A Synthetic Protocell-Based Heparin Scavenger.

Heparin is a commonly applied blood anticoagulant agent in clinical use. After treatment, excess heparin needs to be removed to circumvent side effects and recover the blood-clotting cascade. Most existing heparin antidotes rely on direct heparin binding and complexation, yet selective compartmentalization and sequestration of heparin would be beneficial for safety and efficiency. However, such systems have remained elusive. Herein, a semipermeable protein-based microcompartment (proteinosome) is loaded with a highly positively charged chitosan derivative, which can induce electrostatics-driven internalization of anionic guest molecules inside the compartment. Chitosan-loaded proteinosomes are subsequently employed to capture heparin, and an excellent heparin-scavenging performance is demonstrated under physiologically relevant conditions. Both the highly positive scavenger and the polyelectrolyte complex are confined and shielded by the protein compartment in a time-dependent manner. Moreover, selective heparin-scavenging behavior over serum albumin is realized through adjusting the localized scavenger or surrounding salt concentrations at application-relevant circumstances. In vitro studies reveal that the cytotoxicity of the cationic scavenger and the produced polyelectrolyte complex is reduced by protocell shielding. Therefore, the proteinosome-based systems may present a novel polyelectrolyte-scavenging method for biomedical applications.

Orthogonal Light-Dependent Membrane Adhesion Induces Social Self-Sorting and Member-Specific DNA Communication in Synthetic Cell Communities.

Developing orthogonal chemical communication pathways in diverse synthetic cell communities is a considerable challenge due to the increased crosstalk and interference associated with large numbers of different types of sender-receiver pairs. Herein, the authors control which sender-receiver pairs communicate in a three-membered community of synthetic cells through red and blue light illumination. Semipermeable protein-polymer-based synthetic cells (proteinosomes) with complementary membrane-attached protein adhesion communicate through single-stranded DNA oligomers and synergistically process biochemical information within a community consisting of one sender and two different receiver populations. Different pairs of red and blue light-responsive protein-protein interactions act as membrane adhesion mediators between the sender and receivers such that they self-assemble and socially self-sort into different multicellular structures under red and blue light. Consequently, distinct sender-receiver pairs come into the signaling range depending on the light illumination and are able to communicate specifically without activation of the other receiver population. Overall, this work shows how photoswitchable membrane adhesion gives rise to different self-sorting protocell patterns that mediate member-specific DNA-based communication in ternary populations of synthetic cells and provides a step towards the design of orthogonal chemical communication networks in diverse communities of synthetic cells.

Protocellular CRISPR/Cas-Based Diffusive Communication Using Transcriptional RNA Signaling.

Protocells containing enzyme-driven biomolecular circuits that can process and exchange information offer a promising approach for mimicking cellular features and developing molecular information platforms. Here, we employ synthetic transcriptional circuits together with CRISPR/Cas-based DNA processing inside semipermeable protein-polymer microcompartments. We first establish a transcriptional protocell that can be activated by external DNA strands and produce functional RNA aptamers. Subsequently, we engineer a transcriptional module to generate RNA strands functioning as diffusive signals that can be sensed by neighboring protocells and trigger the activation of internalized DNA probes or localization of Cas nucleases. Our results highlight the opportunities to combine CRISPR/Cas machinery and DNA nanotechnology for protocellular communication and provide a step towards the development of protocells capable of distributed molecular information processing.

Determinants of Ligand-Functionalized DNA Nanostructure-Cell Interactions.

Synthesis of ligand-functionalized nanomaterials with control over size, shape, and ligand orientation facilitates the design of targeted nanomedicines for therapeutic purposes. DNA nanotechnology has emerged as a powerful tool to rationally construct two- and three-dimensional nanostructures, enabling site-specific incorporation of protein ligands with control over stoichiometry and orientation. To efficiently target cell surface receptors, exploration of the parameters that modulate cellular accessibility of these nanostructures is essential. In this study, we systematically investigate tunable design parameters of antibody-functionalized DNA nanostructures binding to therapeutically relevant receptors, including the programmed cell death protein 1, the epidermal growth factor receptor, and the human epidermal growth factor receptor 2. We show that, although the native affinity of antibody-functionalized DNA nanostructures remains unaltered, the absolute number of bound surface receptors is lower compared to soluble antibodies due to receptor accessibility by the nanostructure. We explore structural determinants of this phenomenon to improve efficiency, revealing that receptor binding is mainly governed by nanostructure size and DNA handle location. The obtained results provide key insights in the ability of ligand-functionalized DNA nanostructures to bind surface receptors and yields design rules for optimal cellular targeting.

Dynamic Protease Activation on a Multimeric Synthetic Protein Scaffold via Adaptable DNA-Based Recruitment Domains.

Hexameric hemoprotein (HTHP) is employed as a scaffold protein for the supramolecular assembly and activation of the apoptotic signalling enzyme caspase-9, using short DNA elements as modular recruitment domains. Caspase-9 assembly and activation on the HTHP platform due to enhanced proximity is followed by combinatorial inhibition at high scaffold concentrations. The DNA recruitment domains allow for reversible switching of the caspase-9 assembly and activity state using short modulatory DNA strands. Tuning of the recruitment domain affinity allows for generating kinetically trapped active enzyme complexes, as well as for dynamic repositioning of caspases over scaffold populations and inhibition using monovalent sink platforms. The conceptual combination of a highly structured multivalent protein platform with modular DNA recruitment domains provides emergent biomimicry properties with advanced levels of control over protein assembly.

Assembly of Dynamic Supramolecular Polymers on a DNA Origami Platform.

Biological processes rely on transient interactions that govern assembly of biomolecules into higher order, multi-component systems. A synthetic platform for the dynamic assembly of multicomponent complexes would provide novel entries to study and modulate the assembly of artificial systems into higher order topologies. Here, we establish a hybrid DNA origami-based approach as an assembly platform that enables dynamic templating of supramolecular architectures. It entails the site-selective recruitment of supramolecular polymers to the platform with preservation of the intrinsic dynamics and reversibility of the assembly process. The composition of the supramolecular assembly on the platform can be tuned dynamically, allowing for monomer rearrangement and inclusion of molecular cargo. This work should aid the study of supramolecular structures in their native environment in real-time and incites new strategies for controlled multicomponent self-assembly of synthetic building blocks.

Model-driven engineering of supramolecular buffering by multivalency.

A supramolecular system in which the concentration of a molecule is buffered over several orders of magnitude is presented. Molecular buffering is achieved as a result of competition in a ring-chain equilibrium of multivalent ureidopyrimidinone monomers and a monovalent naphthyridine molecule which acts as an end-capper. While we previously only considered divalent ureidopyrimidinone monomers we now present a model-driven engineering approach to improve molecular buffering using multivalent ring-chain systems. Our theoretical models reveal an odd-even effect where even-valent molecules show superior buffering capabilities. Furthermore, we predict that supramolecular buffering can be significantly improved using a tetravalent instead of a divalent molecule, since the tetravalent molecule can form two intramolecular rings with different "stabilities" due to statistical effects. Our model predictions are validated against experimental 1H NMR data, demonstrating that model-driven engineering has considerable potential in supramolecular chemistry.

Designed Asymmetric Protein Assembly on a Symmetric Scaffold.

Cellular signaling is regulated by the assembly of proteins into higher-order complexes. Bottom-up creation of synthetic protein assemblies, especially asymmetric complexes, is highly challenging. Presented here is the design and implementation of asymmetric assembly of a ternary protein complex facilitated by Rosetta modeling and thermodynamic analysis. The wild-type symmetric CT32-CT32 interface of the 14-3-3-CT32 complex was targeted, ultimately favoring asymmetric assembly on the 14-3-3 scaffold. Biochemical studies, supported by mass-balance models, allowed characterization of the parameters driving asymmetric assembly. Importantly, our work reveals that both the individual binding affinities and cooperativity between the assembling components are crucial when designing higher-order protein complexes. Enzyme complementation on the 14-3-3 scaffold highlighted that interface engineering of a symmetric ternary complex generates asymmetric protein complexes with new functions.

Efficient Small-Scale Conjugation of DNA to Primary Antibodies for Multiplexed Cellular Targeting.

The combination of the specificity of antibodies and the programmability of DNA nanotechnology has provided the scientific community with a powerful tool to label and unambiguously distinguish a large number of subcellular targets using fluorescence-based read-out methods. Whereas primary antibodies are commercially available for a large class of targets, a general stoichiometric site-selective DNA labeling strategy for this affinity reagent is lacking. Here we present a universal, site-selective conjugation method using a small photo-cross-linkable protein G adaptor that allows labeling of antibodies of different host species with a controlled number of short oligonucleotides (ODNs). Importantly, we illustrate that this conjugation method can be directly performed on commercially available primary antibodies on a small scale and without cross-reactivity towards bovine serum albumin. In addition, we present a general benchtop-compatible strategy to purify DNA-labeled antibodies without a loss of function. The application of protein G-ODN-labeled primary antibodies is demonstrated by employing three well-known methods for detecting subcellular targets using fluorescence read-out, including flow cytometry, DNA-PAINT, and dSTORM. This work thus establishes a general and efficient platform for the synthesis of a library of unique ODN-antibody conjugates, facilitating the broader use of DNA-based programmable tags for multiplexed labeling to identify subcellular features with nanometer precision and improving our understanding of cellular structure and function.

Pathway Control in Cooperative vs. Anti-Cooperative Supramolecular Polymers.

Controlling the nanoscale morphology in assemblies of π-conjugated molecules is key to developing supramolecular functional materials. Here, we report an unsymmetrically substituted amphiphilic PtII complex 1 that shows unique self-assembly behavior in nonpolar media, providing two competing anti-cooperative and cooperative pathways with distinct molecular arrangement (long- vs. medium-slipped, respectively) and nanoscale morphology (discs vs. fibers, respectively). With a thermodynamic model, we unravel the competition between the anti-cooperative and cooperative pathways: buffering of monomers into small-sized, anti-cooperative species affects the formation of elongated assemblies, which might open up new strategies for pathway control in self-assembly. Our findings reveal that side-chain immiscibility is an efficient method to control anti-cooperative assemblies and pathway complexity in general.

Affinity Maturation of a Cyclic Peptide Handle for Therapeutic Antibodies Using Deep Mutational Scanning.

Meditopes are cyclic peptides that bind in a specific pocket in the antigen-binding fragment of a therapeutic antibody such as cetuximab. Provided their moderate affinity can be enhanced, meditope peptides could be used as specific non-covalent and paratope-independent handles in targeted drug delivery, molecular imaging, and therapeutic drug monitoring. Here we show that the affinity of a recently reported meditope for cetuximab can be substantially enhanced using a combination of yeast display and deep mutational scanning. Deep sequencing was used to construct a fitness landscape of this protein-peptide interaction, and four mutations were identified that together improved the affinity for cetuximab 10-fold to 15 nm Importantly, the increased affinity translated into enhanced cetuximab-mediated recruitment to EGF receptor-overexpressing cancer cells. Although in silico Rosetta simulations correctly identified positions that were tolerant to mutation, modeling did not accurately predict the affinity-enhancing mutations. The experimental approach reported here should be generally applicable and could be used to develop meditope peptides with low nanomolar affinity for other therapeutic antibodies.

DNA-Based Nanodevices Controlled by Purely Entropic Linker Domains.

We demonstrate here the rational design of purely entropic domains as a versatile approach to achieve control of the input/output response of synthetic molecular receptors. To do so and to highlight the versatility and generality of this approach, we have rationally re-engineered two model DNA-based receptors: a clamp-like DNA-based switch that recognizes a specific DNA sequence and an ATP-binding aptamer. We show that, by varying the length of the linker domain that connects the two recognition portions of these receptors, it is possible to finely control their affinity for their specific ligand. Through mathematical modeling and thermodynamic characterization, we also demonstrate for both systems that entropy changes associated with changes in linker length are responsible for affinity modulation and that the linker we have designed behaves as a disordered random-coil polymer. The approach also allows us to regulate the ligand concentration range at which the receptors respond and show optimal specificity. Given these attributes, the use of purely entropic domains appears as a versatile and general approach to finely control the activity of synthetic receptors in a highly predictable and controlled fashion.

Pathway complexity in supramolecular polymerization.

Self-assembly provides an attractive route to functional organic materials, with properties and hence performance depending sensitively on the organization of the molecular building blocks. Molecular organization is a direct consequence of the pathways involved in the supramolecular assembly process, which is more amenable to detailed study when using one-dimensional systems. In the case of protein fibrils, formation and growth have been attributed to complex aggregation pathways that go beyond traditional concepts of homogeneous and secondary nucleation events. The self-assembly of synthetic supramolecular polymers has also been studied and even modulated, but our quantitative understanding of the processes involved remains limited. Here we report time-resolved observations of the formation of supramolecular polymers from π-conjugated oligomers. Our kinetic experiments show the presence of a kinetically favoured metastable assembly that forms quickly but then transforms into the thermodynamically favoured form. Quantitative insight into the kinetic experiments was obtained from kinetic model calculations, which revealed two parallel and competing pathways leading to assemblies with opposite helicity. These insights prompt us to use a chiral tartaric acid as an auxiliary to change the thermodynamic preference of the assembly process. We find that we can force aggregation completely down the kinetically favoured pathway so that, on removal of the auxiliary, we obtain only metastable assemblies.

Non-equilibrium supramolecular polymerization.

Supramolecular polymerization has been traditionally focused on the thermodynamic equilibrium state, where one-dimensional assemblies reside at the global minimum of the Gibbs free energy. The pathway and rate to reach the equilibrium state are irrelevant, and the resulting assemblies remain unchanged over time. In the past decade, the focus has shifted to kinetically trapped (non-dissipative non-equilibrium) structures that heavily depend on the method of preparation (i.e., pathway complexity), and where the assembly rates are of key importance. Kinetic models have greatly improved our understanding of competing pathways, and shown how to steer supramolecular polymerization in the desired direction (i.e., pathway selection). The most recent innovation in the field relies on energy or mass input that is dissipated to keep the system away from the thermodynamic equilibrium (or from other non-dissipative states). This tutorial review aims to provide the reader with a set of tools to identify different types of self-assembled states that have been explored so far. In particular, we aim to clarify the often unclear use of the term "non-equilibrium self-assembly" by subdividing systems into dissipative, and non-dissipative non-equilibrium states. Examples are given for each of the states, with a focus on non-dissipative non-equilibrium states found in one-dimensional supramolecular polymerization.

Small-Molecule-Induced and Cooperative Enzyme Assembly on a 14-3-3 Scaffold.

Scaffold proteins regulate cell signalling by promoting the proximity of putative interaction partners. Although they are frequently applied in cellular settings, fundamental understanding of them in terms of, amongst other factors, quantitative parameters has been lagging behind. Here we present a scaffold protein platform that is based on the native 14-3-3 dimeric protein and is controllable through the action of a small-molecule compound, thus permitting study in an in vitro setting and mathematical description. Robust small-molecule regulation of caspase-9 activity through induced dimerisation on the 14-3-3 scaffold was demonstrated. The individual parameters of this system were precisely determined and used to develop a mathematical model of the scaffolding concept. This model was used to elucidate the strong cooperativity of the enzyme activation mediated by the 14-3-3 scaffold. This work provides an entry point for the long-needed quantitative insights into scaffold protein functioning and paves the way for the optimal use of reengineered 14-3-3 proteins as chemically inducible scaffolds in synthetic systems.

Regulating Competing Supramolecular Interactions Using Ligand Concentration.

The complexity of biomolecular systems inevitably leads to a degree of competition between the noncovalent interactions involved. However, the outcome of biological processes is generally very well-defined often due to the competition of these interactions. In contrast, specificity in synthetic supramolecular systems is usually based on the presence of a minimum set of alternative assembly pathways. While the latter might simplify the system, it prevents the selection of specific structures and thereby limits the adaptivity of the system. Therefore, artificial systems containing competing interactions are vital to stimulate the development of more adaptive and lifelike synthetic systems. Here, we present a detailed study on the self-assembly behavior of a C2v-symmetrical tritopic molecule, functionalized with three self-complementary ureidopyrimidinone (UPy) motifs. Due to a shorter linker connecting one of these UPys, two types of cycles with different stabilities can be formed, which subsequently dimerize intermolecularly via the third UPy. The UPy complementary 2,7-diamido-1,8-naphthyridine (NaPy) motif was gradually added to this mixture in order to examine its effect on the cycle distribution. As a result of the C2v-symmetry of the tritopic UPy, together with small differences in binding strength, the cycle ratio can be regulated by altering the concentration of NaPy. We show that this ratio can be increased to an extent where one type of cycle is formed almost exclusively.

Modulating the Nucleated Self-Assembly of Tri-ß(3) -Peptides Using Cucurbit[n]urils.

The modulation of the hierarchical nucleated self-assembly of tri-ß(3) -peptides has been studied. ß(3) -Tyrosine provided a handle to control the assembly process through host-guest interactions with CB[7] and CB[8]. By varying the cavity size from CB[7] to CB[8] distinct phases of assembling tri-ß(3) -peptides were arrested. Given the limited size of the CB[7] cavity, only one aromatic ß(3) -tyrosine can be simultaneously hosted and, hence, CB[7] was primarily acting as an inhibitor of self-assembly. In strong contrast, the larger CB[8] can form a ternary complex with two aromatic amino acids and hence CB[8] was acting primarily as cross-linker of multiple fibers and promoting the formation of larger aggregates. General insights on modulating supramolecular assembly can lead to new ways to introduce functionality in supramolecular polymers.

Model-driven optimization of multicomponent self-assembly processes.

Here, we report an engineering approach toward multicomponent self-assembly processes by developing a methodology to circumvent spurious, metastable assemblies. The formation of metastable aggregates often hampers self-assembly of molecular building blocks into the desired nanostructures. Strategies are explored to master the pathway complexity and avoid off-pathway aggregates by optimizing the rate of assembly along the correct pathway. We study as a model system the coassembly of two monomers, the R- and S-chiral enantiomers of a π-conjugated oligo(p-phenylene vinylene) derivative. Coassembly kinetics are analyzed by developing a kinetic model, which reveals the initial assembly of metastable structures buffering free monomers and thereby slows the formation of thermodynamically stable assemblies. These metastable assemblies exert greater influence on the thermodynamically favored self-assembly pathway if the ratio between both monomers approaches 1:1, in agreement with experimental results. Moreover, competition by metastable assemblies is highly temperature dependent and hampers the assembly of equilibrium nanostructures most effectively at intermediate temperatures. We demonstrate that the rate of the assembly process may be optimized by tuning the cooling rate. Finally, it is shown by simulation that increasing the driving force for assembly stepwise by changing the solvent composition may circumvent metastable pathways and thereby force the assembly process directly into the correct pathway.

Interaction of 14-3-3 proteins with the estrogen receptor alpha F domain provides a drug target interface.

Estrogen receptor alpha (ERα) is involved in numerous physiological and pathological processes, including breast cancer. Breast cancer therapy is therefore currently directed at inhibiting the transcriptional potency of ERα, either by blocking estrogen production through aromatase inhibitors or antiestrogens that compete for hormone binding. Due to resistance, new treatment modalities are needed and as ERα dimerization is essential for its activity, interference with receptor dimerization offers a new opportunity to exploit in drug design. Here we describe a unique mechanism of how ERα dimerization is negatively controlled by interaction with 14-3-3 proteins at the extreme C terminus of the receptor. Moreover, the small-molecule fusicoccin (FC) stabilizes this ERα/14-3-3 interaction. Cocrystallization of the trimeric ERα/14-3-3/FC complex provides the structural basis for this stabilization and shows the importance of phosphorylation of the penultimate Threonine (ERα-T(594)) for high-affinity interaction. We confirm that T(594) is a distinct ERα phosphorylation site in the breast cancer cell line MCF-7 using a phospho-T(594)-specific antibody and by mass spectrometry. In line with its ERα/14-3-3 interaction stabilizing effect, fusicoccin reduces the estradiol-stimulated ERα dimerization, inhibits ERα/chromatin interactions and downstream gene expression, resulting in decreased cell proliferation. Herewith, a unique functional phosphosite and an alternative regulation mechanism of ERα are provided, together with a small molecule that selectively targets this ERα/14-3-3 interface.

Programmable chemical reaction networks: emulating regulatory functions in living cells using a bottom-up approach.

Living cells are able to produce a wide variety of biological responses when subjected to biochemical stimuli. It has become apparent that these biological responses are regulated by complex chemical reaction networks (CRNs). Unravelling the function of these circuits is a key topic of both systems biology and synthetic biology. Recent progress at the interface of chemistry and biology together with the realisation that current experimental tools are insufficient to quantitatively understand the molecular logic of pathways inside living cells has triggered renewed interest in the bottom-up development of CRNs. This builds upon earlier work of physical chemists who extensively studied inorganic CRNs and showed how a system of chemical reactions can give rise to complex spatiotemporal responses such as oscillations and pattern formation. Using purified biochemical components, in vitro synthetic biologists have started to engineer simplified model systems with the goal of mimicking biological responses of intracellular circuits. Emulation and reconstruction of system-level properties of intracellular networks using simplified circuits are able to reveal key design principles and molecular programs that underlie the biological function of interest. In this Tutorial Review, we present an accessible overview of this emerging field starting with key studies on inorganic CRNs followed by a discussion of recent work involving purified biochemical components. Finally, we review recent work showing the versatility of programmable biochemical reaction networks (BRNs) in analytical and diagnostic applications.