Single-Ion Polymer Electrolyte Based on Lithium-Rich Imidazole Anionic Porous Aromatic Framework for High Performance Lithium-Ion Batteries.

The low ionic conductivity and Li+ transference number ( t L i + ${t}_{L{i}^ + }$ ) of solid polymer electrolytes (SPEs) seriously hinder their application in lithium-ion batteries (LIBs). In this study, a novel single-ion lithium-rich imidazole anionic porous aromatic framework (PAF-220-Li) is designed. The abundant pores in PAF-220-Li are conducive to the Li+ transfer. Imidazole anion has low binding force with Li+ . The conjugation of imidazole and benzene ring can further reduce the binding energy between Li+ and anions. Thus, only Li+ moved freely in the SPEs, remarkably reducing the concentration polarization and inhibiting lithium dendrite growth. PAF-220-quasi-solid polymer electrolyte (PAF-220-QSPE) is prepared through solution casting of Bis(trifluoromethane)sulfonimide lithium (LiTFSI) infused PAF-220-Li and Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP), and possessed excellent electrochemical performance. The electrochemical property are further improved by preparing all-solid polymer electrolyte (PAF-220-ASPE) via pressing-disc method, which has a high Li+ conductivity of 0.501 mS cm-1 and t L i + ${t}_{L{i}^ + }$ of 0.93. The discharge specific capacity at 0.2 C of Li//PAF-220-ASPE//LFP reached 164 mAh g-1 , and the capacity retention rate is 90% after 180 cycles. This study provided a promising strategy for SPE with single-ion PAFs to achieve high-performance solid-state LIBs.

Ligand-Engineered HgTe Colloidal Quantum Dot Solids for Infrared Photodetectors.

HgTe colloidal quantum dots (CQDs) are promising absorber systems for infrared detection due to their widely tunable photoresponse in all infrared regions. Up to now, the best-performing HgTe CQD photodetectors have relied on using aggregated CQDs, limiting the device design, uniformity and performance. Herein, we report a ligand-engineered approach that produces well-separated HgTe CQDs. The present strategy first employs strong-binding alkyl thioalcohol ligands to enable the synthesis of well-dispersed HgTe cores, followed by a second growth process and a final postligand modification step enhancing their colloidal stability. We demonstrate highly monodisperse HgTe CQDs in a wide size range, from 4.2 to 15.0 nm with sharp excitonic absorption fully covering short- and midwave infrared regions, together with a record electron mobility of up to 18.4 cm2 V-1 s-1. The photodetectors show a room-temperature detectivity of 3.9 × 1011 jones at a 1.7 µm cutoff absorption edge.

Cation-Exchange Enables In Situ Preparation of PbSe Quantum Dot Ink for High Performance Solar Cells.

Lead selenide (PbSe) colloidal quantum dots (CQDs) are promising candidates for optoelectronic applications. To date, PbSe CQDs capped by halide ligands exhibit improved stability and solar cells using these CQDs as active layers have reported a remarkable power conversion efficiency (PCE) up to 10%. However, PbSe CQDs are more prone to oxidation, requiring delicate control over their processability and compromising their applications. Herein, an efficient strategy that addresses this issue by an in situ cation-exchange process is reported. This is achieved by a two-phase ligand exchange process where PbI2 serves as both a passivating ligand and cation-source inducing transformation of CdSe to PbSe. The defect density and carrier lifetime of PbSe CQD films are improved to 1.05 × 1016  cm-3 and 12.2 ns, whereas the traditional PbSe CQD films possess 1.9 × 1016  cm-3 defect density and 10.2 ns carrier lifetime. These improvements are translated into an enhancement of photovoltaic performance of PbSe solar cells, with a PCE of up to 11.6%, ≈10% higher than the previous record. Notably, the approach enables greatly improved stability and a two-month stability is successfully demonstrated. This strategy is expected to promote the fast development of PbSe CQD applications in low-cost and high-performance optoelectronic devices.

Colloidal Alloyed Quantum Dots with Enhanced Photoluminescence Quantum Yield in the NIR-II Window.

Semiconductor quantum dots (QDs) with photoluminescence (PL) emission at 900-1700 nm (denoted as the second near-infrared window, NIR-II) exhibit much-depressed photon absorption and scattering, which has stimulated extensive researches in biomedical imaging and NIR devices. However, it is very challenging to develop NIR-II QDs with a high photoluminescence quantum yield (PLQY) and excellent biocompatibility. Herein, we designed and synthesized an alloyed silver gold selenide (AgAuSe) QD with a bright emission from 820 to 1170 nm and achieved a record absolute PLQY of 65.3% at 978 nm emission among NIR-II QDs without a toxic element and a long lifetime of 4.58 µs. It is proved that the high PLQY and long lifetime are mainly attributed to the prevented nonradiative transition of excitons, probably resulted from suppressing cation vacancies and crystal defects from the high mobility of Ag ions by alloying Au atoms. These high-PLQY QDs with nontoxic heavy metal exhibit great application potential in bioimaging, light emitting diodes (LEDs), and photovoltaic devices.

Pb-Doped Ag2 Se Quantum Dots with Enhanced Photoluminescence in the NIR-II Window.

Ag2 Se quantum dots (QDs) as an effective biological probe in the second near-infrared window (NIR-II, 1000-1700 nm) have been widely applied in bioimaging with high tissue penetration depth and high spatiotemporal resolution. However, the ions deficiency and crystal defects caused by the high Ag+ mobility in Ag2 Se crystals are mainly responsible for the inefficient photoluminescence (PL) of Ag2 Se QDs. Herein, a tailored route is reported to achieve controllable doping of Ag2 Se QDs in which Ag is exchanged by Pb via cation exchange (CE), which is unattainable by direct synthetic methods. The Pb-doped Ag2 Se QDs (denoted as Pb:Ag2 Se QDs) present fire-new optical features with significantly enhanced PL intensity of 4.2 folds. Photoelectron spectroscopy confirms that Pb acts as an n-type dopant for Ag2 Se QDs and therefore the electronic impurities provide additional carriers to fill the traps. Moreover, the general validity of this method is demonstrated to convert different sized Ag2 Se into Pb:Ag2 Se QDs, so that a wide range of NIR-II PL with high intensity is obtained. The bright NIR-II emission of Pb:Ag2 Se QDs is further successfully performed in lymphatic system mapping.

Controlled Synthesis of Ag2 Te@Ag2 S Core-Shell Quantum Dots with Enhanced and Tunable Fluorescence in the Second Near-Infrared Window.

Fluorescence in the second near-infrared window (NIR-II, 900-1700 nm) has drawn great interest for bioimaging, owing to its high tissue penetration depth and high spatiotemporal resolution. NIR-II fluorophores with high photoluminescence quantum yield (PLQY) and stability along with high biocompatibility are urgently pursued. In this work, a Ag-rich Ag2 Te quantum dots (QDs) surface with sulfur source is successfully engineered to prepare a larger bandgap of Ag2 S shell to passivate the Ag2 Te core via a facile colloidal route, which greatly enhances the PLQY of Ag2 Te QDs and significantly improves the stability of Ag2 Te QDs. This strategy works well with different sized core Ag2 Te QDs so that the NIR-II PL can be tuned in a wide range. In vivo imaging using the as-prepared Ag2 Te@Ag2 S QDs presents much higher spatial resolution images of organs and vascular structures as compared with the same dose of Ag2 Te nanoprobes administrated, suggesting the success of the core-shell synthetic strategy and the potential biomedical applications of core-shell NIR-II nanoprobes.

In-Synthesis Se-Stabilization Enables Defect and Doping Engineering of HgTe Colloidal Quantum Dots.

Colloidal Quantum Dots (CQDs) of mercury telluride (HgTe) hold particular appeal for infrared photodetection due to their widely tunable infrared absorption and good compatibility with silicon electronics. While advances in surface chemistry have led to improved CQD solids, the chemical stability of HgTe material is not fully emphasized. In this study, it is aimed to address this issue and identifies a Se-stabilization strategy based on the surface coating of Se on HgTe CQDs via engineering in the precursor reactivity. The presence of Se-coating enables HgTe CQDs with improved colloidal stability, passivation, and enhanced degree of freedom in doping tuning. This enables the construction of optimized p-i-n HgTe CQD infrared photodetectors with an ultra-low dark current 3.26 × 10-6 A cm⁻2 at -0.4 V and room-temperature specific detectivity of 5.17 × 1011 Jones at wavelength ≈2 um, approximately one order of magnitude improvement compared to that of the control device. The stabilizing effect of Se is well preserved in the thin film state, contributing to much improved device stability. The in-synthesis Se-stabilization strategy highlights the importance of the chemical stability of materials for the construction of semiconductor-grade CQD solids and may have important implications for other high-performance CQD optoelectronic devices.

Poly(ether ether ketone) Conferred Polyolefin Separators with High Dimensional Thermal Stability for Lithium-Ion Batteries.

The traditional polyolefin separators used in lithium-ion batteries (LIBs) are plagued by limitations such as poor wetting of electrolytes and insufficient thermal stability, hindering the progress of LIBs. To overcome these limitations, we have developed a modified phase inversion technique to efficiently and durably coat polyolefin separators with poly(ether ether ketone) (PEEK). The resulting PEEK-coated polyolefin separators exhibit mechanical properties similar to those of unmodified polyolefin separators, with comparable tensile strength and modulus. Furthermore, the PEEK coating provides outstanding thermal stability, as the modified separators maintain their stability even at temperatures up to 200 °C, which is among the best results reported for polyolefin-based separators. In addition, the PEEK coating enhances ionic conductivity by more than 100% compared to polyolefin counterparts, leading to significant improvement in the electrochemical performance of prototype half cells. The modified phase inversion technique presented here offers a practical solution for coating polyolefin separators with functional polymers, paving the way for next-generation separator materials.

Enabling high-performance all-solid-state hybrid-ion batteries with a PEO-based electrolyte.

All-solid-state hybrid-ion batteries exhibiting a synergistic Na+/Li+ de/intercalation mechanism were designed and assembled, by using modified PEO-based solid polymer electrolyte, Na2V2(PO4)2O2F cathode, and Li metal anode. The batteries exhibited a high average working voltage of 3.88 V, and an energy density of 432.37 W h kg-1, providing a new avenue for the development of high-safety and low-cost secondary batteries.

Lithium-Rich Porous Aromatic Framework-Based Quasi-Solid Polymer Electrolyte for High-Performance Lithium Ion Batteries.

The development of solid polymer electrolytes (SPEs) with high ionic conductivity, wide electrochemical window, and high mechanical strength is the key factor to realize high-energy-density solid lithium ion batteries (SLIBs). Porous aromatic frameworks (PAFs) have the advantages of high porosity, easily functionalized molecular structure, and rigid stable framework, which fully meet the requirements of solid polymer electrolytes with high Li+ capacity, fast Li+ transport, and safety. Herein, a lithium-rich amidoxime (AO)-modified porous aromatic framework (PAF-170-AO) was obtained through the absorption of LiTFSI by amidoxime groups and abundant pores and then compounded with poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) to prepare a PAF-based quasi-solid polymer electrolyte (PAF-QSPE) with only tiny amounts of plasticizer (∼12 µL). The amidoxime groups of PAF-170-AO restricted the movement of the anions of LiTFSI through hydrogen bonding, which effectively promoted the dissociation and migration number of Li+ (tLi+), reduced the concentration polarization, and inhibited the growth of lithium dendrites. The PAF-QSPE exhibited a high ionic conductivity of 1.75 × 10-4 S cm-1 and tLi+ of 0.55 at room temperature. The activation energy was as low as 0.136 eV. Furthermore, the assembled SLIBs with the PAF-QSPE presented a discharge capacity of 163 mAh g-1 at 0.2 C and a capacity retention rate of 96% after 350 cycles, illustrating a stable cycling performance. This work demonstrated the great application potential of lithium-rich PAFs in QSPEs.

Au-Doped Ag2 Te Quantum Dots with Bright NIR-IIb Fluorescence for In Situ Monitoring of Angiogenesis and Arteriogenesis in a Hindlimb Ischemic Model.

Fluorescence located in 1500-1700 nm (denoted as the near-infrared IIb window, NIR-IIb) has drawn great interest for bioimaging, owing to its ultrahigh tissue penetration depth and spatiotemporal resolution. Therefore, NIR-IIb fluorescent probes with high photoluminescence quantum yield (PLQY) and stability along with high biocompatibility are urgently pursued. Herein, a novel NIR-IIb fluorescent probe of Au-doped Ag2 Te (Au:Ag2 Te) quantum dots (QDs) is developed via a facile cation exchange method. The Au dopant concentration in the Ag2 Te QDs is tunable from 0% to 10% by controlling the ratio of supplied Au precursor to Ag2 Te QDs, resulting in a wide range of PL emission in the NIR-IIb window and a much-enhanced PL intensity. After surface modification, the Au:Ag2 Te QDs possess bright NIR-IIb emission, high colloidal stability and photostability, and decent biocompatibility. Further, in vivo monitoring of the process of angiogenesis and arteriogenesis in an ischemic hindlimb is successfully performed.