Neodymium-Mediated Coordinative Chain Transfer Polymerization of Isoprene in the Presence of External Donors.

Nd-based polydiene elastomers, including NdIR and NdBR, are regarded as indispensable key raw materials in preparing green tires with excellent performance capabilities, but their wide application is still limited by the relative higher cost of Nd precatalysts. Nd-mediated coordinative chain transfer polymerization (CCTP) of diene provides an effective strategy to reduce the precatalyst cost, because this method involves very high atom economy, i.e., each Nd molecule can generate multiple polymer chains. Nevertheless, all possible factors that could influence such CCTP behaviors are still mostly unexplored to date. In this report, the basic chemistry on the influence of external donors on the overall CCTP behaviors of isoprene was established for the first time. It was found that increasing the amount of external donors had a negative influence on the chain transfer efficiencies, resulting in gradually decreasing atom economies. Catalyst addition order studies revealed that the coordination of donors with cationic Nd active species, rather than alkylaluminium CTAs, contributed mostly to such decreased efficiencies. Moreover, it was found that when the ratio of donors and Nd compounds was higher than 1.0, the CCTP behaviors were corrupted, resulting in polymers with broad distributions, as well as resulting in low atom economies; nevertheless, when the ratio was lower than 0.5, the system still displayed CCTP characteristics, implying that the critical ratio for maintaining the CCTP was 0.5. Additionally, when such a ratio was 0.01, the high atom economy was almost the same as donor-free CCTP systems. Detailed kinetic studies at such a ratio demonstrated that the donor-contained system proceeded in a well-controlled manner, as concluded from the good linear relationship between the Mn of the PIps against the polymer yields, as well as the good linearity between the Mn against the (IP)/(Nd) ratios. Such maintained CCTP properties also allowed for seeding two-step polymerizations to prepare diblock copolymers with precisely controlled molecular weights. Expanding the types of donors to more phosphine, oxygen, and nitrogen containing compounds showed that they also affected the CCTP behaviors depending on their steric and electronic properties.

Boosting the Thermal Stability of α-Diimine Palladium Complexes in Norbornene Polymerization from Construction of Intraligand Hydrogen Bonding and Simultaneous Increasing Axial/Equatorial Bulkiness.

Increasing the thermostability of α-diimine late-transition-metal complexes and therefore rendering them more active at higher temperatures is of great importance, yet challenging for the olefin polymerization field. In the present research, a new family of α-diimine palladium complexes that can promote norbornene polymerization at high temperatures (up to 140 °C) is disclosed. Because of the conformational restriction caused by increasing the axial and equatorial bulkiness as well as the presence of intraligand H···F hydrogen bonds, N-aryl rotations can be efficiently restricted, therefore circumventing the deactivation of the active species at high temperatures. At 80-140 °C, these complexes can efficiently catalyze norbornene homopolymerizations, giving high catalytic activities up to 5.65 × 107 g of PNB per mole Ni per hour and polymers with high molecular weights up to 37.2 × 104 g/mol, which are highly superior to catalytic systems mediated by CF3-free complexes. Moreover, these complexes could also afford medium catalytic activities in the presence of polar 5-norbornene-2-carboxylic acid methyl ester (NB-COOCH3).

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange.

The intrinsic poor thermal stability of layered LiNixCoyMn1-x-yO2 (NCM) cathodes and the exothermic side reactions triggered by the associated oxygen release are the main safety threats for their large-scale implantation. In the NCM family, it is widely accepted that Ni is the stability troublemaker, while Mn has long been considered as a structure stabilizer, whereas the role of Co remains elusive. Here, via Co/Mn exchange in a Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode, we demonstrate that the chemical and structural stability of the deep delithiated NCM cathodes are significantly dominated by Co rather than the widely reported Mn. Operando synchrotron X-ray characterization coupling with in situ mass spectrometry reveal that the Co4+ reduces prior to the reduction of Ni4+ and could thus prolong the Ni migration by occupying the tetrahedra sites and, hence, postpone the oxygen release and thermal failure. In contrast, the Mn itself is stable, but barely stabilizes the Ni4+. Our results highlight the importance of evaluating the intrinsic role of compositional tuning on the Ni-rich/Co-free layered oxide cathode materials to guarantee the safe operation of high-energy Li-ion batteries.

Biallelic mutations of CFAP74 may cause human primary ciliary dyskinesia and MMAF phenotype.

Primary ciliary dyskinesia (PCD) is a rare genetic disorder characterized by recurrent respiratory infections, nasosinusitis, tympanitis, and/or male infertility, all of which can severely impair the patient's quality of life. Multiple morphological abnormalities of the sperm flagella (MMAF) is one type of severe teratozoospermia and results from a variety of flagellar defects. In this study, we conducted whole-exome sequencing to identify and evaluate the genetic lesions in two patients with potential PCD and MMAF. Biallelic mutations in exon 10, c.983G>A; p.(Gly328Asp), and exon 29, c.3532G>A; p.(Asp1178Asn), of the CFAP74 (NM_001304360) gene were identified in patient 1 (P1), and biallelic mutations in exon 7, c.652C>T; p.(Arg218Trp), and exon 35, c. 4331G>C; p.(Ser1444Thr), of the same gene were identified in patient 2 (P2). Bioinformatic analysis suggested that these variants may be disease causing. Immunofluorescence confirmed that CFAP74 was absent in these patients' sperm samples. Intracytoplasmic sperm injection (ICSI) was carried out for P1, and his wife became pregnant after embryo transfer and gave birth to a healthy baby. To the best of our knowledge, this study is the first to identify the importance of CFAP74 in potential PCD and MMAF, contributing to the genetic diagnosis of these disorders and helping to predict pregnancy outcomes relevant in in vitro fertilization.

Loss-of-function mutations in centrosomal protein 112 is associated with human acephalic spermatozoa phenotype.

Acephalic spermatozoa, characterized by the headless sperm in the ejaculate, is a rare type of teratozoospermia. Here, we recruited two infertile patients with an acephalic spermatozoa phenotype to investigate the genetic pathology of acephalic spermatozoa. Whole-exome sequencing analysis was performed and found mutations in CEP112 in the two patients: homozygous mutation c.496C > T:p.(Arg166X) in exon 5 from P1; and the biallelic mutations c.2074C > T:p.(Arg692Trp) in exon 20 and c.2104C > T:p.(Arg702Cys) in exon 20 from P2. Sanger sequencing confirmed the CEP112 mutations in the two patients. In silico analysis revealed that these CEP112 mutations are deleterious and rare, and all the mutations impact the coiled-coil domain of CEP112, which may affect the protein function. The c.496C > T:p.Arg166X resulted in a truncated CEP112, which was verified by the mutation expression plasmid. The CEP112 expression was significantly reduced in the P2, suggesting the biallelic mutations c.2074C > T and c.2104C > T may affect the function and stability of CEP112. Therefore, we speculate that the loss-of-function mutations in CEP112 may be account for the human acephalic spermatozoa phenotype.

Tumor-pH-Sensitive PLLA-Based Microsphere with Acid Cleavable Acetal Bonds on the Backbone for Efficient Localized Chemotherapy.

Nanoparticle- and microsphere-based drug delivery systems (DDSs) have attracted wide attention in cancer therapy; those DDSs that are responsive to tumor environment can selectively identify tumor and normal tissues and therefore have shown enhanced anticancer efficacy and alleviated systemic toxicity. Here, tumor-pH-sensitive polymeric microspheres, which are prepared by multiblock poly(l-lactide) with pH-sensitive acetal bonds in the backbone, are employed to efficiently load water-soluble anticancer drug doxorubicin hydrochloride (DOX·HCl, drug loading content: ∼10%). The pH-sensitive DOX-loaded hollow microspheres were in the size range 2-10 µm and exhibited acid-accelerated degradation of polymer matrix and drug release, and thereby efficient in vitro cancer cell inhibition. The microspheres were further intratumorally injected into breast-tumor-bearing mice, and the in vivo anticancer experiment showed that pH-sensitive DOX-loaded microsphere showed better antitumor efficiency and prolonged life-span than its counterpart that does not have pH-responsive property. Moreover, negligible organ toxicity, especially cardiotoxicity that generally exists in DOX-involved chemotherapy where DOX is administrated by intravenous injection, was observed for DOX-loaded microspheres. Hence, tumor-pH-sensitive polymeric microspheres have appeared to be a simple and efficient platform for delivering hydrophilic anticancer drug with excellent anticancer efficacy and low systemic toxicity.

Cinnamaldehyde-Based Poly(ester-thioacetal) To Generate Reactive Oxygen Species for Fabricating Reactive Oxygen Species-Responsive Nanoparticles.

Due to the high oxidative stress of the tumor microenvironment, more and more researchers have been devoted to reactive oxygen species (ROS)-responsive nanodrug delivery systems for anticancer therapy. Herein, a ROS-responsive moiety, thioacetal, was synthesized, and cinnamaldehyde (CA) was introduced in the polymer chain to trigger the generation of ROS to expect the enhancement of the ROS-responsive effect. The poly(ester-thioacetal) mPEG2k - b-(NTA-HD)12 polymer, its self-assembled micelles, and the ROS-responsive behavior were characterized by 1H NMR and DLS. The anticancer drug doxorubicin (DOX) was adopted to prepare DOX-loaded poly(ester-thioacetal) micelles. The intracellular ROS detection indicated that the mPEG2k - b-(NTA-HD)12 polymer could degrade via the high concentration of ROS in cancer cells, and the released CA stimulated mitochondria to regenerate additional ROS. The flow cytometry results indicated that the ROS-responsive polymeric micelles showed faster cellular uptake compared to the control mPEG2k - b-PCL5k micelles. The ROS responsive DOX/mPEG2k - b-(NTA-HD)12 micelles exhibited much better anticancer efficiency on both 4T1 and HeLa cancer cells than DOX/mPEG2k - b-PCL5k micelles.

Polymerization of Isoprene Promoted by Aminophosphine(ory)-Fused Bipyridine Cobalt Complexes: Precise Control of Molecular Weight and cis-1,4- alt-3,4 Sequence.

Ligands N-(dialkyl or arylphosphino)-(2,2'-bipyridin)-6-amine (L1, aryl = Ph; L2, alkyl = tBu; L3, alkyl = adamantyl (Ad)) as well as the corresponding oxidized N-(2,2'-bipyridin-6-yl)- P, P-dialkyl or aryl phosphinic amide (L4, aryl = Ph; L5, alkyl = tBu; L6, alkyl = Ad) congeners were designed and coordinated to cobalt dichloride. The structures of formed complexes were characterized by IR and elemental analyses, as well as characterizations of the X-ray diffractions for complexes Co4 and Co6, which revealed the cobalt center is expectedly pentacoordinated in a distorted trigonal bipyramidal configuration with a prolonged Co-O(═P) bond . In combination with MMAO, complex Co2 was highly active in cis-1,4- alt-3,4 enchained polymerization. The hemilabile nature of O═P is possible for the alternating η4- cis-1,4 and η2-3,4 coordination, and insertion at the metal-carbon bond ensued. In combination with AlEt2Cl, each of complexes Co4, Co5, and Co6 was capable of converting isoprene to polyisoprene in a control mode with observed polymerization rate constants ( kobs = 0.1531 L mol-1 min-1 (Co4), 0.1382 L mol-1 min-1 (Co5), and 0.0902 L mol-1 min-1 (Co6)). The activation energy of the polymerization by Co4 falls in the range of 27-31 kJ/mol by determining kobs values at 0, 30, and 50 °C. The 13C NMR analyses of the obtained polyisoprene revealed that complexes Co4, Co5, and Co6 have a cis-1,4 selectivity of 86.6-93.4% with a 3,4 selectivity of 6.6-13.4%. This catalyst system can also be applied to block copolymerization of isoprene and myrcene in a living cis-1,4 fashion; therefore, a new biosourced monomer-based elastomer has been achieved.

Preparation of Octadecylamine-Graphene/MgCl2-Supported Ziegler-Natta Catalyst and Its Application in Ethylene Polymerization.

A facile coagglomeration method for preparing a long alkyl chain modified graphene oxide (MGO)/MgCl2-supported Ti-based Ziegler-Natta catalyst was reported. The effects of MGO on the catalyst morphology and activity for ethylene polymerization were examined. The resultant polyethylene (PE)/MGO nanocomposites exhibited a layered morphology, with the MGO fillers being well dispersed and exhibiting strong interfacial adhesion to the PE matrix. The thermal stability and mechanical properties of the PE were significantly enhanced with the introduction of a small amount of the MGO filler. Thus, this work provides a facile approach to the production of high-performance PE.

Synthesis and Characterization of Polyethylene/Starch Nanocomposites: A Spherical Starch-Supported Catalyst and In Situ Ethylene Polymerization.

In the present article, a novel spherical starch-supported vanadium (V)-based Ziegler-Natta catalyst was synthesized. The active centers of the obtained catalyst well dispersed in the starch through the SEM-EDX analysis. The effects of reaction conditions on ethylene polymerization were studied. The synthesized catalyst exhibited high activity toward ethylene polymerization in the presence of ethylaluminium sesquichloride (EASC) cocatalyst. Interestingly, the fiber shape PE was obtained directly during the polymerization process.

Preparation of Au Nanoparticles Immobilized Cross-Linked Poly(4-vinylpyridine) Nanofibers and Their Catalytic Application for the Reduction of 4-Nitrophenol.

Catalytic nanofibers are prepared by the immobilization of Au nanoparticles (AuNPs) onto the surface of cross-linked electrospun poly(4-vinylpyridine) (P4VP) nanofibers. The crosslinking of the P4VP nanofibers by 1,4-diiodobutane via quaternization reaction greatly enhances the stability of the nanofibers against the solvent dissolution, which can then be used as promising platform for the immobilization of catalytic metal nanoparticles. The AuNPs immobilized cross-linked P4VP nanofibers have shown a good catalytic activity for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP).

Thermal-Robust Phenoxyimine Titanium Catalysts Bearing Bulky Sidearms for High Temperature Ethylene Homo-/Co- Polymerizations.

A family of titanium complexes (Ti1-Ti7) with the general formula LTiCl3, supported by tridentate phenoxyimine [O-NO] ligands (L1-L7) bearing bulky sidearms, were synthesized by treating the corresponding ligands with stoichiometric amount of TiCl4. All the ligands and complexes were well characterized by 1H and 13C NMR spectroscopies, in which ortho- methoxyl groups on N-aryl moieties shifted to downfield, corroborating the successful coordination reaction. Structural optimization by DFT calculations revealed that one of the phenyl groups on dibenzhydryl moiety could form π-π stacking interaction with the salicylaldimine plane, because of which the obtained titanium complexes revealed good thermal stabilities for high-temperature polymerization of ethylene. The thermal robustness of the complexes was closely related to the strength of π-π stacking interactions, which were mainly influenced by the substituents on the dibenzhydryl moieties; Ti1, Ti4 and Ti5 emerged as the three best-performing complexes at 110 °C. With the aid of such π-π stacking interactions, the complexes were also found to be active at >150 °C, although decreased activities were witnessed. Besides homopolymerizations, complexes Ti1-Ti7 were also found to be active for the high-temperature copolymerization of ethylene and 1-octene, but with medium incorporation percentage, demonstrating their medium copolymerization capabilities.

Preparation and Characterization of Soft-Hard Block Copolymer of 3,4-IP-b-s-1,2-PBD Using a Robust Iron-Based Catalyst System.

A series of well-defined diblock copolymers, namely, 3,4-polyisoprene-block-syndiotactic-1,2-polybutadiene (3,4-PI-b-s-1,2-PBD), with a soft-hard block sequence were synthesized via an in situ sequential polymerization process using a robust iron-based catalytic system Fe(acac)3/(isocyanoimino) triptenylphosphorane (IITP)/AliBu3. This catalyst exhibits vigorous activity and temperature tolerance, achieving a polymerization activity of 5.41 × 106 g mol(Fe)-1 h-1 at 70 °C with a [IP]/[Fe] ratio of 15,000. Moreover, the quasi-living polymerization characteristics of the catalyst were verified through kinetic experiments. The first-stage polymerization of isoprene (IP) is performed at 30 °C to give a soft 3,4-PI block, and then a quantitative amount of 1,3-butadiene was added in situ to the quasi-living polymerization system to produce a second hard s-1,2-PBD. The s-1,2-PBD segments in block copolymers display a rodlike morphology contrasting with the spherulitic morphology characteristic of s-1,2-PBD homopolymers. The precise tunability of the length of the soft and hard chain segments of these novel elastic materials with the feed ratio of IP and BD, endowing them with outstanding mechanical properties and excellent dynamic mechanical properties, which are expected to be promising high-performance rubber materials.

Efficient and well-controlled ring opening polymerization of biobased ethylene brassylate by α-diimine FeCl3 catalysts via a coordination-insertion mechanism.

A highly efficient late-transition metal based catalytic system of α-diimine FeCl3 for well-controlled ring opening polymerization of a cheap and biobased macrolactone, ethylene brassylate (EB), is described herein. Proceeding via a coordination-insertion mechanism, such a catalytic system is capable of demonstrating unprecedented higher activities than previously reported organocatalysts or main-group metal based catalysts. Moreover, benefiting from the bulky nature of the α-diimine ligands, transesterification side reactions can be greatly suppressed, allowing the polymerization to proceed in a well-controlled living manner, as revealed from detailed kinetic studies. Additionally, such a catalytic system was also workable for ring opening copolymerization of EB and ε-caprolactone (ε-CL), giving the desired random copolymers with various compositions.

Preparation and morphology of polyethylene/clay nanocomposite with novel MgCl2/montmorillonite (MMT) bi-supported Ziegler-Natta catalyst.

In the present article, the spherical and high activity TiCl4/MgCI2/MMT intercalated catalyst was successfully prepared. The active centers of obtained catalyst well dispersed in the MMT through electron probe micro-analysis (EPMA). The d-spacing of MMT was broadened from 0.97 nm to 1.42 nm after addition of MgCl2 and the space between MMT layers was 1.60 nm after treated with excess TiCl4. In addition, the catalyst shows a very high activity toward ethylene polymerization. During the ethylene polymerization, the MMT layers were exfoliated by the polymerization force arising from the propagation of ethylene chain. Interestingly, the macro-scale morphology of the obtained polyethylene (PE)/MMT nanocomposite still retained the spherical shape of precursor catalyst; while the PE particles contain MMT platelets take the shape of "flower petal" in the micro-scale. Transmission electron microscopy (TEM) photographs showed that the MMT homogeneously dispersed in the PE.

Preparation of superhydrophobic cross-linked syndiotactic 1,2-polybutadiene membranes by electrospinning.

In this study, syndiotactic 1,2-polybutadiene (s-PB)/azobisisobutyronitrile (AIBN) membranes were prepared via electrospinning. The obtained membranes were intensively investigated by contact angle analyzer, differential scanning calorimetry (DSC) and environmental scanning electron microscope (ESEM). With increasing the concentration of spinning solution, the obtained membranes were changed from hydrophobic to surperhydrophobic and the contact angle (CA) as high as 157 degrees at higher s-PB concentration. In addition, the s-PB/AIBN membrane cross-linked completely through heat treatment and superhydrophobic property of s-PB/AIBN membrane has not changed. The diameter of cross-linked fiber-based membrane was much thinner than that of the uncross-linked fibers.

In situ assembled titanium carbide-based heterojunctions for the synergistic enhancement of NIR-II photothermal/photodynamic therapy against breast cancer.

The combined use of photothermal therapy (PTT) and photodynamic therapy (PDT) could circumvent the drawbacks of each individual therapeutic strategy, resulting in an enhanced antitumor effect. However, the lack of highly effective photo-agents that are irradiation-safe in the biologically transparent window hinder the advancement of phototherapy clinically. Hence, in this study, a charge separation engineering strategy was adopted to fabricate a nanoplatform with heterojunctions, namely, in situ TiO2-loaded MXene (Ti3C2/TiO2 heterojunctions). This nanoplatform exhibited reduced bandgap (1.68 eV), enhanced NIR-II photothermal conversion efficiency (44.98%), and extended absorption edge compared to pristine TiO2 for enhanced photodynamic effect. More importantly, the proliferation of tumor cells could be efficiently inhibited at a 5 mm chicken breast depth after 1064 nm laser irradiation, and the intracellular ROS production significantly increased under 660 nm or even 1064 nm laser irradiation with heterojunctions (HJs) compared with that of TiO2. Moreover, the in vivo data further confirmed that the as-prepared heterojunctions could efficiently eradicate tumors efficiently via improved photothermal effect with NIR-II laser irradiation and upregulated ROS production. Collectively, the reported HJs strategy provides an opportunity for the success of combinational PTT and PDT therapy in tumor treatment.

Synthesis of Half-Titanocene Complexes Containing π,π-Stacked Aryloxide Ligands, and Their Use as Catalysts for Ethylene (Co)polymerizations.

A family of half-titanocene complexes bearing π,π-stacked aryloxide ligands and their catalytic performances towards ethylene homo-/co- polymerizations were disclosed herein. All the complexes were well characterized, and the intermolecular π,π-stacking interactions could be clearly identified from single crystal X-ray analysis, in which a stronger interaction could be reflected for aryloxides bearing bigger π-systems, e.g., pyrenoxide. Due to the formation of such interactions, these complexes were able to highly catalyze the ethylene homopolymerizations and copolymerization with 1-hexene comonomer, even without any additiveson the aryloxide group, which showed striking contrast to other half-titanocene analogues, implying the positive influence of π,π-stacking interaction in enhancing the catalytic performances of the corresponding catalysts. Moreover, it was found that addition of external pyrene molecules was capable of boosting the catalytic efficiency significantly, due to the formation of a stronger π,π-stacking interaction between the complexes and pyrene molecules.

cis-1,4 Selective Coordination Polymerization of 1,3-Butadiene and Copolymerization with Polar 2-(4-Methoxyphenyl)-1,3-butadiene by Acenaphthene-Based α-Diimine Cobalt Complexes Featuring Intra-Ligand π-π Stacking Interactions.

Highly cis-1,4 selective (up to 98%) coordination-insertion polymerization of 1,3-butadiene (BD) has been achieved herein using acenaphthene-based α-diimine cobalt complexes. Due to the presence of intra-ligand π-π stacking interactions, the complexes revealed high thermostability, affording polybutadiene products in high yields. Moreover, all of the obtained polymers possessed a relatively narrow molecular weight distribution as well as high molecular weight (up to 92.2 × 104 Dalton). The molecular weights of the resultant polybutadienes could be finely tuned by varying polymerization parameters, including temperature, Al/Co ratio, etc. Moreover, the copolymerization of butadiene with polar monomer 2-(4-methoxyphenyl)-1,3-butadiene (2-MOPB) was also successfully realized to produce a type of polar cis-1,4 polybutadiene (cis-1,4 content: up to 98.1%) with a range of 2-MOPB content (0.46-1.83%). Water contact angle measurements indicated that the insertion of a polar monomer into a polymer chain could significantly improve the polymer's surface property.

Fabrication of porous polymer coating layers with selective wettability on filter papers via the breath figure method and their applications in oil/water separation.

A comb-like amphiphilic polymer (PBTF), composed of hydrophobic backbones and hydrophilic side chains, was employed to grow honeycomb coating layers in situ on a filter paper via directly casting a polymer solution and by the subsequent dynamic breath figure (BF) method. Through regulating the hydrophilic polymer side chain density and the solution concentration, a continuous honeycomb coating layer contouring to the filter paper surface profile, in addition to possessing a water contact angle (WCA) as high as 146°, was successfully fabricated. The present study also finds that increasing the hydrophilic side chain density will turn PBTF into a surfactant-like polymer, and thus, endow the PBTF solution with the capacity of numerous micro-nano-sized water droplets, rather than simply stabilizing the ordered water droplet arrays on the surface of the solution. With vast nano-sized water droplets in it, the once transparent PBTF solution changed into a translucent nano-emulsion, which demonstrates a strong Tyndall effect. While casting such nano-emulsion on a filter paper and then subjecting to the BF process, the polymeric solute takes both nano-emulsion intrinsic nano-sized water droplets and solvent evaporation-induced water droplets as templates and self-assembles into a bird-nest-like three-dimensional porous microstructure, which possesses micro-nano-sized communicating pores. By regulating the water content in the nano-emulsion, the bird-nest-like structure can be uniformly formed on the surface of the filter paper, which revealed a WCA of 152°. The coated filter papers possess selective wettability, and meanwhile, maintain the inherent permeability of the substrates, which therefore can be directly utilized as oil/water separation materials.