Heteroleptic Pd(II) and Pt(II) Complexes with Redox-Active Ligands: Synthesis, Structure, and Multimodal Anticancer Mechanism.

A series of heteroleptic square-planar Pt and Pd complexes with bis(diisopropylphenyl) iminoacenaphtene (dpp-Bian) and Cl, 1,3-dithia-2-thione-4,5-dithiolate (dmit), or 1,3-dithia-2-thione-4,5-diselenolate (dsit) ligands have been prepared and characterized by spectroscopic techniques, elemental analysis, X-ray diffraction analysis, and cyclic voltammetry (CV). The intermolecular noncovalent interactions in the crystal structures were assessed by density functional theory (DFT) calculations. The anticancer activity of Pd complexes in breast cancer cell lines was limited by their solubility. Pd(dpp-Bian) complexes with dmit and dsit ligands as well as an uncoordinated dpp-Bian ligand were devoid of cytotoxicity, while the [Pd(dpp-Bian)Cl2] complex was cytotoxic. On the contrary, all Pt(dpp-Bian) complexes demonstrated anticancer activity in a low micromolar concentration range, which was 8-20 times higher than the activity of cisplatin, and up to 2.5-fold selectivity toward cancer cells over healthy fibroblasts. The presence of a redox-active dpp-Bian ligand in Pt and Pd complexes resulted in the induction of reactive oxygen species (ROS) in cancer cells. In addition, these complexes were able to intercalate into DNA, indicating the dual mechanism of action.

Acetone Factor in the Design of Cu4-, Cu6-, and Cu9-Based Cage Coppersilsesquioxanes: Synthesis, Structural Features, and Catalytic Functionalization of Alkanes.

The present study describes a new feature in the self-assembly of cagelike copperphenylsilsesquioxanes: the strong influence of acetone solvates on cage structure formation. By this simple approach, a series of novel tetra-, hexa-, or nonacoppersilsesquioxanes were isolated and characterized. In addition, several new complexes of Cu4 or Cu6 nuclearity bearing additional nitrogen-based ligands (ethylenediamine, 2,2'-bipyridine, phenanthroline, bathophenanthroline, or neocuproine) were produced. Single-crystal X-ray diffraction studies established molecular architectures of all of the synthesized products. Several coppersilsesquioxanes represent a novel feature of cagelike metallasilsesquioxane (CLMS) in terms of molecular topology. A Cu4-silsesquioxane complex with ethylenediamine (En) ligands was isolated via the unprecedented self-assembly of a partly condensed framework of silsesquioxane ligands, followed by the formation of a sandwich-like cage. Two prismatic Cu6 complexes represent the different conformers─regular and elliptical hexagonal prisms, "cylinders", determined by the different orientations of the coordinated acetone ligands ("shape-switch effect"). A heterometallic Cu4Na4-sandwich-like derivative represents the first example of a metallasilsesquioxane complex with diacetone alcohol ligands formed in situ due to acetone condensation reaction. As a selected example, the compound [(Ph6Si6O11)2Cu4En2]·(acetone)2 was explored in homogeneous oxidation catalysis. It catalyzes the oxidation of alkanes to alkyl hydroperoxides with hydrogen peroxide and the oxidation of alcohols to ketones with tert-butyl hydroperoxide. Radical species take part in the oxidation of alkanes. Besides, [(Ph6Si6O11)2Cu4En2]·(acetone)2 catalyzes the mild oxidative functionalization of gaseous alkanes (ethane, propane, n-butane, and i-butane). Two different model reactions were investigated: (1) the oxidation of gaseous alkanes with hydrogen peroxide to give a mixture of oxygenates (alcohols, ketones, or aldehydes) and (2) the carboxylation of Cn gaseous alkanes with carbon monoxide, water, and potassium peroxodisulfate to give Cn+1 carboxylic acids (main products), along with the corresponding Cn oxygenates. For these reactions, the effects of acid promoter, reaction time, and substrate scope were explored. As expected for free-radical-type reactions, the alkane reactivity follows the trend C2H6 < C3H8 < n-C4H10 < i-C4H10. The highest total product yields were observed in the carboxylation of i-butane (up to 61% based on i-C4H10). The product yields and catalyst turnover numbers (TONs) are remarkable, given an inertness of gaseous alkanes and very mild reaction conditions applied (low pressures, 50-60 °C temperatures).

Thiacalixarenes with Sulfur Functionalities at Lower Rim: Heavy Metal Ion Binding in Solution and 2D-Confined Space.

Sulfur-containing groups preorganized on macrocyclic scaffolds are well suited for liquid-phase complexation of soft metal ions; however, their binding potential was not extensively studied at the air-water interface, and the effect of thioether topology on metal ion binding mechanisms under various conditions was not considered. Herein, we report the interface receptor characteristics of topologically varied thiacalixarene thioethers (linear bis-(methylthio)ethoxy derivative L2, O2S2-thiacrown-ether L3, and O2S2-bridged thiacalixtube L4). The study was conducted in bulk liquid phase and Langmuir monolayers. For all compounds, the highest liquid-phase extraction selectivity was revealed for Ag+ and Hg2+ ions vs. other soft metal ions. In thioether L2 and thiacalixtube L4, metal ion binding was evidenced by a blue shift of the band at 303 nm (for Ag+ species) and the appearance of ligand-to-metal charge transfer bands at 330-340 nm (for Hg2+ species). Theoretical calculations for thioether L2 and its Ag and Hg complexes are consistent with experimental data of UV/Vis, nuclear magnetic resonance (NMR) spectroscopy, and single-crystal X-ray diffractometry of Ag-thioether L2 complexes and Hg-thiacalixtube L4 complex for the case of coordination around the metal center involving two alkyl sulfide groups (Hg2+) or sulfur atoms on the lower rim and bridging unit (Ag+). In thiacrown L3, Ag and Hg binding by alkyl sulfide groups was suggested from changes in NMR spectra upon the addition of corresponding salts. In spite of the low ability of the thioethers to form stable Langmuir monolayers on deionized water, one might argue that the monolayers significantly expand in the presence of Hg salts in the water subphase. Hg2+ ion uptake by the Langmuir-Blodgett (LB) films of ligand L3 was proved by X-ray photoelectron spectroscopy (XPS). Together, these results demonstrate the potential of sulfide groups on the calixarene platform as receptor unit towards Hg2+ ions, which could be useful in the development of Hg2+-selective water purification systems or thin-film sensor devices.

A Novel Family of Cage-like (CuLi, CuNa, CuK)-phenylsilsesquioxane Complexes with 8-Hydroxyquinoline Ligands: Synthesis, Structure, and Catalytic Activity.

The first examples of metallasilsesquioxane complexes, including ligands of the 8-hydroxyquinoline family 1-9, were synthesized, and their structures were established by single crystal X-ray diffraction using synchrotron radiation. Compounds 1-9 tend to form a type of sandwich-like cage of Cu4M2 nuclearity (M = Li, Na, K). Each complex includes two cisoid pentameric silsesquioxane ligands and two 8-hydroxyquinoline ligands. The latter coordinates the copper ions and corresponding alkaline metal ions (via the deprotonated oxygen site). A characteristic (size) of the alkaline metal ion and a variation of characteristics of nitrogen ligands (8-hydroxyquinoline vs. 5-chloro-8-hydroxyquinoline vs. 5,7-dibromo-8-hydroxyquinoline vs. 5,7-diiodo-8-hydroxyquinoline) are highly influential for the formation of the supramolecular structure of the complexes 3a, 5, and 7-9. The Cu6Na2-based compound 2 exhibits high catalytic activity towards the oxidation of (i) hydrocarbons by H2O2 activated with HNO3, and (ii) alcohols by tert-butyl hydroperoxide. Studies of kinetics and their selectivity has led us to conclude that it is the hydroxyl radicals that play a crucial role in this process.

Visualization of catalyst dynamics and development of a practical procedure to study complex "cocktail"-type catalytic systems.

The ability to distinguish molecular catalysis from nanoscale catalysis provides a key to success in the field of catalyst development, particularly for the transition to sustainable economies. Complex evolution of catalyst precursors, facilitated by dynamic interconversions and leaching, makes the identification of catalytically active forms an important task, which is sometimes very difficult. We propose a simple method for in situ capturing of nanoparticles with carbon-coated grids directly from reaction mixtures. Application of this method to the Mizoroki-Heck reaction allowed visualization of dynamic changes of the dominant form of palladium particles in the reaction mixtures with homogeneous and heterogeneous catalyst precursors. Changes in the size and shape of the palladium particles reflecting the progress of the catalytic chemical reaction were demonstrated. Detailed computational modeling was carried out to confirm the generality of this approach and its feasibility for different catalytic systems. The computational models revealed strong binding of metal particles to the carbon coating comprising efficient binding sites. The approach was tested for trapping Cr, Co, Ag, Ni, Cu, Pd, Cd, Ir, Ru and Rh nanoparticles from solutions containing micromolar starting concentrations of the metal precursors. The developed approach provides a unique tool for studying intrinsic properties of catalytic systems.

Peculiar Spin-Crossover Behavior in the 2D Polymer K[FeIII(5Cl-thsa)2].

A potassium salt of the N2S2O2-coordination Fe(III) anion K[Fe(5Cl-thsa)2] (1) (5Cl-thsa - 5-chlorosalicylaldehyde thiosemicarbazone) is synthesized and characterized structurally and magnetically over a wide temperature range. Two polymorphs of salt 1 characterized by the common 2D polymer nature and assigned to the same orthorhombic Pbcn space group have been identified. The molecular structure of the minor polymorph of 1 was solved and refined at 100, 250, and 300 K is shown to correspond to the LS configuration. The dominant polymorph of 1 features K+ cations disordered over a few crystallographic sites, while the minor polymorph includes fully ordered K+ cations. The major polymorph exhibits a complete three-step cooperative spin-crossover transition both in the heating and cooling modes: The first step occurs in a temperature range from 2 to 50 K; the second abrupt hysteretic step occurs from 200 to 250 K with T1/2 = 230 K and a 6 K hysteresis loop. The third gradual step occurs from 250 to 440 K. According to 57Fe Mössbauer, XRPD, and EXAFS data, the spin-crossover transition for the dominant polymorph is quite peculiar. Indeed, the increase in the HS concentration by 57% at the second step does not result in the expected significant increase in the iron(III)-ligand bond lengths. In addition, the final step of the spin conversion (ΔγHS = 26%) is associated with a structural phase transition with a symmetry lowering from the orthorhombic (Pbcn) to the monoclinic (P21/n) space group. This nontrivial phenomenon was investigated in detail by applying magnetization measurements, electron spin resonance, 57Fe Mössbauer spectroscopy, and DFT calculations. These results provide a new platform for understanding the multistep spin-crossover character in the Fe(III) thsa-complexes and related compounds.

Cu6- and Cu8-Cage Sil- and Germsesquioxanes: Synthetic and Structural Features, Oxidative Rearrangements, and Catalytic Activity.

This study reports intriguing features in the self-assembly of cage copper(II) silsesquioxanes in the presence of air. Despite the wide variation of solvates used, a series of prismatic hexanuclear Cu6 cages (1-5) were assembled under mild conditions. In turn, syntheses at higher temperatures are accompanied by side reactions, leading to the oxidation of solvates (methanol, 1-butanol, and tetrahydrofuran). The oxidized solvent derivatives then specifically participate in the formation of copper silsesquioxane cages, allowing the isolation of several unusual Cu8-based (6 and 7) and Cu6-based (8) complexes. When 1,4-dioxane was applied as a reaction medium, deep rearrangements occurred (with a total elimination of silsesquioxane ligands), causing the formation of mononuclear copper(II) compounds bearing oxidized dioxane fragments (9 and 11) or a formate-driven 1D coordination polymer (10). Finally, a "directed" self-assembly of sil- and germsesquioxanes from copper acetate (or formate) resulted in the corresponding acetate (or formate) containing Cu6 cages (12 and 13) that were isolated in high yields. The structures of all of the products 1-13 were established by single-crystal X-ray diffraction, mainly based on the use of synchrotron radiation. Moreover, the catalytic activity of compounds 12 and 13 was evaluated toward the mild homogeneous oxidation of C5-C8 cycloalkanes with hydrogen peroxide to form a mixture of the corresponding cyclic alcohols and ketones.

Unsymmetrical Trifluoromethyl Methoxyphenyl ß-Diketones: Effect of the Position of Methoxy Group and Coordination at Cu(II) on Biological Activity.

Copper(II) complexes with 1,1,1-trifluoro-4-(4-methoxyphenyl)butan-2,4-dione (HL1) were synthesized and characterized by elemental analysis, FT-IR spectroscopy, and single crystal X-ray diffraction. The biological properties of HL1 and cis-[Cu(L1)2(DMSO)] (3) were examined against Gram-positive and Gram-negative bacteria and opportunistic unicellular fungi. The cytotoxicity was estimated towards the HeLa and Vero cell lines. Complex 3 demonstrated antibacterial activity towards S. aureus comparable to that of streptomycin, lower antifungal activity than the ligand HL1 and moderate cytotoxicity. The bioactivity was compared with the activity of compounds of similar structures. The effect of changing the position of the methoxy group at the aromatic ring in the ligand moiety of the complexes on their antimicrobial and cytotoxic activity was explored. We propose that complex 3 has lower bioavailability and reduced bioactivity than expected due to strong intermolecular contacts. In addition, molecular docking studies provided theoretical information on the interactions of tested compounds with ribonucleotide reductase subunit R2, as well as the chaperones Hsp70 and Hsp90, which are important biomolecular targets for antitumor and antimicrobial drug search and design. The obtained results revealed that the complexes displayed enhanced affinity over organic ligands. Taken together, the copper(II) complexes with the trifluoromethyl methoxyphenyl-substituted ß-diketones could be considered as promising anticancer agents with antibacterial properties.

Speciation of Zn and Cu in Technosol and evaluation of a sequential extraction procedure using XAS, XRD and SEM-EDX analyses.

Metal speciation, linked directly to bioaccessibility and lability, is a key to be considered when assessing associated human and environmental health risks originated from anthropogenic activities. To identify the Zn and Cu speciation in the highly contaminated, technogenically transformed soils (Technosol) from the impact zone near the industrial sludge reservoirs of chemical plant (Siverskyi Donets River floodplain, southern Russia), the validity of the BCR sequential extraction procedure using the X-ray absorption fine-structure and X-ray powder diffraction (XRD) analyses was examined after each of the three stages. After the removal of exchange and carbonate-bonded Zn and Cu compounds from Technosol (first stage of extraction), the resulting residual soil showed enrichment in a great diversity of metal compounds, primarily with Me-S and Me-O bonds. The number of compounds with a higher solubility decreased at the subsequent stages of extraction. In the residual soil left over after extracting the first and second fractions, the dominant Zn-S bond appeared as würtzite (hexagonal ZnS) that made up more than 50%, while the Cu-S bond was almost completely represented only by chalcocite (Cu2S). The XRD analysis revealed the authigenic minerals of metals with S: sphalerite (cubic ZnS), würtzite (hexagonal ZnS), covellite (CuS) and bornite (Cu5FeS4). The scanning electron microscopy data confirmed that würtzite was the dominant form of Me with sulfur-containing and carbonate-containing minerals. The Zn-S bond was the main component (57%), whereas the Cu-O bond was dominant in the residual fraction (the fraction after the third-stage extraction). The results revealed that the composition of the residual fractions might include some of the most stable and hard-to-recover metal compounds of technogenic origin. Thus, the application of the novel instrumental methods, coupled with the chemical fractionation, revealed the incomplete selectivity of the extractants in the extraction of Zn and Cu in long-term highly contaminated soils.

Coordination Affinity of Cu(II)-Based Silsesquioxanes toward N,N-Ligands and Associated Skeletal Rearrangements: Cage and Ionic Products Exhibiting a High Catalytic Activity in Oxidation Reactions.

An unusual skeletal rearrangement of piperazine into ethylenediamine has been observed for the first time as a result of an attempt to synthesize a piperazine-linked metal-organic framework (MOF) using cage Cu(II),Na-phenylsilsequixane as a potential building block. Instead of the expected "metallasilsesquioxane-based MOF", a Cu6 complex 1 coordinated both by silsesquioxane and ethylenediamine ligands was isolated. An effort to reproduce this result via direct interaction of Cu-phenylsilsequioxane and ethylenediamine surprisingly afforded two other types of complexes, copper-sodium 2 and copper 3 ionic products. Cationic components in both products 2 and 3 are represented by (i) copper and sodium ions (in the case of 2) or (ii) copper ions exclusively (in the case of 3) coordinated by ethylenediamine ligands. Both complexes 2 and 3 include Si6-based condensed silsesquioxane fragments serving as anionic components of the products. Symptomatically, the types of the Si6-frameworks in 2 and 3 are drastically different. More specifically, the Si6 unit in 2 is an unprecedented distorted silsesquioxane skeleton consisting of two condensed tetramembered rings. Structural features of compounds 1-3 were established by single crystal X-ray diffraction. Compound 2 was found to catalyze the oxidation of cyclohexane to cyclohexanol and cyclohexanone with H2O2 (a mixture of these products was obtained after adding PPh3 to the reaction solution) as well as the transformation of cyclohexanol to cyclohexanone under the action of tert-butyl hydroperoxide.

Solvent-Induced Encapsulation of Cobalt(II) Ion by a Boron-Capped tris-Pyrazoloximate.

Boron-cross-linked cobalt(II) pseudoclathrochelate was obtained by the template reaction of 2-acetylpyrazoloxime, phenylboronic acid, and a new DMF cobalt(II) solvato complex with a decachloro-closo-decaborate dianion. As confirmed by single-crystal X-ray diffraction, this complex crystallizes with two symmetry-independent cobalt(II) pseudoclathrochelate cations, one decachloro-closo-decaborate dianion, one benzene, one dichloromethane solvent molecule, and two molecules of DMF. The latter act as pseudocapping fragments to the monocapped tris-pyrazoloximate ligands by forming N-H···O hydrogen bonds with their pyrazole groups. The CoIIN6-coordination polyhedra adopt a nearly ideal TP geometry with distortion angles φ equal to 1.22(16) and 2.58(17)° for two symmetry-independent pseudoclathrochelate cations, both containing the encapsulated cobalt(II) ion in its high-spin state (Co-N 2.115(4)-2.198(3) Å). Magnetic properties of this complex were studied both by dc-magnetometry and by solution-state NMR spectroscopy to reveal a high magnetic anisotropy, thus suggesting a large magnetic susceptibility tensor anisotropy (25.8 × 10-32 m3 at 298 K) and a large negative zero-field splitting energy (-85 cm-1). The results of magnetometry studies in the ac magnetic field suggest a single molecule magnet behavior of this TP complex with an effective magnetization reversal barrier of approximately 130 cm-1. Its pseudocapping DMF molecules that form H-bonds with tris-pyrazoloximate fragments are easy to substitute by strong H-bond acceptors, such as chloride ions and di- and tetramethylureas, thus affecting the magnetic properties of a whole pseudomacrobicyclic paramagnetic system.

Mechanism of Zr Incorporation in the Course of Hydrothermal Synthesis of Zeolite BEA.

The mechanism of Zr-BEA hydrothermal synthesis in fluoride media has been investigated through the detailed characterization of samples obtained at different synthesis times by XRD, XRF, TGA, multinuclear solid-state NMR, FTIR, SEM, TEM with EDS, XAS, and nitrogen sorption. The synthetic procedure involved hydrothermal crystallization of the gel with the following composition: 1SiO2:0.54TEAOH:0.54HF:0.005ZrO2:5.6H2O. The formation of open and closed Lewis acid sites was monitored by FTIR spectroscopy of adsorbed CO, while coordination of Zr was studied by XAS. The results show that the formation of Zr-BEA proceeds by two steps. In the first step, pure silica BEA is crystallized via a solid-solid hydrogel rearrangement mechanism. Zirconium species are occluded in Si-BEA crystals in the form of Zr-rich silicate particles. These particles do not provide for any appreciable Lewis acidity. In the second step, Zr incorporation into T positions of the zeolite structure takes place, leading to the formation of closed Zr sites, which are partially converted into open sites at longer synthesis times. It is demonstrated that the content of open and closed sites can be tuned by variation of the synthesis time.

Heterometallic Palladium(II)-Indium(III) and -Gallium(III) Acetate-Bridged Complexes: Synthesis, Structure, and Catalytic Performance in Homogeneous Alkyne and Alkene Hydrogenation.

The reaction of Pd3(OOCMe)6 with indium(III) and gallium(III) acetates was studied to prepare new PdII-based heterometallic carboxylate complexes with group 13 metals. The heterometallic palladium(II)-indium(III) acetate-bridged complexes Pd(OOCMe)4In(OOCMe) (1) and Pd(OOCMe)4In(OOCMe)·MeCOOH (1a) were synthesized and structurally characterized with X-ray crystallography and extended X-ray absorption fine structure in the solid state and solution. A similar Pd-Ga heterometallic complex formed by the reaction of Pd3(OOCMe)6 with gallium(III) acetate in a dilute acetic acid solution, as evidenced by atmospheric pressure chemical ionization mass and UV-vis spectrometry, was unstable at higher concentrations and in the solid state. Complex 1 catalyzes the liquid-phase-selective phenylacetylene and styrene hydrogenation (1 atm of H2 at 20 °C) in acetic acid, ethyl acetate, and N, N-dimethylformamide solutions, while no Pd metal was formed until alkyne and alkene hydrogenation ceased.

Heptanuclear Fe5Cu2-Phenylgermsesquioxane containing 2,2'-Bipyridine: Synthesis, Structure, and Catalytic Activity in Oxidation of C-H Compounds.

A new representative of an unusual family of metallagermaniumsesquioxanes, namely the heterometallic cagelike phenylgermsesquioxane (PhGeO2)12Cu2Fe5(O)OH(PhGe)2O5(bipy)2 (2), was synthesized and structurally characterized. Fe(III) ions of the complex are coordinated by oxa ligands: (i) cyclic (PhGeO2)12 and acyclic (Ph2Ge2O5) germoxanolates and (ii) O2- and (iii) HO- moieties. In turn, Cu(II) ions are coordinated by both oxa (germoxanolates) and aza ligands (2,2'-bipyridines). This "hetero-type" of ligation gives in sum an attractive pagoda-like molecular architecture of the complex 2. Product 2 showed a high catalytic activity in the oxidation of alkanes to the corresponding alkyl hydroperoxides (in yields up to 30%) and alcohols (in yields up to 100%) and in the oxidative formation of benzamides from alcohols (catalyst loading down to 0.4 mol % in Cu/Fe).

Hypervalent iodine compounds for anti-Markovnikov-type iodo-oxyimidation of vinylarenes.

The iodo-oxyimidation of styrenes with the N-hydroxyimide/I2/hypervalent iodine oxidant system was proposed. Among the examined hypervalent iodine oxidants (PIDA, PIFA, IBX, DMP) PhI(OAc)2 proved to be the most effective; yields of iodo-oxyimides are 34-91%. A plausible reaction pathway includes the addition of an imide-N-oxyl radical to the double C=C bond and trapping of the resultant benzylic radical by iodine. It was shown that the iodine atom in the prepared iodo-oxyimides can be substituted by various nucleophiles.

Solid-State Reactions of Eicosaborate [B20 H18 ]2- Salts and Complexes.

A series of salts and complexes containing trans- and iso-isomers of octadecahydro-eicosaborate [B20 H18 ]2- dianion is synthesized and characterized using FTIR and 11 B NMR spectroscopies and X-ray diffraction techniques. Both isomers are found to act as four-, bi-, or zero-dentate ligands in reactions with copper(II), silver(I), and lead(II) through apical and/or equatorial boron atoms. Solid-state photo- and thermoinitiated reactions of octadecahydro-eicosaborate isomerization and solvent cleavage occurring in these compounds in a single-crystal-to-single-crystal manner are studied in situ. In contrast with solutions, in solids the reaction of boron cluster transformation occurs rarely, thus, analysis of crystal packing allowed us to suggest some criteria of isomerization of macropolyhedral boranes in crystals. X-ray diffraction data are used to confirm reaction path of isomerization of the [B20 H18 ]2- dianion.

Cobalt-Based Single-Ion Magnets on an Apatite Lattice: Toward Patterned Arrays for Magnetic Memories.

Single-ion magnets (SIMs) that can maintain magnetization direction on an individual transition metal atom represent the smallest atomic-scale units for future magnetic data storage devices and molecular electronics. Here we present a robust extended inorganic solid hosting efficient SIM centers, as an alternative to molecular SIM crystals. We show that unique dioxocobaltate(II) ions, confined in the channels of strontium hydroxyapatite, exhibit classical SIM features with a large energy barrier for magnetization reversal (Ueff) of 51-59 cm-1. The samples have been tuned such that a magnetization hysteresis opens below 8 K and Ueff increases by a factor of 4 and can be further enhanced to the highest values among 3d metal complexes of 275 cm-1 when Ba is substituted for Sr. The SIM properties are preserved without any tendency toward spin ordering up to a high Co concentration. At a maximal Co content, a hypothetical regular hexagonal grid of SIMs with a 1 nm interspacing on the (001) crystal facet would allow a maximal magnetic recording density of 105 Gb/cm2.

Si10Cu6N4 Cage Hexacoppersilsesquioxanes Containing N Ligands: Synthesis, Structure, and High Catalytic Activity in Peroxide Oxidations.

The synthesis, composition, and catalytic properties of a new family of hexanuclear Cu(II)-based phenylsilsesquioxanes are described here. Structural studies of 17 synthesized compounds revealed the general principle underlying their molecular topology: viz., a central metal oxide layer consisting of two Cu3 trimers is coordinated by two cyclic [PhSiO1.5]5 siloxanolate ligands to form a skewed sandwich architecture with the composition [(PhSiO1.5)10(CuO)6]2+. In addition to this O ligation by the siloxanolate rings, two opposite copper ions are additionally coordinated by the nitrogen atoms of corresponding N ligand(s), such as 2,2'-bipyridine (compounds 1-9), 1,10-phenanthroline (compounds 10-13), mixed 1,10-phenanthroline/2,2'-bipyridine (compound 14), or bathophenanthroline (compounds 15-17). Finally, the charge balance is maintained by two HO- (compounds 1-7, 10-13, and 15-17), two H3CO- (compound 8), or two CH3COO- (compounds 9 and 14) anions. Complexes 1 and 10 exhibited a high activity in the oxidative amidation oxidation of alcohols. Compounds 1, 10, and 15 are very efficient homogeneous catalysts in the oxidation of alkanes and alcohols with peroxides.

"Isolated" DyO+ Embedded in a Ceramic Apatite Matrix Featuring Single-Molecule Magnet Behavior with a High Energy Barrier for Magnetization Relaxation.

Meeting the challenges of Moore's Law, predicting ambitious miniaturization rates of integrated circuits, requires to go beyond the traditional top-down approaches, and to employ synthetic chemistry methods, to use bottom-up techniques. During the recent decades, it has been shown that open-shell coordination compounds may exhibit intramolecular spontaneous magnetization, thus offering promising prospects for storage and processing of digital information. Against this background we regarded it rewarding to implement similar magnetic centers into a ceramic material, which would provide better long-term mechanical and chemical durability. Here we present new robust inorganic compounds containing separate DyO+ ions in an apatite matrix, which behave like single-molecule magnets. The materials exhibit a blocking temperature of 11 K and an energy barrier for spin reversal of a thousand inverse centimeters which is among the highest values ever achieved.

Identification of Subnanometric Ag Species, Their Interaction with Supports and Role in Catalytic CO Oxidation.

The nature and size of the real active species of nanoparticulated metal supported catalysts is still an unresolved question. The technique of choice to measure particle sizes at the nanoscale, HRTEM, has a practical limit of 1 nm. This work is aimed to identify the catalytic role of subnanometer species and methods to detect and characterize them. In this frame, we investigated the sensitivity to redox pretreatments of Ag/Fe/TiO2, Ag/Mg/TiO2 and Ag/Ce/TiO2 catalysts in CO oxidation. The joint application of HRTEM, SR-XRD, DRS, XPS, EXAFS and XANES methods indicated that most of the silver in all samples is in the form of Ag species with size <1 nm. The differences in catalytic properties and sensitivity to pretreatments, observed for the studied Ag catalysts, could not be explained taking into account only the Ag particles whose size distribution is measured by HRTEM, but may be explained by the presence of the subnanometer Ag species, undetectable by HRTEM, and their interaction with supports. This result highlights their role as active species and the need to take them into account to understand integrally the catalysis by supported nanometals.