Particle size distribution of total suspended sediments in urban stormwater runoff: Effect of land uses, precipitation conditions, and seasonal variations.

Understanding particle size distribution (PSD) of total suspended sediments in urban runoff is essential for pollutant fate and designing effective stormwater treatment measures. However, the PSDs from different land uses under different weather conditions have yet to be sufficiently studied. This research conducted a six-year water sampling program in 15 study sites to analyze the PSD of total suspended sediments in runoff. The results revealed that the median particle size decreased in the order: paved residential, commercial, gravel lane residential, mixed land use, industrial, and roads. Fine particles less than 125 µm are the dominant particles (over 75%) of total suspended sediments in runoff in Calgary, Alberta, Canada. Roads have the largest percentage of particles finer than 32 µm (49%). Gravel lane residential areas have finer particle sizes than paved residential areas. The results of PSD were compared with previous literature to provide more comprehensive information about PSD from different land uses. The impact of rainfall event types can vary depending on land use types. A long antecedent dry period tends to result in the accumulation of fine particles on urban surfaces. High rainfall intensity and long duration can wash off more coarse particles. The PSD in spring exhibits the finest particles, while fall has the largest percentage of coarse particles. Snowmelt particles are finer for the same land use than that during rainfall events because the rainfall-runoff flows are usually larger than the snowmelt flows.

Land cover based simulation of urban stormwater runoff and pollutant loading.

Urban stormwater models such as PCSWMM are important tools for evaluating urban stormwater quantity and quality. However, due to the lack of consideration of land covers, traditional catchment delineation methods have defects in model precision, parameter transferability and assessment of contribution from individual land cover types. This paper used PCSWMM model as a foundation, built a new land-cover based (LCB) model and made a systematic comparison with the traditional watershed delineation tool (WDT) model to study the impacts of land cover on the simulation of stormwater runoff and pollutant loading. The models were applied to two urban catchments in Calgary, Canada. The results revealed that the LCB model performed better than the WDT model in hydrological simulation, and land cover consideration can considerably improve model accuracy. The two models showed comparable performances in simulation of total suspended solids (TSS), total nitrogen (TN), and total phosphorus (TP) loading. The LCB model parameters could be regionalized based on land cover types. The hydrologic-hydraulic parameters can be satisfactorily transferred from neighboring gauged catchments to similar ungauged catchments. The transferring of water quality parameters did not perform as satisfactory. The LCB model could quantitively evaluate the contribution to runoff and pollutant loads of different land covers. Roads and roofs were found to be the major contributors to urban runoff and pollutants in the two urban catchments. Green space became important only during large storms events and its contribution could be ignored during dryer years.

Effects of mixed land use on urban stormwater quality under different rainfall event types.

The joint effect of mixed land uses and rainfall event types was studied using a two-year field monitoring program in four urban catchments in Calgary, Alberta, Canada. Event mean concentration (EMC) and event pollutant load (EPL) were employed to evaluate the total suspended sediment (TSS), nitrogen and phosphorus. The correlation analysis showed that most nitrogen and phosphorus components (except for NO2-/NO3- and TDP) predominantly exist in particulate form in the study areas. The correlation for EPL was notably stronger than EMC, which can be attributed to varying rainfall characteristics. The differences in EMCs and EPLs of TSS, nitrogen and phosphorus across catchments indicated that the complexity and spatial distribution of mixed land use can influence the generation and transportation of pollutants in urban runoff. The impacts of rainfall characteristics on stormwater quality are integrated rather than driven by a single rainfall characteristic. Brief but intense events tended to elevate TSS, nitrogen and phosphorus concentrations, especially in complex land-use catchments. Events with long antecedent dry days and short duration also resulted in increased pollutant concentrations, while events with long duration and low intensity could result in higher EPLs. The effect of mixed land use on water quality can vary depending on rainfall event types. Seasonal variations were found in EMC and EPL of TSS, nitrogen and phosphorus, with higher values in the spring and summer than the fall. Seasonal variations are mainly influenced by rainfall conditions, temperature and anthropogenic activities (e.g. lawn fertilization and de-icing with sands). MLR considering rainfall characteristics is an effective method for predicting stormwater quality within a single catchment. Considering complexity and spatial distribution of mixed land use can improve the accuracy of the harmonized MLR model. This research provided insights into understanding the complexities introduced by mixed land use and rainfall event types in urban stormwater quality.

Impact of rainfall characteristics on urban stormwater quality using data mining framework.

Understanding the impact of rainfall characteristics on urban stormwater quality is important for stormwater management. Even though significant attempts have been undertaken to study the relationship between rainfall and urban stormwater quality, the knowledge developed may be difficult to apply in commercial stormwater management models. A data mining framework was proposed to study the impacts of rainfall characteristics on stormwater quality. A rainfall type-based calibration approach was developed to improve water quality model performance. Specifically, the relationship between rainfall characteristics and stormwater quality was studied using principal component analysis and correlation analysis. Rainfall events were classified using a K-means clustering method based on the selected rainfall characteristics. A rainfall type-based (RTB) model was independently calibrated for each rainfall type to obtain optimal parameter sets of stormwater quality models. The results revealed that antecedent dry days, average rainfall intensity, and rainfall duration were the most critical rainfall characteristics affecting the event mean concentrations (EMCs) of total suspended solids, total nitrogen, and total phosphorus, while total rainfall was found to be of negligible importance. The K-means method effectively clustered the rainfall events into four types that could represent the rainfall characteristics in the study areas. The rainfall type-based calibration approach can considerably improve water quality model accuracy. Compared to the traditional continuous simulation model, the relative error of the RTB model was reduced by 11.4 % to 16.4 % over the calibration period. The calibrated stormwater quality parameters can be transferred to adjacent catchments with similar characteristics.

Deformable link segment analysis for prosthetic foot-ankle components: Kinematics.

Approaches in the literature for estimating prosthetic foot-ankle power typically require calculating the segment deformation velocity. This, in turn, necessitates approximating the segment angular velocity. Methods can be distinguished by the way in which a segment is defined and the assumptions used for estimating the segment angular velocity. However, isolating foot-ankle performance from overall prosthetic system performance is limited by uncertainties in the definition of angular velocity of a deformable segment. A deformable link segment (DLS) analysis is proposed that provides a means for estimating deformation velocity of a deformable segment without first approximating the angular velocity: the deformation velocity and angular velocity are solved simultaneously at each instant during the stance phase of gait. DLS analysis was compared to two approaches in the literature: the distal foot (DF) model and the unified deformable (UD) segment model during over-ground walking for three trans-tibial prosthesis users. DLS and UD segment estimates of deformation velocity were comparable when applied to the UD segment. Furthermore, DLS analysis enables modelling of deformable prosthetic foot-ankle components separately from other prosthetic componentry. The method is proposed as a rigorous approach to estimating angular velocity and deformation velocity of passive prosthetic foot-ankle components for subsequent calculation of deformation power and energy performance of these devices.