Online Compositional Analysis of Complex Oligomers in Biomass Degradation by High-Pressure Flow-Through Reactor Coupled with High-Resolution Mass Spectrometry.

Online analysis of the composition and evolution of complex oligomeric intermediates in biomass degradation is highly desirable to elucidate the mechanism of bond cleavage and study the effect of conditions on the selective conversion of feedstocks. However, harsh reaction conditions and complicated conversion systems pose tremendous challenges for conventional, state-of-the-art analytical techniques. Herein, we introduce a continuous and rapid compositional analysis strategy coupling a high-pressure flow-through reactor with online high-resolution mass spectrometry, which enables the molecular-level characterization of most biomass-related products throughout the conversion for over 2 h. Catalytic depolymerization of one model compound was studied, and temperature-dependent data of over 50 intermediates as well as recondensation dimers and oligomers were obtained, which have rarely been reported in the literature. Thousands of products during the flow-through conversion of birch wood with molecular weights up to 1000 Da were presented, and 8 typical lignin dimers and oligomers with various interunit linkages were identified at the molecular level, demonstrating the potential to analyze more complicated systems far beyond conventional methods, especially for complex oligomers. The continuous evolutions of different components and typical products were unveiled for the first time, providing valuable insights into the investigation of the structure, composition, and decomposition mechanism of lignocellulose as well as the influence of reaction conditions. This method leads to the previously unattained ability to probe and reveal complicated chemical compositions in high-pressure reactions and can be applied to all other high-pressure heterogeneous aqueous reactions.

A Mechanistic Study of HZSM-5-Catalyzed Guaiacol Amination Using Photoionization Time-of-Flight Mass Spectrometry.

Thermal-catalytic conversion and amination (TCC-A) of lignin and lignin derivates over zeolites is a promising and renewable method to produce aromatic amines, but suffers from product diversity. Currently, no unambiguous mechanism could fully describe the chemistry of this process. In this work, the TCC-A mechanism of guaiacol, a typical lignin model compound, with ammonia over HZSM-5 was investigated by online photoionization time-of-flight mass spectrometry combined with density functional theory. Various products including amines, pyrroles, and pyridines were identified. The formation of methylamine and aminophenol below 400 °C via nucleophilic substitutions is attributed to the strong adsorption of ammonia on the active site of HZSM-5. Aniline is the major product above 400 °C coproduced with pyrroles and pyridines. It is suggested that the reactions among radical intermediates (•CH3 and •NH2) and molecules (guaiacol and catechol) lead to poor aniline selectivity via transmethylation, amination, and partial deoxygenation reactions. Hydroamination is proposed as the main formation mechanism of pyrroles and pyridines. The maximum yield of aniline can be achieved at 650 °C owing to the enhancement of amination and deoxygenation and the suppression of transmethylation reactions.

AP-HTPB propellant combustion under strain conditions with laser absorption spectroscopy.

Understanding the combustion behaviors of solid propellant with different levels of strains is of practical interest. In this work, an experimental study of the effects of static and dynamic strains on the burning rate, temperature, CO, and C O 2 formation of aluminized ammonium perchlorate (AP)-hydroxyl terminated poly-butadiene (HTPB) propellant combustion was presented at initial pressures of 0.1 MPa, 0.2 MPa, and 0.5 MPa. The strains were being applied onto solid propellant by exerting static and cyclic loadings. The propellant burning rate was acquired by a 4 kHz high-speed photography system, and the combustion temperature, CO, and C O 2 column densities were measured at 10 kHz through laser absorption spectroscopy (LAS). At atmospheric pressure, it was demonstrated that the propellant burning rate increased with tensile stress and decreased with compressive stress. The measured flame temperature showed a similar correlation with strains as compared to the propellant burning rate. At elevated pressures, the increase of the propellant burning rate due to tensile stress was more evident, while the difference in combustion temperatures was less significant. For the cyclic strain condition, the variations of the measured C O 2 and CO column densities were consistent with the static strain condition.

Probing combustion and catalysis intermediates by synchrotron vacuum ultraviolet photoionization molecular-beam mass spectrometry: recent progress and future opportunities.

Soft photoionization molecular-beam mass spectrometry (PI-MBMS) using synchrotron vacuum ultraviolet (SVUV) light has been significantly developed and applied in various fields in recent decades. Particularly, the tunability of SVUV light enables two-dimensional measurements, i.e. mass spectrum and photoionization efficiency spectrum measurements, affording isomer distinguishment in complex reaction processes. Many key intermediates have been successfully detected in combustion and catalysis reactions with the help of the state-of-the-art SVUV-PI-MBMS, promoting the understanding of the chemical mechanisms. Herein, we present a brief review of the instrumentation of beamline and PI-MBMS machines at the current synchrotron user facility Hefei Light Source II and exemplify the advantages of the SVUV-PI-MBMS method with recent applications in combustion and catalysis research, especially in probing key reaction intermediates. Future opportunities with the next generation synchrotron light source and bench-top light source have also been discussed.

In Situ Reactor-Integrated Electrospray Ionization Mass Spectrometry for Heterogeneous Catalytic Reactions and Its Application in the Process Analysis of High-Pressure Liquid-Phase Lignin Depolymerization.

Process analysis of heterogeneous catalytic reactions such as lignin depolymerization is essential to understand the reaction mechanism at the molecular level, but it is always challenging due to harsh conditions. Herein, we report an operando process analysis strategy by combining a microbatch reactor with high-resolution mass spectrometry (MS) via a reactor-integrated electrospray ionization (R-ESI) technique. R-ESI-MS expands the applications of traditional in situ MS to a heterogeneous and high-pressure liquid-phase system. With this strategy, we present the evolution of a series of monomers, dimers, and oligomers during lignin depolymerization under operando conditions (methanol solvent, 260 °C, ∼8 MPa), which is the first experimental elucidation of a progressive depolymerization pathway and evidence of repolymerization of active monomers. The proposed R-ESI-MS is crucial in probing depolymerization intermediates of lignin; it also provides a flexible strategy for process analysis of heterogeneous catalytic reactions under operando conditions.

Insights into the Decomposition and Oxidation Chemistry of p-Xylene in Laminar Premixed Flames.

This work reports an experimental and kinetic modeling investigation on laminar premixed flame of p-xylene at 0.04 atm and equivalence ratios of 0.75, 1.0, and 1.79. Intermediates such as the p-xylyl radical, p-xylylene, and styrene, as well as polycyclic aromatic hydrocarbons (PAHs), were detected by using synchrotron vacuum ultraviolet photoionization mass spectrometry. Based on our previous aromatic kinetic model, a detailed kinetic model of p-xylene combustion was developed, and the model was validated against the present flame structure data. Model analysis work was also performed in order to reveal the important reactions in p-xylene decomposition and oxidation. The H-abstraction reactions leading to the p-xylyl radical are found to control the consumption of p-xylene in all the three flames. In the rich flame, p-xylyl mainly suffers the H-elimination and isomerization reactions, which produce p-xylylene and the o-xylyl radical, respectively. The further decomposition reactions of the o-xylyl radical contribute to the production of styrene, which is another important C8 intermediate observed in the rich flame. In the stoichiometric and lean flames, p-xylyl mainly suffers the oxidation reactions by O, which give p-methylbenzaldehyde as major product. The growth pathways of PAHs in the rich flame were also investigated in this work. Indenyl, indene, naphthalene, and phenanthrene were observed as the abundantly produced bicyclic and tricyclic PAHs due to the existence of direct formation pathways from the decomposition of p-xylyl radical.

Evidence of a Phenolic Pool as a Key Intermediate for Zeolite-Catalyzed Lignin Pyrolysis.

The phenolic pool is considered to be an important intermediate during the catalytic conversion of biomass. However, no direct evidence has been reported on its full picture on a molecular level due to the huge challenges in probing the reactive and lowly volatile phenolic oligomers with state-of-the-art technologies. Herein, we report the online detection and structural identification of a phenolic pool by utilizing in-situ atmospheric-pressure photoionization mass spectrometry, demonstrating that the phenolic pool is formed through repolymerization of monomers with an equidistant group pattern and acts as a key mechanistic step for both valuable aromatic products and undesired coke. The exploration of the real reactive species is also of great importance for the rational design and synthesis of advanced catalysts with high activity.

In Situ Atmospheric Pressure Photoionization Mass Spectrometric Monitoring of Initial Pyrolysis Products of Biomass in Real Time.

Knowledge on the initial and intermediate pyrolysis products of biomass is essential for the mechanistic investigation of biomass pyrolysis and further optimization of upgrading processes. The conventional method can only detect the final products, which do not resemble the initial or intermediate pyrolysis products. Here, we introduce a direct orifice sampling combined with atmospheric pressure photoionization mass spectrometry (APPI-MS) for in situ online analysis of the evolved volatile initial products from the pyrolysis of biomass. Pyrolysis experiments of both dimeric model compound (guaiacylglycerol-ß-guaiacyl ether, GGGE) and poplar wood were carried out to validate the generality of the method. Generally, secondary reactions can be reduced by shortening the distance between the sample and sampling orifice. Large molecular-weight initial products up to trimers were detected during the pyrolysis of poplar wood, and no initial products larger than trimers were detected. It is inferred that in situ APPI immediately after sample extraction ensures efficient and effective product detection. Furthermore, the present work offers a promising feasible method for online tracing of reaction intermediates not only in pyrolysis but also in various reactive processes (e.g., catalytic reaction, oxidation) under operando conditions.

Formation and Fate of Formaldehyde in Methanol-to-Hydrocarbon Reaction: In Situ Synchrotron Radiation Photoionization Mass Spectrometry Study.

HCHO has been confirmed as an active intermediate in the methanol-to-hydrocarbon (MTH) reaction, and is critical for interpreting the mechanisms of coke formation. Here, HCHO was detected and quantified during the MTH process over HSAPO-34 and HZSM-5 by in situ synchrotron radiation photoionization mass spectrometry. Compared with conventional methods, excellent time-resolved profiles were obtained to study the formation and fate of HCHO, and other products during the induction, steady-state reaction, and deactivation periods. Similar formation trends of HCHO and methane, and their close correlation in yields suggest that they are derived from disproportionation of methanol at acidic sites. In the presence of Y2 O3 , the amount of HCHO changes, affecting the hydrogen-transfer processes of olefins into aromatics and aromatics into cokes. The yield of HCHO affects the aromatic-based cycle and the formation of ethylene, indicating that ethylene is mainly formed from the aromatic-based cycle.

The vacuum ultraviolet beamline/endstations at NSRL dedicated to combustion research.

An undulator-based vacuum ultraviolet (VUV) beamline (BL03U), intended for combustion chemistry studies, has been constructed at the National Synchrotron Radiation Laboratory (NSRL) in Hefei, China. The beamline is connected to the newly upgraded Hefei Light Source (HLS II), and could deliver photons in the 5-21 eV range, with a photon flux of 10(13) photons s(-1) at 10 eV when the beam current is 300 mA. The monochromator of the beamline is equipped with two gratings (200 lines mm(-1) and 400 lines mm(-1)) and its resolving power is 3900 at 7.3 eV for the 200 lines mm(-1) grating and 4200 at 14.6 eV for the 400 lines mm(-1) grating. The beamline serves three endstations which are designed for respective studies of premixed flame, fuel pyrolysis in flow reactor, and oxidation in jet-stirred reactor. Each endstation contains a reactor chamber, an ionization chamber where the molecular beam intersects with the VUV light, and a home-made reflectron time-of-flight mass spectrometer. The performance of the beamline and endstations with some preliminary results is presented here. The ability to detect reactive intermediates (e.g. H, O, OH and hydroperoxides) is advantageous in combustion chemistry research.

On-line product analysis of pine wood pyrolysis using synchrotron vacuum ultraviolet photoionization mass spectrometry.

The pyrolysis process of pine wood, a promising biofuel feedstock, has been studied with tunable synchrotron vacuum ultraviolet photoionization mass spectrometry. The mass spectra at different photon energies and temperatures as well as time-dependent profiles of several selected species during pine wood pyrolysis process were measured. Based on the relative contents of three lignin subunits, the data indicate that pine wood is typical of softwood. As pyrolysis temperature increased from 300 to 700 °C, some more details of pyrolysis chemistry were observed, including the decrease of oxygen content in high molecular weight species, the observation of high molecular weight products from cellulose chain and lignin polymer, and potential pyrolysis mechanisms for some key species. The formation of polycyclic aromatic hydrocarbons (PAHs) was also observed, as well as three series of pyrolysis products derived from PAHs with mass difference of 14 amu. The time-dependent profiles show that the earliest products are formed from lignin, followed by hemicellulose products, and then species from cellulose.

Synchrotron vacuum ultraviolet (VUV) photo-induced fragmentation of cyclic dipeptides radical cations.

Cyclic dipeptides, due to their chemical properties and various bioactivities, are very attractive for medicinal chemistry. Fragmentations of three simple cyclic dipeptides including cyclo(Gly-Gly), cyclo(Ala-Ala) and cyclo(Gly-Val) in the gas-phase are determined with synchrotron vacuum ultraviolet (VUV) photoionization mass spectrometry (VUV PIMS) and theoretical calculations. Cyclo(Gly-Gly) and cyclo(Ala-Ala) show the similar fragmentation pathways. The primary decomposition reactions of cyclo(Gly-Gly) and cyclo(Ala-Ala) radical cations are found to be HNCO loss and CO elimination. The appearance energies (AEs) of fragment ions [CH2NHCOCH2]+• and [CH3CHNHCOCHCH3]+• are measured to be 10.21 and 9.66±0.05 eV, respectively, which are formed from cyclo(Gly-Gly) and cyclo(Ala-Ala) radical cations with HNCO elimination. Due to the stabilization of the radical cation of cyclo(Gly-Val) with isopropyl side group, the dominant fragment ion m/z 114 assigned as [C4H6N2O2]+• is produced by γ-H migration and i cleavage to lose propylene. The ionization energies (IEs) of three cyclic dipeptides decrease in the order cyclo(Gly-Gly) (9.33±0.05 eV)>cyclo(Ala-Ala) (9.21±0.05 eV)>cyclo(Gly-Val) (9.09±0.05 eV) from measurements of photoionization efficiency spectra. It implies that IEs of cyclic dipeptides are affected by substituent groups and symmetrical characterization of molecular structures. These observations of the chemical properties of cyclic dipeptides radical ion (M+•) may be important for understanding gas-phase molecular reactivity of 2,5-diketopiperazines and guiding diketopiperazine-based drug design.

Role of formaldehyde in promoting aromatic selectivity during methanol conversion over gallium-modified zeolites.

Gallium-modified HZSM-5 zeolites are known to increase aromatic selectivity in methanol conversion. However, there are still disputes about the exact active sites and the aromatic formation mechanisms over Ga-modified zeolites. In this work, in situ synchrotron radiation photoionization mass spectrometry (SR-PIMS) experiments were carried out to study the behaviors of intermediates and products during methanol conversion over Ga-modified HZSM-5. The increased formaldehyde (HCHO) yield over Ga-modified HZSM-5 was found to play a key role in the increase in aromatic yields. More HCHO was deemed to be generated from the direct dehydrogenation of methanol, and Ga2O3 in Ga-modified HZSM-5 was found to be the active phase. The larger increase in aromatic production over Ga-modified HZSM-5 after reduction‒oxidation treatment was found to be the result of redispersed Ga2O3 with smaller size generating a larger amount of HCHO. This study provides some new insights into the internal driving force for promoting the production of aromatics over Ga-modified HZSM-5.

Detailed product analysis during the low temperature oxidation of n-butane.

The products obtained from the low-temperature oxidation of n-butane in a jet-stirred reactor (JSR) have been analysed using two methods: gas chromatography analysis of the outlet gas and reflectron time-of-flight mass spectrometry. The mass spectrometer was combined with tunable synchrotron vacuum ultraviolet photoionization and coupled with a JSR via a molecular-beam sampling system. Experiments were performed under quasi-atmospheric pressure, for temperatures between 550 and 800 K, at a mean residence time of 6 s and with a stoichiometric n-butane/oxygen/argon mixture (composition = 4/26/70 in mol%). 36 reaction products have been quantified, including in addition to the usual oxidation products, acetic acid, hydrogen peroxide, C(1), C(2) and C(4) alkylhydroperoxides and C(4) ketohydroperoxides. Evidence of the possible formation of products (dihydrofuranes, furanones) derived from cyclic ethers has also been found. The performance of a detailed kinetic model of the literature has been assessed with the simulation of the formation of this extended range of species. These simulations have also allowed the analysis of possible pathways for the formation of some obtained products.

Pyrolysis of n-heptane: experimental and theoretical study.

An experimental study of n-heptane pyrolysis (2.0% n-heptane in argon) has been performed at low pressure (400 Pa) within the temperature range from 780 to 1780 K. The pyrolysis products were detected by using synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS). Photoionization mass spectra and photoionization efficiency spectra were measured to identify pyrolysis products, especially radicals and isomers. Mole fraction profiles of pyrolysis products versus temperature were also measured, indicating that H(2), CH(4), C(2)H(2), and C2-C6 alkenes are major pyrolysis products of n-heptane. Meanwhile, the thermal decomposition pathways of n-heptane have been investigated using theoretical calculation. The calculation results are in good agreement with the experimental measurement. On the basis of the experimental observation and theoretical calculation, the pyrolysis channels of unimolecular dissociation are proposed to understand the pyrolysis process of n-heptane.

Online investigation on catalytic co-pyrolysis of cellulose and polyethylene over magnesium oxide by advanced mass spectrometry.

Due to rapid deactivation of catalysts, the effective conversion of biomass with oxygen-rich and hydrogen-deficient characteristics to transportation fuels and high-valued chemicals via catalytic pyrolysis remains a challenge for commercialization. Hydrogen-rich plastic is used as feedstock co-fed with biomass to improve the catalytic pyrolysis process. The present work aims to investigate the co-pyrolysis process of cellulose and polyethylene (PE) over MgO by TG combined with photoionization time-of-flight mass spectrometry (PI-TOF-MS), which features on-line detection of catalytic pyrolysis products in real time. The MgO catalyst could improve the pyrolysis of cellulose and enhance the CC bond breaking of PE, respectively. During catalytic co-pyrolysis, the yields from olefins and furan as well as its derivatives can be enhanced obviously. Further, the formation of additional aromatics can be observed due to the Diels-Alder reaction. This work shows TG coupled to PI-TOF-MS is a powerful setup to study and optimize catalytic co-pyrolysis process.

Continuous Butadiyne Addition to Propargyl: A Radical-Efficient Pathway for Polycyclic Aromatic Hydrocarbons.

Polycyclic aromatic hydrocarbons (PAHs) play a crucial role in soot inception, interstellar evolution, and nanomaterial synthesis. Although several mechanisms, such as hydrogen-abstraction acetylene/vinylacetylene addition, have previously been proposed, PAH formation and growth are not yet fully understood. We propose an alternate PAH growth mechanism wherein propargyl radical reacts with butadiyne to form larger radicals containing newly fused aromatic rings. Butadiyne is an important intermediate in hydrocarbon oxidation and carbon rich stars, while propargyl is one of the most important resonantly stabilized radicals that persists for long times. Our proposed mechanism is validated by quantum chemical calculations, elementary reaction experiments, laminar flame analysis, and kinetic modeling. Our findings challenge the conventional wisdom that radical site regeneration, being central to PAH growth, requires sequential hydrogen elimination and/or abstraction. In our proposed mechanism, PAH growth does not depend on abundant free radical consumption, and could, therefore, help explain carbonaceous nanoparticle coalescence in radical-deficient reaction environments.

Determination of absolute photoionization cross-sections of alkanes and cyclo-alkanes.

Absolute photoionization and dissociative photoionization cross-sections of eleven n-alkanes (n-pentane, n-hexane, n-heptane, n-nonane, n-decane, n-undecane, n-dodecane, n-tridecane, n-tetradecane, n-pentadecane and n-hexadecane), three cyclo-alkanes (cyclopentane, methylcyclohexane and trans-decahydronaphthalene) and iso-octane were measured for photon energies from the ionization thresholds to 11.5 eV. The measurements were performed with the binary-liquid-mixture method utilizing the photoionization cross-sections of benzene as a calibration standard. The ionization energies of n-alkanes and cyclo-alkanes were also calculated at the B3P86/6-31 + +G(d,p) level and by the G3B3 method.

Study of the thermal decomposition mechanism of FOX-7 by molecular dynamics simulation and online photoionization mass spectrometry.

The thermal decomposition mechanism of energetic materials is important for analyzing the combustion mechanisms of propellants and evaluating the safety of propellants during transport and storage. 1,1-Diamino-2,2-dinitroethylene (FOX-7) is an important insensitive energetic material that can be used as an oxidizer in propellants. However, the initial decomposition mechanism of FOX-7 is not clear to date. The ReaxFF molecular dynamics method is widely used in the investigation of the thermal decomposition mechanisms of energetic materials. Meanwhile, the combination of thermogravimetry with online photoionization time-of-flight mass spectrometry (TG-PI-TOF-MS) and online single-photon ionization time-of-flight mass spectrometry (SPI-TOF-MS) can reveal the decomposition products, which may be integrated with the results of the simulation. In this study, the primary thermal decomposition mechanism of 1,1-diamino-2,2-dinitroethylene (FOX-7) was studied by the ReaxFF molecular dynamics simulations and online photoionization mass spectrometry. The results of the molecular dynamics simulations showed that the primary decomposition step of FOX-7 is C-NO2 cleavage; after this, C[double bond, length as m-dash]O formation occurs via a three-membered ring transition state, followed by NO elimination. The remaining structure loses NH2 and H, resulting in the formation of the NHC[double bond, length as m-dash]C[double bond, length as m-dash]O structure, which finally breaks down into HNC and CO. NH2 reacts with an H atom to produce NH3. A reversible intramolecular hydrogen transfer was also observed at 2500 K; however, it failed to dominate the decomposition reaction. During the decomposition of FOX-7, the major products are N2, NH3, CO2, and H2N2 and the minor products are H2O, HN2, and H2. The TG-PI-TOF-MS spectrum shows three signals, i.e., m/z = 18, 28, and 30, which can be assigned to H2O, CO, and NO, respectively. Moreover, four signals at m/z = 72.72, 55.81, 45.79, and 29.88 corresponding to the products (NH2)2C[double bond, length as m-dash]C[double bond, length as m-dash]O, (NH2)C[double bond, length as m-dash]C[double bond, length as m-dash]O, NO2, and NO have been obtained in the SPI-TOF-MS spectrum. The experimental data obtained via online photoionization mass spectrometry further validated the results of the molecular dynamics simulations.

Determination of absolute photoionization cross-sections of aromatics and aromatic derivatives.

The absolute photoionization cross-sections of aromatics and aromatic derivatives including toluene, ethylbenzene, n-propylbenzene, o-xylene, m-xylene, p-xylene, 1,3,5-trimethylbenzene, styrene, phenylacetylene, indene, indane, 1-methylnaphthalene, benzyl alcohol and benzaldehyde were measured at the photon energy range from ionization thresholds to 11.7 eV. The experiments were performed by tunable synchrotron vacuum ultraviolet (VUV) photoionization mass spectrometry. Benzene was chosen as a calibration standard, since its photoionization cross-section is well known. Binary liquid mixtures of the investigated molecules and benzene were used in the measurements. Photo-induced fragments from the molecules were also observed, and their photoionization cross-sections are also presented.