Beating the break-even point with a discrete-variable-encoded logical qubit.

Quantum error correction (QEC) aims to protect logical qubits from noises by using the redundancy of a large Hilbert space, which allows errors to be detected and corrected in real time1. In most QEC codes2-8, a logical qubit is encoded in some discrete variables, for example photon numbers, so that the encoded quantum information can be unambiguously extracted after processing. Over the past decade, repetitive QEC has been demonstrated with various discrete-variable-encoded scenarios9-17. However, extending the lifetimes of thus-encoded logical qubits beyond the best available physical qubit still remains elusive, which represents a break-even point for judging the practical usefulness of QEC. Here we demonstrate a QEC procedure in a circuit quantum electrodynamics architecture18, where the logical qubit is binomially encoded in photon-number states of a microwave cavity8, dispersively coupled to an auxiliary superconducting qubit. By applying a pulse featuring a tailored frequency comb to the auxiliary qubit, we can repetitively extract the error syndrome with high fidelity and perform error correction with feedback control accordingly, thereby exceeding the break-even point by about 16% lifetime enhancement. Our work illustrates the potential of hardware-efficient discrete-variable encodings for fault-tolerant quantum computation19.

Low power consumption grating magneto-optical trap based on planar elements.

The grating-based magneto-optical trap (GMOT) is a promising approach for miniaturizing cold-atom systems. However, the power consumption of a GMOT system dominates its feasibility in practical applications. In this study, we demonstrated a GMOT system based on planar elements that can operate with low power consumption. A high-diffraction-efficiency grating chip was used to cool atoms with a single incident beam. A planar coil chip was designed and fabricated with a low power consumption nested architecture. The grating and coil chips were adapted to a passive pump vacuum chamber, and up to 106 87Rb atoms were trapped. These elements effectively reduce the power consumption of the GMOT and have great potential for applications in practical cold-atom-based devices.

Photonic time-delayed reservoir computing based on series-coupled microring resonators with high memory capacity.

On-chip microring resonators (MRRs) have been proposed to construct time-delayed reservoir computing (RC) systems, which offer promising configurations available for computation with high scalability, high-density computing, and easy fabrication. A single MRR, however, is inadequate to provide enough memory for the computation task with diverse memory requirements. Large memory requirements are satisfied by the RC system based on the MRR with optical feedback, but at the expense of its ultralong feedback waveguide. In this paper, a time-delayed RC is proposed by utilizing a silicon-based nonlinear MRR in conjunction with an array of linear MRRs. These linear MRRs possess a high quality factor, providing enough memory capacity for the RC system. We quantitatively analyze and assess the proposed RC structure's performance on three classical tasks with diverse memory requirements, i.e., the Narma 10, Mackey-Glass, and Santa Fe chaotic timeseries prediction tasks. The proposed system exhibits comparable performance to the system based on the MRR with optical feedback, when it comes to handling the Narma 10 task, which requires a significant memory capacity. Nevertheless, the dimension of the former is at least 350 times smaller than the latter. The proposed system lays a good foundation for the scalability and seamless integration of photonic RC.

Magnetic-free polarization rotation in an atomic vapor cell.

Magnetic-free nonreciprocal optical devices have attracted great attention in recent years. Here, we investigated the magnetic-free polarization rotation of light in an atom vapor cell. Two mechanisms of magnetic-free nonreciprocity have been realized in ensembles of hot atoms, including electromagnetically induced transparency and optically-induced magnetization. For a linearly polarized input probe light, a rotation angle up to 86.4° has been realized with external control and pump laser powers of 10 mW and is mainly attributed to the optically-induced magnetization effect. Our demonstration offers a new approach to realize nonreciprocal devices, which can be applied to solid-state atom ensembles and may be useful in photonic integrated circuits.

Polarization-insensitive vortex beam generator by the holographic grating on an integrated multi-layer waveguide.

An integrated polarization-insensitive vortex beam generator is proposed in this study. It is composed of a holographic grating on a multi-layer waveguide, which enables conversion of Transverse Electric (TE) and Transverse Magnetic (TM) waveguide modes to y-polarized and x-polarized optical vortex beams, respectively. The conversion efficiency and the phase fidelity are numerically analyzed, and the working bandwidth is about 100 nm from 1500 nm to 1600 nm with a phase fidelity above 0.7. Moreover, the vortex beam with the superposition of the y-polarization and x-polarization states can be obtained with the incident of the superposition of TE and TM waveguide modes.

Electro-optically tunable optical delay on a lithium niobate photonic chip.

An approach for continuous tuning of on-chip optical delay with a microring resonator is proposed and demonstrated. By introducing an electro-optically tunable waveguide coupler, the bus waveguide to the resonance coupling can be effectively tuned from the under-coupling regime to the over-coupling regime. The optical delay is experimentally characterized by measuring the relative phase shift between lasers and shows a large dynamic range of delay from -600 to 600 ps and an efficient tuning of delay from -430 to -180 ps and from 40 to 240 ps by only a 5 V voltage.

Fluorescence collection efficiency of atoms in dipole traps.

The fluorescence collection from single atoms and emitters has been extensively utilized in quantum information and quantum optics research. Here, we investigated the collection efficiency of an objective lens by drawing an analogy between the free-space beam (FSB) and a waveguide mode. We explored how efficiency is influenced by their thermal motion within a dipole trap. Furthermore, we introduce an effective energy fraction ratio to quantify potential imperfections in the focusing of the objective lens. Our results provide valuable insights for optimizing the fluorescence collection in single-atom experiments and highlight the importance of considering realistic experimental conditions when estimating achievable efficiencies.

Repetition rate tuning and locking of solitons in a microrod resonator.

Recently, there has been significant interest in the generation of coherent temporal solitons in optical microresonators. In this Letter, we present a demonstration of dissipative Kerr soliton generation in a microrod resonator using an auxiliary-laser-assisted thermal response control method. In addition, we are able to control the repetition rate of the soliton over a range of 200 kHz while maintaining the pump laser frequency, by applying external stress tuning. Through the precise control of the PZT voltage, we achieve a stability level of 3.9 × 10-10 for residual fluctuation of the repetition rate when averaged 1 s. Our platform offers precise tuning and locking capabilities for the repetition frequency of coherent mode-locked combs in microresonators. This advancement holds great potential for applications in spectroscopy and precision measurements.

Measurement of Nanofiber Mechanical Flexural Modes Based on Near-Field Scattering.

We systematically investigated the intrinsic mechanical flexural modes of tapered optical fibers (TOFs) with a high aspect ratio up to 3×10^{4}. Based on the near-field scattering of the hemispherical microfiber tip to the vibrating TOF evanescent field, we detected more than 320 ordered intrinsic mechanical modes through the TOF transmission spectra which was enhanced by 72 dB compared to without near-field scattering. The trend of the vibration amplitude with the mode order was similar to pendulum waves. Our results open a pathway to study the mechanical modes of photonic microstructures-nanostructures that are expected to be used in waveguide QED, cavity optomechanical, and optical sensing.

Numerical analysis of on-chip acousto-optic modulators for visible wavelengths.

On-chip acousto-optic modulators that operate at an optical wavelength of 780 nm and a microwave frequency of 6.835 GHz are proposed. The modulators are based on a lithium-niobate-on-sapphire platform and efficiently excite surface acoustic waves and exhibit strong interactions with tightly confined optical modes in waveguides. In particular, a high-efficiency phase modulator and single-sideband mode converter are designed. We found that for both microwave and optical wavelengths below 1 µm, the interactions at the cross-sections of photonic waveguides are sensitive to the waveguide width and are significantly different from those in previous studies. Our designed devices have small footprints and high efficiencies, making them suitable for controlling rubidium atoms and realizing hybrid photonic-atomic chips. Furthermore, our devices have the potential to extend the acousto-optic modulators to other visible wavelengths for other atom transitions and for visible light applications, including imaging and sensing.

Collective Microwave Response for Multiple Gate-Defined Double Quantum Dots.

We fabricate and characterize a hybrid quantum device that consists of five gate-defined double quantum dots (DQDs) and a high-impedance NbTiN transmission resonator. The controllable interactions between DQDs and the resonator are spectroscopically explored by measuring the microwave transmission through the resonator in the detuning parameter space. Utilizing the high tunability of the system parameters and the high cooperativity (Ctotal > 17.6) interaction between the qubit ensemble and the resonator, we tune the charge-photon coupling and observe the collective microwave response changing from linear to nonlinear. Our results present the maximum number of DQDs coupled to a resonator and manifest a potential platform for scaling up qubits and studying collective quantum effects in semiconductor-superconductor hybrid cavity quantum electrodynamics systems.

Machine learning-assisted high-accuracy and large dynamic range thermometer in high-Q microbubble resonators.

Whispering gallery mode (WGM) resonators provide an important platform for fine measurement thanks to their small size, high sensitivity, and fast response time. Nevertheless, traditional methods focus on tracking single-mode changes for measurement, and a great deal of information from other resonances is ignored and wasted. Here, we demonstrate that the proposed multimode sensing contains more Fisher information than single mode tracking and has great potential to achieve better performance. Based on a microbubble resonator, a temperature detection system has been built to systematically investigate the proposed multimode sensing method. After the multimode spectral signals are collected by the automated experimental setup, a machine learning algorithm is used to predict the unknown temperature by taking full advantage of multiple resonances. The results show the average error of 3.8 × 10-3°C within the range from 25.00°C to 40.00°C by employing a generalized regression neural network (GRNN). In addition, we have also discussed the influence of the consumed data resource on its predicted performance, such as the amount of training data and the case of different temperate ranges between the training and test data. With high accuracy and large dynamic range, this work paves the way for WGM resonator-based intelligent optical sensing.

Data augmentation using continuous conditional generative adversarial networks for regression and its application to improved spectral sensing.

Machine learning-assisted spectroscopy analysis faces a prominent constraint in the form of insufficient spectral samples, which hinders its effectiveness. Meanwhile, there is a lack of effective algorithms to simulate synthetic spectra from limited samples of real spectra for regression models in continuous scenarios. In this study, we introduced a continuous conditional generative adversarial network (CcGAN) to autonomously generate synthetic spectra. The labels employed for generating the spectral data can be arbitrarily selected from within the range of labels associated with the real spectral data. Our approach effectively produced spectra using a small spectral dataset obtained from a self-interference microring resonator (SIMRR)-based sensor. The generated synthetic spectra were subjected to evaluation using principal component analysis, revealing an inability to discern them from the real spectra. Finally, to enhance the DNN regression model, these synthetic spectra are incorporated into the original training dataset as an augmentation technique. The results demonstrate that the synthetic spectra generated by CcGAN exhibit exceptional quality and significantly enhance the predictive performance of the DNN model. In conclusion, CcGAN exhibits promising potential in generating high-quality synthetic spectra and delivers a superior data augmentation effect for regression tasks.

Cavity-enhanced optical bistability of Rydberg atoms.

Optical bistability (OB) of Rydberg atoms provides a new, to the best of our knowledge, platform for studying nonequilibrium physics and a potential resource for precision metrology. To date, the observation of Rydberg OB has been limited in free space. Here, we explore cavity-enhanced Rydberg OB with a thermal cesium vapor cell. The signal of Rydberg OB in a cavity is enhanced by more than one order of magnitude compared with that in free space. The slope of the phase transition signal at the critical point is enhanced more than 10 times that without the cavity, implying an enhancement of two orders of magnitude in the sensitivity for Rydberg-based sensing and metrology.

Controllable atomic collision in a tight optical dipole trap.

Single atoms are interesting candidates for studying quantum optics and quantum information processing. Recently, trapping and manipulation of single atoms using tight optical dipole traps has generated considerable interest. Here we report an experimental investigation of the dynamics of atoms in a modified optical dipole trap with a backward propagating dipole trap beam, where a change in the two-atom collision rate by six times has been achieved. The theoretical model presented gives a prediction of high probabilities of few-atom loading rates under proper experimental conditions. This work provides an alternative approach to the control of the few-atom dynamics in a dipole trap and the study of the collective quantum optical effects of a few atoms.

Nonreciprocal Frequency Conversion and Mode Routing in a Microresonator.

The transportation of photons and phonons typically obeys the principle of reciprocity. Breaking reciprocity of these bosonic excitations will enable the corresponding nonreciprocal devices, such as isolators and circulators. Here, we use two optical modes and two mechanical modes in a microresonator to form a four-mode plaquette via radiation pressure force. The phase-controlled nonreciprocal routing between any two modes with completely different frequencies is demonstrated, including the routing of phonon to phonon (megahertz to megahertz), photon to phonon (terahertz to megahertz), and especially photon to photon with frequency difference of around 80 THz for the first time. In addition, one more mechanical mode is introduced to this plaquette to realize a phononic circulator in such single microresonator. The nonreciprocity is derived from interference between multimode transfer processes involving optomechanical interactions in an optomechanical resonator. It not only demonstrates the nonreciprocal routing of photons and phonons in a single resonator but also realizes the nonreciprocal frequency conversion for photons and circulation for phonons, laying a foundation for studying directional routing and thermal management in an optomechanical hybrid network.

Exceptional Entanglement Phenomena: Non-Hermiticity Meeting Nonclassicality.

Non-Hermitian (NH) extension of quantum-mechanical Hamiltonians represents one of the most significant advancements in physics. During the past two decades, numerous captivating NH phenomena have been revealed and demonstrated, but all of which can appear in both quantum and classical systems. This leads to the fundamental question: what NH signature presents a radical departure from classical physics? The solution of this problem is indispensable for exploring genuine NH quantum mechanics, but remains experimentally untouched so far. Here, we resolve this basic issue by unveiling distinct exceptional entanglement phenomena, exemplified by an entanglement transition, occurring at the exceptional point of NH interacting quantum systems. We illustrate and demonstrate such purely quantum-mechanical NH effects with a naturally dissipative light-matter system, engineered in a circuit quantum electrodynamics architecture. Our results lay the foundation for studies of genuinely quantum-mechanical NH physics, signified by exceptional-point-enabled entanglement behaviors.

Near-Field Modulation of Differently Oriented Single Photon Emitters with A Plasmonic Probe.

Single photon emitters (SPEs) are critical components of photon-based quantum technology. Recently, the interaction between surface plasmons and emitters has attracted increasing attention because of its potential to improve the quality of single-photon sources through stronger light-matter interactions. In this work, we use a hybrid plasmonic probe composed of a fiber taper and silver nanowire to controllably modulate the radiation properties of SPEs with differently oriented polarization. For out-of-plane oriented SPEs such as single CdSe quantum dots, the radiation lifetime could be reduced by a factor as large as seven; for in-plane oriented SPEs such as hBN defect SPEs, the average modulation amplitude varied from 0.69 to 1.23, depending on the position of the probe. The experimental results were highly consistent with the simulations and theory. This work provides an efficient approach for optimizing the properties of SPEs for quantum photonic integration.

3D-Printed Möbius Microring Lasers: Topology Engineering in Photonic Microstructures.

Manipulating photons in artificially structured materials is highly desired in modern photonic technology. Nontrivial topological structures are rapidly emerging as a state-of-art platform for achieving unprecedented fascinating phenomena of photon manipulation. However, the current studies mainly focus on planar structures, and the fabrication of photonic microstructures with specific topological geometric features still remains a great challenge. Extending the topological photonics to 3D microarchitectures is expected to enrich the photon manipulation capabilities and further advance the topological photonic devices. Here, a femtosecond laser direct writing technique is employed to fabricate 3D topological Möbius microring resonators from dye-doped polymer. The high-quality-factor Möbius microring resonator supports a unique spin-orbit coupled lasing at very low threshold. Due to the spin-orbit coupling induced geometric/Berry phase, the Möbius microrings, in striking contrast with ordinary microrings, output laser signals with all polarization states. The manipulation of miniaturized coherent light sources in the fabricated Möbius microrings represents a significant step forward toward 3D topological photonics that offers a novel design philosophy for functional photonic and optoelectronic devices.

Thermal tuning of mode crossing and the perfect soliton crystal in a Si3N4 microresonator.

Dissipative Kerr solitons in high quality microresonators have attracted much attention in the past few years. They provide ideal platforms for a number of applications. Here, we fabricate the Si3N4 microring resonator with anomalous dispersion for the generation of single soliton and soliton crystal. Based on the strong thermal effect in the high-Q microresonator, the location and strength of the avoided mode crossing in the device can be changed by the intracavity power. Because the existence of the avoided mode crossing can induce the perfect soliton crystal with specific soliton number, we could choose the appropriate pumped resonance mode and appropriate pump power to obtain the perfect soliton crystals on demand.