Photoinduced Electron Donor Acceptor Complex-Enabled α-C(sp3)-H Alkenylation of Amines.

Allylic amines are prevalent and vital structural components present in many bioactive compounds and natural products. Additionally, they serve as valuable intermediates and building blocks, with wide-ranging applications in organic synthesis. However, direct α-C(sp3)-H alkenylation of feedstock amines, particularly for the preparation of α-alkenylated cyclic amines, has posed a longstanding challenge. Herein, we present a general, mild, operationally simple, and transition-metal-free α-alkenylation of various readily available amines with alkenylborate esters in excellent E/Z - and diastereoselectivities. This method features good compatibility with water and oxygen, broad substrate scope, and excellent functional group tolerance, thereby enabling the late-stage modification of various complex molecules. Mechanistic studies suggest that the formation of a photoactive electron donor-acceptor complex between 2-iodobenzamide and the tetraalkoxyborate anion, which subsequently undergoes photoinduced single electron transfer and intramolecular 1,5-hydrogen atom transfer to generate the crucial α-amino radicals, is the key to success of this chemistry.

Edge-Topological Regulation for in Situ Fabrication of Bridging Nanosensors.

In situ fabrication of well-defined bridging nanostructures is an interesting and unique approach to three-dimensionally design nanosensor structures, which are hardly attainable by other methods. Here, we demonstrate the significant effect of edge-topological regulation on in situ fabrication of ZnO bridging nanosensors. When employing seed layers with a sharp edge, which is a well-defined structure in conventional lithography, the bridging angles and electrical resistances between two opposing electrodes were randomly distributed. The stochastic nature of bridging growth direction at the sharp edges inherently causes such unintentional variation of structural and electrical properties. We propose an edgeless seed layer structure using a two-layers resist method to solve the above uncontrollability of bridging nanosensors. Such bridging nanosensors not only substantially improved the uniformity of structural and electrical properties between two opposing electrodes but also significantly enhanced the sensing responses for NO2 with the smaller variance and the lower limit of detection via in situ controlled electrical contacts.

Photoinduced Copper-Catalyzed Asymmetric C(sp3 )-H Alkynylation of Cyclic Amines by Intramolecular 1,5-Hydrogen Atom Transfer.

The development of a mild and general method for C(sp3 )-H functionalization of cyclic amines has been an ongoing challenge. In this work, we describe the copper-catalyzed enantioselective C(sp3 )-H alkynylation of unactivated cyclic 2-iodo-benzamide under photo-irradiation by intramolecular 1,5-hydrogen atom transfer (HAT). The employment of a new bisoxazoline diphenylamine ligand, in conjunction with 1,1'-bi-2-naphthol, which significantly improved the reduction potential of the copper complex, was the key to success of this chemistry. Mechanistic and computational studies supported that the new copper complex served the dual role as a photoredox and coupling catalyst, the reaction went through a radical process, and the intramolecular 1,5-HAT process was involved in the rate-limiting step. Apart from the broad substrate scope including unprecedented benzocyclic amines, this method also showed excellent diastereoselectivity in 2-monosubstituted cyclic amines via substrate control.

Image Processing and Machine Learning for Automated Identification of Chemo-/Biomarkers in Chromatography-Mass Spectrometry.

We present a method named NPFimg, which automatically identifies multivariate chemo-/biomarker features of analytes in chromatography-mass spectrometry (MS) data by combining image processing and machine learning. NPFimg processes a two-dimensional MS map (m/z vs retention time) to discriminate analytes and identify and visualize the marker features. Our approach allows us to comprehensively characterize the signals in MS data without the conventional peak picking process, which suffers from false peak detections. The feasibility of marker identification is successfully demonstrated in case studies of aroma odor and human breath on gas chromatography-mass spectrometry (GC-MS) even at the parts per billion level. Comparison with the widely used XCMS shows the excellent reliability of NPFimg, in that it has lower error rates of signal acquisition and marker identification. In addition, we show the potential applicability of NPFimg to the untargeted metabolomics of human breath. While this study shows the limited applications, NPFimg is potentially applicable to data processing in diverse metabolomics/chemometrics using GC-MS and liquid chromatography-MS. NPFimg is available as open source on GitHub (http://github.com/poomcj/NPFimg) under the MIT license.

Maximizing Conversion of Surface Click Reactions for Versatile Molecular Modification on Metal Oxide Nanowires.

Click reactions (e.g., Huisgen cycloaddition) on metal oxide nanostructures offer a versatile and robust surface molecular modification for various applications because they form strong covalent bonds in a wide range of molecular substrates. This study reports a rational strategy to maximize the conversion rate of surface click reactions on single-crystalline ZnO nanowires by monitoring the reaction progress. p-Polarized multiple-angle incidence resolution spectrometry (pMAIRS) and Fourier-transformed infrared (FT-IR) spectroscopy were employed to monitor the reaction progress of an azide-terminated self-assembled monolayer (SAM) on single-crystalline ZnO nanowires. Although various reaction parameters including the concentration of Cu(I) catalysts, triazolyl ligands, solvents, and target alkynes were systematically examined for the surface click reactions, 10-30% of terminal azide on the nanowire surface remained unreacted. Temperature-dependent FT-IR measurements revealed that such unreacted residual azides deteriorate the thermal stability of the nanowire molecular layer. To overcome this observed conversion limitation of click reactions on nanostructure surfaces, we considered the steric hindrance around the closely packed SAM reaction points, then experimented with dispersing the azide moiety into a methyl-terminated SAM. The mixed-SAM method significantly improved the azide conversion rate to almost 100%. This reaction method enables the construction of spatially patterned molecular surface modifications on metal oxide nanowire arrays without detrimental unreacted azide groups.

Nanowire-based sensor electronics for chemical and biological applications.

Detection and recognition of chemical and biological species via sensor electronics are important not only for various sensing applications but also for fundamental scientific understanding. In the past two decades, sensor devices using one-dimensional (1D) nanowires have emerged as promising and powerful platforms for electrical detection of chemical species and biologically relevant molecules due to their superior sensing performance, long-term stability, and ultra-low power consumption. This paper presents a comprehensive overview of the recent progress and achievements in 1D nanowire synthesis, working principles of nanowire-based sensors, and the applications of nanowire-based sensor electronics in chemical and biological analytes detection and recognition. In addition, some critical issues that hinder the practical applications of 1D nanowire-based sensor electronics, including device reproducibility and selectivity, stability, and power consumption, will be highlighted. Finally, challenges, perspectives, and opportunities for developing advanced and innovative nanowire-based sensor electronics in chemical and biological applications are featured.

Field Test and Numerical Simulation on the Long-Term Thermal Response of PHC Energy Pile in Layered Foundation.

Investigation on the long-term thermal response of precast high-strength concrete (PHC) energy pile is relatively rare. This paper combines field experiments and numerical simulations to investigate the long-term thermal properties of a PHC energy pile in a layered foundation. The major findings obtained from the experimental and numerical studies are as follows: First, the thermophysical ground properties gradually produce an influence on the long-term temperature variation. For the soil layers with relatively higher thermal conductivity, the ground temperature near to the energy pile presents a slowly increasing trend, and the ground temperature response at a longer distance from the center of the PHC pile appears to be delayed. Second, the short- and long-term thermal performance of the PHC energy pile can be enhanced by increasing the thermal conductivity of backfill soil. When the thermal conductivities of backfill soil in the PHC pile increase from 1 to 4 W/(m K), the heat exchange amounts of energy pile can be enhanced by approximately 30%, 79%, 105%, and 122% at 1 day and 20%, 47%, 59%, and 66% at 90 days compared with the backfill water used in the site. However, the influence of specific heat capacity of the backfill soil in the PHC pile on the short-term or long-term thermal response can be ignored. Furthermore, the variation of the initial ground temperature is also an important factor to affect the short-and-long-term heat transfer capacity and ground temperature variation. Finally, the thermal conductivity of the ground has a significant effect on the long-term thermal response compared with the short-term condition, and the heat exchange rates rise by about 5% and 9% at 1 day and 21% and 37% at 90 days as the thermal conductivities of the ground increase by 0.5 and 1 W/(m K), respectively.

Synthesis of Monodispersedly Sized ZnO Nanowires from Randomly Sized Seeds.

We demonstrate the facile, rational synthesis of monodispersedly sized zinc oxide (ZnO) nanowires from randomly sized seeds by hydrothermal growth. Uniformly shaped nanowire tips constructed in ammonia-dominated alkaline conditions serve as a foundation for the subsequent formation of the monodisperse nanowires. By precisely controlling the sharp tip formation and the nucleation, our method substantially narrows the distribution of ZnO nanowire diameters from σ = 13.5 nm down to σ = 1.3 nm and controls their diameter by a completely bottom-up method, even initiating from randomly sized seeds. The proposed concept of sharp tip based monodisperse nanowires growth can be applied to the growth of diverse metal oxide nanowires and thus paves the way for bottom-up grown metal oxide nanowires-integrated nanodevices with a reliable performance.

Light-Promoted Copper-Catalyzed Enantioselective Alkylation of Azoles.

A catalytic asymmetric alkylation of azoles with secondary 1-arylalkyl bromides through direct C-H functionalization is reported. Under blue-light photoexcitation, a copper(I)/carbazole-based bisoxazoline (CbzBox) catalytic system exhibits good reactivity and high stereoselectivity, thus offering an efficient strategy for the construction of chiral alkyl azoles. These reactions proceed at low temperature and are compatible with a wide range of azoles.

Photoinduced Decarboxylative Amino-Fluoroalkylation of Maleic Anhydride.

A photoinduced decarboxylative three-component coupling reaction involving amine, maleic anhydride, and fluorinated alkyl iodides has been developed, leading to synthetically valuable fluoroalkyl-containing acrylamides with a high E selectivity. A broad array of substrates including monoprotected amino acid are capable coupling partners. Preliminary mechanistic studies suggest a stepwise process. This reaction represents the first example of photoinduced decarboxylative difunctionalization of maleic anhydride.

Unusual Oxygen Partial Pressure Dependence of Electrical Transport of Single-Crystalline Metal Oxide Nanowires Grown by the Vapor-Liquid-Solid Process.

In general, the electrical conductivities of n-type semiconducting metal oxide nanostructures increase with the decrease in the oxygen partial pressure during crystal growth owing to the increased number of crystal imperfections including oxygen vacancies. In this paper, we report an unusual oxygen partial pressure dependence of the electrical conductivity of single-crystalline SnO2 nanowires grown by a vapor-liquid-solid (VLS) process. The electrical conductivity of a single SnO2 nanowire, measured using the four-probe method, substantially decreases by 2 orders of magnitude when the oxygen partial pressure for the crystal growth is reduced from 10-3 to 10-4 Pa. This contradicts the conventional trend of n-type SnO2 semiconductors. Spatially resolved single-nanowire electrical transport measurements, microstructure analysis, plane-view electron energy-loss spectroscopy, and molecular dynamics simulations reveal that the observed unusual oxygen partial pressure dependence of the electrical transport is attributed to the intrinsic differences between the two crystal growth interfaces (LS and VS interfaces) in the critical nucleation of the crystal growth and impurity incorporation probability as a function of the oxygen partial pressure. The impurity incorporation probability at the LS interface is always lower than that at the VS interface, even under reduced oxygen partial pressures.

Rational Method of Monitoring Molecular Transformations on Metal-Oxide Nanowire Surfaces.

Metal-oxide nanowires have demonstrated excellent capability in the electrical detection of various molecules based on their material robustness in liquid and air environments. Although the surface structure of the nanowires essentially determines their interaction with adsorbed molecules, understanding the correlation between an oxide nanowire surface and an adsorbed molecule is still a major challenge. Herein, we propose a rational methodology to obtain this information for low-density molecules adsorbed on metal oxide nanowire surfaces by employing infrared p-polarized multiple-angle incidence resolution spectroscopy and temperature-programmed desorption/gas chromatography-mass spectrometry. As a model system, we studied the surface chemical transformation of an aldehyde (nonanal, a cancer biomarker in breath) on single-crystalline ZnO nanowires. We found that a slight surface reconstruction, induced by the thermal pretreatment, determines the surface chemical reactivity of nonanal. The present results show that the observed surface reaction trend can be interpreted in terms of the density of Zn ions exposed on the nanowire surface and of their corresponding spatial arrangement on the surface, which promotes the reaction between neighboring adsorbed molecules. The proposed methodology will support a better understanding of complex molecular transformations on various nanostructured metal-oxide surfaces.

Copper-Catalyzed Enantioselective Sonogashira Type Coupling of Alkynes with α-Bromoamides.

An asymmetric copper-catalyzed Sonogashira type coupling between alkynes and α-bromoamides has been developed. This method represents a facile approach to synthetically useful ß, γ-alkynyl amides from two readily available starting materials in a highly enantioselective manner. A Bisoxazoline diphenylanaline (BOPA) serves as the effective chiral ligand. Preliminary mechanistic studies support the formation of alkyl radical species .

Silver-catalyzed synthesis of ß-fluorovinylphosphonates by phosphonofluorination of aromatic alkynes.

A silver-catalyzed three-component reaction involving alkynes, Selectfluor®, and diethyl phosphite was employed for the one-pot formation of C(sp2)-F and C(sp2)-P bonds to provide an efficient access to ß-fluorovinylphosphonates in a highly regio- and stereoselective manner under mild reaction conditions. This reaction is operationally simple and offers an excellent functional group tolerance as well as a broad substrate scope that includes both terminal and internal alkynes. The reaction proceeded through the oxidative generation of a P-centered radical and subsequent fluorine atom transfer.

Enantioselective 1,2-Difunctionalization of 1,3-Butadiene by Sequential Alkylation and Carbonyl Allylation.

A highly enantioselective three-component coupling of 1,3-butadiene with a variety of fluorinated or nonfluorinated alkyl halides and aldehydes has been achieved relying on a Cr/Co bimetallic catalysis system. The strategy established here facilitates straightforward introduction of the privileged fluoro functionalities into homoallylic alcohols from bulk feedstock materials in a highly anti-diastereo and enantioselective manner.

True Vapor-Liquid-Solid Process Suppresses Unintentional Carrier Doping of Single Crystalline Metal Oxide Nanowires.

Single crystalline nanowires composed of semiconducting metal oxides formed via a vapor-liquid-solid (VLS) process exhibit an electrical conductivity even without an intentional carrier doping, although these stoichiometric metal oxides are ideally insulators. Suppressing this unintentional doping effect has been a challenging issue not only for metal oxide nanowires but also for various nanostructured metal oxides toward their semiconductor applications. Here we demonstrate that a pure VLS crystal growth, which occurs only at liquid-solid (LS) interface, substantially suppresses an unintentional doping of single crystalline SnO2 nanowires. By strictly tailoring the crystal growth interface of VLS process, we found the gigantic difference of electrical conduction (up to 7 orders of magnitude) between nanowires formed only at LS interface and those formed at both LS and vapor-solid (VS) interfaces. On the basis of investigations with spatially resolved single nanowire electrical measurements, plane-view electron energy-loss spectroscopy, and molecular dynamics simulations, we reveal the gigantic suppression of unintentional carrier doping only for the crystal grown at LS interface due to the higher annealing effect at LS interface compared with that grown at VS interface. These implications will be a foundation to design the semiconducting properties of various nanostructured metal oxides.

Expedient Synthesis of 1,5-Diketones by Rhodium-Catalyzed Hydroacylation Enabled by C-C Bond Cleavage.

A rhodium-catalyzed intermolecular hydroacylation reaction of vinyl cyclobutanols with non-chelating aldehydes has been developed. This reaction offers a new and atom-economical approach for the selective preparation of 1,5-diketones in high yields. Experimental data suggest a sequential ring-opening, transfer hydrogenation, and hydroacylation mechanism. We propose that aldehyde decarbonylation is avoided by the formation of a novel rhodium enolate species that also accounts for the compatibility of a broad range of aldehydes and its anti-Markovnikov selectivity.

A data-driven weighting scheme for multivariate phenotypic endpoints recapitulates zebrafish developmental cascades.

Zebrafish have become a key alternative model for studying health effects of environmental stressors, partly due to their genetic similarity to humans, fast generation time, and the efficiency of generating high-dimensional systematic data. Studies aiming to characterize adverse health effects in zebrafish typically include several phenotypic measurements (endpoints). While there is a solid biomedical basis for capturing a comprehensive set of endpoints, making summary judgments regarding health effects requires thoughtful integration across endpoints. Here, we introduce a Bayesian method to quantify the informativeness of 17 distinct zebrafish endpoints as a data-driven weighting scheme for a multi-endpoint summary measure, called weighted Aggregate Entropy (wAggE). We implement wAggE using high-throughput screening (HTS) data from zebrafish exposed to five concentrations of all 1060 ToxCast chemicals. Our results show that our empirical weighting scheme provides better performance in terms of the Receiver Operating Characteristic (ROC) curve for identifying significant morphological effects and improves robustness over traditional curve-fitting approaches. From a biological perspective, our results suggest that developmental cascade effects triggered by chemical exposure can be recapitulated by analyzing the relationships among endpoints. Thus, wAggE offers a powerful approach for analysis of multivariate phenotypes that can reveal underlying etiological processes.

High-throughput characterization of chemical-associated embryonic behavioral changes predicts teratogenic outcomes.

New strategies are needed to address the data gap between the bioactivity of chemicals in the environment versus existing hazard information. We address whether a high-throughput screening (HTS) system using a vertebrate organism (embryonic zebrafish) can characterize chemical-elicited behavioral responses at an early, 24 hours post-fertilization (hpf) stage that predict teratogenic consequences at a later developmental stage. The system was used to generate full concentration-response behavioral profiles at 24 hpf across 1060 ToxCast™ chemicals. Detailed, morphological evaluation of all individuals was performed as experimental follow-up at 5 days post-fertilization (dpf). Chemicals eliciting behavioral responses were also mapped against external HTS in vitro results to identify specific molecular targets and neurosignalling pathways. We found that, as an integrative measure of normal development, significant alterations in movement highlighted active chemicals representing several modes of action. These early behavioral responses were predictive for 17 specific developmental abnormalities and mortality measured at 5 dpf, often at lower (i.e., more potent) concentrations than those at which morphological effects were observed. Therefore, this system can provide rapid characterization of chemical-elicited behavioral responses at an early developmental stage that are predictive of observable adverse effects later in life.

Assessing multi-variable coupling effects of UV illumination, heat and oxygen on porous ZnO nanocrystalline film through electron concentration and mobility extraction.

Porous ZnO nanocrystalline films have been widely used in optoelectronic and gas-sensing applications. However, the effect mechanisms of the external fields, such as light, heat and atmosphere, are still controversial. In this work, the multi-variable coupling effects of the UV light, heat and oxygen were thoroughly studied by a newly proposed method, the central idea of which was to first isolate each effect of the fields on electron concentration and mobility, and then analyze how the coupling effects were achieved. Our results revealed the important roles of oxygen adsorption-induced interface barriers and photo-assisted thermal ionization first proposed here, because of which the positive coupling effect of UV light/heat and oxygen, as well as the negative coupling effect of UV light and heat was observed. Our work provides inspiration for studies on metal oxides from both the whole idea and the detailed argument.