Impact of pharmaceutical excipients on in vitro association of saquinavir to chylomicrons.

This study was performed to investigate the impact of pharmaceutical excipients commonly used for lymphatic transport on in vitro drug association with chylomicrons (CM). A CM association study was conducted using saquinavir solubilized in four different pharmaceutical excipients. We observed a linear relationship between saquinavir solubility and drug association, suggesting that the solubility of saquinavir in excipients is a key determinant for successful lymphatic delivery. Broadly, these results suggest that excipients with good solubilization properties may be advantageous for enhancing lymphatic drug delivery.

The variation of volatile fatty acid compositions in sewer length, and its effect on the process design of biological nutrient removal.

The potential of enhanced biological phosphorus removal (EBPR) in biological nutrient removal (BNR) systems critically depends on the availability and types of volatile fatty acids (VFAs) in sewage. Although the characteristics of VFAs in sewage are strongly related with the biochemical transformations in the sewer system, they have not been studied thoroughly in terms of BNR process design. We have investigated the characteristics of VFAs in influent of nine sewage treatment plants which represent typical small to very large sewer systems in Korea. We found that influent total VFACOD (VFA as chemical oxygen demand) concentrations ranged from 20.4 to 65.2 mg/L. Acetic acid was a predominant VFA in sewage, and the propionic acid (HPr) portion averaged 38.7% of total VFACOD. However the sewage from longer sewer systems showed more HPr content, indicating that type of VFA varied with the total sewer length. The finding is a particularly important consideration for BNR process design since availability of HPr positively behaved to suppress the unfavorable growth of glycogen-accumulating organisms. The implication of these findings for BNR process design is discussed in this paper.

Appearance and dynamics of helical flux tubes under electron cyclotron resonance heating in the core of KSTAR plasmas.

Dual (or sometimes multiple) flux tubes (DFTs) have been observed in the core of sawtoothing KSTAR tokamak plasmas with electron cyclotron resonance heating. The time evolution of the flux tubes visualized by a 2D electron cyclotron emission imaging diagnostic typically consists of four distinctive phases: (1) growth of one flux tube out of multiple small flux tubes during the initial buildup period following a sawtooth crash, resulting in a single dominant flux tube along the m/n=1/1 helical magnetic field lines, (2) sudden rapid growth of another flux tube via a fast heat transfer from the first one, resulting in approximately identical DFTs, (3) coalescence of the two flux tubes into a single m/n=1/1 flux tube resembling the internal kink mode in the normal sawteeth, which is explained by a model of two current-carrying wires confined on a flux surface, and (4) fast localized crash of the merged flux tube similar to the standard sawtooth crash. The dynamics of the DFTs implies that the internal kink mode is not a unique prerequisite to the sawtooth crash, providing a new insight on the control of the sawtooth.

Suppression of edge localized modes in high-confinement KSTAR plasmas by nonaxisymmetric magnetic perturbations.

Edge localized modes (ELMs) in high-confinement mode plasmas were completely suppressed in KSTAR by applying n=1 nonaxisymmetric magnetic perturbations. Initially, the ELMs were intensified with a reduction of frequency, but completely suppressed later. The electron density had an initial 10% decrease followed by a gradual increase as ELMs were suppressed. Interesting phenomena such as a saturated evolution of edge T(e) and broadband changes of magnetic fluctuations were observed, suggesting the change of edge transport by the applied magnetic perturbations.

Effects of electron-cyclotron-resonance-heating-induced internal kink mode on the toroidal rotation in the KSTAR Tokamak.

It is observed that the magnitude of the toroidal rotation speed is reduced by the central electron cyclotron resonance heating (ECRH) regardless of the direction of the toroidal rotation. The magnetohydrodynamics activities generally appear with the rotation change due to ECRH. It is shown that the internal kink mode is induced by the central ECRH and breaks the toroidal symmetry. When the magnetohydrodynamics activities are present, the toroidal plasma viscosity is not negligible. The observed effects of ECRH on the toroidal plasma rotation are explained by the neoclassical toroidal viscosity in this Letter. It is found that the neoclassical toroidal viscosity torque caused by the internal kink mode damps the toroidal rotation.

Two-dimensional visualization of growth and burst of the edge-localized filaments in KSTAR H-mode plasmas.

The filamentary nature and dynamics of edge-localized modes (ELMs) in the KSTAR high-confinement mode plasmas have been visualized in 2D via electron cyclotron emission imaging. The ELM filaments rotating with a net poloidal velocity are observed to evolve in three distinctive stages: initial linear growth, interim quasisteady state, and final crash. The crash is initiated by a narrow fingerlike perturbation growing radially from a poloidally elongated filament. The filament bursts through this finger, leading to fast and collective heat convection from the edge region into the scrape-off layer, i.e., ELM crash.

Preparation and stability of gold colloid by electrical explosion of wire in various media.

Gold colloids were prepared by electrical explosion of wire in various media: cold water (0 degrees C), room temperature water (25 degrees C), hot water (80 degrees C), 0.01 M polysorbate surfactant 20 (TW 20) solution, mixture of 0.01 M TW 20 and 0.01 M ascorbic acid. The size distribution of nanoparticles measured by transmission electron microscope was found to shift to a smaller size with a decrease of temperature and a presence of TW 20 surfactant. The multiple light scattering results showed that medium temperature and ambient medium of explosion process is much influence on the stability of colloid. The gold colloid prepared in cold water is unstable in comparison with one prepared in warm and hot water. The best stability of gold colloid obtained with explosion medium of TW 20 and ascorbic acid solution.

Effect of synthetic temperature on the dispersion stability of gold nanocolloid produced via electrical explosion of wire.

In this study, gold nanocolloid was produced via the electrical explosion of wire in water, for the purpose of medical treatment. Thus, the use of other additives was avoided to stabilize the gold nanocolloid. The temperature of the water that was to be used for explosion was changed, and its effect on the stability of the gold nanocolloid was investigated. The synthetic temperature was varied from ice temperature to 80 degrees C. The morphology and particle size were studied using a transmission electron microscope. The UV-Vis spectra confirmed the formation of gold nanoparticles in the water. The stability of the gold nanocolloid was estimated using the zeta-potential and Turbiscan methods. The results showed that the synthetic temperature affected the stability of the gold nanocolloid. The TEM images of the gold nanoparticles prepared at low temperatures (0 and 20 degrees C) have several big particles. But, when the synthetic temperature was increased to 80 degrees C, most of the nanoparticles formed a spherical shape, without neck connection. Better stability was obtained in the gold nanocolloid sample prepared at a higher temperature. The gold nanocolloid that was synthesized at 80 degrees C was stable for more than three months, with small sedimentation.

A machine learning approach to identify the universality of solitary perturbations accompanying boundary bursts in magnetized toroidal plasmas.

Experimental observations assisted by 2-D imaging diagnostics on the KSTAR tokamak show that a solitary perturbation (SP) emerges prior to a boundary burst of magnetized toroidal plasmas, which puts forward SP as a potential candidate for the burst trigger. We have constructed a machine learning (ML) model based on a convolutional deep neural network architecture for a statistical study to identify the SP as a boundary burst trigger. The ML model takes sequential signals detected from 19 toroidal Mirnov coils as input and predicts whether each temporal frame corresponds to an SP. We trained the network in a supervised manner on a training set consisting of real signals with manually annotated SP locations and synthetic burst signals. The trained model achieves high performances in various metrics on a test data set. We also demonstrated the reliability of the model by visualizing the discriminative parts of the input signals that the model recognizes. Finally, we applied the trained model to new data from KSTAR experiments, which were never seen during training, and confirmed that the large burst at the plasma boundary that can fatally damage the fusion device always involves the emergence of SP. This result suggests that the SP is a key to understanding and controlling of the boundary burst in magnetized toroidal plasmas.

Feasibility of diffusion and probabilistic white matter analysis in patients implanted with a deep brain stimulator.

Deep brain stimulation (DBS) for Parkinson's disease (PD) is an established advanced therapy that produces therapeutic effects through high frequency stimulation. Although this therapeutic option leads to improved clinical outcomes, the mechanisms of the underlying efficacy of this treatment are not well understood. Therefore, investigation of DBS and its postoperative effects on brain architecture is of great interest. Diffusion weighted imaging (DWI) is an advanced imaging technique, which has the ability to estimate the structure of white matter fibers; however, clinical application of DWI after DBS implantation is challenging due to the strong susceptibility artifacts caused by implanted devices. This study aims to evaluate the feasibility of generating meaningful white matter reconstructions after DBS implantation; and to subsequently quantify the degree to which these tracts are affected by post-operative device-related artifacts. DWI was safely performed before and after implanting electrodes for DBS in 9 PD patients. Differences within each subject between pre- and post-implantation FA, MD, and RD values for 123 regions of interest (ROIs) were calculated. While differences were noted globally, they were larger in regions directly affected by the artifact. White matter tracts were generated from each ROI with probabilistic tractography, revealing significant differences in the reconstruction of several white matter structures after DBS. Tracts pertinent to PD, such as regions of the substantia nigra and nigrostriatal tracts, were largely unaffected. The aim of this study was to demonstrate the feasibility and clinical applicability of acquiring and processing DWI post-operatively in PD patients after DBS implantation. The presence of global differences provides an impetus for acquiring DWI shortly after implantation to establish a new baseline against which longitudinal changes in brain connectivity in DBS patients can be compared. Understanding that post-operative fiber tracking in patients is feasible on a clinically-relevant scale has significant implications for increasing our current understanding of the pathophysiology of movement disorders, and may provide insights into better defining the pathophysiology and therapeutic effects of DBS.

Solitary perturbations in the steep boundary of magnetized toroidal plasma.

Solitary perturbations (SPs) localized both poloidally and radially are detected within ~100 µs before the partial collapse of the high pressure gradient boundary region (called pedestal) of magnetized toroidal plasma in the KSTAR tokamak device. The SP develops with a low toroidal mode number (typically unity) in the pedestal ingrained with quasi-stable edge-localized mode (QSM) which commonly appears during the inter-collapse period. The SPs have smaller mode pitch and different (often opposite) rotation velocity compared to the QSMs. Similar solitary perturbations are also frequently observed before the onset of complete pedestal collapse, suggesting a strong connection between the SP generation and the pedestal collapse.

Post calibration of the two-dimensional electron cyclotron emission imaging instrument with electron temperature characteristics of the magnetohydrodynamic instabilities.

The electron cyclotron emission imaging (ECEI) instrument is widely used to study the local electron temperature (Te) fluctuations by measuring the ECE intensity IECE ∝ Te in tokamak plasmas. The ECEI measurement is often processed in a normalized fluctuation quantity against the time averaged value due to complication in absolute calibration. In this paper, the ECEI channels are relatively calibrated using the flat Te assumption of the sawtooth crash or the tearing mode island and a proper extrapolation. The 2-D relatively calibrated electron temperature (Te,rel) images are reconstructed and the displacement amplitude of the magnetohydrodynamic modes can be measured for the accurate quantitative growth analysis.

Compact ECEI system with in-vessel reflective optics for WEST.

An electron cyclotron emission imaging (ECEI) diagnostic system for WEST (W Environment for Steady state Tokamak) is under development to study the MHD instabilities affected by tungsten impurities. The system will provide 2-D Te fluctuation images (width × height = ∼18 cm × âˆ¼ 34 cm at low field side and ∼13 cm × âˆ¼ 39 cm at high field side) from a poloidal cross section with high spatial (≤1.7 cm) and temporal (≤2 µs) resolutions. While the key concept and electronic structure are similar to that of prior ECEI systems on other tokamak devices such as KSTAR, DIII-D, or ASDEX-U, part of the imaging optics have to be placed inside the vacuum vessel in order to resolve issues on limited installation space and longer beam path to the detector position. The in-vessel optics consisting of two large curvature-radius mirrors are expected to withstand the extreme heating on long-pulse operation scenario (∼1000 s). The out-vessel optical housing is constructed as compact as possible to remove easily from the installation site in case of necessity. Commissioning of the system is scheduled on the second experimental WEST campaign end of 2017.

Ion gyroscale fluctuation measurement with microwave imaging reflectometer on KSTAR.

Ion gyroscale turbulent fluctuations with the poloidal wavenumber kθ ∼ 3 cm-1 have been measured in the core region of the neutral beam (NB) injected low confinement (L-mode) plasmas on Korea superconducting tokamak advanced research. The turbulence poloidal wavenumbers are deduced from the frequencies and poloidal rotation velocities in the laboratory frame, measured by the multichannel microwave imaging reflectometer. Linear and nonlinear gyrokinetic simulations also predict the unstable modes with the normalized wavenumber kθρs ∼ 0.4, consistent with the measurement. Comparison of the measured frequencies with the intrinsic mode frequencies from the linear simulations indicates that the measured ones are primarily due to the E × B flow velocity in the NB-injected fast rotating plasmas.

New compact and efficient local oscillator optic system for the KSTAR electron cyclotron emission imaging system.

Electron cyclotron emission imaging (ECEI) diagnostic on Korean Superconducting Tokamak Advanced Research utilizes quasi-optical heterodyne-detection method to measure 2D (vertical and radial) Te fluctuations from two toroidally separated poloidal cross section of the plasma. A cylindrical lens local oscillator (LO) optics with optical path length (OPL) 2-2.5 m has been used in the current ECEI system to couple the LO source to the 24 vertically aligned array of ECE detectors. For efficient and compact LO optics employing the Powell lens is proposed so that the OPL of the LO source is significantly reduced from ∼2.0 m to 0.4 m with new optics. The coupling efficiency of the LO source is expected to be improved especially at the edge channels. Results from the optical simulation together with the laboratory test of the prototype optics will be discussed in this paper.

The rabbit renotropic system.

Elevated levels of a specific renal growth factor, renotropin, have been associated with spontaneous hypertension. To examine this association more closely, we have undertaken the development of a better assay system to characterize and purify renotropin. Sera from rabbits prior to operation (control) and at a specified time after unilateral nephrectomy (uni) were examined for renotropic activity. Comparing the effects of uni to control sera in the same rabbit, significant stimulation of 3H-thymidine incorporation into the DNA of primary rabbit kidney cultures incubated in D-valine medium to eliminate fibroblast growth was noted: at 3 days postoperatively 73% (n = 13), at 7 days 103% (n = 39), at 10 days 130% (n = 31), at 21 days 101% (n = 24), at 42 days 89% (n = 13). All values were at least P less than 0.01. The stimulatory properties were dose-dependent but reached a plateau at high serum concentrations. Comparing CPM/mg protein in uni/control in different concentrations of sera 7 days postoperatively, uni versus control were 67/44 at 5% v/v, 139/72 at 10% v/v, 261/161 at 20% v/v, and 243/136 at 40% v/v. The renotropic effect of uni sera remained after dialysis in incubation medium and after sera were heated in boiling water for 5 minutes. Renal extracts obtained from growing kidneys 7 days postnephrectomy augmented renotropic activity. Atrial natriuretic factor, ouabain, PGF2 alpha, PGE1, and cAMP did not possess renotropic activity. We conclude that the primary rabbit kidney culture assay for renotropin is highly sensitive and will be an important tool to comprehend the role of renotropin in the pathogenesis of hypertension.

Renotropic stimulation in rat kidney cell culture.

A circulating renotropic factor specific for renal cells has been described in rats. The addition of sera obtained from unilaterally nephrectomized (uni) rats 24h after operation compared to sham-operated (sham) rats augments 3H-thymidine incorporation into the DNA of incubating kidney slices approximately 10%-30%. Attempting to amplify the sensitivity of the assay for this renotropic agent, we replaced slices with primary rat kidney cultures. The assay system was based on one previously used for rabbits. The cultured cells were synchronized in their growth phase by a period of protein-free starvation. Compared to sera from sham rats, sera from uni rats showed significant stimulation of thymidine incorporation into DNA, 35.5% +/- 9.3 (SEM), p less than .0001, at 16 h; 63.3% +/- 10.0 (SEM), p less than .001, at 24 h; and 19.5% +/- 6.5 (SEM), p less than .01, at 48 h post operation. Accordingly, the maximal stimulation at 24 h was greater than that previously found using the kidney slice assay. Measurable renotropic activity occurred earlier and over a shorter duration than in rabbits. Stimulation was similar when a D-valine medium, relatively specific for renal epithelial cells, replaced DME medium. We conclude that growth synchronized, primary rat renal cells in culture verify the presence of a circulating renotropin arising 24 h post uni.

Turmeric (Curcuma longa) and curcumin inhibit the growth of Helicobacter pylori, a group 1 carcinogen.

BACKGROUND: Curcumin, a polyphenolic chemical constituent derived from turmeric (Curcuma longa), has been shown to prevent gastric and colon cancers in rodents. Many mechanisms have been proposed for the chemopreventative effects, although the effect of curcumin on the growth of Helicobacter pylori has not been reported. H. pylori is a Group 1 carcinogen and is associated with the development of gastric and colon cancer. MATERIALS AND METHODS: A methanol extract of the dried powdered turmeric rhizome and curcumin were tested against 19 strains of H. pylori, including 5 cagA+ strains. RESULTS: Both the methanol extract and curcumin inhibited the growth of all strains of H. pylori in vitro with a minimum inhibitory concentration range of 6.25-50 micrograms/ml. CONCLUSION: These data demonstrate that curcumin inhibits the growth of H. pylori cagA+ strains in vitro, and this may be one of the mechanisms by which curcumin exerts its chemopreventative effects.

Determination of palladium by flame atomic absorption spectrometry combined on-line with flow injection preconcentration using a micro-column packed with activated carbon fibre.

The versatility of flow injection as a procedure for enhancing the performance of atomic spectrometry is demonstrated by the on-line separation and preconcentration of analyte ions of interest for methods employing atomic spectrometric measurements. In this paper, a sensitive method for the determination of palladium by flame atomic absorption spectrometry associated on-line with the flow injection technique has been developed. A flow system comprising a micro-column packed with activated carbon fibre was used for the concentration of palladium. In order to further enhance the performance of the analysis a new manifold with an additional column has been designed to increase the sensitivity by doubling the analytical signals. The method is sensitive and easily operating with a sampling rate of 15-20/h. The detection limit of this method is 0.3 ng/ml in standard solution and the precision is 3.9% relative standard deviation at 50 ng/ml. Recoveries of palladium in spiked solutions are 103-107%.