Multifunctional Ion-Sensitive Floating Gate Fin Field-Effect Transistor with Three-Dimensional Nanoseaweed Structure by Glancing Angle Deposition Technology.

A multifunctional ion-sensitive floating gate Fin field-effect transistor (ISFGFinFET) for hydrogen and sodium detection is demonstrated. The ISFGFinFET comprises a FGFET and a sensing film, both of which are used to detect and improve sensitivity. The sensitivity of the ISFGFinFET can be adjusted by modulating the coupling effect of the FG. A nanoseaweed structure is fabricated via glancing angle deposition (GLAD) technology to obtain a large sensing area to enhance the sensitivity for hydrogen ion detection. A sensitivity of 266 mV per pH can be obtained using a surface area of 3.28 mm2 . In terms of sodium ion detection, a calix[4]arene sensing film to monitor sodium ions, obtaining a Na+ sensitivity of 432.7 mV per pNa, is used. In addition, the ISFGFinFET demonstrates the functionality of multiple ions detection simultaneously. The sensor arrays composed of 3 × 3 pixels are demonstrated, each of which comprise of an FGFET sensor and a transistor. Furthermore, 16 × 16 arrays with a decoder and other peripheral circuits are constructed and simulated. The performance of the proposed ISFGFinFET is competitive with that of other state-of-the-art ion sensors.

Rational Design on Polymorphous Phase Switching in Molybdenum Diselenide-Based Memristor Assisted by All-Solid-State Reversible Intercalation toward Neuromorphic Application.

In this work, a low-power memristor based on vertically stacked two-dimensional (2D) layered materials, achieved by plasma-assisted vapor reaction, as the switching material, with which the copper and gold metals as electrodes featured by reversible polymorphous phase changes from a conducting 1T-phase to a semiconducting 2H-one once copper cations interacted between vertical lamellar layers and vice versa, was demonstrated. Here, molybdenum diselenide was chosen as the switching material, and the reversible polymorphous phase changes activated by the intercalation of Cu cations were confirmed by pseudo-operando Raman scattering, transmission electron microscopy, and scanning photoelectron microscopy under high and low resistance states, respectively. The switching can be activated at about ±1 V with critical currents less than 10 µA with an on/off ratio approaching 100 after 100 cycles and low power consumption of ∼0.1 microwatt as well as linear weight updates controlled by the amount of intercalation. The work provides alternative feasibility of reversible and all-solid-state metal interactions, which benefits monolithic integrations of 2D materials into operative electronic circuits.

Ecofriendly Synthesis of Waste-Tire-Derived Graphite Nanoflakes by a Low-Temperature Electrochemical Graphitization Process toward a Silicon-Based Anode with a High-Performance Lithium-Ion Battery.

Here, the successful transformation of graphitic carbon with a high degree of graphitization and a nanoflake structure from pyrolytic tire carbon black was demonstrated. First, amorphous carbon black with a porous structure was obtained after pyrolysis and simple preacid treatments. Subsequently, the carbon black was converted into a highly graphitic structure at a relatively low temperature (850 °C) through a facile electrochemical route using molten salt, which is ecofriendly and has high potential for large-scale graphitization compared to conventional incineration techniques. Moreover, we further improved the crystallinity and uniformity of the product simultaneously by directly mixing the metal oxide catalyst Fe2O3 with a carbon precursor. The mechanism of this metal-catalyzed electrochemical graphitization has been discussed in detail. To confirm their potential in practical applications, the as-prepared graphitized nanoflakes were used as conductive additives for silicon anodes in lithium-ion batteries, which showed a performance comparable to those utilizing commercial Super-P additives, exhibiting an initial Coulombic efficiency of approximately 79.7% and a high capacity retention of approximately 45.8% after 100 cycles with a reversible capacity of 1220 mAh g-1 at a current rate of 400 mA g-1. Hence, successfully recovered waste-tire-derived carbon black utilizing a low-temperature Fe2O3-catalyzed electrochemical process opens a pathway in low-temperature graphitization toward a sustainable value-added application in the field of energy storage.

Rational Design on Controllable Cation Injection with Improved Conductive-Bridge Random Access Memory by Glancing Angle Deposition Technology toward Neuromorphic Application.

A conductive-bridge random access memory (CBRAM) has been considered a promising candidate for the next-generation nonvolatile memory technology because of its excellent performance, for which the resistive switching behavior depends on the formation/dissolution of conducting filaments in an electrolyte layer originated by the cation injection from the active electrode with electrochemical reactions. Typically, the controllability of cations into the electrolyte layer is a main issue, leading to stable switching reliability. In this work, an architecture combining spike-shaped Ag electrodes created by Al2O3 nanopillar arrays as a physical diffusion barrier by glancing angle deposition technology was proposed to localize Ag cation injection for the formation of controllable filaments inside TiOx as the switching layer. Interestingly, the dimension of the Ag plugs defined by the topography of Al2O3 nanopillar arrays can control Ag cation injection to influence the dimensionality of conductive filaments. Compared to the typical planar-Ag/TiOx/Pt device, the spiked-Ag/Al2O3 nanopillar arrays/TiOx/Pt device shows improvement of endurance and voltage disturbance. With enhanced multilevel characteristics, the spiked active-metal-based CBRAM device can be expected to serve as an analogue synapse for neuromorphic applications.