RESUMO
: A ductile iron wheel used for a rail-transit vehicle was treated with a recommended heat-treatment process. The ductile iron wheel after heat treatment was composed of graphite nodules and tempered sorbite with an area fraction of 98%. A friction test of the ductile iron and carbon steel wheel materials was systematically performed under different normal loads and sliding velocities. The results indicated that the wear mechanism of the ductile iron wheel changed from adhesion to abrasion with an increase in the normal load level. Adhesion was the main wear mechanism at different sliding velocities and normal load level. The impact of the normal load on the wear mechanism was greater than that of the sliding velocity. Since the ductile iron wheel material had excellent thermal property and higher carbon content, it exhibited a lower wear rate, a smaller difference value of the friction coefficient, and plastic deformation on the worn surface than those of the carbon steel wheel material. This indicates that ductile iron wheels may have a longer wear life, greater traction, and higher stability during operation than carbon steel wheels. The iron wheels have the potential for being applied in rail-transit vehicles.
RESUMO
A dynamic model based on BaCe0.9Y0.1O3-δ (BCY10) perovskite membrane for steam permeation process is presented here to essentially investigate the internal mechanism. The transient concentration distribution and flux of the charged species and the electric potential distribution within the membrane on the steam permeation process are analyzed in detail via simulation based on this model. The results indicate that the flux of steam can be improved via elevating operating temperatures, enlarging the difference of the partial steam pressure between two sides of the membrane, increasing the membrane density, and reducing the membrane thickness. Moreover, it was found that the polarization electric potential between both sides of the membrane occurs during the steam permeation process, especially at the steady state of the steam permeation process. The polarization electric potential reaches the maximum value at about 1050 K in this membrane. The evolution of electric potential can explain the influence of the above-mentioned factors on the steam permeation process. This study advances the mechanism of steam permeation through perovskite membrane, which provides a new strategy for the fundamental investigation of related species permeation (oxygen, carbon dioxide, hydrogen, etc.) on inorganic membranes via transient modeling.