RESUMO
Low-dimensional Ruddlesden-Popper phase (LDRP) perovskites are widely studied in the field of photovoltaics due to their tunable energy-band properties, enhanced photostability, and improved environmental stability compared to the 3D perovskites. However, the insulating spacers with weak intramolecular interaction used in LDRP materials limit the out-of-plane charge transport, leading to poor device performance of LDRP perovskite solar cells (PSCs). Here, a functional ligand, 3-guanidinopropanoic acid (GPA), which is capable of forming strong intramolecular hydrogen bonds through the carboxylic acid group, is employed as an organic spacer for LDRP PSCs. Owing to the strong interaction between GPA molecules, high-quality LDRP (GPA)2(MA)n-1PbnI3n+1 film with promoted formation of n = 5 phase, improved crystallinity, preferential vertical growth orientations, reduced trap-state density, and prolonged carrier lifetime is achieved using GPAI as the dimensionality regulator compared to butylamine hydroiodide (BAI). As a result, GPA-based LDRP PSC exhibits a champion power conversion efficiency of 18.16% that is much superior to the BA-based LDRP PSC (15.43%). Importantly, the optimized GPA-based LDRP PSCs without encapsulation show enhanced illumination, thermal, storage, and humidity stability compared to BA-based ones. This work provides new insights into producing high n value LDRP films and their efficient and stable PSCs.
RESUMO
The stability of aqueous Zn-ion batteries (AZIBs) is detrimentally influenced by the formation of Zn dendrites and the occurrence of parasitic side reactions at the Zn metal anode (ZMA)-electrolyte interface. The strategic manipulation of the preferential crystal orientation during Zn2+ plating serves as an essential approach to mitigate this issue. Here, Zn aspartate (Zn-Asp), an electrolyte additive for AZIBs, is introduced not only to optimize the solvation structure of Zn2+ , but also to crucially promote preferential Zn2+ plating on the (002) crystal plane of ZMA. As a result, both side reactions and Zn dendrites are effectively inhibited, ensuring an anode surface free of both dendrites and by-products. The implementation of Zn-Asp leads to significant enhancements in both Zn||Zn symmetric and Zn||Ti batteries, which demonstrate robust cyclability of over 3200 h and high Coulombic efficiency of 99.29%, respectively. Additionally, the Zn||NaV3 O8 ·1.5H2 O full battery exhibits remarkable rate capability, realizing a high capacity of 240.77 mA h g-1 at 5 A g-1 , and retains 92.7% of its initial capacity after 1000 cycles. This research underscores the vital role of electrolyte additives in regulating the preferential crystal orientation of ZMA, thereby contributing to the development of high-performing AZIBs.
RESUMO
In this paper, the bilayer polymer-dispersed liquid crystals possessing a PDLC-PVA-PDLC structure were prepared by integrating two monolayer PDLCs. The effect of the polymer mesh size on the electro-optical properties of a bilayer PDLC was investigated by comparing the micro-morphology and electro-optical curves under different polymerization conditions. In addition, the impact of doping MoO2 nanoparticles with surface modification on the comprehensive performance of the bilayer PDLC was further researched. The contrast ratio of the bilayer PDLC prepared under the optimal conditions was improved by more than 90% and still maintained excellent progressive driving performance. Therefore, the development of a bilayer PDLC with optimal electro-optical properties will significantly enhance the technological prospects for the application of PDLC-based devices in smart windows, displays, and flexible devices.
RESUMO
The realization of multifunctional advanced displays with better electro-optical properties is especially crucial at present. However, conventional integral full drive-based transparent display is increasingly failing to meet the demands of the day. Herein, partitioned polymerization as a novel preparation method was introduced innovatively into polymer-dispersed liquid crystals (PDLC) for realizing a step-driven display in agreement with fluorescent dye to solve the above drawback. At first, the utilization of fluorescent dye to endow the PDLC film with fluorescent properties resulted in a reduction in the saturation voltage of the PDLC from 39.7 V to 25.5 V and an increase in the contrast ratio from 58.4 to 96.6. Meanwhile, the experimental observations and theoretical considerations have elucidated that variation in microscopic pore size can significantly influence the electro-optical behavior of PDLC. Then, the step-driven PDLC film was fabricated through the exposure of different regions of the LC cell to different UV-light intensities, resulting in stepwise voltage-transmittance (V-T) responses of the PDLC film for the corresponding regions. Consequently, under appropriate driving voltages, the PDLC can realize three different states of total scattering, semi-transparent and total transparent, respectively. In addition, the PDLC film also embodied an outstanding anti-aging property and UV-shielding performance, which makes it fascinating for multifunctional advanced display applications.
RESUMO
Using the polymerization-induced phase separation (PIPS) method, bilayer polymer-dispersed liquid crystal (PDLC) films with a PDLC-PVA-PDLC structure were prepared in this work. It was found that all PDLC performance indexes were affected by polymer mesh size after comparing the microscopic morphology and electro-optical properties of samples with different monomer ratios. Gd2O3 nanoparticles and rhodamine B base fluorescent dyes introduced into the bilayer PDLC optimized the samples' electro-optical properties and developed new functionalities. In addition, the bilayer PDLC doped with Gd2O3 and rhodamine B base held excellent progressive driving functions as well as stable durability properties. Samples doped with Gd2O3 nanoparticles and rhodamine B base also produced excellent anti-counterfeiting effects under UV irradiation at different angles, further exploiting the application potential of PDLC.
RESUMO
To improve the mess-specific activity of Co supported on zeolite catalysts in Fischer-Tropsch (FT) synthesis, the Co-MCM-22 catalyst was prepared by simply grinding the MCM-22 with nanosized Co3O4 prefabricated by the thermal decomposition of the Co(II)-glycine complex. It is found that this novel strategy is effective for improving the mess-specific activity of Co catalysts in FT synthesis compared to the impregnation method. Moreover, the ion exchange and calcination sequence of MCM-22 has a significant influence on the dispersion, particle size distribution, and reduction degree of Co. The Co-MCM-22 prepared by the physical grinding of prefabricated Co3O4 and H+-type MCM-22 without a further calcination process exhibits a moderate interaction between Co3O4 and MCM-22, which results in the higher reduction degree, higher dispersion, and higher mess-specific activity of Co. Thus, the newly developed method is more controllable and promising for the synthesis of metal-supported catalysts.
RESUMO
Bistable cholesteric liquid crystals have promising application prospects in various fields, such as smart windows and displays. However, the long-term stability of two individual states is not easy to achieve, hindering their practical use. In this research, the bistable feature was enhanced by constructing a microsphere-type polymer with a liquid-crystalline epoxy/thiol monomer in negative dielectric anisotropic cholesteric liquid crystals. Spectroscopic and optical examinations revealed that either the transparent planar state or the opaque focal conic state can be maintained without the aid of an external field. Moreover, they can be switched to each other by applying a high- or low-frequency electric field. Further, factors such as the chemical structure of thiol compounds, curing temperature and curing time were investigated to explore their influences on the micro morphology of the polymer and thereby the electro-optical properties. In addition, the frequency-dependent driving scheme was analysed. Finally, bistable switching was demonstrated using an optimized sample. This energy-efficient bistable film shines light on future applications in smart windows, photonic paper and other electro-optical devices.
RESUMO
Supported Pt-based catalysts have been identified as highly selective catalysts for CO oxidation, but their potential for applications has been hampered by the high cost and scarcity of Pt metals as well as aggregation problems at relatively high temperatures. In this work, nanorod structured (TiO2-Pt)/CeO2 catalysts with the addition of 0.3 at% Pt and different atomic ratios of Ti were prepared through a combined dealloying and calcination method. XRD, XPS, SEM, TEM, and STEM measurements were used to confirm the phase composition, surface morphology, and structure of synthesized samples. After calcination treatment, Pt nanoparticles were semi-inlayed on the surface of the CeO2 nanorod, and TiO2 was highly dispersed into the catalyst system, resulting in the formation of (TiO2-Pt)/CeO2 with high specific surface area and large pore volume. The unique structure can provide more reaction path and active sites for catalytic CO oxidation, thus contributing to the generation of catalysts with high catalytic activity. The outstanding catalytic performance is ascribed to the stable structure and proper TiO2 doping as well as the combined effect of Pt, TiO2, and CeO2. The research results are of importance for further development of high catalytic performance nanoporous catalytic materials.
Assuntos
Nanopartículas , Nanotubos , Oxirredução , CatáliseRESUMO
Electromagnetic shielding materials are special materials that can effectively absorb and shield electromagnetic waves and protect electronic devices and electronic circuits from interference and damage by electromagnetic radiation. This paper presents the research progress of intrinsically conductive polymer materials and conductive polymer-based composites for electromagnetic shielding as well as an introduction to lightweight polymer composites with multicomponent systems. These materials have excellent electromagnetic interference shielding properties and have the advantages of electromagnetic wave absorption and higher electromagnetic shielding effectiveness compared with conventional electromagnetic shielding materials, but these materials still have their own shortcomings. Finally, the paper also discusses the future opportunities and challenges of intrinsically conductive polymers and composites containing a conductive polymer matrix for electromagnetic shielding applications.
RESUMO
In this study, polymer-dispersed liquid crystal (PDLC) membranes were prepared by combining prepolymer, liquid crystal, and nanofiber mesh membranes under UV irradiation. EM, POM, and electro-optic curves were then used to examine the modified polymer network structure and the electro-optical properties of these samples. As a result, the PDLCs with a specific amount of reticular nanofiber films had considerably improved electro-optical characteristics and antiaging capabilities. The advancement of PDLC incorporated with reticulated nanofiber films, which exhibited a faster response time and superior electro-optical properties, would greatly enhance the technological application prospects of PDLC-based smart windows, displays, power storage, and flexible gadgets.
RESUMO
Brightening polymer-stabilized bistable cholesteric liquid crystal (PSBCLC) films with doped fluorescent dyes were prepared using the polymerization-induced phase separation (PIPS) method. The transmittance performance behavior of these films in both states (focal conic and planar) and absorbance change in multiple dye concentrations were studied using a UV/VIS/NIR spectrophotometer. The change occurring in dye dispersion morphology with different concentrations was obtained by means of the polarizing optical microscope. The maximum fluorescence intensity of different dye-doped PSBCLC films was measured using a fluorescence spectrophotometer. Moreover, the contrast ratios and driving voltages of these films were calculated and recorded to demonstrate film performance. Finally, the optimal concentration of dye-doped PSBCLC films with a high contrast ratio and a relatively low drive voltage was found. This is expected to have great potential applications in cholesteric liquid crystal reflective displays.
RESUMO
By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5â V, a maximum power efficiency and an external quantum efficiency (ηext ) of 89.8â lm W-1 and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000â cd m-2 and a roll-off of 15.9 % at an extremely high brightness of 10000â cd m-2 . This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.
RESUMO
A high-yielding click reaction was used to synthesize a series of highly conjugated, symmetrical, as well as asymmetrical compounds with a benzene core. Cyclic voltammetry and ultraviolet/visible absorption spectroscopy were carried out, and proved that the side groups of the benzene derivatives played an important role in the energy gaps, and affected the third-order non-linear optical response. The maximum absorption wavelength of the series of benzene derivatives showed an obvious red-shift. Moreover, the addition of resilient electron-withdrawing groups significantly narrowed the energy levels as compared with precursors. The third-order nonlinear properties of this benzene derivative were tested by the Z-scan technique. The expected properties of this series of molecules were obtained, and it was found that the series of molecules undergoes a transition from reverse saturable absorption to saturable absorption, which has certain reference significance for a nonlinear optical field.
RESUMO
In this paper, inorganic oxide MgO nanoparticles-doped polymer dispersed liquid crystal (PDLC) films were made from a mixture of the prepolymer, SLC1717 liquid crystal, and MgO nanoparticles by the polymerization induced phase separation (PIPS) process. To observe the effect of MgO concentration, PDLC was dispersed with 0.2, 0.4, 0.6, and 0.8 wt.% MgO. Electro-optical properties of the films have been investigated using LCD parameter meter and Scanning Electron Microscope (SEM) at room temperature. It is established that MgO nanoparticles affect the microstructure of PDLC films significantly because of the formed agglomerates of MgO nanoparticles. Results show an improvement in the electro-optical properties and a decrease in the driving voltage for doped systems with MgO nanoparticles. When the doping amount of MgO is 0.8 wt.%, the threshold voltage (Vth) is reduced to about 7.5 V. Therefore, MgO-doped PDLC is expected to become an excellent choice in the field of energy-saving.
RESUMO
To investigate the self-assembly behavior of π-conjugated ethynyl-pyrene discotic derivatives, a series of ethynyl-pyrene discotic materials were designed and synthesized by Sonogashira coupling reaction. The π-conjugated structures were characterized by 1H-NMR, IR spectroscopy, and elemental analysis. The optical properties of the discotic materials were examined by UV/Vis spectra and fluorescence emission spectra. The band gap of each compound was calculated by cyclic voltammetry with UV/Vis spectroscopy. Interestingly, the substituted groups in the four symmetrical positions did affect the self-assembly properties of as-resulted nano/micro structures. Under the same conditions, compounds 4a-4d could be self-assembled into different morphologies such as micro-tubes (for 4a), micro-wires (for 4b and 4c), and micro-grain crystals (for 4d). All of the results indicated that the discotic materials have the potential for optoelectronic applications.
RESUMO
Some conjugated benzene ring molecules were prepared using the Sonogashira reaction, and the molecules were post-functionally modified using click chemistry. The optical and electrical band gaps were measured using UV-VIS absorption spectroscopy and the three-electrode method, and the results of both were verified against each other to prove the accuracy of the characterization. In addition, the optical performances of the material were studied by z-scan; almost all materials exhibited good nonlinear optical properties and interconversion between saturable and anti-saturable absorption due to the invocation of click reagents.
RESUMO
Spiking neural P systems (SN P systems for short) realize the high abstraction and simulation of the working mechanism of the human brain, and adopts spikes for information encoding and processing, which are regarded as one of the third-generation neural network models. In the nervous system, the conduction of excitation depends on the presence of membrane potential (also known as the transmembrane potential difference), and the conduction of excitation on neurons is the conduction of action potentials. On the basis of the SN P systems with polarizations, in which the neuron-associated polarization is the trigger condition of the rule, the concept of neuronal membrane potential is introduced into systems. The obtained variant of the SN P system features charge accumulation and computation within neurons in quantity, as well as transmission between neurons. In addition, there are inhibitory synapses between neurons that inhibit excitatory transmission, and as such, synapses cause postsynaptic neurons to generate inhibitory postsynaptic potentials. Therefore, to make the model better fit the biological facts, inhibitory rules and anti-spikes are also adopted to obtain the spiking neural P systems with membrane potentials, inhibitory rules, and anti-spikes (referred to as the MPAIRSN P systems). The Turing universality of the MPAIRSN P systems as number generating and accepting devices is demonstrated. On the basis of the above working mechanism of the system, a small universal MPAIRSN P system with 95 neurons for computing functions is designed. The comparisons with other SN P models conclude that fewer neurons are required by the MPAIRSN P systems to realize universality.
RESUMO
In this work, two silicon nanostructures were doped into polymer/nematic liquid crystal composites to regulate the electric-optical performance. Commercial SiO2nanoparticles and synthesized thiol polyhedral oligomeric silsesquioxane (POSS-SH) were chosen as the dopants to afford the silicon nanostructures. SiO2nanoparticles were physically dispersed in the composites and the nanostructure from POSS-SH was implanted into the polymer matrix of the composites via photoinduced thiol-ene crosslinking. Scanning electron microscopy results indicated that the implantation of POSS microstructure into the polymer matrix was conducive to obtaining the uniform porous polymer microstructures in the composites while the introduction of SiO2nanoparticles led to the loose and heterogeneous polymer morphologies. The electric-optical performance test results also demonstrated that the electric-optical performance regulation effect of POSS microstructure was more obvious than that of SiO2nanoparticles. The driving voltage was reduced by almost 80% if the concentration of POSS-SH in the composite was nearly 8 wt% and the sample could be completely driven by the electric field whose voltage was lower than the safe voltage for continuous contact (24 V). This work could provide a creative approach for the regulation of electric-optical performance for polymer/nematic liquid crystal composites and the fabrication of low voltage-driven PDLC films for smart windows.
RESUMO
Orthogonal frequency division multiplexing (OFDM) chirp waveform, which is composed of two or more successive identical linear frequency modulated sub pulses, is a newly proposed orthogonal waveform scheme for multi-input multi-output (MIMO) synthetic aperture radar (SAR) systems. However, according to the waveform model, there will be range ambiguity if the mapping width exceeds the maximum unambiguous width determined by the transmitted signal. This greatly limits its application in high-resolution wide-swath (HRWS) remote sensing. The traditional system divides the echoes by digital beam forming (DBF) to solve this problem, but the energy utilization rate is low. A MIMO-SAR system using simultaneous digital beam forming of both transceiver and receiver to avoid range ambiguity is designed in this paper. Compared with traditional system, the novel system designed in this paper obtain higher energy utilization and waveform orthogonality.
RESUMO
The present study was conducted to assess the relative bioavailability of selenium (Se) as Se yeast (SY) relative to sodium selenite (SS) for broilers fed a conventional corn-soybean meal diet. A total of 360 one-d-old Arbor Acres commercial broilers were randomly assigned to 5 treatments with 6 replicates per treatment in a completely randomized design involving a 2 (Se sources: SY and SS) × 2 (added Se levels: 0.20 and 0.40 mg Se/kg) factorial design of treatments plus 1 (a Se-unsupplemented control diet) for 42 days. The results showed that Se concentrations in plasma, liver, heart, breast muscle, pancreas and kidney of broilers on d 21 and 42, glutathione peroxidase (GSH-Px) activity in the pancreas on d 21 as well as in the breast muscle and pancreas on d 42, and GSH-Px mRNA levels in the liver, heart, breast muscle and pancreas on d 21 increased linearly (p < .03) as levels of added Se increased. Furthermore, a difference (p ≤ .05) between SY and SS was detected for Se concentrations in plasma, liver, heart, breast muscle, pancreas and kidney, GSH-Px activity in pancreas on both d 21 and 42, as well as pancreatic GSH-Px mRNA level on d 21. Based on slope ratios from the multiple linear regressions of the above indices, the Se bioavailabilities of SY relative to SS (100%) were 111%-394% (p ≤ .05) when calculated from the Se concentrations in plasma, liver, heart, breast muscle, pancreas, kidney and GSH-Px activities in pancreas on d 21 and 42, as well as GSH-Px mRNA level in pancreas on d 21. The results from this study indicated that the Se from SY was more available for enhancing the Se concentrations in plasma or tissues and the expression and activity of GSH-Px in pancreas of broilers than the Se from SS.