RESUMO
Organic semiconductors with noncovalently conformational locks (OSNCs) are promising building blocks for hole-transporting materials (HTMs). However, lack of satisfied neighboring building blocks negatively impacts the optoelectronic properties of OSNCs-based HTMs and imperils the stability of perovskite solar cells (PSCs). To address this limitation, we introduce the benzothieno[3,2-b]thiophene (BTT) to construct a new OSNC, and the resulting HTM ZS13 shows improved intermolecular charge extraction/transport properties, proper energy level, efficient surface passivation effect. Consequently, the champion devices based on doped ZS13 yield an efficiency of 24.39 % and 20.95 % for aperture areas of 0.1 and 1.01â cm2 , respectively. Furthermore, ZS13 shows good thermal stability and the capability of inhibiting I- ion migration, thus, leading to enhanced device stability. The success in neighboring-group engineering can triggered a strong interest in developing thienoacene-based OSNCs toward efficient and stable PSCs.
RESUMO
Two spiro-bifluorene-based dopant-free HTMs (X22 and X23) have been synthesized by facilely condensing spiro-bifluorene diamine with 3,4-ethylenedioxythiophene (EDOT)-5,7-dicarbonyl dichloride and 2,3,5,6-tetrafluoro-terephthaloyl dichloride, respectively. In the X22 molecule, lone pairs of electrons on the sulfur (S) and oxygen (O) functional groups interact with the perovskite materials. The hole mobility (µh) of X22 (3.9 × 10-4 cm2 V-1 S1-) is more than twice that of X23 (1.4 × 10-4 cm2 V-1 S1-). The conductivity (σ0) of X22 is 2.73 × 10-4 S cm-1, which is also higher than that of X23 (2.39 × 10-4 S cm-1). The EDOT moiety benefits the contact angle of CH3NH3PbI3 precursor solutions on HTMs as low as 24°. The X22-based device with an indium-doped tin oxide/hole transport material (HTM)/CH3NH3PbI3/phenyl-C61-butyric acid methyl ester (PC61BM)/bathocuproine/Ag structure achieves a power conversion efficiency (PCE) of 19.18%. The PCE of the device based on X23 containing fluorine is 18.70%, and the contact angle between HTM and the perovskite precursor solution is 32°. The X22- and X23-based devices at ambient temperature (≈25 °C) in N2 retain 86% and 79% of the initial PCE after 150 days. The effect of S, O, and F heteroatoms plays an important role in the side chain modification of HTMs, improving defect passivation in HTM/CH3NH3PbI3 interfaces by multiple functional groups.
RESUMO
Triamine-based HBPI membranes are known for high gas separation selectivity and physical stability, but their permeabilities are still very low. In this study, we utilized a tetramine monomer called TPDA (N,N,N',N'-tetrakis(4-aminophenyl)-1,4-benzenediamine) as a crosslinking center and incorporated an additional diamine comonomer called DAM (2,4,6-trimethyl-1,3-diaminobenzene) to enhance gas separation performance, especially gas permeability. The findings demonstrated that the resultant 6FDA-DAM/TPDA membranes based on tetramine TPDA exhibited a greater amount of free volume compared to the triamine-based HBPI membranes, resulting in significantly higher gas permeabilities. Furthermore, the higher concentration of DAM component led to the generation of more fractional free volumes (FFV). Consequently, the gas permeabilities of the 6FDA-DAM/TPDA membranes increased with an increase in DAM content, with a minimal compromise on selectivity. The enhanced gas permeabilities of the 6FDA-DAM/TPDA membranes enabled them to minimize the footprint required for membrane installations in real-world applications. Moreover, the 6FDA-DAM/TPDA membranes exhibited remarkable durability against physical aging and plasticization, thanks to the incorporation of a hyperbranched network structure.
RESUMO
The 6FDA-based network PI has attracted significant attention for gas separation. A facile strategy to tailor the micropore structure within the network PI membrane prepared by the in situ crosslinking method is extremely significant for achieving an advanced gas separation performance. In this work, the 4,4'-diamino-2,2'-biphenyldicarboxylic acid (DCB) or 3,5-diaminobenzoic acid (DABA) comonomer was incorporated into the 6FDA-TAPA network polyimide (PI) precursor via copolymerization. The molar content and the type of carboxylic-functionalized diamine were varied in order to easily tune the resulting network PI precursor structure. Then, these network PIs containing carboxyl groups underwent further decarboxylation crosslinking during the following heat treatment. Properties involving thermal stabilities, solubility, d-spacing, microporosity, and mechanical properties were investigated. Due to the decarboxylation crosslinking, the d-spacing and the BET surface areas of the thermally treated membranes were increased. Moreover, the content of DCB (or DABA) played a key role in determining the overall gas separation performance of the thermally treated membranes. For instance, after the heating treatment at 450 °C, 6FDA-DCB:TAPA (3:2) showed a large increment of about ~532% for CO2 gas permeability (~266.6 Barrer) coupled with a decent CO2/N2 selectivity~23.6. This study demonstrates that incorporating the carboxyl-containing functional unit into the PI backbone to induce decarboxylation offers a practical approach with which to tailor the micropore structure and corresponding gas transport properties of 6FDA-based network PIs prepared by the in situ crosslinking method.
RESUMO
Poly(3,4-ethylenedioxythiophene) (PEDOT) aggregate-deposited counter electrodes (CEs) were applied to bifacial dye-sensitized solar cells with a cobalt complex electrolyte. The high transparency and excellent electrochemical activity of PEDOT CEs result in an impressive cell bifaciality of 0.92 under standard test conditions (AM 1.5G, 100 mW cm-2), and maximum power production of 11.3% under realistic conditions with an effective albedo of 50%.
RESUMO
Exploring polymeric hole-transporting materials (HTMs) with passivation functions represents a simplified and effective approach to minimize the perovskite defect density. To date, most of reported polymeric HTMs were applied to fabricate n-i-p regular perovskite solar cells (PSCs). The polymers compatible for p-i-n inverted PSCs were very limited. Moreover, the passivation polymers were devoted to passivate the uncoordinated Pb2+. However, the MA+ cation defect has profound unwanted effect on device efficiency and long-term stability. In order to synchronously passivate the Pb2+ and MA+ defects in p-i-n inverted PSCs, a new nonfused polymer was intentionally explored via mild polymerization. The aromatic bridge instead of long alkyl chains enabled polymer BN-12 to achieve excellent thermal stability and good wettability of perovskite precursor. Furthermore, the incorporation of chemical anchor sites ("CâO" and "F") strongly controlled the crystallization of perovskite and restrained the MA+ ion migration. As a result, a significant fill factor (FF) of 82.9% and an enhanced power conversion efficiency (PCE) of 20.28% were achieved for MAPbI3-based devices with the dopant-free BN-12, exceeding those with the commercial HTM PTAA (FF = 81.7%, PCE = 19.51%). More importantly, the unencapsulated devices based on BN-12 realized outstanding long-term stability, maintaining approximately 95% of its initial efficiency after stored for 85 days. By contrast, the PTAA-based device showed rapid decrease which retained only 50% of its initial value after 45 days.
RESUMO
Three triphenylamine derivatives containing ferrocenyl groups (JW6, JW7 and JW8) were synthesized by facile syntheses. Their HOMO levels match the valence band energy of CH3NH3PbI3. The introduction of ferrocenyl was aimed to obtain hole transporting materials with high mobility for perovskite solar cells. JW7 shows higher hole mobility (4.2 × 10-4 cm2 V-1 s-1) than JW6 (1.3 × 10-4 cm2 V-1 s-1) and JW8 (1.5 × 10-4 cm2 V-1 s-1). Their film-forming properties are affected by their molecule structures. The methoxyl and N,N-dimethyl terminal substituents of JW7 and JW8 are beneficial for having better solubility than JW6. The regular mesoporous TiO2-based perovskite solar cells (n-i-p) and the inverted planar heterojunction perovskite solar cells (p-i-n) fabricated using JW7 show the highest power conversion efficiency of 9.36% and 11.43% under 100 mW cm-2 AM1.5G solar illumination. For p-i-n cells, the standard HTM PEDOT-based cell reaches an efficiency of 12.86% under the same conditions.
RESUMO
Four new hole transporting materials (HTMs), M107-M110, based on thieno[3,2-b]indole cores have been designed and employed in perovskite solar cells. The perovskite solar cells based on M109 exhibit a leading efficiency of 18.14% with a photovoltage over 1.11 V.
RESUMO
Organolead iodide perovskite showing tubular morphology was fabricated on mesoporous TiO2 film via a one-step spin-coating procedure. These perovskite tubes with the external diameter of 1 µm were found to facilitate the charge separation at perovskite/hole-transport material (HTM) interfaces. This engenders a tubular perovskite device showing a higher fill factor over the device with planar perovskite, and improves power conversion efficiency accordingly.
RESUMO
Two new truxene-based organic sensitizers (M15 and M16) featuring high extinction coefficients were synthesized for dye-sensitized solar cells employing cobalt electrolyte. The M16-sensitized device displays a 7.6% efficiency at an irradiation of AM1.5 full sunlight.