RESUMO
Polymer-based dielectric film capacitors are essential energy storage components in electronic and power systems due to their ultrahigh power density and ultra-fast charge storage/release capability. Nonetheless, their relatively low energy density does not fully meet the requirements of power electronics and pulsed power systems. Herein, a scalable composite dielectric film based on a ferroelectric polymer with edge hydroxylated boron nitride nanosheets (BNNS-OH) is fabricated via the construction of a hydrogen bonding network and stretching orientation strategy. The presence of hydroxyl groups on boron nitride aids in forming a robust hydrogen bonding network within the ferroelectric polymer, leading to a significant increase in Young's modulus and superior dielectric performance. Furthermore, the stretching process aligns the BNNS-OH and the hydrogen bonding network along the drawing direction via covalent and hydrogen bonding interaction, resulting in a remarkable tensile strength (109 MPa), breakdown strength (688 MV m-1), and energy density (28.2 J cm-3), outperforming mostrepresentative polymer-based dielectric films. In combining the advantages of a simple preparation process, extraordinary energy storage performance, and low-cost raw materials, this strategy is viable for large-scale production of polymer-based dielectric films with high mechanical and dielectric performance and opens a new path for the development of next-generation energy storage applications.
RESUMO
Posttreatment of pristine metal-organic frameworks (MOFs) with suitable vapor may be an effective way to regulate their structures and properties but has been less explored. Herein, we report an interesting example in which a crystalline nonporous Eu(III)-MOF was transferred to a porous amorphous MOF (aMOF) via iodine vapor adsorption-desorption posttreatment, and the resulting aMOF showed improved turn-on sensing properties with respect to Ag+ ions. The crystalline Eu-MOF, namely, Eu-IPDA, was assembled from Eu(III) and 4,4'-{4-[4-(1H-imidazol-1-yl)phenyl]pyridine-2,6-diyl}dibenzoic acid (H2IPDA) and exhibited a two-dimensional (2D) coordination network based on one-dimensional secondary building blocks. The close packing of the 2D networks gives rise to a three-dimensional supramolecular framework without any significant pores. Interestingly, the nonporous Eu-IPDA could absorb iodine molecules when Eu-IPDA crystals were placed in iodine vapor at 85 °C, and the adsorption capacity was 1.90 g/g, which is comparable to those of many MOFs with large BET surfaces. The adsorption of iodine is attributed to the strong interactions among the iodine molecule, the carboxy group, and the N-containing group and leads to the amorphization of the framework. After immersion of the iodine-loaded Eu-IPDA in EtOH, approximately 89.7% of the iodine was removed, resulting in a porous amorphous MOF, denoted as a-Eu-IPDA. In addition, the remaining iodine in the a-Eu-IPDA framework causes strong luminescent quenching in the fluorescence emission region of the Eu(III) center when compared with that in Eu-IPDA. The luminescence intensity of a-Eu-IPDA in water suspensions was significantly enhanced when Ag+ ions were added, with a detection limit of 4.76 × 10-6 M, which is 1000 times that of pristine Eu-IPDA. It also showed strong anti-interference ability over many common competitive metal ions and has the potential to sense Ag+ in natural water bodies and traditional Chinese medicine preparations. A mechanistic study showed that the interactions between Ag+ and the absorbed iodine, the carboxylate group, and the N atoms all contribute to the sensing performance of a-Eu-IPDA.
RESUMO
Electrospun polyvinylidene fluoride (PVDF) piezoelectric fibers have high potential applicability in mechanical energy harvesting and self-powered sensing owing to their high electromechanical coupling capabilities. Strategies for tailoring fiber morphology have been the primary focus for realizing enhanced piezoelectric output. However, the relationship between piezoelectric performance and fiber structure remains unclear. This study fabricates PVDF hollow fibers through coaxial electrospinning, whose wall thickness can be tuned by changing the internal solution concentration. Simulation analysis demonstrates an increased effective deformation of the hollow fiber as enlarging inner diameter, resulting in enhanced piezoelectric output, which is in excellent agreement with the experimental results. This study is the first to unravel the influence mechanism of morphology regulation of a PVDF hollow fiber on its piezoelectric performance from both simulation and experimental aspects. The optimal PVDF hollow fiber piezoelectric energy harvester (PEH) delivers a piezoelectric output voltage of 32.6 V, ≈3 times that of the solid PVDF fiber PEH. Furthermore, the electrical output of hollow fiber PEH can be stably stored in secondary energy storage systems to power microelectronics. This study highlights an efficient approach for reconciling the simulation and tailoring the fiber PEH morphology for enhanced performances for future self-powered systems.
RESUMO
Piezoelectric pressure sensors are important for applications in robotics, artificial intelligence, communication devices, etc. The hyperboloid is theoretically predicted to be an unusual 3D structure that allows concerted piezoelectric enhancement owing to its synergistic effects of geometrical stress confinement and stress concentration, but has not been experimentally fulfilled due to a lack of efficient architecting techniques. In this work, a 3D hyperboloidal arrayed self-polarized PVDF piezoelectric energy harvester (PEH) is successfully fabricated by incorporating electrohydrodynamic (EHD) pulling technology into fused deposition modeling (FDM) 3D printing. This strategy not only simplifies the layer-by-layer constructing procedure for arrays, but simultaneously realizes a self-polarized and high ß-phase (92%) PVDF PEH in a single electric-pulling step, saving posttreatment such as poling and removing excessive additives. Such a PEH delivers a significantly enhanced piezoelectric potential which is around 8 times that of a 2D flat film sensor. Moreover, this PEH featuring excellent linearity within a wide pressure regime, enables the sensing of human activities in a relatively large force range, which is otherwise difficult for traditional film sensors to differentiate. This work demonstrates a potential roadmap to advanced piezoelectric sensors exploiting unusual 3D structures enabled by the unique EHD pulling coupled 3D printing technique.
Assuntos
Inteligência Artificial , Polivinil , Eletricidade , Polímeros de Fluorcarboneto , Humanos , Polivinil/química , Impressão TridimensionalRESUMO
Highly efficient and mechanically durable photothermal materials are urgently needed for solar harvesting, but their development still remains challenging. Here, inspired by the hierarchically oriented architecture of natural spider silk, an ultrarobust liquid metals (LMs)/polymer composite is presented via dynamic crosslinking based on the unique mechanical deformable characteristic of LMs. Dynamically cross-linked core-shell structured LMs droplets can be squeezed along with the orientational crystallization of polymer chains during drawing, thus enabling LMs nanoparticles to be uniformly programmed in the rigid polyethylene nanofiber skeleton. The resultant composite exhibits an unprecedented combination of strong broad-band light absorption (96.9-99.3%), excellent photothermal conversion ability, remarkable mechanical property (tensile strength of 283.7 MPa, which can lift 200 000 times its own weight), and long-term structural reliability (bearing 100 000 bending cycles). A powerful and durable solar thermoelectric generator system for real-environmental solar-heat-electricity conversion is further demonstrated, providing a valuable guidance for the design and fabrication of high-performance solar-harvesting materials.
Assuntos
Nanopartículas Metálicas , Nanofibras , Polímeros , Reprodutibilidade dos Testes , Luz SolarRESUMO
Mechanically adaptive materials responsive to environmental stimuli through changing mechanical properties are highly attractive in intelligent devices. However, it is hard to regulate the mechanical properties of most mechanically adaptive materials in a facile way. Moreover, it remains a challenge to achieve mechano-regulable materials with mechanical properties ranging from high strength to extreme toughness. Here, inspired by the reversible nanofibril network structure of skeletal muscle to achieve muscle strength regulation, we present a mechano-regulable biopolymeric silk fibroin (SF) composite through regulating dynamic metal-ligand coordination bonds by using water molecules as competitive regulators. Efficient interfacial hydrogen bonds between tannic acid-tungsten disulfide nanohybrids and the SF matrix endow the composite with high mechanical strength and self-healing ability. The resulting composite exhibits 837-fold change in Young's modulus (5.77 ± 0.61 GPa to 6.89 ± 0.64 MPa) after water vapor triggering, high mechanical properties (72.5 ± 6.3 MPa), and excellent self-healing efficiency (nearly 100%). The proof-of-concept ultraconformable iontronic skin and smart actuators are demonstrated, thereby providing a direction for future self-adaptive smart device applications.
Assuntos
Fibroínas , Materiais Inteligentes , Fibroínas/química , Ligantes , Seda/química , Vapor , Sulfetos , Taninos , Compostos de TungstênioRESUMO
Endowing supercapacitors with higher energy density is of great practical significance but remains extremely challenging. In this work, an innovative densified 3D printing enabled by a surface-adaptive capillarity strategy is proposed for the first time. The printable ink formulated with pyrrole surface-modified reduced graphene oxide renders the printed electrodes excellent surface tension regulability to the subsequent capillary densification, creating an intensely condensed electrode with well-maintained structural integrity. Furthermore, simultaneous in situ nitrogen doping and hierarchical micro-meso porosity are readily realized upon post-carbonization, encouraging enhanced capacitance and fast reaction dynamics. As a result, the printed symmetric supercapacitor delivers a double leap in areal and volumetric energy densities in both aqueous and organic electrolytes, a rarely achieved yet gravely desired attribute for 3D printed energy storage devices.
RESUMO
The practical application of germanium phosphide (GeP) in battery systems is seriously impeded referring to the sluggish reaction kinetics and severe volume change. Nanostructure design that elaborately resolves the above issues is highly desired but still remains a big challenge. Herein, unique hollow nanoreactors assembled with nitrogen-doped carbon networks for in situ synthesis of the GeP electrodes are proposed for the first time. Such nanoreactors form a self-supported conductive network, ensuring sufficient electrolyte infiltration and fast electron transport. They restrain crystal growth and accommodate the volume expansion of GeP simultaneously. Reaction kinetics and confinement effect are optimized through nanoreactor size regulation. The optimized GeP electrode has high reversible capacities and outstanding cyclability and rate performance for sodium storage, outperforming most previously reported phosphides.
RESUMO
We propose an in situ template method to directionally induce the construction of germanium phosphide nanobar (GeP-nb) corals with an adjustable aspect ratio. The GeP nanobars grown onto conductive matrix with high aspect ratio expose more quickest electron-ion transportation facets for fast reaction dynamics. The customized GeP-nb electrode delivers a self-healable homeostatic behavior by reversibly stabilizing GeP crystalline structure through multi-phase reactions to maintain structural integrity and cycling stability (850â mAh g-1 at 1â A g-1 after 500â cycles). As a result, the GeP-nb presents the highest Li+ diffusion coefficient (6.21×10-11 â cm2 s-1 ) among all the Ge-based anode materials studied so far, rendering an excellent rate performance (620â mAh g-1 at 5â A g-1 ) as a lithium-ion battery (LIB) anode.
RESUMO
Despite holding the advantages of high theoretical capacity and low cost, the practical application of layered-structured potassium vanadates in zinc ion batteries (ZIBs) has been staggered by the sluggish ion diffusion, low intrinsic electronic conductivity, and unstable crystal structure. Herein, for the first time, a phase stabilized crystal etching strategy is proposed to innovate an oxygen-vacancy-rich K0.486 V2 O5 nanorod composite (Ov-KVO@rGO) as a high-performance ZIB cathode. The in situ ascorbic acid assisted crystal etching process introduces abundant oxygen-vacancies into the K0.486 V2 O5 lattices, not only elaborately expanding the lattice spacing for faster ion diffusion and more active sites due to the weakened interlayer electrostatic interaction, but also enhancing the electronic conductivity by accumulating electrons around the vacancies, which is also evidenced by density functional theory calculations. Meanwhile, the encapsulating rGO layer ably stabilizes the K0.486 V2 O5 crystal phase otherwise is hard to endure subject to such a harsh chemical etching. As a result, the optimized Ov-KVO@rGO electrode delivers record-high rate capabilities with 462 and 272.39 mAh g-1 at 0.2 and 10 A g-1 , respectively, outperforming all previously reported potassium vanadate cathodes and most other vanadium-based materials. This work highlights a significant advancement of layer-structured vanadium based-materials towards practical application in ZIBs.
RESUMO
Anisotropic pressure sensors are gaining increasing attention for next-generation wearable electronics and intelligent infrastructure owing to their sensitivity in identifying different directional forces. 3D printing technologies have unparalleled advantages in the design of anisotropic pressure sensors with customized 3D structures for realizing tunable anisotropy. 3D printing has demonstrated few successes in utilizing piezoelectric nanocomposites for anisotropic recognition. However, 3D-printed anisotropic piezoresistive pressure sensors (PPSs) remain unexplored despite their convenience in saving the poling process. This study pioneers the development of an aqueous printable ink containing waterborne polyurethane elastomer. An anisotropic PPS featuring tailorable flexibility in macroscopic 3D structures and microscopic pore morphologies is created by adopting direct ink writing 3D printing technology. Consequently, the desired directional force perception is achieved by programming the printing schemes. Notably, the printed PPS demonstrated excellent deformability, with a relative sensitivity of 1.22 (kPa*wt. %)-1 over a substantial pressure range (2.8 to 8.1 kPa), approximately fivefold than that of a state-of-the-art carbon-based PPS. This study underscores the versatility of 3D printing in customizing highly sensitive anisotropic pressure sensors for advanced sensing applications that are difficult to achieve using conventional measures.
RESUMO
One of the greenest and promising ways to solve the problem of freshwater crisis is surface solar steam generation from seawater. A great number of photothermal materials with multi-component and multi-layered delicate yet complex structures often suffer from either low evaporation rate or high energy loss. Here, this work presents a single component foam evaporator with steam generation rate of up to 4.32 kg m-2 h-1 under 1 sun irradiation. The evaporator is constructed from an aniline oligomer as a single light-absorbing component, covalent linked with polyethylene glycol to form a monolithic polymer foam. Floating on the seawater, the foam has absorbance of 99.5% over the entire solar spectral range and low thermal conductivity (0.0077 W K-1m-1) that effectively retains heat in the material and at the interface. After 3 months of continuous outdoor natural sunlight irradiation, the evaporator maintains a stable and durable evaporation rate. Moreover, the materials have good mechanical properties (7.48 MPa young's modulus and 57.38% elongation at break) and excellent chemical resistance in 10 common organic solvents and aqueous solutions of pH = 1 to 14. This study provides a new system and strategy for desalination, steam power generation, treatment of polluted water and sewage, etc.
RESUMO
Lignite, as one of the coal materials, has been considered a promising precursor for hard carbon anodes in sodium-ion batteries (SIBs) owing to its low cost and high carbon yield. Nevertheless, hard carbon directly derived from lignite pyrolysis typically exhibits highly ordered microstructure with narrow interlayer spacing and relatively unreactive interfacial properties, owing to the abundance of polycyclic aromatic hydrocarbons and inert aromatic rings within its molecular composition. Herein, an innovative demineralization activating strategy is established to simultaneously modulate the interfacial properties and the microstructure of lignite-derived carbon for the development of high-performance SIBs. Demineralization process not only creates numerous void spaces in the matrix of lignite precursor to assist aromatic hydrocarbon rearrangement, thereby reducing the ordering and expanding interlayer spacing, but also exposes more interfacial oxygen-containing functional groups to effectively increasing the sodium storage active sites. As a result, the optimal demineralized lignite-derived hard carbon (DLHC 1300) delivers a high reversible capacity of 335.6 mAh g-1 at 30 mA g-1, superior rate performance of 246.3 mAh g-1 at 6 A g-1 and nearly 100 % capacity retention after 1100 cycles at 1A g-1. Furthermore, the optimized DLHC 1300 material functions as an outstanding anode in sodium ion full cells. This work significantly advances the development of low-cost, high-performance commercial hard carbon anodes for SIBs.
RESUMO
Intestinal barrier dysfunction characterized by the functional loss of the intestinal epithelium's tight junction (TJ) barrier is a key factor in the pathogenesis of ulcerative colitis (UC). Although rapamycin, an mTOR (mechanistic target of rapamycin) inhibitor, has shown promise in inducing clinical remission and mucosal healing in inflammatory bowel disease, its underlying mechanism remains elusive. Thus, this study investigated the role of the mTOR pathway in regulating the intestinal barrier. To investigate the molecular mechanism regulating the intestinal barrier, specific intestinal epithelial phenazine biosynthesis-like domain-containing protein (PBLD)-deficient (PBLDIEC-/-) mice and control wild-type (WT) mice were intraperitoneally injected with rapamycin or MHY1485. To determine the relevance of the findings for UC, we analyzed transcriptome data and single-cell expression profiles from public databases and intestinal mucosal tissues obtained from patients with active UC or colon cancer. We observed that mTOR activation in the intestinal epithelium of patients with active UC. Moreover, in vivo, rapamycin markedly increased the expressions of PBLD and TJ proteins and reduced intestinal inflammation in mice with dextran sulfate sodium-induced enteritis. However, the therapeutic efficacy of rapamycin was notably reduced in PBLDIEC-/- mice. In vitro, rapamycin influenced PBLD expression by modulating the nuclear transcription of transcription factor EB (TFEB). Angiomotin (AMOT) could directly bind to PBLD, and rapamycin could not effectively increase the expression of TJ proteins after the knockdown of PBLD or AMOT. In summary, the administration of rapamycin is a potential treatment for UC, and targeting the mTOR/PBLD/AMOT axis is a potential novel approach for UC treatment.
Assuntos
Colite Ulcerativa , Mucosa Intestinal , Transdução de Sinais , Sirolimo , Serina-Treonina Quinases TOR , Animais , Colite Ulcerativa/metabolismo , Colite Ulcerativa/tratamento farmacológico , Colite Ulcerativa/induzido quimicamente , Colite Ulcerativa/patologia , Colite Ulcerativa/genética , Serina-Treonina Quinases TOR/metabolismo , Mucosa Intestinal/metabolismo , Mucosa Intestinal/patologia , Mucosa Intestinal/efeitos dos fármacos , Sirolimo/farmacologia , Humanos , Camundongos , Transdução de Sinais/efeitos dos fármacos , Camundongos Knockout , Masculino , Camundongos Endogâmicos C57BL , Junções Íntimas/metabolismo , Junções Íntimas/efeitos dos fármacosRESUMO
Plastics, renowned for their outstanding properties and extensive applications, assume an indispensable and irreplaceable role in modern society. However, the ubiquitous consumption of plastic items has led to a growing accumulation of plastic waste. Unreasonable practices in the production, utilization, and recycling of plastics have led to substantial energy resource depletion and environmental pollution. Herein, the state-of-the-art advancements in the lifecycle management of plastics are timely reviewed. Unlike typical reviews focused on plastic recycling, this work presents an in-depth analysis of the entire lifecycle of plastics, covering the whole process from synthesis, processing, to ultimate disposal. The primary emphasis lies on selecting judicious strategies and methodologies at each lifecycle stage to mitigate the adverse environmental impact of waste plastics. Specifically, the article delineates the rationale, methods, and advancements realized in various lifecycle stages through both physical and chemical recycling pathways. The focal point is the attainment of optimal recycling rates for waste plastics, thereby alleviating the ecological burden of plastic pollution. By scrutinizing the entire lifecycle of plastics, the article aims to furnish comprehensive solutions for reducing plastic pollution and fostering sustainability across all facets of plastic production, utilization, and disposal.
RESUMO
For polyvinylidene fluoride (PVDF) based piezoelectric composites, epitaxial growth of ZnO nanorods (ZnO-nr) piezoceramic layer on PVDF is an effective way to improve their piezoelectric performance. However, the crystal nucleus of ZnO featuring polar surfaces that cannot be directly attached to hydrophobic PVDF with low surface energy. Herein, direct ink writing (DIW) 3D printing is employed for the first time to create ß-PVDF reservoirs with significantly enhanced surface energy, facilitating the attachment and epitaxial growth of ZnO-nr. The printed ß-PVDF reservoirs designed with programmed macro-pores and abundant inner micropores, enable a higher loading of ZnO-nr by more than one magnitude, thereby boosting the electro-mechanical response. The resulting PVDF/ZnO core-shell piezoelectric energy harvester (PEH) delivers an output voltage of 33.2 V, as well as an unprecedentedly high relative output voltage of 2.76 V/wt.%, which is 2.63 times that of the state-of-the-art 3D-printed PVDF/piezoceramics PEHs. Furthermore, it can differentiate subtle human motions whereas hybrid PEHs cannot distinct. This work demonstrates that the DIW 3D printing approach offers a simple and convenient design idea for creating high performance PEHs.
RESUMO
Sodium-oxygen battery has attracted tremendous interest due to its extraordinary theoretical specific energy (1605 Wh kg-1 NaO2) and appealing element abundance. However, definite mechanistic factors governing efficient oxygen diffusion and consumption inside electrolyte-flooded air cathodes remain elusive thus precluding a true gas diffusion electrode capable of high discharge current (i.e., several mA cm-2) and superior output power. Herein, 3D-printing technology is adopted to create gas channels with tailored channel size and structure to demystify the diffusion-limited oxygen delivery process. It is revealed that as the clogging discharging products increase, large channel size, and interconnected channel structure are essential to guaranteeing fast O2 diffusion. Moreover, to further encourage O2 diffusion, a bio-inspired breathable cathode with progressively branching channels that balances between O2 passage and reaction is 3D printed. This elaborated 3D electrode allows a sodium-oxygen cell to deliver an impressive discharging current density of up to 4 mA cm-2 and an output power of 8.4 mW cm-2, giving rise to an outstanding capacity of 18.4 mAh cm-2. The unraveled mystery of oxygen delivery enabled by 3D printing points to a valuable roadmap for the rational design of metal-air batteries toward practical applications.
RESUMO
Conductive hydrogels have garnered significant interest in the realm of wearable flexible sensors due to their close resemblance to human tissue, wearability, and precise signal acquisition capabilities. However, the concurrent attainment of an epidermal hydrogel sensor incorporating reliable self-healing capabilities, biodegradability, robust adhesiveness, and the ability to precisely capture subtle electrophysiological signals poses a daunting and intricate challenge. Herein, an innovative MXene-based composite hydrogel (PBM hydrogel) with exceptional self-healing, self-adhesive, and versatile functionality is engineered through the integration of conductive MXene nanosheets into a well-structured poly(vinyl alcohol) (PVA) and bacterial cellulose (BC) hydrogel three-dimensional (3D) network, utilizing multiple dynamic cross-linking synergistic repeated freeze-thaw strategy. The hydrogel harnesses the presence of dynamically reversible borax ester bonds and multiple hydrogen bonds between its constituents, endowing it with rapid self-healing efficiency (97.8%) and formidable self-adhesive capability. The assembled PBM hydrogel epidermal sensor possesses a rapid response time (10 ms) and exhibits versatility in detecting diverse external stimuli and human movements such as vocalization, handwriting, joint motion, Morse code signals, and even monitoring infusion status. Additionally, the PBM hydrogel sensor offers the added advantage of swift degradation in phosphate-buffered saline solution (within a span of 56 days) and H2O2 solution (in just 53 min), maintaining an eco-friendly profile devoid of any environmental pollution. This work lays the groundwork for possible uses in electronic skins, interactions between humans and machines, and the monitoring of individualized healthcare.
Assuntos
Adesivos , Hidrogéis , Nitritos , Elementos de Transição , Humanos , Peróxido de Hidrogênio , Cimentos de Resina , Condutividade ElétricaRESUMO
Flexible piezoelectric energy harvesters (PEHs) have gained substantial attention owing to their wearability, breathability, and sustainable self-powered supply. However, existing film PEHs cannot identify forces in different bending directions, limiting their applications in wearable electronics and artificial intelligence. This study constructs a fabric PEH for the first time by introducing piezoelectric anisotropic BaTi2 O5 nanorods (BT2-nr) into piezoelectric polyvinylidene fluoride (PVDF) nanofibers with a bi-oriented architecture, in which BT2-nr uniformly aligns in the PVDF nanofiber during electrospinning. The dual-orientation feature endows the flexible PEH with anisotropy, which can sensitively identify the forces at different bending directions (e.g., bent vertically, parallelly, or twisted by 45° along the fiber orientations). Simultaneously, the composite PVDF/BT2 PEH containing 15 wt.% BT2-nr delivers an optimal piezoelectric output of 31.2 V with a high sensitivity of 5.22 V N-1 . The developed anisotropic PEH can be used as a self-powered pressure sensor for multimodal intelligent biomonitoring of human movement. This study provides a feasible strategy for fabricating self-powered flexible PEHs with high electromechanical conversion efficiency and multifunctionality for wearable piezoelectric pressure sensors.
RESUMO
Despite tremendous efforts that have been dedicated to high-performance electrochemical energy storage devices (EESDs), traditional electrode fabrication processes still face the daunting challenge of limited energy/power density or compromised mechanical compliance. 3D thick electrodes can maximize the utilization of z-axis space to enhance the energy density of EESDs but still suffer from limitations in terms of poor mechanical stability and sluggish electron/ion transport. Direct ink writing (DIW), an eminent branch of 3D printing technology, has gained popularity in the manufacture of 3D electrodes with intricately designed architectures and rationally regulated porosity, promoting a triple boost in areal mass loading, ion diffusion kinetics, and mechanical flexibility. This focus review highlights the fundamentals of printable inks and typical configurations of 3D-printed devices. In particular, preparation strategies for high-performance and multifunctional 3D-printed EESDs are systemically discussed and classified according to performance evaluation metrics such as high areal energy density, high power density, high volumetric energy density, and mechanical flexibility. Challenges and prospects for the fabrication of high-performance 3D-printed EESDs are outlined, aiming to provide valuable insights into this thriving field.