TNF-α-licensed exosome-integrated titaniumaccelerated T2D osseointegration by promoting autophagy-regulated M2 macrophage polarization.

Type 2 diabetes (T2D) is on a notable rise worldwide, which leads to unfavorable outcomes during implant treatments. Surface modification of implants and exosome treatment have been utilized to enhance osseointegration. However, there has been insufficient approach to improve adverse osseointegration in T2D conditions. In this study, we successfully loaded TNF-α-treated mesenchymal stem cell (MSC)-derived exosomes onto micro/nano-network titanium (Ti) surfaces. TNF-α-licensed exosome-integrated titanium (TNF-exo-Ti) effectively enhanced M2 macrophage polarization in hyperglycemic conditions, with increased secretion of anti-inflammatory cytokines and decreased secretion of pro-inflammatory cytokines. In addition, TNF-exo-Ti pretreated macrophage further enhanced angiogenesis and osteogenesis of endothelial cells and bone marrow MSCs. More importantly, TNF-exo-Ti markedly promoted osseointegration in T2D mice. Mechanistically, TNF-exo-Ti activated macrophage autophagy to promote M2 polarization through inhibition of the PI3K/AKT/mTOR pathway, which could be abolished by PI3K agonist. Thus, this study established TNF-α-licensed exosome-immobilized titanium surfaces that could rectify macrophage immune states and accelerate osseointegration in T2D conditions.

ATG7-mediated autophagy protects human gingival myofibroblasts from irradiation-induced apoptosis.

BACKGROUND: Apoptosis resistance of myofibroblasts is critical in pathology of irradiation-induced fibrosis and osteoradionecrosis of the jaw (ORNJ). However, molecular mechanism of apoptosis resistance induced by irradiation in oral myofibroblasts remains largely obscure. METHODS: Matched ORNJ fibroblasts and normal fibroblasts pairs from gingival were primarily cultured, and myofibroblast markers of α-SMA and FAP were evaluated by qRT-PCR and western blot. CCK8 assay and flow cytometric analysis were performed to investigate the cell viability and apoptosis under irradiation treatment. Autophagy-related protein LC3 and ATG7, and punctate distribution of LC3 localization were further detected. After inhibition of autophagy with inhibitor CQ and 3-MA, as well as transfected ATG7-siRNA, cell viability and apoptosis of ORNJ and normal fibroblasts were further assessed. RESULTS: Compared with normal fibroblasts, ORNJ fibroblasts exhibited significantly higher α-SMA and FAP expression, increased cell, viability and decreased apoptosis under irradiation treatment. LC3-II and ATG7 were up-regulated in ORNJ fibroblasts with irradiation stimulation. After inhibition of irradiation-induced autophagic flux with lysosome inhibitor CQ, LC3-II protein was accumulated and punctate distribution of LC3 localization was increased in ORNJ fibroblasts. Moreover, autophagy inhibitor CQ and 3-MA enhanced the irradiation-induced apoptosis but inhibited viability of ORNJ fibroblasts. Silencing ATG7 with siRNA could obviously weaken irradiation-induced LC3-II expression, and promoted irradiation-induced apoptosis of ORNJ fibroblasts. After knockdown of ATG7, finally, p-AKT(Ser473) and p-mTOR(Ser2448) levels of ORNJ fibroblasts were significantly increased under irradiation. CONCLUSION: Compared with normal fibroblasts, human gingival myofibroblasts are resistant to irradiation-induced apoptosis via autophagy activation. Silencing ATG7 may evidently inhibit activation of autophagy, and promote apoptosis of gingival myofibroblasts via Akt/mTOR pathway.

The temporal shift of peri-implant microbiota during the biofilm formation and maturation in a canine model.

OBJECTIVES: Although the mature peri-implant biofilm composition is well studied, there is very little information on the succession of in vivo dental implant colonization. The aim of this study was to characterize the temporal changes and diversity of peri-implant supra-mucosal and sub-mucosal microbiota during the process of the plaque maturation. MATERIALS AND METHODS: Dental implants (n = 25) were placed in the mandible of 3 beagle dogs. Illumina MiSeq sequencing of the hypervariable V3-V4 region of the 16S rRNA gene amplicons was used to characterize the supra/sub-mucosal microbiota in the peri-implant niches at 1day (T1), 7days (T2), 14days (T3), 21days (T4) and 28days (T5) after Phase Ⅱ surgery of the healing abutment placement. QIIME, Mothur, LEfSe and R-package were used for downstream analysis. RESULTS: A total of 1184 operational taxonomic units (OTUs), assigned into 22 phyla, 264 genera and 339 species were identified. In supra-mucosal niches, the alpha parameters of shannon, sobs and chao1 displayed significant differences between T1 and other time-points. However, in sub-mucosal niches, only sobs, chao1, and ace indexes displayed significant differences between T1 and T3, and T1 and T5. Beta-diversity showed statistically significant difference between T1 and T2, T3, T4, T5 within both sub-mucosal and supra-mucosal plaque. The phyla Bacteroidetes, Proteobacteria and Firmicutes were the most dominant phyla of both sub-mucosal and supra-mucosal niches at all time-points and Firmicutes increased during the maturation of peri-implant plaque. At the genus level, Neisseria decreased significantly after T1 suggesting the establishment of an anaerobic microenvironment. A decrease of Porphyromonas during the formation of sub-mucosal microbial community was also detected. Co-occurrence network analysis exhibited a more complicated co-occurrence relationship of bacterial species in the sub-mucosal niches. Fusobacterium nucleatum, Filifactor villosus, and some other species may play a crucial role in biofilm maturation. CONCLUSIONS: The present results suggested that the development of peri-implant biofilm followed a similar pattern to dental plaque formation. Sub-mucosal biofilm may go through a more complicated procedure of maturation than supra-mucosal biofilm.

Micro/nano-textured hierarchical titanium topography promotes exosome biogenesis and secretion to improve osseointegration.

BACKGROUND: Micro/nano-textured hierarchical titanium topography is more bioactive and biomimetic than smooth, micro-textured or nano-textured titanium topographies. Bone marrow mesenchymal stem cells (BMSCs) and exosomes derived from BMSCs play important roles in the osseointegration of titanium implants, but the effects and mechanisms of titanium topography on BMSCs-derived exosome secretion are still unclear. This study determined whether the secretion behavior of exosomes derived from BMSCs is differently affected by different titanium topographies both in vitro and in vivo. RESULTS: We found that both micro/nanonet-textured hierarchical titanium topography and micro/nanotube-textured hierarchical titanium topography showed favorable roughness and hydrophilicity. These two micro/nano-textured hierarchical titanium topographies enhanced the spreading areas of BMSCs on the titanium surface with stronger promotion of BMSCs proliferation in vitro. Compared to micro-textured titanium topography, micro/nano-textured hierarchical titanium topography significantly enhanced osseointegration in vivo and promoted BMSCs to synthesize and transport exosomes and then release these exosomes into the extracellular environment both in vitro and in vivo. Moreover, micro/nanonet-textured hierarchical titanium topography promoted exosome secretion by upregulating RAB27B and SMPD3 gene expression and micro/nanotube-textured hierarchical titanium topography promoted exosome secretion due to the strongest enhancement in cell proliferation. CONCLUSIONS: These findings provide evidence that micro/nano-textured hierarchical titanium topography promotes exosome biogenesis and extracellular secretion for enhanced osseointegration. Our findings also highlight that the optimized titanium topography can increase exosome secretion from BMSCs, which may promote osseointegration of titanium implants.

Effect of socket-shield technique on alveolar ridge soft and hard tissue in dogs.

AIM: To study the soft and hard tissue alterations of the alveolar ridge after socket-shield technique. MATERIALS AND METHODS: In four Beagle dogs, the following treatments (Tx) were randomly assigned to 32 extraction sockets: Tx1: blood clot; Tx2: Bio-Oss Collagen; Tx3: socket-shield technique and blood clot; Tx4: socket-shield technique and Bio-Oss Collagen. The width and height alterations of the buccal bone plate were calculated by CBCT scans. The dimensional alterations of the buccal aspect of the alveolar ridge at different time points were calculated by impressions using digital imaging analysis. The dogs were sacrificed for micro-CT and histologic analysis 3 months after surgery. RESULTS: Width, height and dimensional alterations of Tx3 and Tx4 were significantly lower than those of Tx1 and Tx2. Bone morphological parameters displayed no significant differences among four groups except for the trabecular thickness of Tx1 and Tx2. The quantity and quality of hard tissue containing the residual teeth of Tx3 and Tx4 were much greater than those of Tx1 and Tx2. CONCLUSIONS: Socket-shield technique may be beneficial in preserving the soft and hard tissue of the alveolar ridge, which is better than simple bone grafting in the extraction socket.

Unconventional Dental Implant Placement Through an Impacted Maxillary Central Incisor in Stable Contact With Enamel and Dentin: A Case Report.

When edentulism is accompanied by an impacted tooth, conventional treatment usually involves traumatic tooth extraction, which would inevitably destroy the surrounding alveolar bone and cause unfavorable esthetics, especially for anterior teeth. Recently, implant placement through the impacted tooth or residual root has been proposed as an alternative to invasive extraction. A particular type of integration has been observed between dentin/cementum and titanium implant, while enamel-implant contact has not been reported. In this article, an implant was placed through the impacted maxillary central incisor, thereby avoiding an invasive extraction surgery. The buccal section of the tooth, including crown enamel, was retained in situ for buccal alveolar ridge preservation. The follow-up results were satisfactory, and a stable enamel-implant contact was observed. Combining with previous similar studies, this technique opens intriguing possibilities and brings fresh insight for the concept of dentointegration. More histological and clinical studies with long-term follow-up are warranted before endorsing this technique in routine application.

Effect of artificial landmarks of the prefabricated auxiliary devices located at different arch positions on the accuracy of complete-arch edentulous digital implant scanning: An in-vitro study.

OBJECTIVES: To examine the effect of artificial landmarks of prefabricated auxiliary devices (PAD) located at different arch positions on the accuracy of complete-arch edentulous digital implant scanning. METHODS: A reference model containing four analogs and PAD were fabricated by a 3D printer (AccuFab-C1s, 3DShining). 10 digital scans were performed using an intraoral scanner (Aoralscan 3, 3DShining), sv 1.0.0.3115, with artificial landmarks located at different arch positions: group I, without any artificial landmarks; group II, with artificial landmarks at the anterior region; group III, with artificial landmarks at the posterior region. group IV: with artificial landmarks at both anterior and posterior regions. For group V: Conventional open-tray splinted impressions. The reference file and conventional stone casts were digitalized by using a dental laboratory scanner. The related files were imported into inspection software for trueness and precision assessment. Statistical analysis was performed with One-way ANOVA and Kruskal-Wallis test. The level of significance was set at α=0.05. RESULTS: For the global accuracy assessment, significantly higher global trueness was seen in group II (p < 0.01), III (p < 0.001), IV (p < 0.001) and V (p < 0.001) than group I. Significantly higher global precision was seen in group III (p < 0.001), IV (p < 0.001) and V (p < 0.001) than group I. For the local accuracy assessment, the PAD primarily improved accuracy on the linear deviations. CONCLUSIONS: Artificial landmarks of PAD at different arch positions significantly influenced the scanning accuracy. Applying the PAD in group IV could achieve comparable outcomes to conventional open-tray splinted impressions. Artificial landmarks on the posterior region may be more pivotal than those on the anterior region. CLINICAL SIGNIFICANCE: Group IV could achieve comparable accuracy to conventional open-tray splinted impressions.

Effect of prefabricated auxiliary devices and scanning patterns on the accuracy of complete-arch implant digital impressions.

OBJECTIVES: This study aimed to evaluate the impact of prefabricated auxiliary devices (PAD) and scanning patterns on the accuracy of complete-arch implant digital impressions. METHODS: An edentulous maxillary model was inserted with four parallel implant analogs and four PAD. The model was scanned with D2000 dental laboratory scanner as the reference scans. Test scans were obtained by 8 different scanning patterns (SP), which including SPA, SPB, SPC, SPD, SPE, SPF, SPG and SPH, with (test group) or without (control group) using the PAD by an intraoral scanner (Aoralscan 3, 3DShining). SPA was the scanning pattern recommended by the manufacturer. Each scanning time was recorded. The related files were imported into inspection software for assessment. Aligned Ranks Transformation ANOVA, Kruskal-Wallis and Mann-Whitney tests were used to evaluate the values. The level of significance was set at α = 0.05. RESULTS: The scanning patterns significantly influenced the linear accuracy in the test group and the scanning time for both groups. Lower linear trueness in the test group was found in SPF (p<0.05) and SPG (p<0.05). Longer scanning time was found in SPB and SPG for both groups. The test group demonstrated linear accuracy enhancement in all the scanning patterns; angular trueness enhancement was seen in SPA (p<0.05), SPC (p<0.01) and SPH (p<0.01). Significant longer scanning time was found in SPB (p<0.05), SPF (p<0.05), SPG (p<0.05) and SPH (p<0.05) when using PAD. CONCLUSION: The scanning patterns impact the accuracy differently depending on the PAD's existence. The scanning time can be significantly influenced by the scanning patterns and the PAD. CLINICAL SIGNIFICANCE: In daily clinical practice, selecting a suitable scanning pattern is significant in achieving accurate digital impressions. The PAD demonstrated effective linear accuracy enhancement in all the scanning patterns tested.

Calcitonin gene-related peptide-modulated macrophage phenotypic alteration regulates angiogenesis in early bone healing.

OBJECTIVES: This study aimed to investigate the effect of calcitonin gene-related peptide (CGRP) on the temporal alteration of macrophage phenotypes and macrophage-regulated angiogenesis duringearlybonehealing and preliminarily elucidate the mechanism. METHODS: In vivo, the rat mandibular defect models were established with inferior alveolar nerve transection (IANT) or CGRP receptor antagonist injection. Radiographicandhistologic assessments for osteogenesis, angiogenesis, and macrophage phenotypic alteration within bone defects were performed. In vitro, the effect and mechanism of CGRP on macrophage polarization and phenotypic alteration were analyzed. Then the conditioned medium (CM) from CGRP-treated M1 or M2 macrophages was used to culture human umbilical vein endothelial cells (HUVECs), and the CGRP's effect on macrophage-regulated angiogenesis was detected. RESULTS: Comparable changes following IANT and CGRP blockade within bone defects were observed, including the suppression of early osteogenesis and angiogenesis, the prolonged M1 macrophage infiltration and the prohibited transition toward M2 macrophages around vascular endothelium. In vitro experiments showed that CGRP promoted M2 macrophage polarization while upregulating the expression of interleukin 6 (IL-6), a major cytokine that facilitates the transition from M1 to M2-dominant stage, in M1 macrophages via the activation of Yes-associated protein 1. Moreover, CGRP-treated macrophage-CM showed an anabolic effect on HUVECs angiogenesis compared with macrophage-CM and might prevail over the direct effect of CGRP on HUVECs. CONCLUSIONS: Collectively, our results reveal the effect of CGRP on M1 to M2 macrophage phenotypic alteration possibly via upregulating IL-6 in M1 macrophages, and demonstrate the macrophage-regulated pro-angiogenic potential of CGRP in early bone healing.

Size-Dependent Effect of Titania Nanotubes on Endoplasmic Reticulum Stress to Re-establish Diabetic Macrophages Homeostasis.

In patients with diabetes, endoplasmic reticulum stress (ERS) is a crucial disrupting factor of macrophage homeostasis surrounding implants, which remains an obstacle to oral implantation success. Notably, the ERS might be modulated by the implant surface morphology. Titania nanotubes (TNTs) may enhance diabetic osseointegration. However, a consensus has not been achieved regarding the tube-size-dependent effect and the underlying mechanism of TNTs on diabetic macrophage ERS. We manufactured TNTs with small (30 nm) and large diameters (100 nm). Next, we assessed how the different titanium surfaces affected diabetic macrophages and regulated ERS and Ca2+ homeostasis. TNTs alleviated the inflammatory response, oxidative stress, and ERS in diabetic macrophages. Furthermore, TNT30 was superior to TNT100. Inhibiting ERS abolished the positive effect of TNT30. Mechanistically, topography-induced extracellular Ca2+ influx might mitigate excessive ERS in macrophages by alleviating ER Ca2+ depletion and IP3R activation. Furthermore, TNT30 attenuated the peri-implant inflammatory response and promoted osseointegration in diabetic rats. TNTs with small nanodiameters attenuated ERS and re-established diabetic macrophage hemostasis by inhibiting IP3R-induced ER Ca2+ depletion.

Single missing molar with wide mesiodistal length restored using a single or double implant-supported crown: A self-controlled case report and 3D finite element analysis.

PURPOSE: Based on a self-controlled case, this study evaluated the finite element analysis (FEA) results of a single missing molar with wide mesiodistal length (MDL) restored by a single or double implant-supported crown. METHODS: A case of a missing bilateral mandibular first molar with wide MDL was restored using a single or double implant-supported crown. The implant survival and peri-implant bone were compared. FEA was conducted in coordination with the case using eight models with different MDLs (12, 13, 14, and 15 mm). Von Mises stress was calculated in the FEA to evaluate the biomechanical responses of the implants under increasing vertical and lateral loading, including the stress values of the implant, abutment, screw, crown, and cortical bone. RESULTS: The restorations on the left and right sides supported by double implants have been used for 6 and 12 years, respectively, and so far have shown excellent osseointegration radiographically.The von Mises stress calculated in the FEA showed that when the MDL was >14 mm, both the bone and prosthetic components bore more stress in the single implant-supported strategy. The strength was 188.62-201.37 MPa and 201.85-215.9 MPa when the MDL was 14 mm and 15 mm, respectively, which significantly exceeded the allowable yield stress (180 MPa). CONCLUSIONS: Compared with the single implant-supported crown, the double implant-supported crown reduced peri-implant bone stress and produced a more appropriate stress transfer model at the implant-bone interface when the MDL of the single missing molar was ≥14 mm.

Mettl3­mediated m6A RNA methylation regulates osteolysis induced by titanium particles.

Peri­prosthetic osteolysis (PPO) induced by wear particles is considered the primary cause of titanium prosthesis failure and revision surgery. The specific molecular mechanisms involve titanium particles inducing multiple intracellular pathways, which impact disease prevention and the targeted therapy of PPO. Notably, N6­methyladenosine (m6A) serves critical roles in epigenetic regulation, particularly in bone metabolism and inflammatory responses. Thus, the present study aimed to determine the role of RNA methylation in titanium particle­induced osteolysis. Results of reverse transcription­quantitative PCR (RT­qPCR), western blotting, ELISA and RNA dot blot assays revealed that titanium particles induced osteogenic inhibition and proinflammatory responses, accompanied by the reduced expression of methyltransferase­like (Mettl) 3, a key component of m6A methyltransferase. Specific lentiviruses vectors were employed for Mettl3 knockdown and overexpression experiments. RT­qPCR, western blotting and ELISA revealed that the knockdown of Mettl3 induced osteogenic inhibition and proinflammatory responses comparable with that induced by titanium particle, while Mettl3 overexpression attenuated titanium particle­induced cellular reactions. Methylated RNA immunoprecipitation­qPCR results revealed that titanium particles mediated the methylation of two inhibitory molecules, namely Smad7 and SMAD specific E3 ubiquitin protein ligase 1, via Mettl3 in bone morphogenetic protein signaling, leading to osteogenic inhibition. Furthermore, titanium particles induced activation of the nucleotide binding oligomerization domain 1 signaling pathway through methylation regulation, and the subsequent activation of the MAPK and NF­κB pathways. Collectively, the results of the present study indicated that titanium particles utilized Mettl3 as an upstream regulatory molecule to induce osteogenic inhibition and inflammatory responses. Thus, the present study may provide novel insights into potential therapeutic targets for aseptic loosening in titanium prostheses.

Changes of dental anxiety, aesthetic perception and oral health-related quality of life related to influencing factors of patients' demographics after anterior implant treatment: a prospective study.

BACKGROUND: Accumulating evidence has revealed the effects of anterior implant procedures on dental anxiety (DA), aesthetic perception and oral health-related quality of life (OHRQoL). However, few reported the changes and influencing factors of the above outcomes before and after anterior implant treatment. This study was to evaluate the changes of DA, aesthetic perception and OHRQoL related to influencing factors of patients' demographics after anterior implant treatment. METHODS: Thirty-nine patients satisfying the inclusion criteria were prospectively recruited before surgery. The subjects completed the Modified Dental Anxiety Scale (MDAS), the Orofacial Esthetic Scale (OSE) and the Oral Health Impact Profile-14 (OHIP-14), before implant surgery and after definitive prosthesis placement. Mann-Whitney U test and Kruskal-Wallis test by Bonferroni correction were applied for the data analysis and the influencing factors evaluation (p < 0.05). RESULTS: Overall, 39 patients (mean age of 44.9 ± 12.0) completed the three scales. After anterior implant treatment, MDAS was not significantly changed (p > 0.05). The overall OSE (p < 0.001) and OHIP-14 (p < 0.05) were significantly improved. Females showed more improvement of overall OHIP score than males after anterior implant treatment (p < 0.05). CONCLUSIONS: Anterior implant procedures did not change the level of patient's DA, while aesthetic perception and OHRQoL were enhanced. Only gender difference of overall OHIP change was found in our study. Thus, more related influencing factors with larger sample and long-term effective follow-up are needed. TRIAL REGISTRATION: ClinicalTrials.gov, NCT05424458. Registered 13 June 2022-Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT05424458 .

Optimizing the combined soft tissue repair and osteogenesis using double surfaces of crosslinked collagen scaffolds.

Excessive tissue damage or loss has been solved by guided tissue regeneration and guided bone regeneration theories. However, the unfavorable degradation property of the resorbable collagen scaffold brings a big challenge to support soft tissue stabilization and time-consuming osteogenesis. The combined effect for soft tissue and bone of the collagen scaffold with better degradation pattern has not been clearly proven. This study determined whether the double surfaces of crosslinked collagen scaffolds could optimize the combined soft tissue repair and osteogenesis. In this study, we applied the chemically crosslinking treatment to the commercially available collagen scaffolds. Surface characterization, mechanical property and cell proliferation in vitro were evaluated. Combined bilateral skin and bone defects were established with the smooth surface of scaffold facing the skin defect and the rough surface facing the bone defect on the calvaria of rat. Micro-CT and histological evaluation were applied to determine the scaffold degradation pattern, soft tissue repair and osteogenesis. The crosslinked collagen scaffolds showed comparably favorable surface porosity, structure intactness, superhydrophilicity and mechanical properties. Compared to the native scaffolds, the crosslinked scaffolds could optimize the combined soft tissue repair and osteogenesis by preferably prolonged degradation time. Early pro-angiogenesis facilitated soft tissue repair and osteogenesis by upregulated soft tissue matrix degradation and balanced pro-osteogenesis with limited osteoclast-mediated bone resorption. Taken together, this study offers a promising repair strategy for the combined soft tissue and bone defects. Further, the possible mechanism of controllable scaffold degradation should be conducted.

Near-infrared light-responsive multifunctional hydrogel releasing peptide-functionalized gold nanorods sequentially for diabetic wound healing.

Treatment for chronic diabetic wounds remains a clinical challenge. Wound healing process occurs in three phases: inflammation, proliferation and remodeling. Several factors including bacterial infection, decreased local angiogenesis and diminished blood supply delay wound healing. There is an urgent need to develop wound dressings with multiple biological effects for different stages of diabetic wound healing. Here, we develop a multifunctional hydrogel with two-stage sequential release upon near-infrared (NIR) stimulation, antibacterial activity and pro-angiogenic efficacy. This hydrogel consists of covalently crosslinked bilayer structure, with the lower thermoresponsive poly(N-isopropylacrylamide)/gelatin methacrylate (NG) layer and the upper highly stretchable alginate/polyacrylamide (AP) layer embedding different peptide-functionalized gold nanorods (AuNRs) in each layer. Antimicrobial peptide-functionalized AuNRs released from NG layer exert antibacterial effects. After NIR irradiation, the photothermal transition efficacy of AuNRs synergistically enhances bactericidal efficacy. The contraction of thermoresponsive layer also promotes the release of embedded cargos during early stage. The pro-angiogenic peptide-functionalized AuNRs released from AP layer promote angiogenesis and collagen deposition by accelerating fibroblast and endothelial cell proliferation, migration and tube formation during the subsequent healing phases. Therefore, the multifunctional hydrogel with effective antibacterial activity, pro-angiogenic efficacy and sequential release behaviors is a potential biomaterial for diabetic chronic wound healing.

Marginal bone level change during sequential loading periods of partial edentulous rehabilitation using immediately loaded self-tapping implants: a 6.5-year retrospective study.

PURPOSE: A large number of studies have suggested the practicability and predictability of immediate implant function, but few studies have reported marginal bone level changes during sequential loading periods. The purpose of this study was to evaluate the marginal bone remodeling of immediately loaded self-tapping implants both at each time point and during each loading period between two time points. MATERIALS AND METHODS: The patients included in this retrospective study were treated with immediately loaded NobelSpeedy Replace implants between August 2008 and July 2009. Differences in the marginal bone level (MBL) at each time point and the marginal bone level change (ΔMBL) between two time points were analyzed with Bonferroni correction (P < .05). RESULTS: Overall, 24 patients (mean age, 47.3 ± 12.8 years) with 42 immediately loaded implants and a median follow-up of 6.5 years (IQR, 67.8 months) were included. The cumulative survival rate after 10 - 12 years was 95.2%. Continuous but slow marginal bone loss was observed during long-term follow-up. MBL at both 7.5 years and 11 years was significantly lower than that at loading, 6 months, 2 years and 4 years (P < .05). No bone loss difference was found in any period before 4 years of follow up (P > .05). The loading period of 4 years to 7.5 years showed the largest ΔMBL compared to those of other time periods (P < .05). CONCLUSION: Slight bone loss occurred continuously, and more radical changes of marginal bone can be observed during the period of 4-7.5 years. Thus, long-term effective follow-up of immediately loaded implants is needed.

Micro/Nanostructured Topography on Titanium Orchestrates Dendritic Cell Adhesion and Activation via ß2 Integrin-FAK Signals.

Background and Purpose: In clinical application of dental implants, the functional state of dendritic cells (DCs) has been suggested to have a close relationship with the implant survival rate or speed of osseointegration. Although microscale surfaces have a stable osteogenesis property, they also incline to trigger unfavorable DCs activation and threaten the osseointegration process. Nanoscale structures have an advantage in regulating cell immune response through orchestrating cell adhesion, indicating the potential of hierarchical micro/nanostructured surface in regulation of DCs' activation without sacrificing the advantage of microscale topography. Materials and Methods: Two micro/nanostructures were fabricated based on microscale rough surfaces through anodization or alkali treatment, the sand-blasted and acid-etched (SA) surface served as control. The surface characteristics, in vitro and in vivo DC immune reactions and ß2 integrin-FAK signal expression were systematically investigated. The DC responses to different surface topographies after FAK inhibition were also tested. Results: Both micro/nano-modified surfaces exhibited unique composite structures, with higher hydrophilicity and lower roughness compared to the SA surface. The DCs showed relatively immature functional states with round morphologies and significantly downregulated ß2 integrin-FAK levels on micro/nanostructures. Implant surfaces with micro/nano-topographies also triggered lower levels of DC inflammatory responses than SA surfaces in vivo. The inhibited FAK activation effectively reduced the differences in topography-caused DC activation and narrowed the differences in DC activation among the three groups. Conclusion: Compared to the SA surface with solely micro-scale topography, titanium surfaces with hybrid micro/nano-topographies reduced DC inflammatory response by influencing their adhesion states. This regulatory effect was accompanied by the modulation of ß2 integrin-FAK signal expression. The ß2 integrin-FAK-mediated adhesion plays a critical role in topography-induced DC activation, which represents a potential target for material-cell interaction regulation.

Multi-omics analysis of oral bacterial biofilm on titanium oxide nanostructure modified implant surface: In vivo sequencing-based pilot study in beagle dogs.

Peri-implantitis, the major cause of implant failure, is an inflammatory destructive disease due to the dysbiotic polymicrobial communities at the peri-implant sites. Therefore, it is highly warranted to develop the implant materials with antimicrobial properties and investigate their effects on oral microbiota. However, most of the relevant studies were performed in vitro, and insufficient to provide the comprehensive assessment of the antimicrobial capacity of the implant materials in vivo. Herein, we introduce an innovative approach to evaluate the in vivo antibacterial properties of the most commonly used implant materials, titanium with different nanostructured surfaces, and investigate their antibacterial mechanism via the next-generation sequencing (NGS) technology. We firstly prepared the titanium implants with three different surfaces, i) mechanical polishing (MP), ii) TiO2 nanotubes (NT) and iii) nanophase calcium phosphate embedded to TiO2 nanotubes (NTN), and then characterized them using scanning electron microscopy (SEM), energy-dispersive X-ray spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), confocal laser scanning microscopy (CLSM) and surface hydrophilicity analysis. Afterwards, the implants were placed in the beagle dogs' mouths to replace the pre-extracted premolar and molar teeth for eight weeks through implant surgery. The supra- and sub-mucosal plaques were collected and subjected to 16S rRNA gene/RNA sequencing and data analysis. It was found that the nanostructured surfaces in NT and NTN groups showed significantly increased roughness and decreased water contact angles compared to the MP group, while the XPS data further confirmed the successful modifications of TiO2 nanotubes and the subsequent deposition of nanophase calcium phosphate. Notably, the nanostructured surfaces in NT and NTN groups had limited impact on the diversity and community structure of oral microbiota according to the 16S rRNA sequencing results, and the nanostructures in NTN group could down-regulate the genes associated with localization and locomotion based on Gene Ontology (GO) terms enrichment analysis. Moreover, the differentially expressed genes (DEGs) were associated with microbial metabolism, protein synthesis and bacterial invasion of epithelial cells. Taken together, this study provides a new strategy to evaluate the antibacterial properties of the biomedical materials in vivo via the high-throughput sequencing and bioinformatic approaches, revealing the differences of the composition and functional gene expressions in the supra- and sub-mucosal microbiome.

A meta-analysis indicating extra-short implants (≤ 6 mm) as an alternative to longer implants (≥ 8 mm) with bone augmentation.

Extra-short implants, of which clinical outcomes remain controversial, are becoming a potential option rather than long implants with bone augmentation in atrophic partially or totally edentulous jaws. The aim of this study was to compare the clinical outcomes and complications between extra-short implants (≤ 6 mm) and longer implants (≥ 8 mm), with and without bone augmentation procedures. Electronic (via PubMed, Web of Science, EMBASE, Cochrane Library) and manual searches were performed for articles published prior to November 2020. Only randomized controlled trials (RCTs) comparing extra-short implants and longer implants in the same study reporting survival rate with an observation period at least 1 year were selected. Data extraction and methodological quality (AMSTAR-2) was assessed by 2 authors independently. A quantitative meta-analysis was performed to compare the survival rate, marginal bone loss (MBL), biological and prosthesis complication rate. Risk of bias was assessed with the Cochrane risk of bias tool 2 and the quality of evidence was determined with the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach. 21 RCTs were included, among which two were prior registered and 14 adhered to the CONSORT statement. No significant difference was found in the survival rate between extra-short and longer implant at 1- and 3-years follow-up (RR: 1.002, CI 0.981 to 1.024, P = 0.856 at 1 year; RR: 0.996, CI 0.968 to 1.025, P = 0.772 at 3 years, moderate quality), while longer implants had significantly higher survival rate than extra-short implants (RR: 0.970, CI 0.944 to 0.997, P < 0.05) at 5 years. Interestingly, no significant difference was observed when bone augmentations were performed at 5 years (RR: 0.977, CI 0.945 to 1.010, P = 0.171 for reconstructed bone; RR: 0.955, CI 0.912 to 0.999, P < 0.05 for native bone). Both the MBL (from implant placement) (WMD: - 0.22, CI - 0.277 to - 0.164, P < 0.01, low quality) and biological complications rate (RR: 0.321, CI 0.243 to 0.422, P < 0.01, moderate quality) preferred extra-short implants. However, there was no significant difference in terms of MBL (from prosthesis restoration) (WMD: 0.016, CI - 0.036 to 0.068, P = 0.555, moderate quality) or prosthesis complications rate (RR: 1.308, CI 0.893 to 1.915, P = 0.168, moderate quality). The placement of extra-short implants could be an acceptable alternative to longer implants in atrophic posterior arch. Further high-quality RCTs with a long follow-up period are required to corroborate the present outcomes.Registration number The review protocol was registered with PROSPERO (CRD42020155342).

Influence of implant protrusion length on non-grafting osteotome sinus floor elevation with simultaneous implant: a 3- to 9-year retrospective study.

BACKGROUND: This study analyzed the influence of implant protrusion length (IPL) on the possible factors that affect the long-term outcomes utilizing non-grafting osteotome sinus floor elevation (OSFE) with simultaneous implant placement, and to explore the optimal range of IPL. MATERIALS AND METHODS: A retrospective study design was adopted. The clinical and radiographic data of 105 implants in 65 patients were collected after 3-9 (mean 5.04) years follow-up. IPL was divided into three groups (group1, IPL<2mm; group2, 2mm≤IPL<4mm; group3, IPL≥4mm). Endo-sinus bone gain (ESBG), peri-implant marginal bone loss (MBL), bone to implant contact length (BICL), and percentage of ESBG (%ESBG) were used to evaluate non-grafting OSFE. A Kaplan-Meier analysis was performed to assess the cumulative survival rate. Multiple linear regression model was used to explore the relationship between the possible influence factors and ESBG. Analysis of variance (ANOVA) was applied to explore the correlation of IPL with ESBG, MBL, BICL, and %ESBG. RESULTS: A total of 102 implants in 62 patients fulfilled the survival criteria, giving the cumulative survival rates of 96.4% and 94.1% for implant-based analysis and patient-based analysis, respectively. The mean ESBG, MBL, and BICL at the latest follow-up were 1.95±0.88 mm, 0.58±0.68 mm, and 5.51±1.47 mm. ESBG was found to be positively correlated to IPL. A significant decreased bone formation efficiency was found when IPL was over 4 mm (P=0.02). CONCLUSIONS: An optimal range of IPL within 4 mm was recommended for better long-term outcomes when applying non-grafting OSFE with simultaneous implant placement.