High sensitivity pH sensing by using a ring resonator laser integrated into a microfluidic chip.

We present a chip-scale integrated pH sensor with high sensitivity by using an optofluidic ring resonator (OFRR) laser. An optical fiber with a high refractive index (RI) is employed both as an optical cavity and the sensing reactor along a microchannel, while disodium fluorescein (DSF) aqueous solution with a low RI is served as the cladding gain medium and fluorescent probes. The pump light is introduced along the fiber axis and guided by the total internal reflection at the fiber/cladding interface. The evanescent field of the pump light extends out of the fiber surface and efficiently excites the dye molecules residing in the evanescent field region of the Whispering Gallery Modes (WGMs) of the OFRRs to produce lasing emission. This pumping scheme provides a uniform excitation to the gain medium and significantly increases the signal-to-noise ratio, ensuring a low lasing threshold and highly sensitive sensing. The lasing threshold property under different pH conditions is experimentally and theoretically conducted to evaluate the sensing performance, which shows that the lasing threshold highly depends on the pH value of the cladding solution due to the increasing deprotonation process. We further verify that the intensity of the lasing emission and the pH value shows good linearity in the pH range 6.51-8.13, with a 2-order-of-magnitude sensitivity enhancement compared to fluorescence measurement. The proposed OFRR lasing platform shows excellent robustness and low sample consumption, providing a powerful sensing strategy in medicine, and hazardous/toxic/volatile sensing, which require label-free, real-time, and in situ detection.

Polarization characteristics of Whispering-Gallery-Mode fiber lasers based on evanescent-wave-coupled gain.

The polarization characteristics of Whispering-Gallery-Mode (WGM) fiber lasers based on evanescent-wave-coupled gain are investigated. For the laser gain is excited by side-pumping scheme, it is found that the polarization property of lasing emission is simply dependent on the polarized states of the pump beams. The polarization property of lasing emission depends on the propagating situation of the pump beams in an optical fiber if the laser gain is excited by evanescent-wave pumping scheme, that is, if the pump beams within the fiber are meridional beams, the lasing emission is a transverse electric (TE) wave that forms a special radial polarization emission. However, if the pump beams within the fiber are skew beams, both transverse magnetic (TM) and TE waves exist simultaneously in lasing emission that forms a special axially and radially mixed polarization emission. Pumped by skew beams, the wave-number differences between TE and TM waves are also investigated quantitatively, the results demonstrate that the wave-number difference decreases with the increase of the fiber diameter and the refractive index (RI) of the cladding solution. The observed polarization characteristics have been well explained based on lasing radiation mechanism of WGM fiber laser of gain coupled by evanescent wave.