The analysis of clinical metabolites showed there were 69 different metabolites in plasma, mainly related to glycerolipid, sphingolipid, porphyrin, α-linolenic acid, linoleic acid, and arachidonic acid metabolism, suggesting that the regulation of inflammation and lipid metabolism may be disturbed in patients with dyslipidemia. Among these, significant changes were observed in indole-3-propionic acid (IPA), which is considered as a potential biomarker of dyslipidemia. The combined analysis of proteins and metabolites showed that arachidonic acid, linoleic acid, and lipid metabolic pathways were closely related to dyslipidemia. IPA may be a potential biomarker. The information provided in this study may provide new insights into the pathogenesis of animal models of dyslipidemia and related disease models, as well as potential intervention targets.
Assuntos
Dislipidemias , Metaboloma/fisiologia , Metabolômica/métodos , Proteoma/análise , Proteômica/métodos , Adulto , Biomarcadores/sangue , Biomarcadores/metabolismo , Proteínas Sanguíneas/análise , Cromatografia Líquida , Dislipidemias/sangue , Dislipidemias/metabolismo , Humanos , Redes e Vias Metabólicas , Espectrometria de Massas em Tandem , Adulto JovemRESUMO
Odor problems in source water caused by 2-methylisoborneol (MIB) have been a common issue in China recently, posing a high risk to drinking water safety. The earthy-musty odorant MIB has an extremely low odor threshold (4-16 ng/L) and is hard to remove via conventional processes in drinking water plants (DWP), and therefore could easily provoke complaints from consumers. This compound is produced by a group of filamentous cyanobacteria, mainly belonging to Oscillatoriales. Different from the well-studied surface-blooming Microcystis, filamentous cyanobacteria have specific niche characteristics that allow them to stay at a subsurface or deep layer in the water column. The underwater bloom of these MIB producers is therefore passively determined by the underwater light availability, which is governed by the cell density of surface scum. This suggests that drinking water reservoirs with relatively low nutrient contents are not able to support surface blooms, but are a fairly good fit to the specialized ecological niche of filamentous cyanobacteria; this could explain the widespread odor problems in source water. At present, MIB is mainly treated in DWP using advanced treatment processes and/or activated carbon, but these post-treatment methods have high cost, and not able to deal with water containing high MIB concentrations. Thus, in situ control of MIB producers in source water is an effective complement and is desirable. Lowering the underwater light availability is a possible measure to control MIB producers according to their niche characteristics, which can be obtained by either changing the water level or other measures.
Assuntos
Cianobactérias , Água Potável , Microcystis , Purificação da Água , Ecossistema , Odorantes/análiseRESUMO
Noncovalently fused-ring electron acceptors (NFREAs) have attracted much attention in recent years owing to their advantages of simple synthetic routes, high yields and low costs. However, the efficiencies of NFREAs based organic solar cells (OSCs) are still far behind those of fused-ring electron acceptors (FREAs). Herein, a series of NFREAs with Sâ â â O noncovalent intramolecular interactions were designed and synthesized with a two-step synthetic route. Upon introducing π-extended end-groups into the backbones, the electronic properties, charge transport, film morphology, and energy loss were precisely tuned by fine-tuning the degree of multi-fluorination. As a result, a record PCE of 14.53 % in labs and a certified PCE of 13.8 % for NFREAs based devices were obtained. This contribution demonstrated that combining the strategies of noncovalent conformational locks and π-extended end-group engineering is a simple and effective way to explore high-performance NFREAs.
RESUMO
Side-chain engineering is an effective strategy to regulate the solubility and packing behavior of organic materials. Recently, a unique strategy, so-called terminal side-chain (T-SC) engineering, has attracted much attention in the field of organic solar cells (OSCs), but there is a lack of deep understanding of the mechanism. Herein, a new noncovalently fused-ring electron acceptor (NFREA) containing two T-SCs (NoCA-5) was designed and synthesized. Introduction of T-SCs can enhance molecular rigidity and intermolecular π-π stacking, which is confirmed by the smaller Stokes shift value, lower reorganization free energy, and shorter π-π stacking distance in comparison to NoCA-1. Hence, the NoCA-5-based device exhibits a record power conversion efficiency (PCE) of 14.82 % in labs and a certified PCE of 14.5 %, resulting from a high electron mobility, a short charge-extraction time, a small Urbach energy (Eu ), and a favorable phase separation.
RESUMO
The microbial community is an important factor influencing the health of the water ecosystem in landscape lakes; in particular, proliferation of some cyanobacteria could cause odor problems. Exploring the microbial community is important for water quality management. In this study, focusing on seven landscape lakes in Beijing, the microbial communities were investigated based on 16S rRNA gene amplicon sequencing, and typical odor-causing compounds and interfering factors were identified. The results showed that 2-methylisoborneol (MIB) was the major odor-causing compound responsible for the earthy/musty odor in landscape lakes. For algal communities, Chlorella and Diatoms were the main eukaryote algae in the water. The bacterial community was dominated by Proteobacteria at the phylum level, and then Cyanobacteria, Actinobacteria, and Firmicutes, etc., most of which were the major phyla of the heterotrophic bacterial population. The richness and diversity of bacteria in natural-water-source lakes were higher than those in reclaimed-water-source lakes. Synechococcus (Cyanobacteria) and GKS98 (Proteobacteria) in reclaimed-water-source lakes were higher than those in natural-water-source lakes, however, CL500-29 (Actinobacteria) in natural-water-source lakes was higher than that in reclaimed-water-source lakes. These bacteria also had significantly positive correlations with MIB. Cyanobacteria and Actinobacteria were the main MIB compound contributors to the variability of MIB in the landscape lakes in Beijing.
Assuntos
Canfanos , Chlorella , Microbiota , Pequim , Lagos , RNA Ribossômico 16S , Microbiologia da ÁguaRESUMO
Triplet acceptors have been developed to construct high-performance organic solar cells (OSCs) as the long lifetime and diffusion range of triplet excitons may dissociate into free charges instead of net recombination when the energy levels of the lowest triplet state (T1 ) are close to those of charge-transfer states (3 CT). The current triplet acceptors were designed by introducing heavy atoms to enhance the intersystem crossing, limiting their applications. Herein, two twisted acceptors without heavy atoms, analogues of Y6, constructed with large π-conjugated core and D-A structure, were confirmed to be triplet materials, leading to high-performance OSCs. The mechanism of triplet excitons were investigated to show that the twisted and D-A structures result in large spin-orbit coupling (SOC) and small energy gap between the singlet and triplet states, and thus efficient intersystem crossing. Moreover, the energy level of T1 is close to 3 CT, facilitating the split of triplet exciton to free charges.
RESUMO
A wide range of compounds with various structural features can cause taste and odor (T&O) problems in drinking water. It would be desirable to determine all of these compounds using a simple analytical method. In this paper, a sensitive method combining liquid-liquid extraction (LLE) with gas chromatography-triple quadrupole tandem mass spectrometry (GC-MS/MS) was established to simultaneously analyze 51 odor-causing compounds in drinking water, including organic sulfides, aldehydes, benzenes, phenols, ethers, esters, ketones, nitrogenous heterocyclic compounds, 2-methylisoborneol and geosmin. Three deuterated analogs of target analytes, dimethyl disulfide-d6, benzaldehyde-d6 and o-cresol-3,4,5,6-d4, were used to correct the variations in recovery, and five isotope-labeled internal standards (4-chlorotoluene-d4, 1, 4-dichlorobenzene-d4, naphthalene-d8, acenaphthene-d10, phenanthrene-d10 respectively) were used prior to analysis to correct the variations arising from instrument fluctuations and injection errors. The calibration curves of the target compounds showed good linearity (R2â¯>â¯0.99, levelâ¯=â¯7), and method detection limits (MDLs) below 1/10 of the odor threshold concentrations were achieved for most of the odorants (0.10-20.55â¯ng/L). The average recoveries of most of the analytes in tap water samples were between 70% and 120%, and the method was reproducible (RSDâ¯<â¯20%, nâ¯=â¯7). Additionally, concentrations of odor-causing compounds in water samples collected from three drinking water treatment plants (DWTPs) were analyzed by this method. According to the results, dimethyl trisulfide, dimethyl disulfide and indole were considered to be the key odorants responsible for the swampy/septic odor. 2-Methylisoborneol and geosmin were detected as the main odor-causing compounds for musty/earthy odor in DWTP B.
Assuntos
Água Potável/análise , Odorantes/análise , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Cromatografia Gasosa-Espectrometria de Massas , Espectrometria de Massas em TandemRESUMO
Hydrogels have attracted large attention in wastewater treatment fields due to their low-cost and good interaction with pollutants, among which novel double network hydrogel is an outstanding class. To expand the application of double network hydrogel in water treatment, in this study, eco-friendly physically cross-linked double network polymer hydrogel beads (DAP) are prepared and studied in depth on the mechanism of Methylene Blue (MB) adsorption; and then the polymer hydrogels are further functionalized by inorganic materials. MB adsorption on DAP favors alkaline condition which is due to the increase of electrostatic attraction and adsorption site, and it reaches equilibrium within 10â¯hr, which is faster than that of the single network hydrogel beads (SAP). Through thermodynamics study, the process shows to be an exothermic and spontaneous process. The adsorption isotherms are well fitted by Langmuir model, with a maximum monolayer adsorption capacity of 1437.48â¯mg/g, which is larger than SAP (1255.75â¯mg/g). After being functionalized with common inorganic materials including activated carbon, Fe3O4 and graphene oxide (GO), the composites show to have larger pore sizes and have obvious increases in adsorption capacity especially the one contains GO. Then the composites contains Fe3O4 are used as heterogeneous Fenton catalyst which shows to have excellent performance in MB degradation. The results indicate the potential of polymer double network to be functionalized in environmental areas.
Assuntos
Corantes/química , Hidrogéis/química , Polímeros/química , Poluentes Químicos da Água/química , Purificação da Água/métodos , Adsorção , Azul de MetilenoRESUMO
Due to the severe restrictions imposed by legislative frameworks, the removal of polyacrylamide (PAM) rapidly and effectively from produced wastewater in offshore oilfields before discharge is becoming an urgent challenge. In this study, a novel advanced oxidation process based on plasma operated in the gas-liquid interface was used to rapidly decompose PAM, and multiple methods including viscometry, flow field-flow fractionation multi-angle light scattering, UV-visible spectroscopy, and attenuated total reflectance-Fourier transform infrared spectroscopy were used to characterize the changes of PAM. Under a discharge voltage of 25â¯kV and pHâ¯7.0, the PAM concentration decreased from 100 to 0â¯mg/L within 20â¯min and the total organic carbon (TOC) decreased from 49.57 to 1.23â¯mg/L within 240â¯min, following zero-order reaction kinetics. Even in the presence of background TOC as high as 152.2â¯mg/L, complete removal of PAM (100â¯mg/L) was also achieved within 30â¯min. The biodegradability of PAM improved following plasma treatment for 120â¯min. Active species (such as O3 and H2O2) were produced in the plasma. Hydroxyl radical was demonstrated to play an important role in the degradation of PAM due to the inhibitory effect observed after the addition of an ·OH scavenger, Na2CO3. Meanwhile, the release of ammonia and nitrate nitrogen confirmed the cleavage of the acylamino group. The results of this study demonstrated that plasma, with its high efficiency and chemical-free features, is a promising technology for the rapid removal of PAM.
Assuntos
Resinas Acrílicas/química , Eliminação de Resíduos Líquidos/métodos , Águas Residuárias/química , Poluentes Químicos da Água/química , Resinas Acrílicas/análise , Biodegradação Ambiental , Peróxido de Hidrogênio/química , Radical Hidroxila , Cinética , Campos de Petróleo e Gás , Oxirredução , Poluentes Químicos da Água/análiseRESUMO
Development of high-performance unipolar n-type organic semiconductors still remains as a great challenge. In this work, all-acceptor bithiophene imide-based ladder-type small molecules BTI n and semiladder-type homopolymers PBTI n ( n = 1-5) were synthesized, and their structure-property correlations were studied in depth. It was found that Pd-catalyzed Stille coupling is superior to Ni-mediated Yamamoto coupling to produce polymers with higher molecular weight and improved polymer quality, thus leading to greatly increased electron mobility (µe). Due to their all-acceptor backbone, these polymers all exhibit unipolar n-type transport in organic thin-film transistors, accompanied by low off-currents (10-10-10-9 A), large on/off current ratios (106), and small threshold voltages (â¼15-25 V). The highest µe, up to 3.71 cm2 V-1 s-1, is attained from PBTI1 with the shortest monomer unit. As the monomer size is extended, the µe drops by 2 orders to 0.014 cm2 V-1 s-1 for PBTI5. This monotonic decrease of µe was also observed in their homologous BTI n small molecules. This trend of mobility decrease is in good agreement with the evolvement of disordered phases within the film, as revealed by Raman spectroscopy and X-ray diffraction measurements. The extension of the ladder-type building blocks appears to have a large impact on the motion freedom of the building blocks and the polymer chains during film formation, thus negatively affecting film morphology and charge carrier mobility. The result indicates that synthesizing building blocks with more extended ladder-type backbone does not necessarily lead to improved mobilities. This study marks a significant advance in the performance of all-acceptor-type polymers as unipolar electron transporting materials and provides useful guidelines for further development of (semi)ladder-type molecular and polymeric semiconductors for applications in organic electronics.
RESUMO
We study the feasibility of measuring pulse duration in the far field in high-energy petawatt lasers using single-shot autocorrelation. This single-shot autocorrelation technique makes use of parametric upconversion in media with randomly oriented ferroelectric domains, which supports transverse second-harmonic generation with two counter-propagating fundamental beams. We show that this technique possesses a large time window, capable of measuring pulses with temporal duration ranging from a sub-picosecond to tens of picoseconds. We test the performance of this technique in the presence of multipulse structures, intensity modulations in the near field, and spatial-temporal coupling in fundamental beams. We also investigate the influence of beam pointing discrepancy on the measurement. Our study can serve as a preliminary experiment for robustly characterizing pulse duration in high-energy petawatt lasers.
RESUMO
Natural organic matter (NOM) represents the major source of precursors for disinfection byproducts (DBPs), such as trihalomethanes (THMs) and haloacetic acids (HAAs), formed during disinfection of drinking water, but the molecular composition and reactivity of NOM remain not well understood. In this study, electrospray ionization coupled to Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used to characterize the molecular composition of NOM of 20 source waters taken across China for the purpose of determining the major precursors of THMs and HAAs at molecular level. It was found that there is a core of NOM compositions that are ubiquitous in different source waters, which is supposed to be more relevant for NOM quality. Formation potentials (FP) of THMs and HAAs were determined for NOM from different source waters during chlorination. Spearman's rank correlation was used to link THMFP and HAAFP with the individual molecular composition of NOM. Significant correlation (P < 0.001) was found between DBPFP and the NOM molecules with a high O/C ratio and low H/C ratio, indicating these molecules could contribute greatly to the formation of THMs and HAAs during chlorination. The link of THMFP and HAAFP with individual NOM molecules may allow us to develop more effective treatment strategies to achieve the drinking water safety objective: effective disinfection of waterborne pathogens while minimizing toxic DBPs.