Emission Profiles of Volatiles during 3D Printing with ABS, ASA, Nylon, and PETG Polymer Filaments.

In this short communication we characterize the emission of volatile organic compounds (VOCs) from fused filament fabrication (FFF) 3D printing using four polymer materials, namely polyethylene terephthalate glycol-modified (PETG), acrylonitrile styrene acrylate (ASA), Nylon, and acrylonitrile butadiene styrene (ABS). Detailed emission profiles are obtained during thermal degradation of the polymers as a function of temperature and also in real-time during 3D printing. Direct quantitative measurement was performed using proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS). Qualitative determination of the volatiles emitted from the printed elements at various temperatures was accomplished using gas chromatography-mass spectrometry (GC-MS). The emission rates of VOCs differ significantly between the different polymer filaments, with the emission from Nylon and PETG more than an order of magnitude lower than that of ABS.

Monitoring the BTEX Volatiles during 3D Printing with Acrylonitrile Butadiene Styrene (ABS) Using Electronic Nose and Proton Transfer Reaction Mass Spectrometry.

We describe a concept study in which the changes of concentration of benzene, toluene, ethylbenzene, and xylene (BTEX) compounds and styrene within a 3D printer enclosure during printing with different acrylonitrile butadiene styrene (ABS) filaments were monitored in real-time using a proton transfer reaction mass spectrometer and an electronic nose. The quantitative data on the concentration of the BTEX compounds, in particular the concentration of carcinogenic benzene, were then used as reference values for assessing the applicability of an array of low-cost electrochemical sensors in monitoring the exposure of the users of consumer-grade fused deposition modelling 3D printers to potentially harmful volatiles. Using multivariate statistical analysis and machine learning, it was possible to determine whether a set threshold limit value for the concentration of BTEX was exceeded with a 0.96 classification accuracy and within a timeframe of 5 min based on the responses of the chemical sensors.

Investigation of the Dynamism of Nanosized SOA Particle Formation in Indoor Air by a Scanning Mobility Particle Sizer and Proton-Transfer-Reaction Mass Spectrometry.

Terpenes are VOCs of particular importance, since they are emitted from a wide range of indoor sources and are considered to be precursors of Secondary Organic Aerosol (SOA) formation. It has been proven that SOA particles, especially nanosized ones, pose a threat to human health. In this research, experiments with the application of an environmental chamber and real-time measurement techniques were carried out to investigate in a complimentary way the formation of monoterpene oxidation products and nanosized SOA particles initiated by monoterpene ozonolysis. Proton-Transfer-Reaction Mass Spectrometry with a Time-Of-Flight analyzer (PTR-TOF-MS) and a Scanning Mobility Particle Sizer (SMPS) were applied to determine in real time the dynamism of the formation of the corresponding terpene ozonolysis products and submicron SOA particles. Results proved that firstly, oxidation products were formed, and then, they underwent nucleation and condensation, forming particles whose diameters grew with time. The oxidation products formed were different depending on the type of terpenes applied. The comparison of the results obtained during the experiments with gaseous standard mixtures and real samples commonly present and used in indoor air revealed that the diversified chemical composition of the emission source had implications for both the particle formation initiated by the oxidation of essential oil components and the chemical reactions occurring via the oxidation process. With the instrumentation utilized, the concentration changes at the level of a few ppbv could be monitored.

The effect of anthropogenic activity on BTEX, NO2, SO2, and CO concentrations in urban air of the spa city of Sopot and medium-industrialized city of Tczew located in North Poland.

The major goal of the present study is to compare the air quality of two urban locations situated in Northern Poland - the spa City of Sopot and the medium-industrialized city of Tczew using chemometric methods. As a criterion for the assessment of atmospheric air quality, measurements of benzene, toluene, ethylbenzene and total xylenes were used (collected from atmospheric air using diffusion-type passive samplers) as well as measurements of inorganic compounds - CO, NO2 and SO2, which were subject to routine control and determined by means of automatic analysers. Studies related to determination of defined chemical compounds in the urban air in the monitored area were performed from January 2013 to December 2014. By interpreting the results obtained and using basic multivariate statistical tools (cluster analysis and principal components analysis), major sources of emissions of determined pollutants in the air in urbanized areas were defined. The study also shows the potential influence of the sea breeze on concentrations of chemical compounds in the atmospheric air in the spa city of Sopot.

The home-made in situ passive flux sampler for the measurement of monoterpene emission flux: preliminary studies.

The paper presents the construction and metrological characteristics of the home-made in situ passive flux sampler, an analytical tool representing small-scale emission chambers working in situ and passively sampling analytes from the gaseous phase. The sorption element was a cylindrical container made of stainless steel net, packed with a carbon sorbent bed-graphitized charcoal, Carbograph 4 (35/50 mesh). The recommended working/exposure time of the constructed passive device was determined by carrying out model tests in the laboratory. In addition, a preliminary study was conducted to determine the rate of the emission flux of selected monoterpenes released from the surface of wood-based indoor materials (laminated chipboard) used in residential areas.

Investigation of RH effect on uncommon limonene ozonolysis products and SOA formation in indoor air with real time measurement techniques.

Scientific interest in SOA influence on indoor air quality increases since last 20 years. It is well known, that particles of nano-sized diameter pose a threat for human health causing, among others: eye, upper airway irritation, inflammatory response in cells, worsening asthma, hypertension, diabetes, and central nervous dysfunction. Terpenes are reactive VOCs, commonly emitted in indoor air and considered to be SOA precursors by oxidation reactions. The aim of this study was to investigate the relative humidity influence on i) formation of limonene ozonolysis products and ii) SOA formation process - especially the first steps of it. We managed to determine 4 uncommon limonene ozonolysis products (m/z: 43, 83, 99 and 110) appearing in the PTR-TOF-MS mass spectra with the same frequency as well-known formaldehyde, acetone, acetic acid and formic acid. We also detected m/z 75 and m/z 115 formed under dry conditions and m/z 111 and m/z 125 formed under humid conditions. Detected masses formula is proposed with probability >70 % and the probability is derived from the deviation of the exact mass to the measured one and the isotope distribution. SMPS data analysis allowed us to conclude that RH around 40% increases particle mass concentration, regardless initial limonene concentration. Unfortunately, conclusions about RH influence on particle number concentration are inconsistent. Under low initial terpene concentration, RH around 40% decreases particle number concentration. However, for high initial limonene concentration, RH around 40% caused increase in particle number concentration. Obtained results allowed to conclude, that i) RH influences both particle number and particle mass concentration, ii) initial substrate concentration influences SOA formation altering the RH effect, iii) comparison of results and drawing conclusions is difficult due to different experimental protocols in the literature and due to the number of factors influencing SOA formation initiated by terpene oxidation.

Evaluation of the yield, chemical composition and biological properties of essential oil from bioreactor-grown cultures of Salvia apiana microshoots.

Microshoot cultures of the North American endemic Salvia apiana were established for the first time and evaluated for essential oil production. Stationary cultures, grown on Schenk-Hildebrandt (SH) medium, supplemented with 0.22 mg/L thidiazuron (TDZ), 2.0 mg/L 6-benzylaminopurine and 3.0% (w/v) sucrose, accumulated 1.27% (v/m dry weight) essential oil, consisting mostly of 1,8-cineole, ß-pinene, α-pinene, ß-myrcene and camphor. The microshoots were adapted to agitated culture, showing biomass yields up to ca. 19 g/L. Scale-up studies demonstrated that S. spiana microshoots grow well in temporary immersion systems (TIS). In the RITA bioreactor, up to 19.27 g/L dry biomass was obtained, containing 1.1% oil with up to ca. 42% cineole content. The other systems employed, i.e. Plantform (TIS) and a custom made spray bioreactor (SGB), yielded ca. 18 and 19 g/L dry weight, respectively. The essential oil content of Plantform and SGB-grown microshoots was comparable to RITA bioreactor, however, the content of cineole was substantially higher (ca. 55%). Oil samples isolated from in vitro material proved to be active in acetylcholinesterase (up to 60.0% inhibition recorded for Plantform-grown microshoots), as well as hyaluronidase and tyrosinase-inhibitory assays (up to 45.8 and 64.5% inhibition observed in the case of the SGB culture).

Measurement of benzene concentration in urban air using passive sampling.

The concentration of benzene in urban air in the Tri-City area of Poland (Gdansk-Sopot-Gdynia, and Tczew) was assessed using diffusive passive samplers (Radiello). Samples were collected during a four-year monitoring campaign (2007-2010) at selected monitoring stations managed by the Agency of Regional Air Quality Monitoring in the Gdansk Metropolitan Area (ARMAAG) Foundation. The performance of the passive samplers was investigated in a field study that measured the benzene concentration in urban air. The results obtained by the Radiello samplers were compared with the results obtained using an on-line monitor (Chrompack CP 7001). Statistical analysis of the results obtained by the two different techniques (passive and on-line) was performed by a linear regression method (Student's t-test). The influence of temperature fluctuations on the uptake rate behavior of the passive samplers was also investigated.

Chemical Composition of Atmospheric Air in Nemoral Scots Pine Forests and Submountainous Beech Forests: The Potential Region for the Introduction of Forest Therapy.

Studies show that forests are one of the main recreational destinations. This can be explained by their beneficial effects on the health of their visitors, which can be attributed to compounds from the terpene group. The aim of this research was to determine the chemical composition of air in the interiors of Nemoral Scots pine forests and submountainous beech forests, with the determination of compounds of the terpene group. Samples of organic compounds present in the air were collected with the use of Tenax TA sorbent tubes. The process of separation, identification, and determination of the extracted organic compounds was carried out with the use of the gas chromatography technique integrated with a flame ionization detector. Additional identification of the extracted compounds was carried out with the use of GC coupled with mass spectrometry. The most abundant group of compounds was the aliphatic hydrocarbons, both saturated (linear and branched) and unsaturated (terpenes). Carbonyl compounds were also found in the collected samples, but they constituted no more than 10% of all compounds present on the chromatograms. The concentrations of terpenes and terpenoids in the forest atmosphere varied from 10 to 74 µg·m-3, representing on average 33% of the total volatile organic compounds.

Real-time monitoring of the emission of volatile organic compounds from polylactide 3D printing filaments.

Establishing the emission profile of volatile organic compounds generated during fused deposition modeling 3D printing using polymer filaments is important in terms of both understanding the processes taking place during thermal degradation of thermoplastics, and assessing the user's exposure to potentially harmful volatiles. However, obtaining detailed, real-time qualitative and quantitative results poses a challenge. In this paper solid-phase microextraction-gas chromatography-time-of-flight mass spectrometry and proton transfer reaction time-of-flight mass spectrometry were used to identify and monitor the emission of volatiles during thermal degradation of polylactide filaments and during 3D printing. Filaments of two different grades and three colours were used. It was possible to obtain detailed, time- and temperature-resolved emission profiles of the main products of thermal decomposition of lactide and polylactide 3D printing filaments at concentration levels of a few µg/g. This revealed different temperature-dependent emission characteristics of particular volatiles, such as, among others, lactide, acetaldehyde, acetic acid, and 2-butanone between various polylactide 3D printing filaments. This approach can be used to monitor the emission associated with printing with various other types of polymer 3D printing materials.

Recent advances on SOA formation in indoor air, fate and strategies for SOA characterization in indoor air - A review.

Recent studies proves that indoor air chemistry differs in many aspects from atmospheric one. People send up to 90 % of their life indoors being exposed to pollutants present in gas, particle and solid phase. Particle phase indoor is composed of particles emitted from various sources, among which there is an indoor source - secondary chemical reactions leading to formation of secondary organic aerosol (SOA). Lately, researchers' attentions turned towards the ultrafine particles, for there are still a lot of gaps in knowledge concerning this field of study, while there is evidence of negative influence of ultrafine particles on human health. Presented review sums up current knowledge about secondary particle formation in indoor environment and development of analytical techniques applied to study those processes. The biggest concern today is studying ROS, for their lifetime in indoor air is very short due to reactions at the very beginning of terpene oxidation process. Another interesting aspect that is recently discovered is monoterpene autooxidation process that leads to HOMs formation that in turn can influence SOA formation yield. A complex studies covering gas phase and particle phase characterization, but also toxicological studies are crucial to fully understand indoor air chemistry leading to ultrafine particle formation.

The influence of Nigella sativa essential oil on proliferation, activation, and apoptosis of human T lymphocytes in vitro.

In previous work, we tested the immunomodulatory effect of Nigella sativa (NS) fatty oil. Our results demonstrated that unrefined, obtained by cold pressing black cumin seed oil inhibited lymphocytes' proliferation and induced their apoptosis in a dose-dependent manner. In this study, we examined the immunomodulatory properties of essential oil (EO) obtained from the NS seeds by hydrodistillation and its two main constituents: thymoquinone (TQ) and p-cymene. We analyzed the proliferation, activation phenotype, and apoptosis rates of human T lymphocytes stimulated with an immobilized monoclonal anti-CD3 antibody in the presence of serial ethanol dilutions of tested oil or serial distilled water dilutions of tested compounds with flow cytometry. Our results showed that NSEO significantly inhibited the proliferation of CD4+ and CD8+ T lymphocytes, induced cell death in a dose-dependent manner, and reduced the expression of CD28 and CD25 antigens essential for lymphocyte activation. TQ inhibited the proliferation of T lymphocytes and induced cell death, particularly in high concentrations. Meanwhile, p-cymene did not influence lymphocyte proliferation. However, its high concentration induced cell necrosis. These results show that the essential oil from Nigella sativa has powerful immunomodulatory properties, which, at least partially, are related to the TQ component.

Solventless sample preparation techniques based on solid- and vapour-phase extraction.

The main objective of this review is to critically evaluate recent developments in solventless sample preparation techniques. The potential of a variety of sample preparation techniques based on solid- and vapour-phase extraction techniques is evaluated. Direct thermal extraction and derivatization processes to facilitate the extraction of analytes in different areas are included. The applicability, disadvantages and advantages of each sample preparation technique for the determination of environmental contaminants in different matrices are discussed.

Monitoring and analytics of semivolatile organic compounds (SVOCs) in indoor air.

This paper reviews literature information on the behaviour of semivolatile organic compounds (SVOCs) in the indoor environment, as well as the most likely emission sources. The consecutive stages of analytical procedures used for monitoring SVOCs in indoor environments are described. The most common approaches used for collecting samples from the gas and particulate phases are mentioned. The paper discusses and compares various types of sorbents and filters applied in dynamic, passive and denudational techniques, as well as the techniques used to liberate the SVOCs, including Soxhlet, sonication and microwave extraction. The main advantages and disadvantages of each technique are discussed, together with possible future trends. The approaches commonly used during the final determination step, such as gas chromatography and liquid chromatography, are presented together with their possible drawbacks, and ways of eliminating them are suggested. The review makes brief reference to the effects of human exposure to SVOCs in house dust and discusses the main aspects of the analytical procedures used to monitor the presence of SVOCs in this medium.

Investigation on air quality of specific indoor environments-spa salons located in Gdynia, Poland.

Due to excessive application of essential oils and scented products in spa salons during aromatherapy and massage sessions, the elevated concentration of total volatile organic compounds (TVOCs), particularly terpenes, which are known as secondary organic aerosol (SOA) precursors, is expected there. This study was aimed at determination of VOCs with a particular regard to terpenes in air samples collected in selected spa salons located in Northern Poland. Active air sampling was conducted before and after treatments. Samples were analyzed with the use of thermal desorption gas chromatography coupled with flame-ionization detector (TD-GC-FID) and mass spectrometer (TD-GC-MS). Obtained results allowed to characterize chemical composition of indoor air of spa salons and also to relate the dependence between applied essential oil and indoor air chemical composition. It has been proved that (i) spa salons are characterized by TVOC concentrations exceeding recommended values of 300-400 µg m-3 in most of examined cases, reaching up to several thousand of micrograms per cubic meter, (ii) TVOC concentration is strictly related to salon characteristics and carried out treatments, (iii) terpenes constitute a significant part of TVOCs present in spa indoor air, from 22 up to 86%, (iv) most commonly investigated terpenes in the literature (D-limonene, α-pinene, camphene, and linalool) were also determined at the highest concentration levels in this study and (v) VOC chemical composition is strictly dependent on the type of applied essential oils. On the basis of obtained results, it may be stated that extensive application of essential oils rich in terpenes can significantly alter indoor air chemistry of spa salons, thereby influencing health and well-being of employees working there. Graphical abstract.

Passive sampling as a tool for obtaining reliable analytical information in environmental quality monitoring.

Passive sampling technology has been developing very quickly for the past 20 years, and is widely used for monitoring pollutants in different environments, for example air, water, and soil. It has many significant advantages, including simplicity, low cost, no need for expensive and complicated equipment, no power requirements, unattended operation, and the ability to produce accurate results. The present generation of passive samplers enables detection and analysis of bioavailable pollutants at low and very low concentrations and investigation of the environmental concentration of organic and inorganic pollutants not only on the local scale but also on continental and global scales. This review describes the current application of passive sampling techniques in environmental analysis and monitoring, under both equilibrium and non-equilibrium conditions.

Spatial and seasonal patterns of benzene, toluene, ethylbenzene, and xylenes in the Gdansk, Poland and surrounding areas determined using radiello passive samplers.

Atmospheric concentrations of benzene, toluene, ethylbenzene, and xylenes (BTEX) were assessed in the Gdansk-Sopot-Gdynia Tricity area and in the city of Tczew using diffusive-type Radiello passive samplers. Samples were collected at the monitoring stations belonging to the Agency of Regional Air Quality Monitoring Foundation. The results indicated that the BTEX concentrations measured in the urban air in the Tricity area and in Tczew were dependent on the season, being somewhat higher in winter and spring than in summer. Maps of BTEX pollution in the Tricity and in Tczew were prepared by interpolating the results for the areas between the sampling points covering the mapped areas. This allowed the assessment of time-weighted average concentrations of the compounds studied at locations where measurements were not made.

Sample preparation for gas chromatographic determination of halogenated volatile organic compounds in environmental and biological samples.

In this review, the wide spectrum of the techniques of isolation and/or preconcentration and final determination of halogenated volatile organic compounds (HVOCs) in water, air, soil, sediment and biological fluids are presented and discussed. The techniques discussed are solvent microextraction, solid phase extraction, gas extraction (static and dynamic techniques), membrane processes and passive sampling. Also, direct techniques, such as direct aqueous injection into gas chromatography (GC) column and membrane inlet mass spectrometry, are presented. Main attention is paid to the practical application of these techniques during all HVOCs determination.

Matrix solid-phase dispersion (MSPD) as simple and useful sample preparation technique for determination of polybrominated diphenyl ethers (PBDEs) in dust.

In the present study a novel analytical procedure for the determination of polybrominated diphenyl ethers in dust samples was developed. The main aim of the research was the selection of the optimum conditions of the matrix solid-phase dispersion before the final determination of polybrominated diphenyl ethers in dust samples. In order to assess the best usefulness of this technique, a favourable ratio of sample amount to the mass of dispersing sorbent, as well as the type of this sorbent used has been tested. The type of sorbent responsible for additional purification (clean-up sorbent) of the extract during matrix solid-phase dispersion was also selected. Gas chromatography coupled with mass spectrometry will be used at the final determination step. Preliminary results indicate that the use of matrix solid-phase dispersion can be a promising alternative to other time-consuming and multi-stage analytical procedures. The proposed method provided satisfactory recoveries (76-119%) and limits of detection: 2.1-4.4 pg µL-1 for tri-heptaBDE in linear range of 5-100 pg µL-1; 480 pg µL-1 for decaBDE in linear range of 500-2000 pg µL-1 from only 0.05 g of a dust sample. Finally, the method was applied to study the content of selected polybrominated diphenyl ethers in real dust samples. Some polybrominated diphenyl ether congeners reached up to (16.3 ±â€¯3.0)·102 ng g-1.

Chemical variability of Rhododendron tomentosum (Ledum palustre) essential oils and their pro-apoptotic effect on lymphocytes and rheumatoid arthritis synoviocytes.

Rhododendron tomentosum (Ledum palustre) is an aromatic plant traditionally used for alleviating rheumatic complaints which makes it a potential candidate for a natural drug in rheumatoid arthritis (RA) treatment. However, the effects of plants' volatiles on apoptosis of synovial fibroblasts and infiltrating leucocytes of RA synovia, have not been reported. Volatile fraction of R. tomentosum is chemically variable and chemotypes of the plants need to be defined if the oil is to be used for therapeutic purposes. In the presented work, cluster analysis of literature data enabled to define 10 chemotypes of the plant. The volatile fractions of known composition were then tested for bioactivity using a RA-specific in vitro models. Essential oils of two wild types (γ-terpineol and palustrol/ledol type) and one in vitro chemotype (ledene oxide type) were obtained by hydrodistillation and their bioactivity was tested in two in vitro models: I - peripheral blood lymphocytes of healthy volunteers and II - synoviocytes and immune cells isolated from synovia of RA patients. The influence of oils on blood lymphocytes' proliferation and apoptosis rates of synovia-derived cells was determined by flow cytometry. Dose-dependent inhibitory effect of the serial dilutions of R. tomentosum oils on proliferation rates of blood lymphocytes was found. At 1:400 dilutions, all the tested oils increased the number of necrotic cells in synovial fibroblasts from RA synovia. Additionally, increased proportions of late apoptotic cells were observed in leucocyte populations subjected to oils at 1:400 dilution.