Wettability Engineering of Solar Methanol Synthesis.

Engineering the wettability of surfaces with hydrophobic organics has myriad applications in heterogeneous catalysis and the large-scale chemical industry; however, the mechanisms behind may surpass the proverbial hydrophobic kinetic benefits. Herein, the well-studied In2O3 methanol synthesis photocatalyst has been used as an archetype platform for a hydrophobic treatment to enhance its performance. With this strategy, the modified samples facilitated the tuning of a wide range of methanol production rates and selectivity, which were optimized at 1436 µmol gcat-1 h-1 and 61%, respectively. Based on in situ DRIFTS and temperature-programmed desorption-mass spectrometry, the surface-decorated alkylsilane coating on In2O3 not only kinetically enhanced the methanol synthesis by repelling the produced polar molecules but also donated surface active H to facilitate the subsequent hydrogenation reaction. Such a wettability design strategy seems to have universal applicability, judged by its success with other CO2 hydrogenation catalysts, including Fe2O3, CeO2, ZrO2, and Co3O4. Based on the discovered kinetic and mechanistic benefits, the enhanced hydrogenation ability enabled by hydrophobic alkyl groups unleashes the potential of the surface organic chemistry modification strategy for other important catalytic hydrogenation reactions.

Effectiveness of BMP plans in different land covers, with random, targeted, and optimized allocation.

The ability of 5 Best Management Practice (BMP) allocation methods that consider 8 pre-selected BMPs, to control 4 Nonpoint Source (NPS) constituents in 4 watersheds with contrasting land covers, is investigated. The methods range from random selection of BMPs on randomly selected sites, to optimized selection of BMPs at optimized locations, and the land covers range from natural to ultra-urban. The optimization methods rely on Genetic Algorithms (GA), and a method that uses expert systems is also applied. Watershed hydrologic and water quality response models are developed, using the Soil Water Assessment Tool (SWAT), to compute baseline outputs from the 4 study watersheds without BMPs, and to obtain predicted reductions in NPS constituent outputs when BMPs are implemented in accordance with the 5 allocation plans. Methods used to represent BMPs in SWAT and to speed up optimization processes are also presented. Results indicate that the most computationally intensive methods produce the best results across landscape types. Results also show that opportunities exist for less intensive methods, particularly in less-built environments. For these, however, siting BMPs to hotspots remains an important requirement. The need to select the most appropriate BMP for each implementation site is observed to increase with the level of urbanization of the landscape. Results indicate that optimized selection of BMPs, sited at optimized locations, results in the highest-performing BMP allocation plans across landscape types. Also, the focus on hotspots has the advantage of resulting in BMP plans requiring involvement of fewer stakeholders than when BMPs are located in non-hotspot zones. This targeted hotspot approach could help reduce cost and increase efficiency of implementation.

New black indium oxide-tandem photothermal CO2-H2 methanol selective catalyst.

It has long been known that the thermal catalyst Cu/ZnO/Al2O3(CZA) can enable remarkable catalytic performance towards CO2 hydrogenation for the reverse water-gas shift (RWGS) and methanol synthesis reactions. However, owing to the direct competition between these reactions, high pressure and high hydrogen concentration (≥75%) are required to shift the thermodynamic equilibrium towards methanol synthesis. Herein, a new black indium oxide with photothermal catalytic activity is successfully prepared, and it facilitates a tandem synthesis of methanol at a low hydrogen concentration (50%) and ambient pressure by directly using by-product CO as feedstock. The methanol selectivities achieve 33.24% and 49.23% at low and high hydrogen concentrations, respectively.

Atomic layer deposition of silica to improve the high-temperature hydrothermal stability of Cu-SSZ-13 for NH3 SCR of NOx.

The improvement of stability is a crucial and challenging issue for industrial catalyst, which affects not only the service time but also the cost of catalyst. This is especially prominent for that applied in harsh environment atmospheres, such as the exhaust of diesel vehicles. Herein, we reported a new strategy to improve the high-temperature hydrothermal stability of Cu-SSZ-13, which is a promising catalyst for the treatment of exhaust emitted from diesel vehicles through the NH3-SCR NOx route. Different from that reported in literature, we managed to improve the high-temperature hydrothermal stability of Cu-SSZ-13 by coating the surface with a nanolayer of stable SiO2 material using the atomic layer deposition (ALD) method. The coating of SiO2 layers effectively suppressed the leaching of alumina from the SSZ-13 molecular sieve even after the hydrothermal aging at 800 °C for 16 h with 12.5% water in air. Meanwhile, the ultra-thin SiO2 nanolayer does not block the pores of zeolites and affect the catalytic activity of Cu-SSZ-13 contribute to the superiority of the ALD technology.

A Wearable Augmented Reality Navigation System for Surgical Telementoring Based on Microsoft HoloLens.

This paper reports a new type of augmented reality (AR) system that integrates a Microsoft HoloLens device with a three-dimensional (3D) point tracking module for medical training and telementored surgery. In this system, a stereo camera is used to track the 3D position of a scalpel and transfer its coordinates wirelessly to a HoloLens device. In the scenario of surgical training, a virtual surgical scene with pre-recorded surgical annotations is superimposed with the actual surgical scene so that the surgical trainee is able to operate following virtual instructions. In the scenario of telementored surgery, the virtual surgical scene is co-registered with the actual surgical scene so that the virtual scalpel remotely mentored by an experienced surgeon provides the AR guidance for the inexperienced on-site operator. The performance characteristics of the proposed AR telementoring system are verified by benchtop experiments. The clinical applicability of the proposed system in telementored skin grafting surgery and fasciotomy is validated in a New Zealand rabbit model. Our benchtop and in vivo experiments demonstrate the potential to improve surgical performance and reduce healthcare disparities in remote areas with limited resources.

Benchtop and Animal Validation of a Projective Imaging System for Potential Use in Intraoperative Surgical Guidance.

We propose a projective navigation system for fluorescence imaging and image display in a natural mode of visual perception. The system consists of an excitation light source, a monochromatic charge coupled device (CCD) camera, a host computer, a projector, a proximity sensor and a Complementary metal-oxide-semiconductor (CMOS) camera. With perspective transformation and calibration, our surgical navigation system is able to achieve an overall imaging speed higher than 60 frames per second, with a latency of 330 ms, a spatial sensitivity better than 0.5 mm in both vertical and horizontal directions, and a projection bias less than 1 mm. The technical feasibility of image-guided surgery is demonstrated in both agar-agar gel phantoms and an ex vivo chicken breast model embedding Indocyanine Green (ICG). The biological utility of the system is demonstrated in vivo in a classic model of ICG hepatic metabolism. Our benchtop, ex vivo and in vivo experiments demonstrate the clinical potential for intraoperative delineation of disease margin and image-guided resection surgery.

A Wearable Goggle Navigation System for Dual-Mode Optical and Ultrasound Localization of Suspicious Lesions: Validation Studies Using Tissue-Simulating Phantoms and an Ex Vivo Human Breast Tissue Model.

Surgical resection remains the primary curative treatment for many early-stage cancers, including breast cancer. The development of intraoperative guidance systems for identifying all sites of disease and improving the likelihood of complete surgical resection is an area of active ongoing research, as this can lead to a decrease in the need of subsequent additional surgical procedures. We develop a wearable goggle navigation system for dual-mode optical and ultrasound imaging of suspicious lesions. The system consists of a light source module, a monochromatic CCD camera, an ultrasound system, a Google Glass, and a host computer. It is tested in tissue-simulating phantoms and an ex vivo human breast tissue model. Our experiments demonstrate that the surgical navigation system provides useful guidance for localization and core needle biopsy of simulated tumor within the tissue-simulating phantom, as well as a core needle biopsy and subsequent excision of Indocyanine Green (ICG)-fluorescing sentinel lymph nodes. Our experiments support the contention that this wearable goggle navigation system can be potentially very useful and fully integrated by the surgeon for optimizing many aspects of oncologic surgery. Further engineering optimization and additional in vivo clinical validation work is necessary before such a surgical navigation system can be fully realized in the everyday clinical setting.