Room-Temperature Magnetic Phase Transition in an Electrically Tuned van der Waals Ferromagnet.

Finding tunable van der Waals (vdW) ferromagnets that operate at above room temperature is an important research focus in physics and materials science. Most vdW magnets are only intrinsically magnetic far below room temperature and magnetism with square-shaped hysteresis at room temperature has yet to be observed. Here, we report magnetism in a quasi-2D magnet Cr_{1.2}Te_{2} observed at room temperature (290 K). This magnetism was tuned via a protonic gate with an electron doping concentration up to 3.8×10^{21} cm^{-3}. We observed nonmonotonic evolutions in both coercivity and anomalous Hall resistivity. Under increased electron doping, the coercivities and anomalous Hall effects (AHEs) vanished, indicating a doping-induced magnetic phase transition. This occurred up to room temperature. DFT calculations showed the formation of an antiferromagnetic (AFM) phase caused by the intercalation of protons which induced significant electron doping in the Cr_{1.2}Te_{2}. The tunability of the magnetic properties and phase in room temperature magnetic vdW Cr_{1.2}Te_{2} is a significant step towards practical spintronic devices.

Multifunctional composite coatings with hydrophobic, UV-resistant, anti-oxidative, and photothermal performance for healthcare.

Personal protective textiles have attracted extensive interest since Corona Virus Disease 2019 has broken out. Moreover, developing eco-friendly, multifunctional waterproof, and breathable surface is of great importance but still faces enormous challenges. Notably, good hydrophobicity and breathability are necessary for protective textiles, especially protective clothing and face masks for healthcare. Herein, the multifunctional composite coatings with good UV-resistant, anti-oxidative, hydrophobic, breathable, and photothermal performance has been rapidly created to meet protective requirements. First, the gallic acid and chitosan polymer was coated onto the cotton fabric surface. Subsequently, the modified silica sol was anchored on the coated cotton fabric surface. The successful fabrication of composite coatings was verified by RGB values obtained from the smartphone and K/S value. The present work is an advance for realizing textile hydrophobicity by utilizing fluorine-free materials, compared with the surface hydrophobicity fabricated with conventional fluorinated materials. The surface free energy has been reduced from 84.2 to27.6 mJ/m2 so that the modified cotton fabric could repel the ethylene glycol, hydrochloric acid, and sodium hydroxide solutions, respectively. Besides, the composite coatings possesses lower adhesion to deionized water. After 70 cycles of the sandpaper abrasion, the fluorine-free hydrophobic coatings still exhibits good hydrophobicity with WCA of 124.6 ± 0.9°, with overcoming the intrinsic drawback of the poor abrasion resistance of hydrophobic surfaces. Briefly, the present work may provide a universal strategy for rapidly creating advanced protective coatings to meet personal healthcare, and a novel method for detecting RGB values of composite coatings by smartphone.

Electric Control of Exchange Bias Effect in FePS3-Fe5GeTe2 van der Waals Heterostructures.

Manipulating the exchange bias (EB) effect using an electronic gate is a significant goal in spintronics. The emergence of van der Waals (vdW) magnetic heterostructures has provided improved means to study interlayer magnetic coupling, but to date, these heterostructures have not exhibited electrical gate-controlled EB effects. Here, we report electrically controllable EB effects in a vdW heterostructure, FePS3-Fe5GeTe2. By applying a solid protonic gate, the EB effects were repeatably electrically tuned. The EB field reaches up to 23% of the coercivity and the blocking temperature ranges from 30 to 60 K under various gate-voltages. The proton intercalations not only tune the average magnetic exchange coupling but also change the antiferromagnetic configurations in the FePS3 layer. These result in a dramatic modulation of the total interface exchange coupling and the resultant EB effects. The study is a significant step toward vdW heterostructure-based magnetic logic for future low-energy electronics.

Spin-Momentum Locking Induced Anisotropic Magnetoresistance in Monolayer WTe2.

Monolayer WTe2 is predicted to be a quantum spin Hall insulator (QSHI), and its quantized edge transport has recently been demonstrated. However, one of the essential properties of a QSHI, spin-momentum locking of the helical edge states, has yet to be experimentally validated. Here, we measure and observe gate-controlled anisotropic magnetoresistance (AMR) in monolayer WTe2 devices. Electrically tuning the Fermi energy into the band gap, a large in-plane AMR is observed and the minimum of the in-plane AMR occurs when the applied magnetic field is perpendicular to the current direction. In line with the experimental observations, the theoretical predictions based on the band structure of monolayer WTe2 demonstrate that the AMR effect originates from spin-momentum locking in the helical edge states of monolayer WTe2. Our findings reveal that the spin quantization axis of the helical edge states in monolayer WTe2 can be precisely determined from AMR measurements.

Gate-Controlled Magnetic Phase Transition in a van der Waals Magnet Fe5GeTe2.

Magnetic van der Waals (vdW) materials are poised to enable all-electrical control of magnetism in the two-dimensional limit. However, tuning the magnetic ground state in vdW itinerant ferromagnets by voltage-induced charge doping remains a significant challenge, due to the extremely large carrier densities in these materials. Here, by cleaving the vdW itinerant ferromagnet Fe5GeTe2 (F5GT) into 5.4 nm (around two unit cells), we find that the ferromagnetism (FM) in F5GT can be substantially tuned by the thickness. Moreover, by utilizing a solid protonic gate, an electron doping concentration of above 1021 cm-3 has been exhibited in F5GT nanosheets. Such a high carrier accumulation exceeds that possible in widely used electric double-layer transistors (EDLTs) and surpasses the intrinsic carrier density of F5GT. Importantly, it is accompanied by a magnetic phase transition from FM to antiferromagnetism (AFM). The realization of an antiferromagnetic phase in nanosheet F5GT suggests the promise of applications in high-temperature antiferromagnetic vdW devices and heterostructures.

Gate-Tuned Interlayer Coupling in van der Waals Ferromagnet Fe_{3}GeTe_{2} Nanoflakes.

The weak interlayer coupling in van der Waals (vdW) magnets has confined their application to two dimensional (2D) spintronic devices. Here, we demonstrate that the interlayer coupling in a vdW magnet Fe_{3}GeTe_{2} (FGT) can be largely modulated by a protonic gate. With the increase of the protons intercalated among vdW layers, interlayer magnetic coupling increases. Because of the existence of antiferromagnetic layers in FGT nanoflakes, the increasing interlayer magnetic coupling induces exchange bias in protonated FGT nanoflakes. Most strikingly, a rarely seen zero-field cooled (ZFC) exchange bias with very large values (maximally up to 1.2 kOe) has been observed when higher positive voltages (V_{g}≥4.36 V) are applied to the protonic gate, which clearly demonstrates that a strong interlayer coupling is realized by proton intercalation. Such strong interlayer coupling will enable a wider range of applications for vdW magnets.

Wafer-Sized Ultrathin Gallium and Indium Nitride Nanosheets through the Ammonolysis of Liquid Metal Derived Oxides.

We report the synthesis of centimeter sized ultrathin GaN and InN. The synthesis relies on the ammonolysis of liquid metal derived two-dimensional (2D) oxide sheets that were squeeze-transferred onto desired substrates. Wurtzite GaN nanosheets featured typical thicknesses of 1.3 nm, an optical bandgap of 3.5 eV and a carrier mobility of 21.5 cm2 V-1 s-1, while the InN featured a thickness of 2.0 nm. The deposited nanosheets were highly crystalline, grew along the (001) direction and featured a thickness of only three unit cells. The method provides a scalable approach for the integration of 2D morphologies of industrially important semiconductors into emerging electronics and optical devices.

Extremely Large Magnetoresistance in a Topological Semimetal Candidate Pyrite PtBi_{2}.

While pyrite-type PtBi_{2} with a face-centered cubic structure has been predicted to be a three-dimensional (3D) Dirac semimetal, experimental study of its physical properties remains absent. Here we report the angular-dependent magnetoresistance measurements of a PtBi_{2} single crystal under high magnetic fields. We observed extremely large unsaturated magnetoresistance (XMR) up to (11.2×10^{6})% at T=1.8 K in a magnetic field of 33 T, which is comparable to the previously reported Dirac materials, such as WTe_{2}, LaSb, and NbP. The crystals exhibit an ultrahigh mobility and significant Shubnikov-de Hass quantum oscillations with a nontrivial Berry phase. The analysis of Hall resistivity indicates that the XMR can be ascribed to the nearly compensated electron and hole. Our experimental results associated with the ab initio calculations suggest that pyrite PtBi_{2} is a topological semimetal candidate that might provide a platform for exploring topological materials with XMR in noble metal alloys.

Photothermal, superhydrophobic, conductive, and anti-UV cotton fabric loaded with polydimethylsiloxane-encapsulated copper sulfide nanoflowers.

Multifunctional textiles have attracted widespread attention with the improvement of awareness of health. Especially, the fluorine-free superhydrophobic and conductive cellulose fiber-based fabrics have received intensive interest due to their broad and high-value applications. Herein, the copper sulfide nanoflowers were in-situ deposited on cotton fabric followed by polydimethylsiloxane (PDMS) treatment for encapsulating CuS nanoflowers and obtaining superhydrophobicity, recorded as Cot@PTA@CuS@PDMS. Cot@PTA@CuS@PDMS possesses superhydrophobicity with contact angles of 153.0 ± 0.4°, photothermal effect, excellent UV resistance, good conductivity, and anti-fouling. Interestingly, the resistance of Cot@PTA@CuS@PDMS is significantly reduced from 856.4 to 393.1 Ω under simulated sunlight irradiation with 250 mW/cm2. Notably, the resistance can be slightly recovered after shutting off simulated sunlight. Besides, Cot@PTA@CuS@PDMS has efficient oil-water separation efficiency for corn germ oil and castor oil, respectively. Briefly, this work provides a novel, facile, and promising strategy to fabricate multifunctional fiber-based textiles with the reversible change of resistance under simulated sunlight irradiation, inspiring more scholars to control the resistance change of textiles by light irradiation.

Deep self-supervised transformation learning for leukocyte classification.

The scarcity of training annotation is one of the major challenges for the application of deep learning technology in medical image analysis. Recently, self-supervised learning provides a powerful solution to alleviate this challenge by extracting useful features from a large number of unlabeled training data. In this article, we propose a simple and effective self-supervised learning method for leukocyte classification by identifying the different transformations of leukocyte images, without requiring a large batch of negative sampling or specialized architectures. Specifically, a convolutional neural network backbone takes different transformations of leukocyte image as input for feature extraction. Then, a pretext task of self-supervised transformation recognition on the extracted feature is conducted by a classifier, which helps the backbone learn useful representations that generalize well across different leukocyte types and datasets. In the experiment, we systematically study the effect of different transformation compositions on useful leukocyte feature extraction. Compared with five typical baselines of self-supervised image classification, experimental results demonstrate that our method performs better in different evaluation protocols including linear evaluation, domain transfer, and finetuning, which proves the effectiveness of the proposed method.

Evidences of Topological Surface States in the Nodal-Line Semimetal SnTaS2 Nanoflakes.

Exploring the topological surface state of a topological semimetal by the transport technique has always been a big challenge because of the overwhelming contribution of the bulk state. In this work, we perform systematic angular-dependent magnetotransport measurements and electronic band calculations on SnTaS2 crystals, a layered topological nodal-line semimetal. Distinct Shubnikov-de Haas quantum oscillations were observed only in SnTaS2 nanoflakes when the thickness was below about 110 nm, and the oscillation amplitudes increased significantly with decreasing thickness. By analysis of the oscillation spectra, together with the theoretical calculation, a two-dimensional and topological nontrivial nature of the surface band is unambiguously identified, providing direct transport evidence of drumhead surface state for SnTaS2. Our comprehensive understanding of the Fermi surface topology of the centrosymmetric superconductor SnTaS2 is crucial for further research on the interplay of superconductivity and nontrivial topology.

Electrically controlled superconductor-to-failed insulator transition and giant anomalous Hall effect in kagome metal CsV3Sb5 nanoflakes.

The electronic correlations (e.g. unconventional superconductivity (SC), chiral charge order and nematic order) and giant anomalous Hall effect (AHE) in topological kagome metals AV3Sb5 (A = K, Rb, and Cs) have attracted great interest. Electrical control of those correlated electronic states and AHE allows us to resolve their own nature and origin and to discover new quantum phenomena. Here, we show that electrically controlled proton intercalation has significant impacts on striking quantum phenomena in CsV3Sb5 nanodevices mainly through inducing disorders in thinner nanoflakes and carrier density modulation in thicker ones. Specifically, in disordered thin nanoflakes (below 25 nm), we achieve a quantum phase transition from a superconductor to a "failed insulator" with a large saturated sheet resistance for T → 0 K. Meanwhile, the carrier density modulation in thicker nanoflakes shifts the Fermi level across the charge density wave (CDW) gap and gives rise to an extrinsic-intrinsic transition of AHE. With the first-principles calculations, the extrinsic skew scattering of holes in the nearly flat bands with finite Berry curvature by multiple impurities would account for the giant AHE. Our work uncovers a distinct disorder-driven bosonic superconductor-insulator transition (SIT), outlines a global picture of the giant AHE and reveals its correlation with the unconventional CDW in the AV3Sb5 family.

Fiber-based photothermal, UV-resistant, and self-cleaning coatings fabricated by silicon grafted copolymers of chitosan derivatives and gallic acid.

Superhydrophobic and hydrophobic properties are generally created by adopting low surface free energy materials. Therefore, most studies have focused on creating surface hydrophobicity by using hydrophobic or fluorinated materials. However, few studies are reported on realizing surface hydrophobicity by directly introducing hydrophilic molecules, which is also a challenge. Herein, with platinum nanozyme as the catalyst, the novel hydrophobic coatings have been rapidly gained via anchoring the polymer of hydrophilic gallic acid and chitosan or chitosan quaternary ammonium salt onto cotton fabric surface. Notably, the novel hydrophobic coatings exhibit significant advances compared with conventional hydrophobic ones created by utilizing fluorinated or hydrophobic materials, which breaks the limitation of employing low surface energy materials for gaining surface hydrophobicity. Subsequently, the sodium methyl silicate was grafted on the polymer's coatings to strengthen surface hydrophobicity and the abrasion resistance of hydrophobicity. Interestingly, the heating could induce the hydrophilicity of cotton fabric to recover to hydrophobicity. Moreover, the hydrophobic coatings also possess good photothermal conversion, UV resistance, and anti-oxidation activity for self-cleaning application and oil water separation. Briefly, the present work may open a new direction for preparing novel hydrophobic coatings by combining gallic acid and chitosan-based macromolecular carbohydrates.

Photoenzymatic Activity of Artificial-Natural Bienzyme Applied in Biodegradation of Methylene Blue and Accelerating Polymerization of Dopamine.

Enzymes as biocatalysts have attracted extensive attention. In addition to immobilizing or encapsulating various enzymes for combating the easy loss of enzymatic activity, strengthening the enzymatic activity upon light irradiation is a challenge. To the best of our knowledge, the work of spatiotemporally modulating the catalytic activity of artificial-natural bienzymes with a near-infrared light irradiation has not been reported. Inspired by immobilized enzymes and nanozymes, herein a platinum nanozyme was synthesized; subsequently, the platinum nanozyme was grafted on the body of laccase, thus successfully obtaining the artificial-natural bienzyme. The three-dimensional structure of the artificial-natural bienzyme was greatly different from that of the immobilized enzyme or the encapsulated enzyme. The platinum nanozyme possessed excellent laccase-like activity, which was 3.7 times higher than that of laccase. Meanwhile, the coordination between the platinum nanozyme and laccase was proved. Besides, the cascaded catalysis of artificial-natural bienzyme was verified with hydrogen peroxide as a mediator. The enzymatic activities of artificial-natural bienzyme with and without near-infrared light irradiation were, respectively, 46.2 and 29.5% higher than that of free laccase. Moreover, the reversible catalytic activity of the coupled enzyme could be manipulated with and without a near-infrared light at 808 nm. As a result, the degradation rates of methylene blue catalyzed by the coupled enzyme and the platinum nanozyme were higher than that of laccase. Furthermore, accelerating polymerization of the dopamine was also demonstrated. Briefly, this facile strategy may provide a universal approach to control the catalytic activity of other natural enzymes.

Tailoring Dzyaloshinskii-Moriya interaction in a transition metal dichalcogenide by dual-intercalation.

Dzyaloshinskii-Moriya interaction (DMI) is vital to form various chiral spin textures, novel behaviors of magnons and permits their potential applications in energy-efficient spintronic devices. Here, we realize a sizable bulk DMI in a transition metal dichalcogenide (TMD) 2H-TaS2 by intercalating Fe atoms, which form the chiral supercells with broken spatial inversion symmetry and also act as the source of magnetic orderings. Using a newly developed protonic gate technology, gate-controlled protons intercalation could further change the carrier density and intensely tune DMI via the Ruderman-Kittel-Kasuya-Yosida mechanism. The resultant giant topological Hall resistivity [Formula: see text] of [Formula: see text] at [Formula: see text] (about [Formula: see text] larger than the zero-bias value) is larger than most known chiral magnets. Theoretical analysis indicates that such a large topological Hall effect originates from the two-dimensional Bloch-type chiral spin textures stabilized by DMI, while the large anomalous Hall effect comes from the gapped Dirac nodal lines by spin-orbit interaction. Dual-intercalation in 2H-TaS2 provides a model system to reveal the nature of DMI in the large family of TMDs and a promising way of gate tuning of DMI, which further enables an electrical control of the chiral spin textures and related electromagnetic phenomena.

Liquid metal-based synthesis of high performance monolayer SnS piezoelectric nanogenerators.

The predicted strong piezoelectricity for monolayers of group IV monochalcogenides, together with their inherent flexibility, makes them likely candidates for developing flexible nanogenerators. Within this group, SnS is a potential choice for such nanogenerators due to its favourable semiconducting properties. To date, access to large-area and highly crystalline monolayer SnS has been challenging due to the presence of strong inter-layer interactions by the lone-pair electrons of S. Here we report single crystal across-the-plane and large-area monolayer SnS synthesis using a liquid metal-based technique. The characterisations confirm the formation of atomically thin SnS with a remarkable carrier mobility of ~35 cm2 V-1 s-1 and piezoelectric coefficient of ~26 pm V-1. Piezoelectric nanogenerators fabricated using the SnS monolayers demonstrate a peak output voltage of ~150 mV at 0.7% strain. The stable and flexible monolayer SnS can be implemented into a variety of systems for efficient energy harvesting.

Imaging Domain Reversal in an Ultrathin Van der Waals Ferromagnet.

The recent isolation of 2D van der Waals magnetic materials has uncovered rich physics that often differs from the magnetic behavior of their bulk counterparts. However, the microscopic details of fundamental processes such as the initial magnetization or domain reversal, which govern the magnetic hysteresis, remain largely unknown in the ultrathin limit. Here a widefield nitrogen-vacancy (NV) microscope is employed to directly image these processes in few-layer flakes of the magnetic semiconductor vanadium triiodide (VI3 ). Complete and abrupt switching of most flakes is observed at fields Hc  ≈ 0.5-1 T (at 5 K) independent of thickness. The coercive field decreases as the temperature approaches the Curie temperature (Tc  ≈ 50 K); however, the switching remains abrupt. The initial magnetization process is then imaged, which reveals thickness-dependent domain wall depinning fields well below Hc . These results point to ultrathin VI3 being a nucleation-type hard ferromagnet, where the coercive field is set by the anisotropy-limited domain wall nucleation field. This work illustrates the power of widefield NV microscopy to investigate magnetization processes in van der Waals ferromagnets, which can be used to elucidate the origin of the hard ferromagnetic properties of other materials and explore field- and current-driven domain wall dynamics.

De Haas-van Alphen study on three-dimensional topological semimetal pyrite PtBi2.

We present the systematic de Haas-van Alphen (dHvA) quantum oscillations studies on the recently discovered topological Dirac semimetal pyrite PtBi2 single crystals. Remarkable dHvA oscillations are emerged at a low field about 1.5 T. From the analyses of the dHvA oscillations, we extract the high quantum mobilities, light effective masses and phase shift factors for the Dirac fermions in pyrite PtBi2. From the angular dependence of the dHvA oscillations, we map out the topology of the Fermi surface. Furthermore, we identify two additional oscillation frequencies that are not probed by the SdH oscillations, which provides us with opportunities to further understand its Fermi surface topology.

Antisymmetric magnetoresistance in van der Waals Fe3GeTe2/graphite/Fe3GeTe2 trilayer heterostructures.

With no requirements for lattice matching, van der Waals (vdW) ferromagnetic materials are rapidly establishing themselves as effective building blocks for next-generation spintronic devices. We report a hitherto rarely seen antisymmetric magnetoresistance (MR) effect in vdW heterostructured Fe3GeTe2 (FGT)/graphite/FGT devices. Unlike conventional giant MR (GMR), which is characterized by two resistance states, the MR in these vdW heterostructures features distinct high-, intermediate-, and low-resistance states. This unique characteristic is suggestive of underlying physical mechanisms that differ from those observed before. After theoretical calculations, the three-resistance behavior was attributed to a spin momentum locking induced spin-polarized current at the graphite/FGT interface. Our work reveals that ferromagnetic heterostructures assembled from vdW materials can exhibit substantially different properties to those exhibited by similar heterostructures grown in vacuum. Hence, it highlights the potential for new physics and new spintronic applications to be discovered using vdW heterostructures.

Weak localization effect in topological insulator micro flakes grown on insulating ferrimagnet BaFe12O19.

Many exotic physics anticipated in topological insulators require a gap to be opened for their topological surface states by breaking time reversal symmetry. The gap opening has been achieved by doping magnetic impurities, which however inevitably create extra carriers and disorder that undermine the electronic transport. In contrast, the proximity to a ferromagnetic/ferrimagnetic insulator may improve the device quality, thus promises a better way to open the gap while minimizing the side-effects. Here, we grow thin single-crystal Sb1.9Bi0.1Te3 micro flakes on insulating ferrimagnet BaFe12O19 by using the van der Waals epitaxy technique. The micro flakes show a negative magnetoresistance in weak perpendicular fields below 50 K, which can be quenched by increasing temperature. The signature implies the weak localization effect as its origin, which is absent in intrinsic topological insulators, unless a surface state gap is opened. The surface state gap is estimated to be 10 meV by using the theory of the gap-induced weak localization effect. These results indicate that the magnetic proximity effect may open the gap for the topological surface attached to BaM insulating ferrimagnet. This heterostructure may pave the way for the realization of new physical effects as well as the potential applications of spintronics devices.