GCN5 regulates ZBTB16 through acetylation, mediates osteogenic differentiation, and affects orthodontic tooth movement.

In the process of orthodontic tooth movement (OTM), periodontal ligament fibroblasts (PDLFs) must undergo osteogenic differentiation. OTM increased the expression of Zinc finger and BTB domain-containing 16 (ZBTB16), which is implicated in osteogenic differentiation. Our goal was to investigate the mechanism of PDLF osteogenic differentiation mediated by ZBTB16. The OTM rat model was established, and PDLFs were isolated and exposed to mechanical force. Hematoxylin-eosin staining, Alizarin Red staining, immunofluorescence, and immunohistochemistry were carried out. The alkaline phosphatase (ALP) activity was measured. Dual-luciferase reporter gene assay and chromatin immunoprecipitation assay were conducted. In OTM models, ZBTB16 was significantly expressed. Additionally, there was an uneven distribution of PDLFs in the OTM group, as well as an increase in fibroblasts and inflammatory infiltration. ZBTB16 interference hindered PDLF osteogenic differentiation and decreased Wnt and ß-catenin levels. Meanwhile, ZBTB16 activated the Wnt/ß-catenin pathway. ZBTB16 also enhanced the expression of the osteogenic molecules osterix, osteocalcin (OCN), osteopontin (OPN), and bone sialo protein (BSP) at mRNA and protein levels. The interactions between Wnt1 and ZBTB16, as well as GCN5 and ZBTB16, were also verified. The adeno-associated virus-shZBTB16 injection also proved to inhibit osteogenic differentiation and reduce tooth movement distance in in vivo tests. ZBTB16 was up-regulated in OTM. Through acetylation modification of ZBTB16, GCN5 regulated the Wnt/ß-catenin signaling pathway and further mediated PDLF osteogenic differentiation.

miR-221-3p and miR-222-3p downregulation promoted osteogenic differentiation of bone marrow mesenchyme stem cells through IGF-1/ERK pathway under high glucose condition.

OBJECTIVE: This study aims to investigate the roles of miR-221-3p and miR-222-3p in the regulation of osteogenic differentiation of bone marrow mesenchyme stem cells (BMSCs) under high glucose condition. MATERIALS AND METHODS: The expreesions of miR-221-3p, miR-222-3p and insulin-like growth factor 1 (IGF-1) were detected by qRT-PCR. The protein levels of osteoblast-related proteins (Osterix, Runx-2 and Osteopontin) were detected by western blot. Whether miR-221-3p and miR-222-3p can target IGF-1 was assessed by dual luciferase reporter gene assay. RESULTS: miR-221-3p and miR-222-3p were up-regulated in the mandibles of diabetic rats and BMSCs cultured in high glucose condition. Silencing miR-221-3p or/ and miR-222-3p increased ALP activity and up-regulated osteoblast-related protein levels, and the simultaneous silence the two miRNAs showed stronger effects on ALP activity and osteoblast-related protein levels. Next, we confirmed that miR-221-3p and miR-222-3p both targeted IGF-1 and cooperatively regulated its expression. Besides, miR-221-3p and miR-222-3p regulated ERK activation through IGF-1. Silencing miR-221-3p and miR-222-3p promoted osteogenic differentiation of BMSCs through IGF-1 under high glucose condition. CONCLUSION: miR-221-3p and miR-222-3p inhibited osteogenic differentiation of BMSCs via IGF-1/ERK pathway under high glucose condition.

Improving the Stability of Liposomal Curcumin by Adjusting the Inner Aqueous Chamber pH of Liposomes.

Curcumin (CURC) is a hydrophobic molecule and its water solubility can be greatly improved by liposome encapsulation. However, investigations on the stability of pH-sensitive molecules incorporated into liposomal membranes are limited. In this study, CURC-loaded liposomes with varied internal pH values (pH 2.5, 5.0, or 7.4) were prepared and designated as CURC-LP (pH 2.5), CURC-LP (pH 5.0), and CURC-LP (pH 7.4). Physical properties including particle size, ζ-potential, morphology, entrapment efficiency, and physical stabilities of these CURC-LPs were assessed. In addition, the chemical stability of liposomal CURC to different external physiological environments and internal microenvironmental pH levels were investigated. We found that among these CURC-LPs, CURU-LP (pH 2.5) has the highest entrapment efficiency (73.7%), the best physical stabilities, and the slowest release rate in vitro. Liposomal CURC remains more stable in an acid external environment. In the physiological environment, the chemical stability of liposomal CURC is microenvironmental pH-dependent. In conclusion, we prove that the stability of liposomal CURC is external physiological environment- and internal microenvironmental pH-dependent. These findings suggest that creating an acidic microenvironment in the internal chamber of liposomes is beneficial to the stability of liposomal CURC, as well as for other pH-sensitive molecules.

[Effect of anatomical parameters of maxillary sinus on the outcomes of transcrestal sinus lift].

OBJECTIVE: To investigate the effect of three anatomical parameters (maxillary sinus width, maxillary sinus angle, and residual bone height) on the outcomes of transcrestal sinus lift with simultaneous implant placement. METHODS: A total of 60 maxillary sinuses in 42 patients were included in this study. All patients were treated with transcrestal sinus lift procedure associated with simultaneous implant placement using a composite graft material of autogenous bone and Bio-Oss. For each patient, beam computed tomography (CBCT) scans were performed preoperatively, immediately after surgery, and 6 months after surgery. The parameters were measured on the preoperative and postoperative CBCT images. The correlation of three anatomical parameters with graft resorption was analyzed using Pearson's correlation test. RESULTS: The average residual bone height was (4.46±1.55) mm. The average width of maxillary sinus was (13.86±2.71) mm. The average sinus angle was 78.09°±10.27°. A significant positive correlation was observed between maxillary sinus width and graft resorption (P<0.01). A positive association was also found between sinus angle and graft resorption (P<0.01). CONCLUSIONS: The findings show that graft bone resorption in elevated sinus has a positive correlation with the sinus width and sinus angle.

[Finite element contact stress analysis of simulating teeth with wedge shaped defects in the cervical region].

OBJECTIVE: To study the distribution of stress of simulating teeth with wedge shaped defects in the cervical region. METHODS: The models of anisotropic enamel of the mandibular first premolar and the opposite maxillary first premolar crown were created. A defect was introduced into the model of mandibular premolar in the buccal cervical region along the enamelo-dentinal junction (DEJ). The stress distribution in the cervical region of the mandibular premolar was investigated considering lateral condition simulating working micromotions. In this case, the stroke was applied to the maxillary first mandibular in a stepping procedure using nonlinear contact analysis. RESULTS: The stresses were concentrated in the defect of the enamel and dentin at the DEJ in the condition of lateral loading. As the defect length increased in size, the peak maximum principal stress (MPS) value and the magnitude of the stress field along the DEJ both increased. CONCLUSION: Undermined cervical DEJ had a significant effect on the stress distribution in the buccal cervical region.

[Structural characteristics of laser-welded cast pure titanium joints by different gap distance].

OBJECTIVE: To measure the microstructure of laser-welded cast pure titanium by different gap distance. METHODS: Forty specimens were sectioned and welded at four gaps (0.00 mm, 0.25 mm, 0.50 mm and 1.00 mm). Took microhardness test and metallographic examination of welded zone surface. RESULTS: There were no difference in microhardness value and metallographic observation between welded specimens. The width of heat-effected zone was different. The smaller grains and needle-like alphamartensitic structure were found in the heat-affected zone. CONCLUSION: The effects of the joint gap were not significant.

[Effects of laser welding on bond of porcelain fused cast pure titanium].

OBJECTIVE: To investigate the influence of the laser welding on bond of porcelain fused to cast pure titanium. METHODS: Twenty cast titanium plates were divided into two groups: laser welded group and control group. The low-fusing porcelain was fused to the laser welded cast pure titanium plates at fusion zone. The bond strength of the porcelain to laser welded cast pure titanium was measured by the three-point bending test. The interface of titanium and porcelain was investigated by scanning electron microscopy (SEM) and energy depressive X-ray detector (EDX). The non-welded titanium plates were used as comparison. RESULTS: No significant difference of the bond strength was found between laser-welded samples [(46.85 +/- 0.76) MPa] and the controls [(41.71 +/- 0.55) MPa] (P > 0.05). The SEM displayed the interface presented similar irregularities with a predominance. The titanium diffused to low-fusing porcelain, while silicon and aluminum diffused to titanium basement. CONCLUSIONS: Laser welding does not affect low-fusing porcelain fused to pure titanium.