The selective and sustainable separation of Cd(II) using C6MImT/[C6MIm]PF6 extractant.

Cadmium has been classified as a kind of human carcinogens, and has a strong mobility in the water environment and this can result in serious harm to human health and environmental safety. Here, a new selective and efficient extraction-recovery strategy for Cd purification is provided by using C6MimT/[C6Mim]PF6 as the green extractant. Due to the high compatibility between C6MimT and [C6Mim]PF6, C6MimT-Cd was efficiently separated from the aqueous phase. When the concentration of Cd(II) was 1000 mg/L, the extraction rate could reached 99.9 %. By comparing [C6MIm]BF4 with [C6MIm]PF6, the hydrophobicity restrained the ion exchange between cation and Cd and significantly reduced the loss of extractant. The extracted Cd(II) was separated in the form of precipitation after stripping. The extraction system of C6MimT/[C6Mim]PF6 was stable after several extraction-stripping cycles. The extraction of Cd(II) by C6MimT/[C6Mim]PF6 system mainly realized by forming a neutral and extractable cadmium complexes between Cd(II) and thione. Based on the natural complexation mechanism between metal and C6MImT, Cd exists as obvious competitive advantage in coordination with C6MimT compare to Pb, Zn, Mg, Cr, Fe. This work overcomes the problems of extractant loss and organic pollution caused by volatile or ion exchange, which can only reduce environmental hazards, but also promote the recovery of cadmium and other valuable resources.

Synthesis and influencing factors of high-performance concrete based on copper tailings for efficient solidification of heavy metals.

Copper tailings containing a large amount of heavy metals such as Pb, Cu, As, Mn, and Cr discharged from its mining are a typical bulk solid waste, which is highly hazardous to human and the environment. This research proposed a sustainable and effective method for the environmentally sound utilization of copper tailings solid waste. A high-strength concrete material with copper tailings as the main raw material was successfully prepared, with a 28-day compressive strength of up to 85.35 MPa, the flexural strength reached 12.46 MPa, and the tailings utilization rate of 60%. The mechanical properties and heavy metal stabilization properties of the prepared high-performance concrete were obtained by adding coarse aggregates such as river sand, while changing the sand rate, cementitious material admixture and water-cement ratio. A long-term leaching experiment of the high-strength concrete material with 190 day was carried and proved that the material can be made with low or no risk of heavy metal contamination in copper tailings. Incorporation of copper tailings into the high-performance concrete hydration mainly contains three mechanisms: (i) Pore sealing effect generated by the formation of tailings geopolymer prompted the hardening of the geopolymer layer to form a monolithic package structure; (ii) The active SiO2 material in copper tailings reacts with Ca(OH)2 in the hydration products to produce a strong volcanic ash effect; (iii) the primary hydration of 3CaO·SiO2(C3S) and 3CaO·Al2O3(C3A) in the cement, and the secondary hydration reaction induced by the copper tailings and silica fume. These mechanisms are blended with each other to form a dense microstructure of the slurry, which embodies extremely high mechanical properties on a macroscopic scale, providing a reference role for the bulk utilization of copper tailings.

Adsorption of arsenic from aqueous solution using a zero-valent iron material modified by the ionic liquid [Hmim]SbF6.

The environmental and health impacts caused by arsenic (As) in wastewater make it necessary to carefully manage As wastes. In the present work, a composite of the ionic liquid [Hmim]SbF6 and nano-iron (H/Fe) was used as an adsorbent to remove As(v) from aqueous solution. To better understand the removal effect of H/Fe on As(v) in aqueous solution, the reaction parameters of pH, reaction temperature, time and H/Fe dosage were systematically analyzed in detail. The results show that H/Fe has significant removal efficiency toward As(v), and that the adsorption of As(v) by 0.5 g H/Fe reaches its maximum adsorption capacity within 2 h. The adsorption of As(v) on H/Fe is a non-linear, time-varying process. The initial adsorption reaction is fast; however, unlike at the beginning, the later reaction involves sustained slow absorption, resulting in a distinct two-phase adsorption characteristic. Redox reaction may be one of the mechanisms responsible for the slow adsorption of As(v) on H/Fe. At the same time, the As(v) removal effect of H/Fe is greatly restricted by the pH. Electrostatic adsorption, adsorption co-precipitation and redox reactions act together on H/Fe in the As(v) removal process. This study provides a basis for further clarifying the adsorption, adsorption rules and mechanism of As(v) on H/Fe and a feasible method for the improvement of As(v) removal efficiency of zero-valent iron materials.

Mixed effects of landscape complexity and insecticide use on ladybeetle abundance in wheat fields.

BACKGROUND: Although the abundance of insect natural enemies in crop fields may be influenced by the surrounding landscape and local field management, particularly insecticide use at the local scale, few studies have examined these factors simultaneously. In this study, we investigated the effects of landscape context and insecticide use in local fields on ladybeetle abundance in wheat fields in northern China. RESULTS: Woodlots and fallow land were the most important landscape variables enhancing ladybeetle abundance. We used the cumulative percentage of these land types to characterize landscape complexity. Comparing the change in ladybeetle abundance in wheat fields within different landscapes and with different in-field insecticide regimes, we found that although more complex landscapes enhanced ladybeetle abundance, the negative effects of insecticide use on ladybeetle populations were not offset by landscape complexity. Additionally, the positive effects of more complex landscapes on ladybeetle abundance were not significant in wheat fields subjected to high insecticide use. CONCLUSION: Ladybeetle abundance is enhanced by landscape complexity, but this is modified by insecticide use in local fields. Within-field efforts to maximize the conservation biological control of pests to improve crop yield should take into account the influence of the surrounding landscape. © 2018 Society of Chemical Industry.