The Role of Grain Boundaries on Ion Migration and Charge Recombination in Halide Perovskites.

Grain boundaries (GBs) have a significant role in polycrystalline perovskite solar cells (PSCs). However, there is ongoing debate regarding the impact of GBs on the performance and long-term stability of PSCs. Employing the first-principles molecular dynamics for perovskites, the iodine vacancy defect migrations both in bulk and at GBs are investigated. i) The positive iodine vacancy (VI +) is found that have both lower formation energy (1.4 eV) and activation energy (0.18 eV) than those of neutral iodine vacancy (VI), statistically. It indicated the VI + acts as the dominant migrated iodine vacancy rather than VI; ii) the iodine vacancy at GBs has ≈0.48 eV higher activation energy than those in bulk, which leads to the accumulation of iodine vacancy at GBs; iii) the presence of VI + result in a 3-fold increase in charge recombination ratio at GBs, compared to pristine PSCs. Based on quantum molecular dynamics statistical results, which are consistent with experimental measurements, insights into iodine vacancy migration both at GBs and in the bulk are gained. This understanding can be valuable for defects engineering related to ion migration, in order to improve the long-term stability and promote the performance of PSCs.

LIM and Cysteine-Rich Domains 1 Promotes Transforming Growth Factor ß1-Induced Epithelial-Mesenchymal Transition in Human Kidney 2 Cells.

Renal fibrosis is the major pathologic manifestation of chronic kidney disease (CKD). LIM and cysteine-rich domains 1 (LMCD1) is upregulated in the kidney tissue from patients with CKD and the transforming growth factor ß1 (TGF-ß1)-treated human renal tubular epithelial cell line human kidney 2 (HK-2) (Gene Expression Omnibus: GSE66494 and GSE23338). Previously, we have demonstrated that the knockdown of LMCD1 ameliorated renal fibrosis in mice by blocking the activation of the extracellular signal-regulated kinase pathway. In this study, we sought to further investigate whether LMCD1 affects TGF-ß1-induced epithelial-mesenchymal transition (EMT) of kidney tubular epithelial cells and its potential role in the TGF-ß1/Smad signaling pathway. First, we confirmed that LMCD1 expression was increased in the fibrotic kidneys of patients with CKD compared with that in normal kidneys and that LMCD1 was predominantly localized in the renal tubules. LMCD1 and mesenchymal markers were upregulated in obstructed kidney tissues of mice at 21 days after unilateral ureteral obstruction surgery compared with the tissues in sham mice. Next, we demonstrated that TGF-ß1 significantly increased LMCD1 expression through Smad-mediated transcription in HK-2 cells in vitro. In turn, LMCD1 acted as a transcriptional coactivator of E2F transcription factor 1 to promote the transcription of TGF-ß1. Moreover, TGF-ß1 increased the interaction between LMCD1 and Smad ubiquitination regulatory factor 2 (Smurf2) and accelerated Smurf2-mediated LMCD1 degradation via the ubiquitination system. The knockdown of LMCD1 inhibited TGF-ß1-induced EMT in both HK-2 cells and unilateral ureteral obstruction mice. Our results indicate a positive feedback loop between TGF-ß1 and LMCD1 for EMT induction in HK-2 cells and that Smurf2 acts as a negative regulator in this process by accelerating LMCD1 degradation.

Coexistence of cryoglobulinemia and ANCA-associated vasculitis in a chronic brucellosis patient -a case report and literature review.

BACKGROUND: The renal involvement of brucellosis is not common. Here we reported a rare case of chronic brucellosis accompanied by nephritic syndrome, acute kidney injury, the coexistence of cryoglobulinemia and antineutrophil cytoplasmic autoantibodies (ANCA) associated vasculitis (AAV) superimposed on iliac aortic stent implantation. The diagnosis and treatment of the case are instructive. CASE PRESENTATION: A 49-year-old man with hypertension and iliac aortic stent implantation was admitted for unexplained renal failure with signs of nephritic syndrome, congestive heart failure, moderate anemia and livedoid change in the left sole with pain. His past history included chronic brucellosis and he just underwent the recurrence and completed the 6 weeks of antibiotics treatment. He demonstrated positive cytoplasmic/proteinase 3 ANCA, mixed type cryoglobulinemia and decreased C3. The kidney biopsy revealed endocapillary proliferative glomerulonephritis with a small amount of crescent formation. Immunofluorescence staining revealed only C3-positive staining. In accordance with clinical and laboratory findings, post-infective acute glomerulonephritis superimposed with AAV was diagnosed. The patient was treated with corticosteroids and antibiotics and sustained alleviation of renal function and brucellosis was achieved during the course of a 3-month follow-up. CONCLUSIONS: Here we describe the diagnostic and treatment challenge in a patient with chronic brucellosis related glomerulonephritis accompanied by the coexistence of AAV and cryoglobulinemia. Renal biopsy confirmed the diagnosis of postinfectious acute glomerulonephritis overlapping with ANCA related crescentic glomerulonephritis, which was not ever reported in the literature. The patient showed a good response to steroid treatment which indicated the immunity-induced kidney injury. Meanwhile, it is essential to recognize and actively treat the coexisting brucellosis even when there are no clinical signs of the active stage of infection. This is the critical point for a salutary patient outcome for brucellosis associated renal complications.

Systematic investigation of the mechanical, electronic, and interfacial properties of high mobility monolayer InAs from first-principles calculations.

Due to the excellent electrostatic control, high mobility, large specific surface area, and suitable direct energy gap of two-dimensional (2D) indium arsenide (InAs), it is regarded as one of the most promising alternative channel materials for next-generation electronic and optoelectronic devices. Recently, 2D semiconducting InAs has been successfully prepared. Based on first-principles calculations, we calculate the mechanical, electronic, and interfacial properties of monolayer (ML) fully-hydrogen-passivated InAs (InAsH2) material. The results show that 2D InAsH2 with excellent stability has a suitable logic device band gap (1.59 eV) comparable to silicon (1.14 eV) and 2D MoS2 (1.80 eV), and the electron carrier mobility of ML InAsH2 (490 cm2 V-1 s-1) is twice as large as that of 2D MoS2 (200 cm2 V-1 s-1). In addition, we study the electronic structure of the interfacial contact characteristics of ML half-hydrogen-passivated InAs (InAsH) with seven bulk metals (Ag, Au, Cu, Al, Ni, Pd, Pt) and two 2D metals (ML Ti2C and ML graphene). 2D InAs was metallized after contact with the seven bulk metals and two 2D metals. Based on the above, we insert 2D boron nitride (BN) between ML InAsH and the seven low/high-power function bulk metals to eliminate the interfacial states. Remarkably, the semiconducting properties of 2D InAs with Pd and Pt electrodes are recovered, and 2D InAs achieves p-type ohmic contact with the Pt electrode, which facilitates high on-current and high-frequency operation of the transistor. Hence, this work provides systematic theoretical guidance for the design of next-generation electronic devices.

A Portable Nucleic Acid Sensor Based on PCR for Simple, Rapid, and Sensitive Testing of Botrytis cinerea in Ginseng.

Botrytis cinerea is a ubiquitous pathogen that can infect at least 200 dicotyledonous plant species including many agriculturally and economically important crops. In Ginseng, the fungus may cause ginseng gray mold disease, causing great economic losses in the ginseng industry. Therefore, the early detection of B. cinerea in the process of ginseng production is necessary for the disease prevention and control of the pathogen's spread. In this study, a polymerase chain reaction-nucleic acid sensor (PCR-NAS) rapid detection technique was established, and it can be used for field detection of B. cinerea through antipollution design and portable integration. The present study showed that the sensitivity of PCR-NAS technology is 10 times higher than that of traditional PCR-electrophoresis, and there is no need for expensive detection equipment or professional technicians. The detection results of nucleic acid sensors can be read by the naked eye in under 3 min. Meanwhile, the technique has high specificity for the detection of B. cinerea. The testing of 50 field samples showed that the detection results of PCR-NAS were consistent with those of the real-time quantitative PCR (qPCR) method. The PCR-NAS technique established in this study can be used as a novel nucleic acid field detection technique, and it has a potential application in the field detection of B. cinerea to achieve early warning of the pathogen infection.

Magnetic modulation of topological polarization singularities in momentum space.

The polarization singularities in momentum space, rather than in real space, are capturing interest for active singular optics with exotic light scattering and various topological phenomena, which have potential applications in vortex nano-lasers, valley exciton emission, and others. Here, we propose to magnetically control the polarization singularities in momentum space in the photonic crystal slabs with inversion spatial symmetry (P symmetry). A pair of C points (circular polarization points) with the same topological charge is spawned from a V point (polarization vortex center), and they can be dynamically shifted in momentum space with the variation of the magnetic field. Moreover, the coupling between transverse electric (TE) and transverse magnetic (TM) modes induced by the magnetic field gives rise to a hybrid mode, which can close certain leaky channels to achieve an accidental V point. Such active manipulation of polarization singularities with magnetic field is promised for various applications in light-matter interactions and reveals novel phenomena and physics in singular optics and topological photonics.

Influence of Fluorinated Components on Perovskite Solar Cells Performance and Stability.

Several valuable scientific investigations have been conducted these last few years in materials design and device engineering for perovskite solar cells (PSCs) to make them competitive compared to traditional silicon-based photovoltaic technologies. Consequently, high power conversion efficiency beyond 25% is nowadays reported. However, their long-term stability remains a significant challenge to overcome. Herein, the influence of fluorinated compounds on each layer of PSCs devices and their impact on the resulted device performances and stability is spotlighted. The fluorinated compounds exhibit attractive properties due to their very high electronegativity attributed to the fluorine atom, and their strong hydrophobicity. Thus, the introduction of these compounds is found to be a successful strategy to positively suppress the surface trap states, enhancing charge collection and reducing interfacial charge recombination. Besides, a better film quality and better energy level alignment is obtained, resulting in the improvement of device photovoltaic parameters such as the open-circuit voltage (Voc ), short-circuit current (Jsc ), and fill factor (FF), and then, the device's overall power conversion efficiency (PCE). Their long-term stability is also found to further be improved.

Controllable Liquid Exfoliation of Fibrous Phosphorus and Its Live-Cell Imaging.

One-dimensional materials have been intensively studied because of their diverse properties, which are revealed when exfoliated from their bulk precursor. Liquid exfoliation is not only possibly the most suitable method for large-scale applications but also affords an opportunity to develop new deposition techniques. Fibrous phosphorus is a relatively new, one-dimensional material with high carrier mobility and a fast response velocity for future application in nanodevices. Because controllable liquid exfoliation processing of fibrous phosphorus (FP) remains challenging, we considered two factors: the exfoliated result and the removable solvents. We proposed a method for determining suitable solvents for efficient exfoliation and controllable size of fibrous phosphorus using Hansen solubility parameters. By controlling the water/acetone mixture ratios, the exfoliation effect could be controlled. Our work showed that 40% of the FP nanofibers were less than 10 nm in thickness and 70% of them were less than 20 nm. Furthermore, fibrous phosphorus produced a red fluorescence in bioimaging.

Immunoglobulin a nephropathy as the first clinical presentation of Wilson disease: a case report and literature review.

BACKGROUND: Wilson disease (WD) is a rare genetic disorder of copper metabolism. Differences in copper tissue accumulation lead to various clinical manifestations, including some atypical presentations. The complex clinical features of WD make diagnosis challenging, delaying the best chance for treatment. CASE PRESENTATION: We report a case of a 26-year-old man with nephritis-range proteinuria and elevated serum creatinine. The renal pathology indicated immunoglobulin A (IgA) nephropathy and tubular injury, which was inconsistent with glomerular lesions. Cirrhosis was also detected by imaging examination. Considering both kidney injury and liver damage, WD was suspected. Based on results showing abnormal copper metabolism, corneal Kayser-Fleischer rings, and genetic disorders in the ATP7B gene, the patient was finally diagnosed with WD. After treatment with oral penicillamine, zinc sulfate and losartan, the patient showed alleviation of both WD and nephropathy after 3 years of follow-up. He maintained a good quality of daily life. CONCLUSION: This case highlights that unexplained neurological and liver symptoms in patients with IgA nephropathy can be clues for WD.

Integrated Molar Chiral Sensing Based on High-Q Metasurface.

Circular dichroism (CD) spectroscopy is conventionally utilized for the enantiomer-specific analysis of chiral samples, which is of great significance in academia and industry. Recently, metasurfaces have been introduced for enhancing the sensitivity of CD spectroscopy. However, the obtained CD spectrum alone cannot provide the enantiomer composition of a chiral sample. It should be normalized by the molar concentration of chiral molecules, which is usually measured on a different platform. Here, for the first time we demonstrate the integrated acquisition of CD spectrum and molar concentration over an individual metasurface with high sensitivities. High-Q resonances are supported on the metasurface, governed by bound states in the continuum. The generated superchiral field enables a 59-times enhancement of CD signal. Meanwhile, the refractive index-based detection of molar concentration achieves a large figure-of-merit of 80.6. Accordingly, a standard procedure is established for the integrated molar chiral sensing with high sensitivity.

Liquid Exfibration and Optoelectronic Devices of Fibrous Phosphorus.

Quasi-one-dimensional (Q1D) semiconductor materials, such as carbon nanotubes, SbSI, MP15 (M = Li, Na, K), and selenium and tellurium nanowires, show amazing potential for applications in future nanoelectronic and optoelectronic devices. However, intricate chirality in the structure of carbon nanotubes limits their applications. Also, the performance of MP15 in optoelectronics has yet to be extensively explored. One new Q1D semiconductor material, fibrous phosphorus (FP), has recently received attention because its raw material is less toxic. However, the ability to characterize FP by phase identification is limited in the assessment of micro/nano-thickness, such as exfibrated FP. So, identifying a precise Raman spectrum will allow for much better characterization. Here, a sufficiently sharp Raman spectrum of FP was obtained and analyzed. Moreover, we demonstrated that high-quality, few-layer FP fibers with thicknesses as low as 5.55 nm can be produced by liquid-phase exfibration under ambient conditions in solvents. More importantly, an optoelectronic detector based on a single FP fiber field-effect-transistor configuration was investigated. A rise time as short as about 40 ms was obtained for the FP transistors, illustrating the potential of FP single bundle crystals as a new one-dimensional material for optoelectronic device applications.

High-Performance Photodiode Based on Atomically Thin WSe2 /MoS2 Nanoscroll Integration.

Self-assembled structures of 2D materials with novel physical and chemical properties, such as the good electrical and optoelectrical performance in nanoscrolls, have attracted a lot of attention. However, high photoresponse speed as well as high responsivity cannot be achieved simultaneously in the nanoscrolls. Here, a photodiode consisting of single MoS2 nanoscrolls and a p-type WSe2 is demonstrated and shows excellent photovoltaic characteristics with a large open-circuit voltage of 0.18 V and high current intensity. Benefiting from the heterostructure, the dark current is suppressed resulting in an increased ratio of photocurrent to dark current (two orders of magnitude higher than the single MoS2 nanoscroll device). Furthermore, it yields high responsivity of 0.3 A W-1 (corresponding high external quantum efficiency of ≈75%) and fast response time of 5 ms, simultaneously. The response speed is increased by three orders of magnitude over the single MoS2 nanoscroll device. In addition, broadband photoresponse up to near-infrared could be achieved. This atomically thin WSe2 /MoS2 nanoscroll integration not only overcomes the disadvantage of MoS2 nanoscrolls, but also demonstrates a single nanoscroll-based heterostructure with high performance, promising its potential in the future optoelectronic applications.

Building Integrated Photovoltaic Module-Based on Aluminum Substrate With Forced Water Cooling.

The increase of operating temperature on a photovoltaic (PV) cell degrades its electrical efficiency. This paper is organized to describe our latest design of an aluminum substrate-based photovoltaic/thermal (PV/T) system. The electrical efficiency of the proposed PV/T can be increased by ∼ 20% in comparison with a conventional glass substrate-based PV. The work will benefit hybrid utilization of solar energy in development of building integrated photovoltaic systems.

Mesoporous TiO2 Nanowire Film for Dye-Sensitized Solar Cell.

In this work, TiO2 nanowire arrays were grown on fluorine-doped tin oxide (FTO) glass substrate, and then were converted into mesoporous nanowires (MNWs). The TiO2 MNWs are about 5 µm in length and 30-200 nm in diameter, with mesopores size of 5-30 nm randomly distributed on the NW surface. X-ray diffraction pattern reports show that the NWs are single crystallized rutile TiO2 and oriented grown along [001]. Through further characterization of FT-IR and TG-DSC, we proposed a reasonable explanation for pore existence. After dye-sensitized solar cells (DSSCs) assembly, the photoelectric conversion efficiency (PCE) of MNWs based DSSC achieved 3.2%. It means tenfold enhancement of photoelectric property compare with the as-grown NWs. Furthermore, dye absorb capacity of MNWs can reach up to 4.11 x 10(-8) mol/cm2. However, such MNWs can not only provide quick and efficient electron transmission channel, but also owns big specific surface area to absorb abundant dyes, thus conducive to fabricate solar cell with a high PCE.

A Spiking Artificial Vision Architecture Based on Fully Emulating the Human Vision.

Intelligent vision necessitates the deployment of detectors that are always-on and low-power, mirroring the continuous and uninterrupted responsiveness characteristic of human vision. Nonetheless, contemporary artificial vision systems attain this goal by the continuous processing of massive image frames and executing intricate algorithms, thereby expending substantial computational power and energy. In contrast, biological data processing, based on event-triggered spiking, has higher efficiency and lower energy consumption. Here, this work proposes an artificial vision architecture consisting of spiking photodetectors and artificial synapses, closely mirroring the intricacies of the human visual system. Distinct from previously reported techniques, the photodetector is self-powered and event-triggered, outputting light-modulated spiking signals directly, thereby fulfilling the imperative for always-on with low-power consumption. With the spiking signals processing through the integrated synapse units, recognition of graphics, gestures, and human action has been implemented, illustrating the potent image processing capabilities inherent within this architecture. The results prove the 90% accuracy rate in human action recognition within a mere five epochs utilizing a rudimentary artificial neural network. This novel architecture, grounded in spiking photodetectors, offers a viable alternative to the extant models of always-on low-power artificial vision system.

LMCD1 is involved in tubulointerstitial inflammation in the early phase of renal fibrosis by promoting NFATc1-mediated NLRP3 activation.

Prolonged renal inflammation contributes to fibrosis, which may eventually lead to irreversible chronic kidney disease. Our previous work demonstrated that LIM and cysteine-rich domain 1 (LMCD1) are associated with renal interstitial fibrosis in a 21-day unilateral ureteral obstruction (21UUO) mouse model. Interestingly, based on the gene expression omnibus database, we found that LMCD1 is enhanced in the mouse kidney as early as 5, 7, and 10 days following unilateral ureteral obstruction (UUO), suggesting that LMCD1 may exert its function in an earlier phase. To validate this conjecture, a 7UUO mouse model and a tumor necrosis factor-α (TNF-α)-stimulated HK-2 cell model were established, followed by injection of adenovirus vectors carrying short hairpin RNA targeting LMCD1. LMCD1 silencing ameliorated renal collagen deposition and reduced the expression of profibrotic factors in the 7UUO model. LMCD1 silencing alleviated tubulointerstitial inflammation by mitigating F4/80+ cell infiltration, monocyte chemoattractant protein-1 release and nuclear factor-κB activation. In addition, LMCD1 silencing suppressed NOD-like receptor family, pyrin domain containing 3 (NLRP3) inflammasome activation and nuclear factor of activated T cells 1 (NFATc1) nuclear translocation. Consistent results were obtained in TNF-α-stimulated HK-2 cells in vitro. Mechanistically, the transcriptional coactivator LMCD1 cooperates with the transcription factor NFATc1 to increase NLRP3 expression. Collectively, these findings suggest that LMCD1 participates in tubulointerstitial inflammation via an LMCD1-NFATc1/NLRP3 mechanism. LMCD1 may therefore become a potential target for the control of renal inflammation and fibrosis.

[Expression level and clinical significance of CD44 and CD33 in 77 patients with benign lymphoadenosis of oral mucosa].

PURPOSE: To investigate the expression and clinical significance of CD44 and CD33 in benign lymphoadenosis of oral mucosa(BLOM). METHODS: From January 2017 to March 2020, seventy-seven BLOM wax blocks from the Department of Pathology of Qingdao Traditional Chinese Medicine Hospital were selected as the experimental group, and 63 cases of normal oral mucosal tissue wax blocks during the same period were selected as the control group. Immunohistochemical method was used to detect the positive expression of CD44 and CD33 in the two groups.Spearman correlation analysis was used to analyze the correlation between the positive expression of CD33 and the positive expression of CD44 in the diseased tissues of BLOM patients.The general information about patients were collected.The relationship between the expression of CD33 and CD44 in the diseased tissues of BLOM patients and the clinicopathological characteristics of BLOM patients were analyzed. SPSS 21.0 software package was used for statistical analysis of the data. RESULTS: The positive expression rates of CD33 in the control group and the experimental group were 95.24% and 63.64%, respectively, and the difference was statistically significant(P＜0.05). The positive expression rates of CD44 in the control group and the experimental group were 93.65% and 67.53%, respectively, and the difference was statistically significant(P＜0.05). The results of Spearman correlation analysis showed that the positive expression of CD33 in the diseased tissues of BLOM patients was positively correlated with the positive expression of CD44 (r=0.834, P=0.002). The expression of CD33 and CD44 in the diseased tissues of patients with BLOM were related to clinical type, degree of inflammation, presence or absence of lymphoid follicles, and lymphocyte infiltration(P＜0.05), but not related to age, gender, course of disease, location, and epithelial surface keratinization(P＞0.05). CONCLUSIONS: The positive expression rate of CD33 and CD44 in the BLOM tissues decreased, which was closely related to the clinical type, degree of inflammation, presence or absence of lymphoid follicles, and lymphocyte infiltration.

The resolutions of drive-level capacitance profiling technique.

Recently, the drive level capacitance profiling (DLCP) technique has been proven to be effective in resolving the spatial and energetic distributions of defects through feasible measurements. However, the discussion on its ranges and resolutions is still missing, which is urgent in evaluating the validity of the calculated defect profiles. In this work, we propose a method to analyze the ranges and resolutions of DLCP. Assuming that the test instrument has more influence on the experimental results than the experimental environment, this method can be used to evaluate the resolution of DLCP for different test instruments. Through revisiting the equations involved in DLCP, we learned that the sources of the limits and resolutions are (1) the instrument system error and inherent resolution and (2) the device impedance. Consequently, from the study of device impedance and the measuring instrument system error, the resolutions of DLCP could be calculated according to the error propagation theory. We provide the spatial distribution of the minimum selection range of AC signal δV used by DLCP and the spatial resolution of DLCP technology. This method can be used to evaluate the resolution of DLCP for different test instruments.

Composition engineering of perovskite absorber assisted efficient textured monolithic perovskite/silicon heterojunction tandem solar cells.

A two-terminal (2T) perovskite/silicon heterojunction tandem solar cell (PVSK/SHJ) is considered one of the most promising candidates for next-generation photovoltaics with the possibility of achieving a power conversion efficiency (PCE) exceeding 30% at low production cost. However, the current mismatch and voltage loss have seriously decreased the performance of 2T PVSK/SHJ tandem solar cells. Here, we report the composition engineering for perovskite top cells to prepare a high performance 2T tandem cell by tuning CsBr co-evaporating rates and increasing concentrations of FAI/FABr solutions. We show that the variation in composition for the perovskite absorber effectively optimized the band gap and diminished the defects of the top cell. Our investigations reveal that the current mismatch of sub-cells was carefully tuned by introducing CsBr at varied co-evaporating rates and the voltage loss was decreased by increasing concentrations of FAI/FABr solutions. Thus, we achieved a PCE of 23.22% in two-terminal monolithic tandems with an area of 1.2 cm2 by tuning the composition of the perovskite absorber.

An all-two-dimensional Fe-FET retinomorphic sensor based on the novel gate dielectric In2Se3-xOx.

Two-dimensional (2D) ferroelectric field-effect transistors (Fe-FETs) have attracted extensive interest as a competitive platform for implementing future-generation functional electronics, including digital memory and brain-inspired computing circuits. In 2D Fe-FETs, the 2D ferroelectric materials are more suitable as gate dielectric materials compared to 3D ferroelectric materials. However, the current 2D ferroelectric materials (represented by α-In2Se3) need to be integrated with other 3D gate dielectric layers because of their high conductivity as a ferroelectric semiconductor. This 2D/3D hybrid structure can lead to compatibility problems in practical devices. In this study, a new 2D gate dielectric material that is compatible with the complementary metal-oxide semiconductor process was found by using oxygen plasma treatment. The 2D gate dielectric material obtained shows excellent performance, with an equivalent oxide thickness of less than 0.15 nm, and excellent insulation, with a leakage current of less than 2 × 10-5 A cm-2 (under a 1 V gate voltage). Based on this dielectric layer and the α-In2Se3 ferroelectric gate material, we fabricated an all-2D Fe-FET high-performance photodetector with a high on/off ratio (∼105) and detectivity (>1013 Jones). Moreover, the photoelectric device integrates perception, memory and computing characteristics, indicating that it can be applied to an artificial neural network for visual recognition.