Time-dependent proteomics and drug response in expanding cancer cells.

Cancer cell line is commonly used for discovery and development of anti-cancer drugs. It is generally considered that drug response remains constant for a certain cell line due to the identity of genetics thus protein patterns. Here, we demonstrated that cancer cells continued dividing even after reaching confluence, in that the proteomics was changed continuously and dramatically with strong relevance to cell division, cell adhesion and cell metabolism, indicating time-dependent intrinsically reprogramming of cells during expansion. Of note, the inhibition effect of most anti-cancer drugs was strikingly attenuated in culture cells along with cell expansion, with the strongest change at the third day when cells were still expanding. Profiling of an FDA-approved drug library revealed that attenuation of response with cell expansion is common for most drugs, an exception was TAK165 that was a selective inhibitor of mitochondrial respiratory chain complex I. Finally, we screened a panel of natural products and identified four pentacyclic triterpenes as selective inhibitors of cancer cells under prolonged growth. Taken together, our findings underscore that caution should be taken in evaluation of anti-cancer drugs using culture cells, and provide agents selectively targeting overgrowth cancer cells.

Room Temperature Construction of Vicinal Amino Alcohols via Electroreductive Cross-Coupling of N-Heteroarenes and Carbonyls.

Despite the widespread applications of α-hydroxyalkyl cyclic amines, direct and diverse access to such a class of unique vicinal amino alcohols still remains, to date, a challenge. Here, through a strategy of electroreductive α-hydroxyalkylation of inactive N-heteroarenes with ketones or electron-rich arylaldehydes, we describe a room temperature approach for the direct construction of α-hydroxyalkyl cyclic amines, which features a broad substrate scope, operational simplicity, high chemoselectivity, and no need for pressurized H2 gas and transition metal catalysts. The zinc ion generated from anode oxidation plays a crucial role in the activation of both reactants by decreasing their reduction potentials. The strategy of electroreduction in combination with substrate activation by Lewis acids in this work is anticipated to develop more useful transformations.

Hybrid Multimaterial 3D Printing Using Photocuring-While-Dispensing.

Three-dimensional (3D) printing methods, such as vat photopolymerization (VPP) and direct-ink-writing (DIW) processes, are known for their high-resolution and multimaterial capabilities, respectively. Here a novel hybrid 3D printing technique that combines the strengths of VPP and DIW processes to achieve multimaterial and high-resolution printing of functional structures and devices, is presented. The method involves dispensing liquid-like materials via syringes into a photocurable matrix material and subsequently using a Galvano mirror-controlled laser beam to selectively photocure the dispensed material trace or the matrix material surrounding the trace. The laser beam scanning and syringe dispensing are synchronized with a set delay to control liquid diffusion and in situ fixture. The versatility of the method is demonstrated by fabricating intricate 3D ant and wheel prototypes using various materials available for VPP and DIW technologies. The proposed photocuring-while-dispensing strategy offers advantages over conventional multimaterial 3D printing methods, such as integrating materials regardless of photocurability and viscosity, and fabricating heterogeneous structures with complex geometries and high resolution. With its principle demonstrated, this multimaterial 3D printing process will open up a wide range of potential applications with diverse functionalities and materials.

Crystal Growth of Defect-Free Single-Crystalline Fibers in Super-High Supersaturation Solution.

By controlling the supersaturation and choosing high-quality seeds, we successfully suppress the prismatic growth of the tetragonal potassium dihydrogen phosphate (KDP) SCFs, realize the rapid growth along the [001] direction, and obtain SCFs less than 10 µm in width with lengths of centimeters. The experimental results show that there exist critical supersaturation points, 22.40% and 41.41% at 25 °C, for initiating the growth of KDP SCF on its pyramidal and prismatic faces, respectively, which are quite different from those of the bulk crystals. We use the mechanism of 2D nucleation on smooth faces to explain the peculiar phenomena, assuming that there is no 2D or 3D defect on the surfaces of the seed fiber crystal. The assumption is supported by AFM observation of the surface micromorphology of the SCFs. Our solution growth technique developed can be used to grow ultrafine SCFs unable to be achieved by existing melt growth techniques.

Ravidomycin Analogs from Streptomyces sp. Exhibit Altered Antimicrobial and Cytotoxic Selectivity.

Six new ravidomycin analogs (1-4, 6, and 7) were isolated from Streptomyces sp. Am59 using UV- and LCMS-guided separation based on Global Natural Products Social (GNPS) molecular networking analysis. Furthermore, we isolated fucomycin V (9), which possesses the same chromophore as ravidomycin but features a d-fucopyranose instead of d-ravidosamine. This is the first report of 9 as a natural product. Four new analogs (10-13) of 9 were also isolated. The structures were elucidated by combined spectroscopic and computational methods. We also found an inconsistency with the published [α]D25 of deacetylravidomycin, which is reported to have a (-) sign. Instead, we observed a (+) specific rotation for the reported absolute configuration of deacetylravidomycin (containing d-ravidosamine). We confirmed the positive sign by reisolating deacetylravidomycin from S. ravidus and by deacetylating ravidomycin. Finally, antibacterial, antifungal, and cytotoxicity activities were determined for the compounds. Compared to deacetylravidomycin, the compounds 4-6, 9, 11, and 12 exhibited greater antibacterial selectivity.

A Personalized Mobile Cessation Intervention to Promote Smokers From the Preparation Stage to the Action Stage: Double-blind Randomized Controlled Trial.

BACKGROUND: Most mobile cessation studies have found that such interventions have a higher quitting rate than interventions providing minimal smoking cessation support. However, why such interventions are effective has been almost unstudied by researchers. OBJECTIVE: This paper describes the principles of the personalized mobile cessation intervention-based WeChat app and used generalized estimated equations to assess why a personalized mobile cessation intervention was more likely to promote smokers from the preparation stage to the action stage than a nonpersonalized intervention. METHODS: This is a 2-arm, double-blind, randomized controlled trial in five cities in China. The intervention group received a personalized mobile cessation intervention. The control group received a nonpersonalized SMS text message smoking cessation intervention. All information was sent by the WeChat app. The outcomes were the change in protection motivation theory construct scores and the change in transtheoretical model stages. RESULTS: A total of 722 participants were randomly assigned to the intervention or control group. Compared with those who received the nonpersonalized SMS text message intervention, smokers who received the personalized intervention presented lower intrinsic rewards, extrinsic rewards, and response costs. Intrinsic rewards were determinants of stage change, thus explaining why the intervention group was more likely to promote smokers from the preparation stage to the action stage (odds ratio 2.65, 95% CI 1.41-4.98). CONCLUSIONS: This study identified the psychological determinants at different stages to facilitate smokers moving forward to the next stage of quitting behavior and provides a framework to explore why a smoking cessation intervention is effective. TRIAL REGISTRATION: Chinese Clinical Trial Registry ChiCTR2100041942; https://tinyurl.com/2hhx4m7f.

Study of Preparation and Properties of Stereoregular Poly(cyclohexenylene carbonate).

Fixing carbon dioxide as a polymer material is an effective and environmentally beneficial approach for reducing the harm of CO2 greenhouse gas. In this paper, carbon dioxide and cyclohexene oxide were used as co-monomers, and a chiral binuclear cobalt complex with a biphenyl linker was employed as the catalyst to successfully prepare a poly(cyclohexenylene carbonate) with high stereoregularity. The influence of catalyst structure, CO2 pressure, and operating temperature on the copolymerization rate and polymer structure were systematically investigated. Optimal catalyst structure and operating conditions were determined, resulting in an excellent poly(cyclohexenylene carbonate) with a stereoregularity as high as 93.5%. Performance testing revealed that the polyester had a molecular weight of approximately 20 kg/mol, a glass transition temperature of 129.7 °C, an onset decomposition temperature of 290 °C, and a tensile strength of 42.8 MPa. These results demonstrate high thermal stability and mechanical strength, indicating the potential for expanding the applications of aliphatic polycarbonate materials.

Total Syntheses of Calyciphylline A-Type Alkaloids (-)-10-Deoxydaphnipaxianine A, (+)-Daphlongamine E and (+)-Calyciphylline R via Late-Stage Divinyl Carbinol Rearrangements.

Among the famous Daphniphyllum alkaloids family, the calyciphylline A-type subfamily has triggered particular interest from the organic synthesis community in recent years. Here, we report divergent total syntheses of three calyciphylline A-type alkaloids, namely, (-)-10-deoxydaphnipaxianine A, (+)-daphlongamine E, and (+)-calyciphylline R. Our work highlights an efficient, divergent strategy via late-stage divinyl carbinol rearrangements, including an unprecedented oxidative Nazarov electrocyclization using an unfunctionalized tertiary divinyl carbinol and an unusual allylic alcohol rearrangement. A highly efficient "donor-acceptor" platinum catalyst was used for a critical nitrile hydration step. Moreover, the power of selective amide reductions has also been showcased by novel and classic tactics.

Magneto-Orientation of Magnetic Double Stacks for Patterned Anisotropic Hydrogels with Multiple Responses and Modulable Motions.

Reported here is a multi-response anisotropic poly(N-isopropylacrylamide) hydrogel developed by using a rotating magnetic field to align magnetic double stacks (MDSs) that are fixed by polymerization. The magneto-orientation of MDSs originates from the unique structure with γ-Fe2 O3 nanoparticles sandwiched by two silicate nanosheets. The resultant gels not only exhibit anisotropic optical and mechanical properties but also show anisotropic responses to temperature and light. Gels with complex ordered structures of MDSs are further devised by multi-step magnetic orientation and photolithographic polymerization. These gels show varied birefringence patterns with potentials as information materials, and can deform into specific configurations upon stimulations. Multi-gait motions are further realized in the patterned gel through dynamic deformation under spatiotemporal light and friction regulation by imposed magnetic force. The magneto-orientation assisted fabrication of hydrogels with anisotropic structures and additional functions should bring opportunities for gel materials in biomedical devices, soft actuators/robots, etc.

Proteomic Exploration of Endocytosis of Framework Nucleic Acids.

Efficient cell internalization of framework nucleic acid nanostructures free of transfection agents provides new opportunities for developing biocompatible and intelligent nanoprobes and drug delivery carriers. Here, a proteomic identification method to screen target proteins that interact with tetrahedral DNA nanostructures (TDNs) during the process of endocytosis by combining drug affinity responsive target stability (DARTS) with liquid chromatography/tandem mass spectrometry (LC-MS/MS) techniques, is reported. It is found that that caveolin-1 (CAV1) and macropinocytosis-related protein sorting nexin5 (SNX5) are associated with the endocytosis of TNDs, which is further validated by microscale thermophoresis (MST) analysis. CAV1- and SNX5- knockout experiments reveal that both caveolae-mediated endocytosis and macropinocytosis mediate the cellular uptake of TDNs, which complement previous findings with fluorescence tracing methods. This method provides a generic strategy to analyze cellular internalization process of DNA nanostructures for biomedical applications.

Axial-Circular Magnetic Levitation: A Three-Dimensional Density Measurement and Manipulation Approach.

Magnetic levitation (MagLev) is a promising technology for density-based analysis and manipulation of diamagnetic objects of various physical forms. However, one major drawback is that MagLev can be performed only along the central axis (one-dimensional MagLev), thereby leading to (i) no knowledge about the magnetic field in regions other than the axial region, (ii) inability to handle objects of similar densities, because they are aggregated in the axial region, and (iii) objects that can be manipulated (e.g., separated or assembled) in only one single direction, that is, the axial direction. This work explores a novel approach called "axial-circular MagLev" to expand the operational space from one dimension to three dimensions, enabling substances to be stably levitated in both the axial and circular regions. Without noticeably sacrificing the total density measurement range, the highest sensitivity of the axial-circular MagLev device can be adjusted up to 1.5 × 104 mm/(g/cm3), approximately 115× better than that of the standard MagLev of two square magnets. Being able to fully utilize the operational space gives this approach greater maneuverability, as the three-dimensional self-assembly of controllable ring-shaped structures is demonstrated. Full space utilization extends the applicability of MagLev to bioengineering, pharmaceuticals, and advanced manufacturing.

Multiparameter Optimization of Two Common Proteomics Quantification Methods for Quantifying Low-Abundance Proteins.

Quantitative proteomics has been extensively applied in the screening of differentially regulated proteins in various research areas for decades, but its sensitivity and accuracy have been a bottleneck for many applications. Every step in the proteomics workflow can potentially affect the quantification of low-abundance proteins, but a systematic evaluation of their effects has not been done yet. In this work, to improve the sensitivity and accuracy of label-free quantification and tandem mass tags (TMT) labeling in quantifying low-abundance proteins, multiparameter optimization was carried out using a complex 2-proteome artificial sample mixture for a series of steps from sample preparation to data analysis, including the desalting of peptides, peptide injection amount for LC-MS/MS, MS1 resolution, the length of LC-MS/MS gradient, AGC targets, ion accumulation time, MS2 resolution, precursor coisolation threshold, data analysis software, statistical calculation methods, and protein fold changes, and the best settings for each parameter were defined. The suitable cutoffs for detecting low-abundance proteins with at least 1.5-fold and 2-fold changes were identified for label-free and TMT methods, respectively. The use of optimized parameters will significantly improve the overall performance of quantitative proteomics in quantifying low-abundance proteins and thus promote its application in other research areas.

Alpha-phase indium selenide saturable absorber for a femtosecond all-solid-state laser.

We successfully fabricated the high-quality few-layered α-In2Se3 and investigated its carrier dynamics and nonlinear optical absorption properties by pump-probe and open-aperture Z-scan technologies. Intra- and inter-band relaxation times were determined to be 7.2 ps and 270 ps, respectively, and the effective nonlinear absorption coefficient was measured as ßeff=-3.9×103 cm/GW (1064 nm). Based on α-In2Se3 saturable absorber, a continuous-wave mode-locking operation was realized. Pulse duration, repetition rate, and maximum output power were measured to be 352 fs, 42.4 MHz, and 0.56 W, corresponding to pulse energy of 13.2 nJ and peak power of 37.5 kW. To the best of our knowledge, this is the first demonstration of non-transition metal chalcogenides applied in ultrafast all-solid-state bulk lasers. This work well verified that α-In2Se3 should be a promising optical modulator candidate for all-solid-state lasers.

Single-Ring Magnetic Levitation Configuration for Object Manipulation and Density-Based Measurement.

Magnetic levitation is a recent research hot spot; however, most of the extant configurations use two magnets with like poles facing each other. This paper proposes a novel magnetic levitation configuration that is based on a single ring magnet, and this configuration opens a wide operational space that enables object manipulation and density-based measurement. We develop a mathematical model to calculate the magnetic field around the magnet and to numerically correlate the levitation height and density of the object. Experimental results prove that this novel configuration can achieve a high accuracy (±0.0005 to ±0.0078 g/cm3) in density measurement for small-sized (∼5 µL) samples. It can manipulate particles, powders, and oil droplets effectively without any direct contact, and it has high sensitivity in the separation of multiple diamagnetic objects with slight differences in densities as well. The accuracy and sensitivity of the proposed configuration are both higher than those of the extant configurations. All of these results are expected to promote deeper study and applications of the magnetic levitation configuration in the field of density-based characterizations and manipulations.

Common-path surface plasmon interferometer with radial polarization.

We present a common-path surface plasmon interferometer with radial polarization. We show how the V(z) effect, the output of the microscope versus defocus z, can be derived utilizing a radially polarized illumination and a virtual annulus. The measurement of the V(z) effect gives a strong signature of the surface plasmon propagation, which is functionally related to the material properties. We discuss the advantages of using radial polarization compared to linear polarization.

Few-layer Ti3C2Tx (T = O, OH, or F) saturable absorber for a femtosecond bulk laser.

Few-layered titanium carbide (Ti3C2Tx), a novel two-dimensional (2D) Van der Waals material in the MXene family, was fabricated with a liquid-phase method and applied as a saturable absorber for a continuous-wave mode-locked femtosecond bulk laser. Pulses as short as 316 fs with a repetition rate of 64.06 MHz and maximum output power of 0.77 W were achieved at the central wavelength of 1053.2 nm, demonstrating the first known, to the best of our knowledge, application of MXene in an all-solid-state laser. Considering the flexible band gap for different surface functional groups of Ti3C2Tx, these results may promote the development of ultrafast photonics and further applications of 2D optoelectronic layered materials in the infrared and mid-infrared regions.

Evaluation of Different N-Glycopeptide Enrichment Methods for N-Glycosylation Sites Mapping in Mouse Brain.

N-Glycosylation of proteins plays a critical role in many biological pathways. Because highly heterogeneous N-glycopeptides are present in biological sources, the enrichment procedure is a crucial step for mass spectrometry analysis. Five enrichment methods, including IP-ZIC-HILIC, hydrazide chemistry, lectin affinity, ZIC-HILIC-FA, and TiO2 affinity were evaluated and compared in the study of mapping N-glycosylation sites in mouse brain. On the basis of our results, the identified N-glycosylation sites were 1891, 1241, 891, 869, and 710 and the FDR values were 3.29, 5.62, 9.54, 9.54, and 20.02%, respectively. Therefore, IP-ZIC-HILIC enrichment method displayed the highest sensitivity and specificity. In this work, we identified a total of 3446 unique glycosylation sites conforming to the N-glycosylation consensus motif (N-X-T/S/C; X ≠ P) with (18)O labeling in 1597 N-glycoproteins. N-glycosylation site information was used to confirm or correct the transmembrane topology of the 57 novel transmembrane N-glycoproteins.

Long-acting inhaled medicines: Present and future.

Inhaled medicines continue to be an essential part of treatment for respiratory diseases such as asthma, chronic obstructive pulmonary disease, and cystic fibrosis. In addition, inhalation technology, which is an active area of research and innovation to deliver medications via the lung to the bloodstream, offers potential advantages such as rapid onset of action, enhanced bioavailability, and reduced side effects for local treatments. Certain inhaled macromolecules and particles can also end up in different organs via lymphatic transport from the respiratory epithelium. While the majority of research on inhaled medicines is focused on the delivery technology, particle engineering, combination therapies, innovations in inhaler devices, and digital health technologies, researchers are also exploring new pharmaceutical technologies and strategies to prolong the duration of action of inhaled drugs. This is because, in contrast to most inhaled medicines that exert a rapid onset and short duration of action, long-acting inhaled medicines (LAIM) improve not only the patient compliance by reducing the dosing frequency, but also the effectiveness and convenience of inhaled therapies to better manage patients' conditions. This paper reviews the advances in LAIM, the pharmaceutical technologies and strategies for developing LAIM, and emerging new inhaled modalities that possess a long-acting nature and potential in the treatment and prevention of various diseases. The challenges in the development of the future LAIM are also discussed where active research and innovations are taking place.

Occurrence, potential sources, and ecological risk assessment of microplastics in the inland river basins in Northern China.

Microplastics (MPs) are the pollutants, found widely across various environmental media. However, studies on the MP pollution in urban rivers and the necessary risk assessments remain limited. In this study, the abundance and characteristics of microplastics in a typical urban river were examined to evaluate their distribution, sources, and ecological risks. It was observed that the abundance of MPs in sediments (220-2840 items·kg-1 dry weight (DW)) was much higher than that in surface water (2.9-10.3 items·L-1), indicating that the sediment is the "sink" of river MPs. Surface water and sediment were dominated by small particle size MPs (< 0.5 mm). Fiber and debris were common shapes of MPs in rivers and sediments. The microplastics in river water and sediments were primarily white and transparent, respectively. Polypropylene (PP) and polyethylene (PE) were the major polymers found.

Leucine as a Moisture-Protective Excipient in Spray-Dried Protein/Trehalose Formulation.

The incorporation of leucine (Leu), a hydrophobic amino acid, into pharmaceutically relevant particles via spray-drying can improve the physicochemical and particulate properties, stability, and ultimately bioavailability of the final product. More specifically, Leu has been proposed to form a shell on the surface of spray-dried (SD) particles. The aim of this study was to explore the potential of Leu in the SD protein/trehalose (Tre) formulation to control the water uptake and moisture-induced recrystallization of amorphous Tre, using lysozyme (LZM) as a model protein. LZM/Tre (1:1, w/w) was dissolved in water with varied amounts of Leu (0 - 40%, w/w) and processed by spray-drying. The solid form, residual moisture content (RMC), hygroscopicity, and morphology of SD LZM/Tre/Leu powders were evaluated, before and after storage under 22°C/55% RH conditions for 90 and 180 days. The X-ray powder diffraction results showed that Leu was in crystalline form when the amount of Leu in the formulation was at least 20% (w/w). Thermo-gravimetric analysis and scanning electron microscopy results showed that 0%, 5%, and 10% (w/w) Leu formulations led to comparable RMC and raisin-like round particles. In contrast, higher Leu contents resulted in a lower RMC and increased surface corrugation of the SD particles. Dynamic vapor sorption analysis showed that partial recrystallization of amorphous Tre to crystalline Tre·dihydrate occurred in the 0% Leu formulation. However, adding as little as 5% (w/w) Leu inhibited this recrystallization during the water sorption/desorption cycle. In addition, after storage, the formulations with higher Leu contents showed reduced water uptake. Instead of observing recrystallization of amorphous Tre in 0%, 5%, and 10% (w/w) Leu formulations, recrystallization of amorphous Leu was noted in the 5% and 10% (w/w) Leu formulations after storage. In summary, our study demonstrated that the addition of Leu has the potential to reduce water uptake and inhibit moisture-induced recrystallization of amorphous Tre in the SD protein/Tre powder system.