RESUMO
The floral nectary, first recognized and described by Carl Linnaeus, is a remarkable organ that serves to provide carbohydrate-rich nectar to visiting pollinators in return for gamete transfer between flowers. Therefore, the nectary has indispensable biological significance in plant reproduction and even in evolution. Only two genes, CRC and STY, have been reported to regulate floral nectary development. However, it is still unknown what genes contribute to extrafloral nectary development. Here, we report that a nectary development gene in Gossypium (GoNe), annotated as an APETALA 2/ethylene-responsive factor (AP2/ERF), is responsible for the formation of both floral and extrafloral nectaries. GoNe plants that are silenced via virus-induced gene silencing technology and/or knocked out by Cas9 produce a nectariless phenotype. Point mutation and gene truncation simultaneously in duplicated genes Ne1 Ne2 lead to impaired nectary development in tetraploid cotton. There is no difference in the expression of the CRC and STY genes between the nectary TM-1 and the nectariless MD90ne in cotton. Therefore, the GoNe gene responsible for the formation of floral and extrafloral nectaries may be independent of CRC and STY. A complex mechanism might exist that restricts the nectary to a specific position with different genetic factors. Characterization of these target genes regulating nectary production has provided insights into the development, evolution, and function of nectaries and insect-resistant breeding.
Assuntos
Gossypium/genética , Proteínas de Plantas/metabolismo , Evolução Biológica , Flores/genética , Flores/crescimento & desenvolvimento , Gossypium/crescimento & desenvolvimento , Proteínas de Homeodomínio/genética , Proteínas de Homeodomínio/metabolismo , Mutação , Néctar de Plantas/metabolismo , Proteínas de Plantas/genéticaRESUMO
BACKGROUND: Advances in genome sequencing technology, particularly restriction-site associated DNA sequence (RAD-seq) and whole-genome resequencing, have greatly aided the construction of cotton interspecific genetic maps based on single nucleotide polymorphism (SNPs), Indels, and other types of markers. High-density genetic maps can improve accuracy of quantitative trait locus (QTL) mapping, narrow down location intervals, and facilitate identification of the candidate genes. RESULT: In this study, 249 individuals from an interspecific F2 population (TM-1 and Hai7124) were re-sequenced, yielding 6303 high-confidence bin markers spanning 5057.13 cM across 26 cotton chromosomes. A total of 3380 recombination hot regions RHRs were identified which unevenly distributed on the 26 chromosomes. Based on this map, 112 QTLs relating to agronomic and physiological traits from seedling to boll opening stage were identified, including 15 loci associated with 14 traits that contained genes harboring nonsynonymous SNPs. We analyzed the sequence and expression of these ten candidate genes and discovered that GhRHD3 (GH_D10G0500) may affect fiber yield while GhGPAT6 (GH_D04G1426) may affect photosynthesis efficiency. CONCLUSION: Our research illustrates the efficiency of constructing a genetic map using binmap and QTL mapping on the basis of a certain size of the early-generation population. High-density genetic map features high recombination exchanges in number and distribution. The QTLs and the candidate genes identified based on this high-density genetic map may provide important gene resources for the genetic improvement of cotton.
Assuntos
Gossypium , Locos de Características Quantitativas , Mapeamento Cromossômico , Fibra de Algodão , Gossypium/genética , Fenótipo , Análise de Sequência de DNARESUMO
Interspecific genomic variation can provide a genetic basis for local adaptation and domestication. A series of studies have presented its role of interspecific haplotypes and introgressions in adaptive traits, but few studies have addressed their role in improving agronomic character. Two allotetraploid Gossypium species, Gossypium barbadense (Gb) and G. hirsutum (Gh) originating from the Americas, are cultivated independently. Here, through sequencing and the comparison of one GWAS panel in 229 Gb accessions and two GWAS panels in 491 Gh accessions, we found that most associated loci or functional haplotypes for agronomic traits were highly divergent, representing the strong divergent improvement between Gb and Gh. Using a comprehensive interspecific haplotype map, we revealed that six interspecific introgressions from Gh to Gb were significantly associated with the phenotypic performance of Gb, which could explain 5%-40% of phenotypic variation in yield and fibre qualities. In addition, three introgressions overlapped with six associated loci in Gb, indicating that these introgression regions were under further selection and stabilized during improvement. A single interspecific introgression often possessed yield-increasing potential but decreased fibre qualities, or the opposite, making it difficult to simultaneously improve yield and fibre qualities. Our study not only has proved the importance of interspecific functional haplotypes or introgressions in the divergent improvement of Gb and Gh, but also supports their potential value in further human-mediated hybridization or precision breeding.
Assuntos
Gossypium , Melhoramento Vegetal , Mapeamento Cromossômico , Fibra de Algodão , Domesticação , Gossypium/genética , FenótipoRESUMO
Hybrid lethality forms a reproductive barrier that has been found in many eukaryotes. Most cases follow the Bateson-Dobzhansky-Muller genetic incompatibility model and involve two or more loci. In this study, we demonstrate that a coiled-coil nucleotide-binding site leucine-rich repeat (CC-NBS-LRR) gene is the causal gene underlying the Le4 locus for interspecific hybrid lethality between Gossypium barbadense and G. hirsutum (cotton). Silencing this CC-NBS-LRR gene can restore F1 plants from a lethal to a normal phenotype. A total of 11 099 genes were differentially expressed between the leaves of normal and lethal F1 plants, of which genes related to autoimmune responses were highly enriched. Genes related to ATP-binding and ATPase were up-regulated before the lethal syndrome appeared; this may result in the conversion of Le4 into an active state and hence trigger immune signals in the absence of biotic/abiotic stress. We discuss our results in relation to the evolution and domestication of Sea Island cottons and the molecular mechanisms of hybrid lethality associated with autoimmune responses. Our findings provide new insights into reproductive isolation and may benefit cotton breeding.
Assuntos
Genes de Plantas , Gossypium/genética , Hibridização GenéticaRESUMO
The genetic basis of heterosis has not been resolved for approximately a century, although the role of loci with overdominant (ODO) effects has continued to be discussed by biologists. In the present investigation, a proposed model was studied in Gossypium hirsutum L. introgression lines (ILs) harbouring a segment of G. barbadense. These introgressions were confirmed by a single marker of G. barbadense. These ILs contained 396 quantitative trait loci (QTLs) for 11 yield and non-yield traits that were recorded in the field on homozygous and heterozygous plants for 5 years. After comparing the different types of QTLs between the yield group and the non-yield group, it was found that the yield group had significantly higher ODO QTL ratios. Moreover, 16 ODO QTLs identified for 5 yield-related traits were consistently detected during 5 cotton growing seasons (2010-2011 and 2013-2015): 6 of 7 for boll weight, 3 of 11 for seed-cotton yield per plant, 4 of 17 for boll number, 2 of 13 for lint yield per plant and 1 of 11 for lint percentage. Therefore, we propose that overdominance is the major genetic basis of lint yield heterosis in interspecific hybrids between G. barbadense and G. hirsutum. These findings have important implications in cotton breeding in that the boll weight can be improved by utilizing ODO QTLs via heterosis; thus, the stagnant yield barrier can be smashed to achieve sustainable increases in cotton production. Additionally, this concept can be translated to other field crops for improving their yield potential.
Assuntos
Quimera/genética , Gossypium/genética , Vigor Híbrido , Padrões de Herança , Característica Quantitativa Herdável , Cruzamentos Genéticos , Introgressão Genética , Gossypium/classificação , Heterozigoto , Homozigoto , Fenótipo , Melhoramento Vegetal/métodos , Locos de Características QuantitativasRESUMO
This study demonstrates the first practical use of CSILs for the transfer of fiber quality QTLs into Upland cotton cultivars using SSR markers without detrimentally affecting desirable agronomic characteristics. Gossypium hirsutum is characterized by its high lint production and medium fiber quality compared to extra-long staple cotton G. barbadense. Transferring valuable traits or genes from G. barbadense into G. hirsutum is a promising but challenging approach through a traditional interspecific introgression strategy. We developed one set of chromosome segment introgression lines (CSILs), where TM-1, the genetic standard in G. hirsutum, was used as the recipient parent and the long staple cotton G. barbadense cv. Hai7124 was used as the donor parent by molecular marker-assisted selection (MAS). Among them, four CSILs, IL040-A4-1, IL080-D6-1, IL088-A7-3 and IL019-A2-6, found to be associated with superior fiber qualities including fiber length, strength and fineness QTL in Xinjiang were selected and backcrossed, and transferred these QTLs into three commercial Upland cotton cultivars such as Xinluzao (XLZ) 26, 41 and 42 grown in Xinjiang. By backcrossing and self-pollinating twice, five improved lines (3262-4, 3389-2, 3326-3, 3380-4 and 3426-5) were developed by MAS of background and introgressed segments. In diverse field trials, these QTLs consistently and significantly offered additive effects on the target phenotype. Furthermore, we also pyramided two segments from different CSILs (IL080-D6-1 and IL019-A2-6) into cultivar 0768 to accelerate breeding process purposefully with MAS. The improved lines pyramided by these two introgressed segments showed significant additive epistatic effects in four separate field trials. No significant alteration in yield components was observed in these modified lines. In summary, we first report that these CSILs have great potential to improve fiber qualities in Upland cotton MAS breeding programs.
Assuntos
Fibra de Algodão , Genes de Plantas , Marcadores Genéticos , Gossypium/genética , Cruzamento , Cromossomos de Plantas/genética , Cruzamentos Genéticos , DNA de Plantas/genética , Repetições de Microssatélites , Locos de Características QuantitativasRESUMO
KEY MESSAGE: We report the first complete set of alien addition lines of G. hirsutum . The characterized lines can be used to introduce valuable traits from G. australe into cultivated cotton. Gossypium australe is a diploid wild cotton species (2n = 26, GG) native to Australia that possesses valuable characteristics unavailable in the cultivated cotton gene pool, such as delayed pigment gland morphogenesis in the seed and resistances to pests and diseases. However, it is very difficult to directly transfer favorable traits into cultivated cotton through conventional gene recombination due to the absence of pairing and crossover between chromosomes of G. australe and Gossypium hirsutum (2n = 52, AADD). To enhance the transfer of favorable genes from wild species into cultivated cotton, we developed a set of hirsutum-australe monosomic alien chromosome addition lines (MAAL) using a combination of morphological survey, microsatellite marker-assisted selection, and molecular cytogenetic analysis. The amphidiploid (2n = 78, AADDGG) of G. australe and G. hirsutum was consecutively backcrossed with upland cotton to develop alien addition lines of individual G. australe chromosomes in G. hirsutum. From these backcross progeny, we generated the first complete set of chromosome addition lines in cotton; 11 of 13 lines are monosomic additions, and chromosomes 7G(a) and 13G(a) are multiple additions. MAALs of 1G(a) and 11G(a) were the first to be isolated. The chromosome addition lines can be employed as bridges for the transfer of desired genes from G. australe into G. hirsutum, as well as for gene assignment, isolation of chromosome-specific probes, flow sorting and microdissection of chromosome, development of chromosome-specific ''paints'' for fluorochrome-labeled DNA fragments, physical mapping, and selective isolation and mapping of cDNAs for a particular G. australe chromosome.
Assuntos
Gossypium/genética , Hibridização Genética , Cromossomos de Plantas , Técnicas de Transferência de Genes , Genes de Plantas , Genoma de Planta , Gossypium/anatomia & histologia , Gossypium/citologia , Repetições de Microssatélites , FenótipoRESUMO
The sustainable disposal of high-moisture municipal sludge (MS) has received increasing attention. Thermochemical conversion technologies can be used to recycle MS into liquid/gas bio-fuel and value-added solid products. In this review, we compared energy recovery potential of common thermochemical technologies (i.e., incineration, pyrolysis, hydrothermal conversion) for MS disposal via statistical methods, which indicated that hydrothermal conversion had a great potential in achieving energy recovery from MS. The application of machine learning (ML) in MS recycling was discussed to decipher complex relationships among MS components, process parameters and physicochemical reactions. Comprehensive ML models should be developed considering successive reaction processes of thermochemical conversion in future studies. Furthermore, challenges and prospects were proposed to improve effectiveness of ML for energizing thermochemical conversion of MS regarding data collection and preprocessing, model optimization and interpretability. This review sheds light on mechanism exploration of MS thermochemical recycling by ML, and provide practical guidance for MS recycling.
Assuntos
Esgotos , Gerenciamento de Resíduos , Gerenciamento de Resíduos/métodos , Reciclagem , IncineraçãoRESUMO
Pyrolysis vapor is an important byproduct in the production of biochar from biomass waste, and its emission may pose potential environmental risks. To achieve green production of biochar and efficient utilization of pyrolysis vapors, a novel strategy is proposed in this study to use pristine biochar as an adsorbent to adsorb the pyrolysis vapors. According to thermogravimetry-Fourier infrared spectroscopy-mass spectrometry evaluation, the evolved vapors mainly consisted of oxygenated compounds, hydrocarbons, CO2, CO, and H2O. With pyrolysis temperature increasing, ethers, phenols, hydrocarbons, acids/ketones, and CO2 were changed in the same direction based on two-dimensional correlation spectroscopy analysis. Moreover, butene, propargyl alcohol, and butane were the most abundant ionic fragments. After adsorbing pyrolysis vapors, the heating value of the biochar increased by a maximum of 3.2 MJ kg-1 with changes of physicochemical properties. This strategy provides a theoretical basis for green preparation of biochar while recovering energy from pyrolysis vapors.
Assuntos
Dióxido de Carbono , Pirólise , Adsorção , Dióxido de Carbono/química , Biomassa , Carvão Vegetal/química , GasesRESUMO
In the context of advocating carbon neutrality, there are new requirements for sustainable management of municipal sludge (MS). Hydrothermal carbonization (HTC) is a promising technology to deal with high-moisture MS considering its low energy consumption (without drying pretreatment) and value-added products (i.e., hydrochar). This study applied machine learning (ML) methods to conduct a holistic assessment with higher heating value (HHV) of hydrochar, carbon recovery (CR), and energy recovery (ER) as model targets, yielding accurate prediction models with R2 of 0.983, 0.844 and 0.858, respectively. Furthermore, MS properties showed positive (e.g., carbon content, HHV) and negative (e.g., ash content, O/C, and N/C) influences on the hydrochar HHV. By comparison, HTC parameters play a critical role for CR (51.7%) and ER (52.5%) prediction. The primary sludge was an optimal HTC feedstock while anaerobic digestion sludge had the lowest potential. This study provided a comprehensive reference for sustainable MS treatment and industrial application.
Assuntos
Carbono , Esgotos , TemperaturaRESUMO
The excellent Upland cotton (Gossypium hirsutum) cultivars developed since 1949 have made a huge contribution to cotton production in China, the world's largest producer and consumer of cotton. However, the genetic and genomic basis for the improvements of these cotton cultivars remains largely unclear. In this study, we selected 16 Upland cotton cultivars with important historical status in Chinese cotton breeding and constructed a multiparent, advanced generation, intercross (MAGIC) population comprising 920 recombinant inbred lines. A genome-wide association study using the MAGIC population identified 54 genomic loci associated with lint yield and fiber quality. Of them, 25 (46.30%) pleiotropic genomic loci cause simultaneous changes of lint yield and/or fiber quality traits, revealing complex trade-offs and linkage drags in Upland cotton agronomic traits. Deep sequencing data of 11 introduced ancestor cultivars and publicly available resequencing datasets of 839 cultivars developed in China during the past 70 years were integrated to explore the historical distribution and origin of the elite or selected alleles. Interestingly, 85% of these elite alleles were selected and fixed from different American ancestors, consistent with cotton breeding practices in China. However, seven elite alleles of native origin that are responsible for Fusarium wilt resistance, early maturing, good-quality fiber, and other characteristics were not found in American ancestors but have greatly contributed to Chinese cotton breeding and wide cultivation. Taken together, these results provide a genetic basis for further improving cotton cultivars and reveal that the genetic composition of Chinese cotton cultivars is narrow and mainly derived from early introduced American varieties.
Assuntos
Fibra de Algodão , Gossypium , Gossypium/genética , Estudo de Associação Genômica Ampla , Melhoramento Vegetal , GenômicaRESUMO
Gossypium hirsutum is a high yield cotton species that exhibits only moderate performance in fiber qualities. A promising but challenging approach to improving its phenotypes is interspecific introgression, the transfer of valuable traits or genes from the germplasm of another species such as G. barbadense, an important cultivated extra long staple cotton species. One set of chromosome segment introgression lines (CSILs) was developed, where TM-1, the genetic standard in G. hirsutum, was used as the recipient parent and the long staple cotton G. barbadense Hai7124 was used as the donor parent by molecular marker-assisted selection (MAS) in BC(5)S(14) and BC(4)S(13) generations. After four rounds of MAS, the CSIL population was comprised of 174 lines containing 298 introgressed segments, of which 86 (49.4%) lines had single introgressed segments. The total introgressed segment length covered 2,948.7 cM with an average length of 16.7 cM and represented 83.3% of tetraploid cotton genome. The CSILs were highly varied in major fiber qualities. By integrated analysis of data collected in four environments, a total of 43 additive quantitative trait loci (QTL) and six epistatic QTL associated with fiber qualities were detected by QTL IciMapping 3.0 and multi-QTL joint analysis. Six stable QTL were detected in various environments. The CSILs developed and the analyses presented here will enhance the understanding of the genetics of fiber qualities in long staple G. barbadense and facilitate further molecular breeding to improve fiber quality in Upland cotton.
Assuntos
Fibra de Algodão , Gossypium/genética , Mapeamento Cromossômico , Cromossomos de Plantas , Cruzamentos Genéticos , Meio Ambiente , Epistasia Genética , Variação Genética , Genoma de Planta , Genótipo , Modelos Genéticos , Fenótipo , Locos de Características Quantitativas , Análise de Sequência de DNARESUMO
During the coronavirus 2019 (COVID-19) pandemic, there has been a dramatic increase in the use of medical products and personal protective equipment, such as masks, gowns, and disposable syringes, to treat patients or administer vaccines. However, this may lead to generation of large quantities of biohazardous medical waste. Here, an alternating-magnetic-field-initiated catalytic strategy is proposed to convert disposable syringes into hydrogen-rich gases and high-value graphite. Specifically, in addition to selecting heavy fraction of bio-oil as initiator, disposable syringe needles are used as radio frequency electromagnetic wave receptors to initiate the deconstruction of disposable syringe plastic. The highest H2 yield of 39.9 mmol g-1 is achieved, and 30.1 mmol g-1 is maintained after 10 cycles. Moreover, a high carbon yield of 286 mg g-1 can be obtained. Beyond disposable syringes, this strategy could help to solve the emerging issue for other types of medical waste (e.g., mask and protective clothing) disposal.
RESUMO
Net carbon management of agro-residues has been an important pathway for reducing the environmental burdens of agricultural production. Converting agro-residues into biochar through pyrolysis is a prominent management strategy for achieving carbon neutrality in a circular economy, meeting both environmental and social concerns. Based on the latest studies, this study critically analyzes the life cycle assessment (LCA) of biochar production from different agro-residues and compares typical technologies for biochar production. Although a direct comparison of results is not always feasible due to different functional units and system boundaries, the net carbon sequestration potential of biochar technology is remarkably promising. By pyrolyzing agro-residues, biochar can be effectively produced and customized as: (i) alternative energy source, (ii) soil amendment, and (iii) activated carbon substitution. The combination of life cycle assessment and circular economy modelling is encouraged to achieve greener and sustainable biochar production.
Assuntos
Carvão Vegetal , Pirólise , Sequestro de Carbono , Carvão Vegetal/química , SoloRESUMO
Hydrothermal carbonization (HTC) provides a promising alternative to valorize food waste digestate (FWD) and avoid disposal issues. Although hydrochar derived from FWD alone had a low calorific content (HHV of 13.9 MJ kg-1), catalytic co-HTC of FWD with wet lignocellulosic biomass (e.g., wet yard waste; YW) and 0.5 M HCl exhibited overall superior attributes in terms of energy recovery (22.7 MJ kg-1), stable and comprehensive combustion behaviour, potential nutrient recovery from process water (2-fold higher N retention and 129-fold higher P extraction), and a high C utilization efficiency (only 2.4% C loss). In contrast, co-HTC with citric acid provided â¼3-fold higher autogenous pressure, resulting in a superior energy content of 25.0 MJ kg-1, but the high C loss (â¼74%) compromised the overall environmental benefits. The results of this study established a foundation to fully utilize FWD and YW hydrochar for bioenergy application and resource recovery from the process water.
Assuntos
Alimentos , Eliminação de Resíduos , Carbono , Nutrientes , TemperaturaRESUMO
After fiber, cottonseed is the second most important by-product of cotton production. However, high concentrations of toxic free gossypol deposited in the glands of the cottonseed greatly hamper its effective usage as food or feed. Here, we developed a cotton line with edible cottonseed by specifically silencing the endogenous expression of GoPGF in the seeds, which led to a glandless phenotype with an ultra-low gossypol content in the seeds and nearly normal gossypol in other parts of the plants. This engineered cotton maintains normal resistance to insect pests, but the gossypol content in the seeds dropped by 98%, and thus, it can be consumed directly as food. The trait of a low gossypol content in the cottonseeds was stable and heritable, while the protein, oil content, and fiber yield or quality were nearly unchanged compared to the transgenic receptor W0. In addition, comparative transcriptome analysis showed that down-regulated genes in the ovules of the glandless cotton were enriched in terpenoid biosynthesis, indicating the underlying relationship between gland formation and gossypol biosynthesis. These results pave the way for the comprehensive utilization of cotton as a fiber, oil, and feed crop in the future.
RESUMO
Enriching high-value chemicals from the pyrolysis of agricultural and forestry waste is an efficient way to achieve sustainable development and large-scale application of biomass pyrolysis. Phenols, as important chemical raw materials, spices and food additives, have attracted widespread attention. Herein, a novel technical route of torrefaction pretreatment combined with fractional condensation in pyrolysis loop was proposed to enrich the phenols in liquid products. In this study, the enrichment of phenols from the pyrolysis loop of walnut shell under the combination of torrefaction and fractional condensation was explored using a fixed-bed pyrolysis reactor equipped with a three-stage condensation system. Simultaneously, the effects of torrefaction on feedstocks were investigated through a thermogravimetric analyzer based on the characteristics of feedstocks. The results showed that the torrefaction and pyrolysis loop had a negative impact on the pyrolysis efficiency and the yield of liquid products, while the change in the condensation efficiency depended on the combined effects of torrefaction and pyrolysis loop. In addition, phenols tended to be enriched in the second condensation stage, especially phenol, o-cresol, 4-ethylphenol. Importantly, torrefaction could significantly enrich phenols in the liquid products, and the enrichment of phenols is relatively increased by 109.44% at least. Moreover, the pyrolysis loop was also beneficial to the enrichment of phenols, which was at least 90% higher than that of walnut shell. This study provided a potential route to enrich high value-added products from the pyrolysis loop of lignocellulosic biomass.
Assuntos
Juglans , Pirólise , Biomassa , Temperatura Alta , FenóisRESUMO
At present, it is very common to wear mask outdoors in order to avoid coronavirus disease 19 (COVID-19) infection. However, this leads to the formation of numerous plastic wastes that threaten humans and ecosystem. Against this major background, a novel co-pyrolysis coupled chemical vapor deposition (CVD) strategy is proposed to systematically convert mask and heavy fraction of bio-oil (HB) into biochar, bio-oil, and three-dimensional graphene films (3DGFs) is proposed. The biochar exhibits high higher heating value (HHV) (33.22-33.75 MJ/kg) and low ash content (2.34%), which is obviously superior to that of the walnut shell and anthracite coal. The bio-oil contains rich aromatic components, such as 1,2-dimethylbenzene and 2-methylnaphthalene, which can be used as chemical feedstock for insecticides. Furthermore, the 3DGF800 has a wide range of applications in the fields of oil spill cleanup and oil/water separation according to its fire resistance, high absorbability (40-89 g g-1) and long-term cycling stability. This research sheds new light on converting plastic wastes and industrial by-products into high added-value chemicals.
Assuntos
COVID-19 , Grafite , Biocombustíveis/análise , Carvão Vegetal , Ecossistema , Resíduos Perigosos , Temperatura Alta , Humanos , Óleos de Plantas , Polifenóis , SARS-CoV-2RESUMO
Allotetraploid cotton is an economically important natural-fiber-producing crop worldwide. After polyploidization, Gossypium hirsutum L. evolved to produce a higher fiber yield and to better survive harsh environments than Gossypium barbadense, which produces superior-quality fibers. The global genetic and molecular bases for these interspecies divergences were unknown. Here we report high-quality de novo-assembled genomes for these two cultivated allotetraploid species with pronounced improvement in repetitive-DNA-enriched centromeric regions. Whole-genome comparative analyses revealed that species-specific alterations in gene expression, structural variations and expanded gene families were responsible for speciation and the evolutionary history of these species. These findings help to elucidate the evolution of cotton genomes and their domestication history. The information generated not only should enable breeders to improve fiber quality and resilience to ever-changing environmental conditions but also can be translated to other crops for better understanding of their domestication history and use in improvement.
Assuntos
Genoma de Planta/genética , Gossypium/genética , Cromossomos de Plantas/genética , Fibra de Algodão , Domesticação , Expressão Gênica/genética , Variação Genética/genética , Estudo de Associação Genômica Ampla/métodos , Sequências Repetitivas de Ácido Nucleico/genéticaRESUMO
The fluidization behaviors and their differences for walnut shell (WS) assisted by different-sized sands at various blending proportions were investigated experimentally in a cold visual fluidized bed at ambient temperature and pressure. Through analyzing the fluidization characteristic curves, it was found that the WS/sand mixtures were clearly characterized by stratified fluidization during the fluidization process, presenting a velocity interval rather than a threshold for transition from fixed to fluidized bed. Sand-3, as the fluidizing medium, showed better performance for WS fluidization in terms of the relative difference between initial (U mf,i) and final fluidization velocity (U mf,f) as well as the average fluidization rate (R f). Furthermore, the regularity and mechanism of mixing and segregation of WS/sand mixtures in two fluidized regions (semi and completed) are discussed in detail based on the flow pattern diagram, the axial and radial distribution of the components, as well as the mixing index.