Chemigenetic indicators based on synthetic chelators and green fluorescent protein.

Molecular fluorescent indicators are versatile tools for dynamic imaging of biological systems. We now report a class of indicators that are based on the chemigenetic combination of a synthetic ion-recognition motif and a protein-based fluorophore. Specifically, we have developed a calcium ion (Ca2+) indicator that is based on genetic insertion of circularly permuted green fluorescent protein into HaloTag protein self-labeled with a ligand containing the Ca2+ chelator 1,2-bis(2-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid. We have demonstrated the versatility of this design by also developing a sodium ion (Na+) indicator using a crown-ether-containing ligand. This approach affords bright and sensitive ion indicators that can be applicable to cell imaging. This design can enable the development of chemigenetic indicators with ion or molecular specificities that have not been realized with fully protein-based indicators.

Identification of fibrosis in hypertrophic cardiomyopathy: a radiomic study on cardiac magnetic resonance cine imaging.

OBJECTIVES: Hypertrophic cardiomyopathy (HCM) often requires repeated enhanced cardiac magnetic resonance (CMR) imaging to detect fibrosis. We aimed to develop a practical model based on cine imaging to help identify patients with high risk of fibrosis and screen out patients without fibrosis to avoid unnecessary injection of contrast. METHODS: A total of 273 patients with HCM were divided into training and test sets at a ratio of 7:3. Logistic regression analysis was used to find predictive image features to construct CMR model. Radiomic features were derived from the maximal wall thickness (MWT) slice and entire left ventricular (LV) myocardium. Extreme gradient boosting was used to build radiomic models. Integrated models were established by fusing image features and radiomic models. The model performance was validated in the test set and assessed by ROC and calibration curve and decision curve analysis (DCA). RESULTS: We established five prediction models, including CMR, R1 (based on the MWT slice), R2 (based on the entire LV myocardium), and two integrated models (ICMR+R1 and ICMR+R2). In the test set, ICMR+R2 model had an excellent AUC value (0.898), diagnostic accuracy (89.02%), sensitivity (92.54%), and F1 score (93.23%) in identifying patients with positive late gadolinium enhancement. The calibration plots and DCA indicated that ICMR+R2 model was well-calibrated and presented a better net benefit than other models. CONCLUSIONS: A predictive model that fused image and radiomic features from the entire LV myocardium had good diagnostic performance, robustness, and clinical utility. KEY POINTS: • Hypertrophic cardiomyopathy is prone to fibrosis, requiring patients to undergo repeated enhanced cardiac magnetic resonance imaging to detect fibrosis over their lifetime follow-up. • A predictive model based on the entire left ventricular myocardium outperformed a model based on a slice of the maximal wall thickness. • A predictive model that fused image and radiomic features from the entire left ventricular myocardium had excellent diagnostic performance, robustness, and clinical utility.

Photoelectric Conversion System Composed of Gene-Recombined Photosystem I and Platinum Nanoparticle Nanosheet.

Photosynthesis is one of the most vital processes in nature, which consists of two main photoreaction centers called photosystem I and photosystem II. The high quantum yield of photosystem I (PSI) makes it attractive for bioelectronic applications. However, the native PSI (N-PSI) loses its robust photochemical properties once fabricated into devices. This property degradation results from the difficulty in controlling the orientation of PSI. With the optimal orientation of PSI, photoexcited electrons can easily reach the electrode, yielding good photoelectric conversion efficiency. We developed a novel photoelectrode by integrating a newly designed gene-recombined PSI (G-PSI) with platinum nanoparticles (PtNPs) on substrates using a simple stacking method, which can control the orientation of PSI on the electrode. The target orientation of the attached G-PSI toward the substrate was confirmed by the absorption spectra of polarized light. An approximately 2-fold increase in the internal quantum yield (IQY) was observed for the G-PSI-attached electrode under 680 nm irradiation compared with that of the N-PSI-modified electrode. In addition, a 4-fold enhancement of the IQY was detected for cytochrome c (Cyt c) stacking on the G-PSI because of the electrostatic interaction, suggesting that Cyt c successfully secured the electron-transfer pathway.

Transcription Factor CaSBP12 Negatively Regulates Salt Stress Tolerance in Pepper (Capsicum annuum L.).

SBP-box (Squamosa-promoter binding protein) genes are a type of plant-specific transcription factor and play important roles in plant growth, signal transduction, and stress response. However, little is known about the role of pepper SBP-box transcription factor genes in response to abiotic stress. Here, one of the pepper SBP-box gene, CaSBP12, was selected and isolated from pepper genome database in our previous study. The CaSBP12 gene was induced under salt stress. Silencing the CaSBP12 gene enhanced pepper plant tolerance to salt stress. The accumulation of reactive oxygen species (ROS) of the detached leaves of CaSBP12-silenced plants was significantly lower than that of control plants. Besides, the Na+, malondialdehyde content, and conductivity were significantly increased in control plants than that in the CaSBP12-silenced plants. In addition, the CaSBP12 over-expressed Nicotiana benthamiana plants were more susceptible to salt stress with higher damage severity index percentage and accumulation of ROS as compared to the wild-type. These results indicated that CaSBP12 negatively regulates salt stress tolerance in pepper may relate to ROS signaling cascades.

[Implementation of control system and software design for limbs rehabilitation training based on PCI-1240].

This article presents the design of a motion control system for seated lower-limb rehabilitation training. The system is composed of lower limb exoskeleton, motor drive circuit, program of motion control, and so forth. The power of lower limbs joints is provided by six motors. The PCI-1240 motion control card is used as the core. This study achieved repetitive rotation training and gait trajectory training of lower limbs joints, of which the velocity, angle and time can be accurately controlled and adjusted. The experimental results showed that the motion control system can meet the requirement of repetitive rehabilitation training for patients with lower limb dysfunction. This article provides a new method to the research of motion control system in rehabilitation training, which can promote industrial automation technique to be used for health care, and conducive to the further study of the rehabilitation robot.

[The design of weight-loss walking rehabilitation training system of differential-pressure style].

This research is to develop a weight-loss walking rehabilitation training system based on differential air pressure. The system adopted Proportion-Integral-Derivative (PID) algorithm to improve the precision of weight loss, taking MSP430F149 microprocessor of Texas Instruments as the core of pressure control system. The training software is designed based on Microsoft Visual C++ 6.0 of Microsoft. The system can provide comfortable training environment for patients with lower limb motor function impediment, and can collect electromyographic signals from patients, so as to further the scientific and normative management of the patient's information. Based on this training system, the initial bearing weight, bearing weight after maximum weight loss, and maximum weight loss percentage of 10 normal adults' lower limbs were collected. It was found that the intraclass correlation coefficient (ICC) values were all greater than 0.6. The training system has a good reliability, which can provide scientific data for clinical weight-loss lower limb rehabilitation training.

Evaluation of the association of polymorphisms in EYA1, environmental factors, and non-syndromic orofacial clefts in Western Han Chinese.

BACKGROUND: Non-syndromic orofacial clefts (NSOCs) are complex disease involving genetic triggers, environmental factors, and their interplay. Recent studies demonstrated that EYA1, a member of eye absent gene family, might contribute to NSOCs. METHODS: We investigated three single nucleotide polymorphisms (SNPs) and eight environmental factors (multivitamin, folic acid and calcium supplementation history, maternal alcohol consumption, common cold history, maternal smoking and environmental tobacco smoke in the first trimester, and paternal smoking in the 3 months before pregnancy) among 294 case-parent trios and 183 individual controls in western Han Chinese to evaluate the relationship between EYA1, environmental factors, and NSOCs. To be better known the gene's role in the etiology of NSOCs, we performed statistical analysis in different aspects including the linkage disequilibrium test, transmission disequilibrium test, haplotype analysis, multiple logistic regression analysis, and conditional logistic regression analysis. RESULTS: Allele C at rs3779748 showed an over-transmission in NSCL/P trios (P = 0.03), and genotype A/A at rs10094908 was under-transmitted among NSCL/P trios (P = 0.03), whereas over-transmitted among NSCPO trios (P = 0.02). The haplotype GC of rs10094908-rs3779748 was over-transmitted among NSCL/P trios (P = 0.05) and NSCPO trios (P = 0.05), respectively. Maternal common cold history, environmental tobacco smoke, and maternal alcohol consumption during the first trimester of pregnancy were risk factors for NSOCs, while calcium supplementation during the first trimester showed a protective effect. No evidence of interactions between EYA1 and environmental factors was found. CONCLUSIONS: These results revealed an association between EYA1, some environmental factors, and NSOCs in western Han Chinese.

Three-dimensional SVM with latent variable: application for detection of lung lesions in CT images.

The study aims to improve the performance of current computer-aided schemes for the detection of lung lesions, especially the low-contrast in gray density or irregular in shape. The relative position between suspected lesion and whole lung is, for the first time, added as a latent feature to enrich current Three-dimensional (3D) features such as shape, texture. Subsequently, 3D matrix patterns-based Support Vector Machine (SVM) with the latent variable, referred to as L-SVM3Dmatrix, was constructed accordingly. A CT image database containing 750 abnormal cases with 1050 lesions was used to train and evaluate several similar computer-aided detection (CAD) schemes: traditional features-based SVM (SVMfeature), 3D matrix patterns-based SVM (SVM3Dmatrix) and L-SVM3Dmatrix. The classifier performances were evaluated by computing the area under the ROC curve (AUC), using a 5-fold cross-validation. The L-SVM3Dmatrix sensitivity was 93.0 with 1.23% percentage of False Positive (FP), the SVM3Dmatrix sensitivity was 88.4 with 1.49% percentage of FP, and the SVMfeature sensitivity was 87.2 with 1.78% percentage of FP. The L-SVM3Dmatrix outperformed other current lung CAD schemes, especially regarding the difficult lesions.

Dermatoglyphic Features in Nonsyndromic Cleft Lip and/or Palate Patients and Their Parents in China.

OBJECTIVE: To test the hypothesis that indicators and fluctuating asymmetry (FA) on fingers and palms in nonsyndromic cleft lip and/or palate (NSCL/P) and their parents were affected by developmental instability and to investigate a potential way for prenatal diagnosis of NSCL/P. DESIGN: Case-control study. SETTING: West China College of Stomatology and Chengdu Children's Hospital, Chengdu, China. PARTICIPANTS: Three hundred sixty NSCL/P patients and their 720 unaffected parents were collected. Two hundred ninety normal children and their 580 parents were selected as the control. MAIN OUTCOME MEASURES: Total ridge counts, atd angle, fingerprints pattern types, a-b ridge count, and true pattern (TP) on palm were determined. For each indicator, asymmetry between hands was defined. Pattern types and asymmetries were statistically compared among groups. RESULT: Compared with the control, NSCL/P patients had significantly greater a-b ridge count for both hands (P < .001), decreased TP in the left thenar area (TA) as well as in the hypothenar area (HA) and interdigital third area (I3) (all P < .05), and increased FA in HA and I3 (both P < .05), while their parents had greater a-b ridge counts (P < .001). NSCL/P patients possessed more slowly developing patterns and higher levels of FA on their palms, followed by their parents and then the controls. CONCLUSION: A-b ridge count could be a potential prenatal indicator in people without family history that are at increased risk of having a child with NSCL/P. The increased tendency for slower development of patterns and higher levels of FA indirectly support the possibility that the developmental sequence of ridges in NSCL/P is retarded. However, further work is still needed.

Comparison of the Safety and Efficacy of Remimazolam Besylate versus Dexmedetomidine for Patients Undergoing Fiberoptic Bronchoscopy: A Prospective, Randomized Controlled Trial.

Objective: Remimazolam besylate is a novel ultra-short-acting benzodiazepine that is rapidly hydrolyzed to zolpidem propionic acid by tissue lipases. We designed this study to compare the safety and efficacy of remimazolam besylate alfentanil versus dexmedetomidine-alfentanil for fiberoptic bronchoscopy (FB). Methods: One hundred and twenty patients undergoing FB into this prospective randomized controlled trial were divided into two groups. The anesthesia induction consisted of 6 mg/kg/h of remimazolam besylate in the RA group and 0.5 µg/kg of dexmedetomidine in the DA group. 1-2 mg/kg/h of remimazolam besylate or 0.2-0.7 µg/kg/h of dexmedetomidine were administered to maintain during FB. The lowest oxygen saturation, success rate of FB, hemodynamics, time metrics, bronchoscopy feasibility, drug dose requirements, patient and bronchoscopist satisfaction scores, occurrence of intraoperative awareness, number of patients willing to repeat FB with the same sedation regimen, and occurrence and severity of adverse events. Results: The lowest oxygen saturation during the FB was significantly higher in the RA group (P = 0.001). Compared with the variables in the DA group, peripheral oxygen saturation, systolic blood pressure, and diastolic blood pressure were significantly lower at T2 and T3 in the RA group (P < 0.05). Heart rates were significantly higher from T2 to T4 in the DA group (P < 0.05). More patients experienced bradycardia in the DA group (P = 0.041). Compared with time metrics in the DA group, the induction time, fully-alert time, and recovery room-leaving time were all significantly shorter in the RA group (P < 0.05). The bronchoscopy feasibility scores in the RA group were significantly lower at T2, whereas they were lower at T3 in the DA group (P < 0.05). Conclusion: Remimazolam besylate is superior to dexmedetomidine when combined with alfentanil during FB, promoting faster patients' recovery, better operative conditions and respiratory stability with similar rates of occurrence and severity of adverse events.

Improving Wear Resistance and Corrosive Resistance of Cemented Carbide for Mud Pulser Rotor by Deep Cryogenic Treatment.

Cemented carbide used in the rotor of a mud pulser is subjected to the scouring action of solid particles and corrosive mud media for a long time, which causes abrasive wear and electrochemical corrosion. To improve the wear and corrosive resistance of cemented carbide, samples with different cobalt content (WC-5Co, WC-8Co, and WC-10Co) receive deep cryogenic treatment (DCT) at -196 °C for 2.5 h. An optical metalloscope (OM) and X-ray diffractometer (XRD) are used to observe the phase changes of cemented carbides, and the XRD is also used to observe the change in residual stress on the cemented carbide's surface. A scanning electron microscope (SEM) is used to characterize the wear and electrochemical corrosion surface microstructure of cemented carbides (untreated and DCT). The results show that the DCT promotes the precipitation of the η phase, and the diffraction peak of ε-Co tends to intensify. Compared with the untreated, the wear rates of WC-5Co, WC-8Co, and WC-10Co can be reduced by 14.71%, 37.25%, and 41.01% by DCT, respectively. The wear form of the cemented carbides is mainly the extrusion deformation of Co and WC shedding. The precipitation of the η phase and the increase in WC residual compressive stress by DCT are the main reasons for the improvement of wear resistance. The electrochemical corrosion characteristic is the dissolution of the Co phase. DCT causes the corrosion potential of cemented carbide to shift forward and the corrosion current density to decrease. The enhancement of the corrosion resistance of cemented carbide caused by DCT is due to the Co phase transition, η phase precipitation, and the increase in the compressive stress of cemented carbide.

A dual-ring network design for the fast orbit feedback system of the storage ring.

Building reliable fast orbit feedback (FOFB) systems to offer high stability of the beam orbit becomes more challenging for the diffraction-limited storage ring due to the smaller beam size. The beam position measurement and control (BPMC) processor has been developed to streamline the FOFB system architecture by integrating BPM (Beam Position Monitor) electronics and an orbit feedback controller. This paper designs a hierarchical dual-ring network topology based on BPMC processors using parameters derived from the storage ring of the Hefei Advanced Light Facility. To reduce latency and prevent data transmission collisions, we propose a multi-forwarding communication scheme and a communication controller design in a field-programmable gate array. Experimental results verify that this topology operates reliably with the multi-forwarding scheme, providing an approximate communication latency as low as 17.336 µs to support the 30 kHz orbit feedback update rate.

Peptide-AIE Nanofibers Functionalized Sutures with Antimicrobial Activity and Subcutaneous Traceability.

As one of the most widely used medical devices, sutures face challenges related to surgical site infections (SSIs) and lack of subcutaneous traceability. In the present study, a facile and effective approach using peptide-AIE nanofibers (NFs-K18) to create fluorescent-traceable antimicrobial sutures, which have been applied to four commercially available sutures is developed. The functionalized sutures of PGAS-NFs-K18 and PGLAS-NFs-K18 exhibit fluorescence with excellent penetration from 4 mm chicken breasts. They also demonstrate remarkable stability after 24 h of white light illumination and threading through chicken breasts 10 times. These sutures efficiently generate ROS, resulting in significant suppression of four clinical bacteria, with the highest antimicrobial rate of ≈100%. Moreover, the sutures exhibit favorable hemocompatibility and biocompatibility. In vivo experiments demonstrate that the optimized PGLAS-NFs-K18 suture displays potent antimicrobial activity against MRSA, effectively inhibiting inflammation and promoting tissue healing in both skin wound and abdominal wall wound models, outperforming the commercially available Coated VICRYL Plus Antibacterial suture. Importantly, PGLAS-NFs-K18 exhibits sensitive subcutaneous traceability, allowing for accurate in situ monitoring of its degradation. It is believed that this straightforward strategy offers a new pathway for inhibiting SSIs and monitoring the status of sutures.

The complete mitochondrial genomes of two rice planthoppers, Nilaparvata lugens and Laodelphax striatellus: conserved genome rearrangement in Delphacidae and discovery of new characteristics of atp8 and tRNA genes.

BACKGROUND: Nilaparvata lugens (the brown planthopper, BPH) and Laodelphax striatellus (the small brown planthopper, SBPH) are two of the most important pests of rice. Up to now, there was only one mitochondrial genome of rice planthopper has been sequenced and very few dependable information of mitochondria could be used for research on population genetics, phylogeographics and phylogenetic evolution of these pests. To get more valuable information from the mitochondria, we sequenced the complete mitochondrial genomes of BPH and SBPH. These two planthoppers were infected with two different functional Wolbachia (intracellular endosymbiont) strains (wLug and wStri). Since both mitochondria and Wolbachia are transmitted by cytoplasmic inheritance and it was difficult to separate them when purified the Wolbachia particles, concomitantly sequencing the genome of Wolbachia using next generation sequencing method, we also got nearly complete mitochondrial genome sequences of these two rice planthoppers. After gap closing, we present high quality and reliable complete mitochondrial genomes of these two planthoppers. RESULTS: The mitogenomes of N. lugens (BPH) and L. striatellus (SBPH) are 17, 619 bp and 16, 431 bp long with A + T contents of 76.95% and 77.17%, respectively. Both species have typical circular mitochondrial genomes that encode the complete set of 37 genes which are usually found in metazoans. However, the BPH mitogenome also possesses two additional copies of the trnC gene. In both mitochondrial genomes, the lengths of the atp8 gene were conspicuously shorter than that of all other known insect mitochondrial genomes (99 bp for BPH, 102 bp for SBPH). That two rearrangement regions (trnC-trnW and nad6-trnP-trnT) of mitochondrial genomes differing from other known insect were found in these two distantly related planthoppers revealed that the gene order of mitochondria might be conservative in Delphacidae. The large non-coding fragment (the A+T-rich region) putatively corresponding responsible for the control of replication and transcription of mitochondria contained a variable number of tandem repeats (VNTRs) block in different natural individuals of these two planthoppers. Comparison with a previously sequenced individual of SBPH revealed that the mitochondrial genetic variation within a species exists not only in the sequence and secondary structure of genes, but also in the gene order (the different location of trnH gene). CONCLUSION: The mitochondrial genome arrangement pattern found in planthoppers was involved in rearrangements of both tRNA genes and protein-coding genes (PCGs). Different species from different genera of Delphacidae possessing the same mitochondrial gene rearrangement suggests that gene rearrangements of mitochondrial genome probably occurred before the differentiation of this family. After comparatively analyzing the gene order of different species of Hemiptera, we propose that except for some specific taxonomical group (e.g. the whiteflies) the gene order might have diversified in family level of this order. The VNTRs detected in the control region might provide additional genetic markers for studying population genetics, individual difference and phylogeographics of planthoppers.

Associations between EYA1 single-nucleotide polymorphisms and non-syndromic orofacial clefts in Western Han Chinese.

BACKGROUND: Non-syndromic orofacial clefts (NSOC) are the most common craniofacial birth defects and are considered as complex and multifactorial diseases involving the interplay of genetic predisposition and environmental exposures. Recent studies demonstrated that EYA1, a member of eye absent gene family, might contribute to the development of orofacial clefts. This study aimed to evaluate the association between EYA1 gene polymorphism and NSOC in western Chinese population. METHOD: Two single-nucleotide polymorphisms, rs13260349 and rs2380716, were investigated among 199 case-parent trios, and the linkage disequilibrium (LD) test, transmission disequilibrium test, family based association test, and haplotype analysis were performed. RESULTS: Weak evidence of LD was found between these markers (D' = 0.573, r(2) = 0.218); allel C and genotype C/C at rs13260349 showed an overtransmission in CL/P; haplotype T-T (rs13260349-rs2380716) displayed an association with NSOC and CL/P. CONCLUSIONS: The results showed evidence of weak association between the two SNPs of EYA1 (rs13260349 and rs2380716) and NSOC.

A Novel Method for Multi-subject fMRI Data Analysis: Independent Component Analysis with Clustering Embedded (ICA-CE).

The analysis of multi-subject functional magnetic resonance imaging (fMRI) data and the extraction of accurate brain functional networks (FNs) are of great importance. However, traditional independent component analysis (ICA) methods perform analysis on multi-subject fMRI data under the condition of known or assumed classes of subjects, which may decrease its ability to extract accurate individual brain FNs. Although a previous method named clusterwise ICA (C-ICA) clusters subjects and obtains shared FNs in group-level for each class, its clustering performance on complex data is not ideal. To address the issues, we propose a novel method called independent component analysis with clustering embedded (ICA-CE) that can achieve both the estimation of individual FNs and the clustering of subjects in an unsupervised or semi-supervised manner. Using the simulated data with different properties, ICA-CE achieved better clustering performance than group ICA followed by K-means and C-ICA, and the mean accuracy of extracted individual FNs obtained by ICA-CE was greater than 90%. Using the task-related fMRI data from Human Connectome Project (HCP), our method also achieved higher clustering accuracy, while extracting task-related class-specific FNs. In summary, ICA-CE is effective in estimating accurate brain FNs while achieving the clustering of multiple subjects.Clinical Relevance- Our method is promising in estimating accurate brain functional networks for patients with brain disorders and outputting related class label for each subject.

Lightweight forest smoke and fire detection algorithm based on improved YOLOv5.

Smoke and fire detection technology is a key technology for automatically realizing forest monitoring and forest fire warning. One of the most popular algorithms for object detection tasks is YOLOv5. However, it suffers from some challenges, such as high computational load and limited detection performance. This paper proposes a high-performance lightweight network model for detecting forest smoke and fire based on YOLOv5 to overcome these problems. C3Ghost and Ghost modules are introduced into the Backbone and Neck network to achieve the purpose of reducing network parameters and improving the feature's expressing performance. Coordinate Attention (CA) module is introduced into the Backbone network to highlight the object's important information about smoke and fire and to suppress irrelevant background information. In Neck network part, in order to distinguish the importance of different features in feature fusing process, the weight parameter of feature fusion is added which is based on PAN (path aggregation network) structure, which is named PAN-weight. Multiple sets of controlled experiments were conducted to confirm the proposed method's performance. Compared with YOLOv5s, the proposed method reduced the model size and FLOPs by 44.75% and 47.46% respectively, while increased precision and mAP(mean average precision)@0.5 by 2.53% and 1.16% respectively. The experimental results demonstrated the usefulness and superiority of the proposed method. The core code and dataset required for the experiment are saved in this article at https://github.com/vinchole/zzzccc.git.

Development of Loop-Mediated Isothermal Amplification Method for Rapid and Sensitive Identification of Hermetia illucens (Diptera: Stratiomyidae).

The black soldier fly (BSF) is well known for its ability to biologically convert organic waste into insect biomass, including protein and oil, which can be utilised as animal feed. Since raw BSF products, such as BSF powder, are difficult to differentiate from other biological raw materials, therefore new analytical approaches are required. In this study, we have developed a new and fast method based on loop-mediated isothermal AMPlification (LAMP) reaction that can diagnose black soldier fly larvae and BSF byproducts with high accuracy, specificity and sensitivity. Species-specific primers for BSF were designed based on targeting the mitochondrial cytochrome C oxidase I (COI) gene. The assay was able to detect as low as 820 fg/L of BSF DNA in 60 min at 65 °C, which was a hundredfold higher than the detection limit of classical polymerase chain reaction and did not show cross-reactivity. In conclusion, the LAMP assay demonstrated excellent sensitivity and specificity to detect BSF and BSF byproducts, with a sampling-to-result identification time of 60 min.

A Theranostic Probe for Promotion of Skin Wound Healing by Exudate-Triggered H2S Release with Self-Monitoring Ability.

Hydrogen sulfide (H2S) as an endogenous gasotransmitter plays a critical role in promotion of wound healing. However, the current H2S release system lacks the in situ monitoring ability, which may lead to insufficient or overdose release of H2S and serious side effects. Herein, we develop a self-monitoring theranostic probe TPATCF-S, which can quickly release H2S under water stimuli associated with a self-monitoring ability by a color change from colorless to deep blue. With a full thickness dermal defect as a model, the TPATCF-S absorbed on alginate dressings can be used for wound exudate-responsive release of H2S to efficiently promote skin wound healing.