RESUMO
Hydrogels from self-assembling ionic complementary peptides have been receiving much interest from the scientific community as mimetics of the extracellular matrix that can offer three-dimensional support for cell growth or become vehicles for the delivery of stem cells or drugs. These scaffolds have also been proposed as bone substitutes for small defects as they promote beneficial effects on human osteoblasts. In order to develop a novel bioactive titanium implant, we propose the introduction of a layer of ionic-complementary self-assembling peptides (EAbuK) on Ti whose surface has been previously sandblasted and acid etched. The peptide layer is anchored to the metal by covalent functionalization of titania with self-assembling sequences. The peptide layer has also been enriched by the insulin-like growth factor-1 incorporated to the layer and/or a conjugate obtained by chemoselective ligation between EAbuK and a sequence of 25 residues containing four GRGDSP motifs per chain. X-ray photoelectron spectroscopy studies confirmed a change in the surface composition in agreement with the proposed decorations. An evaluation of the contact angle showed a substantial change in wettability induced by the peptide layer. The human osteoblast adhesion and proliferation assays showed an increase in adhesion for the surfaces enriched with conjugate at a concentration of 3.8 × 10(-7)m and an enhanced proliferation for samples enriched with insulin-like growth factor-1 at the highest concentration tested (2.1 × 10(-5)m).
Assuntos
Hidrogéis/química , Fator de Crescimento Insulin-Like I/fisiologia , Oligopeptídeos/química , Osteoblastos/fisiologia , Titânio/química , Sequência de Aminoácidos , Materiais Biocompatíveis/química , Adesão Celular , Técnicas de Cultura de Células , Proliferação de Células , Células Cultivadas , Meios de Cultura , Humanos , Masculino , Pessoa de Meia-Idade , Propriedades de Superfície , MolhabilidadeRESUMO
The most characterized stromal cell-derived factor-1 (SDF-1) variants are the isoform α, which is the predominant one but undergoes rapid proteolysis, and the ß isoform, which is more resistant. Through the interaction with a specific chemokine receptor called CXCR4, SDF-1 is able to regulate different physiological processes. The aim of this study was to verify the expression and potential functional role of SDF-1 and CXCR4 in the porcine ovary. Firstly, the expression of SDF-1 and its receptor in different ovarian districts was verified for the first time. Thereafter, the effect of SDF-1 ß isoform (51-72) fragment on functional parameters, such as proliferation, metabolic activity, redox status, nitric oxide production, and steroidogenic activity, was assessed on granulosa cells collected from follicles. In addition, the potential effect of this protein in vascular events was verified through investigations on porcine aortic (AOC) endothelial cells, such as the production of nitric oxide and viability tests. The proliferation and metabolic activity were not affected by treatment with the cytokine. As regard to steroidogenesis, the peptide stimulated both estrogen (P = 0.049) and progesterone production (P = 0.039). Redox status was affected by the examined substance since superoxide anion was inhibited (P = 0.001), while antioxidant power (P = 0.034), as well as nitric oxide generation, were stimulated (P = 0.034). Tests performed on AOCs showed significant stimulation of nitric oxide production (P = 0.004) by the examined peptide, while cell viability was unaffected. Therefore, the potential role of cytokine in the mechanisms involved in the regulation of follicular function can be hypothesized.
Assuntos
Quimiocina CXCL12/metabolismo , Folículo Ovariano/metabolismo , Receptores CXCR4/metabolismo , Células Estromais/metabolismo , Suínos , Animais , Quimiocina CXCL12/genética , Células Endoteliais/metabolismo , Feminino , Regulação da Expressão Gênica/fisiologia , Óxido Nítrico/metabolismo , Receptores CXCR4/genéticaRESUMO
Osteoblast cell adhesion to the extracellular matrix is established through two main pathways: one is mediated by the binding between integrin and a minimal adhesion sequence (RGD) on the extracellular protein, the other is based on the interactions between transmembrane proteoglycans and heparin-binding sequences found in many matrix proteins. The aim of this study is the evaluation in an in vivo endosseous implant model of the early osteogenic response of the peri-implant bone to a biomimetic titanium surface functionalized with the retro-inverso 2DHVP peptide, an analogue of Vitronectin heparin binding site. The experimental plan is based on a bilateral study design of Control and 2DHVP implants inserted respectively in the right and left femur distal metaphysis of adult male Wistar rats (n=16) weighing about 300grams and evaluated after 15days. Fluorochromic bone vital markers were given in a specific time frame, in order to monitor the dynamic of new bone deposition. The effect inducted by the peptidomimetic coating on the surrounding bone were qualitatively and quantitatively evaluated by means of static and dynamic histomorphometric analyses performed within three concentric and subsequent circular Regions of Interest (ROI) of equivalent thickness (220µm), ROI1 adjacent to the interface, ROI2, the middle, and ROI3 the farthest. The data indicated that these functionalized implants stimulated a higher bone apposition rate (p<0,01) and larger and rapid osteoblast activation in terms of mineralizing surface within ROI1 compared to the control (p<0,01). These higher osteoblast recruitment and activation leads to a greater bone-to-implant contact reached for DHVP samples (p<0,5). This represents an initial stimulus of the osteogenic activity that might results in a faster and better osteointegration process.
Assuntos
Osteogênese/efeitos dos fármacos , Peptidomiméticos , Próteses e Implantes , Titânio/química , Titânio/farmacologia , Sequência de Aminoácidos , Animais , Biomimética , Fêmur/anatomia & histologia , Fêmur/crescimento & desenvolvimento , Masculino , Osseointegração , Peptídeos/química , Ratos , Ratos Wistar , Receptores de Vitronectina/efeitos dos fármacos , Propriedades de SuperfícieRESUMO
Self-assembling peptides (SAPs) were investigated by means of XPS and Angular Dependent NEXAFS spectroscopies, with the aim to probe the influence of pH and Ionic Strength conditions on the chemical structure and molecular organization of SAPs anchored on titania surfaces. XPS at the C1s, N1s, O1s core levels allowed to study surfaces and biomolecule/substrate interfaces. NEXAFS data allowed ascertaining that SAPs molecular structure is preserved upon grafting to the titania surface. Angular Dependent NEXAFS was used to investigate the influence of environmental conditions on the molecular organization behaviour. The objective of our study was to establish a set of methodologies for obtaining arrangements of well-organized biomolecules on scaffolds surfaces as a basic technology to develop and optimize cells adhesion and proliferation for tissue engineering applications.
Assuntos
Materiais Biocompatíveis/química , Oligopeptídeos/química , Titânio/química , Concentração de Íons de Hidrogênio , Concentração Osmolar , Engenharia TecidualRESUMO
New experimental results are reported on the self-assembling behavior of EAK16-II, the first discovered ionic self-complementary peptide, incubated at ultralow concentration (10-6â¯M) at neutral pH onto differently charged surfaces. It is found that strongly negatively charged surfaces promote the self-assembly of flat, micrometer-long mono-molecular fibers of side-on assembled sequences, lying onto a continuous monolayer of flat-on EAK16-II molecules. These results suggest that the monomolecular EAK16-II self-assembly is driven by the peculiar matching condition between peptide and surface electrostatic properties. Molecular Mechanics simulations of the basic bimolecular interactions confirmed the experimental inferences, showing that the flat-on state is the most stable arrangement for two interacting EAK16-II sequences onto strongly negatively charged surfaces, where indeed EAK16-II ß-sheet conformation is stabilized, while the weak electrostatic interactions with mildly charged substrates promote an "entangled" EAK16-II geometry. Molecular Dynamics simulations further showed that the mobility and diffusional freedom of the peptides from the surfaces are ruled by the relative strength of peptide-surface electrostatic interactions, so that desorption probability for the peptide sequences is negligible from strongly-charged surfaces and high from mildly-charged surfaces. Furthermore, it has been found that an oligopeptide sequence lying onto two flat-on EAK16-II molecules, gains a remarkable lateral mobility, while remaining weakly bound to the surface, thus allowing the further molecular self-alignment responsible for the micrometer-long fiber formation. The reported results pave the way to the understanding and control of the subtle peptide-surface structural motifs matching enabling the formation of micrometer-long, but nanometer-wide monomolecular fibers.
Assuntos
Simulação de Dinâmica Molecular , Nanoestruturas/química , Oligopeptídeos/química , Estrutura Secundária de Proteína , Algoritmos , Sequência de Aminoácidos , Concentração de Íons de Hidrogênio , Microscopia de Força Atômica , Modelos Teóricos , Eletricidade Estática , Propriedades de SuperfícieRESUMO
The mid-Cretaceous greenhouse period in the southern Patagonia Argentina (Austral Basin) is represented by the Mata Amarilla Formation. It is composed of three informal sections which were deposited in littoral and continental environments. The boundary between the lower and middle sections of the Mata Amarilla Formation shows a drastic reduction in accommodation/sediment supply (A/S) ratio, interpreted as a forced regressive surface. This surface is characterized by a well-developed palaeosol, associated with the extensive preservation of a podocarp-dominated fossil forest over a vast area (more than 5400 km(2) ). Sedimentological and palaeopedological analyses, in conjunction with forest structure, tree density and growth ring analyses, indicate that the mid-Cenomanian forced regression can be distinguished as a non-uniform surface developed over a short period of time. This sequence boundary is recognized through a heterogeneous regional surface, delimited in the western part of the study area by an erosional surface generated by a large lateral channel migration recorded by sheet-like channel deposits with transported logs. By comparison, towards the eastern part of the study area, it appears as a paraconformity bounded by a very mature vertic Alfisol, which may have taken 40-100 ky to develop, and the preservation of a fossil forest in life position with a minimum age of 337 years. It is concluded that the extensive presence of these fossil forests at the same stratigraphic level in a vast region respond to changes in A/S ratio in a forced regressive surface at basin scale.