Chirality-controlled spin scattering through quantum interference.

Chirality-induced spin selectivity has been reported in many experiments, but a generally accepted theoretical explanation has not yet been proposed. Here, we introduce a simple model system of a straight cylindrical free-electron wire containing a helical string of atomic scattering centers with spin-orbit interaction. The advantage of this simple model is that it allows deriving analytical expressions for the spin scattering rates, such that the origin of the effect can be easily followed. We find that spin-selective scattering can be viewed as resulting from the constructive interference of partial waves scattered by the spin-orbit terms. We demonstrate that forward scattering rates are independent of spin, while back scattering is spin dependent over wide windows of energy. Although the model does not represent the full details of electron transmission through chiral molecules, it clearly reveals a mechanism that could operate in chiral systems.

Current-Induced One-Dimensional Diffusion of Co Adatoms on Graphene Nanoribbons.

One-dimensional diffusion of Co adatoms on graphene nanoribbons has been induced and investigated by means of scanning tunnelling microscopy (STM). To this end, the nanoribbons and the Co adatoms have been imaged before and after injecting current pulses into the nanoribbons, with the STM tip in direct contact with the ribbon. We observe current-induced motion of the Co atoms along the nanoribbons, which is approximately described by a distribution expected for a thermally activated one-dimensional random walk. This indicates that the nanoribbons reach temperatures far beyond 100 K, which is well above the temperature of the underlying Au substrate. This model system can be developed further for the study of electromigration at the single-atom level.

Dynamic Tunneling Junctions at the Atomic Intersection of Two Twisted Graphene Edges.

The investigation of the transport properties of single molecules by flowing tunneling currents across extremely narrow gaps is relevant for challenges as diverse as the development of molecular electronics and sequencing of DNA. The achievement of well-defined electrode architectures remains a technical challenge, especially due to the necessity of high precision fabrication processes and the chemical instability of most bulk metals. Here, we illustrate a continuously adjustable tunneling junction between the edges of two twisted graphene sheets. The unique property of the graphene electrodes is that the sheets are rigidly supported all the way to the atomic edge. By analyzing the tunneling current characteristics, we also demonstrate that the spacing across the gap junction can be controllably adjusted. Finally, we demonstrate the transition from the tunneling regime to contact and the formation of an atomic-sized junction between the two edges of graphene.

ON the Nature of Ionic Liquid Gating of La2-xSrxCuO4.

Ionic liquids have recently been used as means of modulating the charge carrier properties of cuprates. The mechanism behind it, however, is still a matter of debate. In this paper we report experiments on ionic liquid gated ultrathin La2-xSrxCuO4 films. Our results show that the electrostatic part of gating has limited influence in the conductance of the cuprate in the gate voltage range of 0 to - 2 V. A non-electrostatic mechanism takes over for gate voltages below - 2 V. This mechanism most likely changes the oxygen concentration of the film. The results presented are in line with previous X-ray based studies on ionic liquid gating induced oxygenation of the cuprate materials YBa2Cu3O7-x and La2-xSrxCuO4.

Tuning the oriented deposition of gold nanorods on patterned substrates.

The controlled patterning of anisotropic gold nanoparticles is of crucial importance for many applications related to their optical properties. In this paper, we report that gold nanorods prepared by a seed-mediated synthesis protocol (without any further functionalization) can be selectively deposited on hydrophilic parts of hydrophobic-hydrophilic contrast patterned substrates. We have seen that, when nanorods with lengths much smaller than the width of the hydrophilic stripe are used, they disperse on these stripes with random orientation and tunable uniform particle separation. However, for nanorods having lengths comparable to the width of the hydrophilic stripes, confinement-induced alignment occurs. We observe that different interactions governing the assembly forces can be modulated by controlling the concentration of assembling nanorods and the width of the hydrophilic stripes, leading to markedly different degrees of alignment. Our strategy can be replicated for other anisotropic nanoparticles to produce well-controlled patterning of these nanoentities on surfaces.

Spatial variations of conductivity of self-assembled monolayers of dodecanethiol on Au/mica and Au/Si substrates.

Determining the conductivity of molecular layers is a crucial step in advancing towards applications in molecular electronics. A common test bed for fundamental investigations on how to acquire this conductivity are alkanethiol layers on gold substrates. A widely used approach in measuring the conductivity of a molecular layer is conductive atomic force microscopy. Using this method, we investigate the influence of a rougher and a flatter gold substrate on the lateral variation of the conductivity. We find that the roughness of the substrate crucially defines this variation. We conclude that it is paramount to adequately choose a gold substrate for investigations on molecular layer conductivity.

Detection of vibration-mode scattering in electronic shot noise.

We present shot noise measurements on Au nanowires showing very pronounced vibration-mode features. In accordance to recent theoretical predictions the sign of the inelastic signal, i.e., the signal due to vibration excitations, depends on the transmission probability becoming negative below a certain transmission value. We argue that the negative contribution to noise arises from coherent two-electron processes mediated by electron-phonon scattering and the Pauli exclusion principle. These signals can provide unique information on the local phonon population and lattice temperature of the nanoscale system.

Theory of Chirality Induced Spin Selectivity: Progress and Challenges.

A critical overview of the theory of the chirality-induced spin selectivity (CISS) effect, that is, phenomena in which the chirality of molecular species imparts significant spin selectivity to various electron processes, is provided. Based on discussions in a recently held workshop, and further work published since, the status of CISS effects-in electron transmission, electron transport, and chemical reactions-is reviewed. For each, a detailed discussion of the state-of-the-art in theoretical understanding is provided and remaining challenges and research opportunities are identified.

Direct evidence for Cooper pairing without a spectral gap in a disordered superconductor above Tc.

The idea that preformed Cooper pairs could exist in a superconductor at temperatures higher than its zero-resistance critical temperature (Tc) has been explored for unconventional, interfacial, and disordered superconductors, but direct experimental evidence is lacking. We used scanning tunneling noise spectroscopy to show that preformed Cooper pairs exist up to temperatures much higher than Tc in the disordered superconductor titanium nitride by observing an enhancement in the shot noise that is equivalent to a change of the effective charge from one to two electron charges. We further show that the spectroscopic gap fills up rather than closes with increasing temperature. Our results demonstrate the existence of a state above Tc that, much like an ordinary metal, has no (pseudo)gap but carries charge through paired electrons.

Sandwich-type gated mechanical break junctions.

We introduce a new device architecture for the independent mechanical and electrostatic tuning of nanoscale charge transport. In contrast to previous gated mechanical break junctions with suspended source-drain electrodes, the devices presented here prevent an electromechanical tuning of the electrode gap by the gate. This significant improvement originates from a direct deposition of the source and the drain electrodes on the gate dielectric. The plasma-enhanced native oxide on the aluminum gate electrode enables measurements at gate voltages up to 1.8 V at cryogenic temperatures. Throughout the bending-controlled tuning of the source-drain distance, the electrical continuity of the gate electrode is maintained. A nanoscale island in the Coulomb blockade regime serves as a first experimental test system for the devices, in which the mechanical and electrical control of charge transport is demonstrated.

A nanoelectromechanical single-atom switch.

We have exploited the electromechanical properties of gated mechanical break junctions to form single-atom relays. The gate voltage can be used to reversibly switch between a monatomic contact with a conductance around 2e(2)/h and the tunneling regime. In tunneling, the source-drain conductance varies smoothly with gate voltage. The characteristics of the devices can be understood within a simple continuum model. It indicates that the elastic properties of the substrate facilitate the electromechanical tuning and that the details of the switching depend sensitively on the nanoscale geometry of the electrode tips.

Intuitive human interface to a scanning tunnelling microscope: observation of parity oscillations for a single atomic chain.

A new way to control individual molecules and monoatomic chains is devised by preparing a human-machine augmented system in which the operator and the machine are connected by a real-time simulation. Here, a 3D motion control system is integrated with an ultra-high vacuum (UHV) low-temperature scanning tunnelling microscope (STM). Moreover, we coupled a real-time molecular dynamics (MD) simulation to the motion control system that provides a continuous visual feedback to the operator during atomic manipulation. This allows the operator to become a part of the experiment and to make any adaptable tip trajectory that could be useful for atomic manipulation in three dimensions. The strength of this system is demonstrated by preparing and lifting a monoatomic chain of gold atoms from a Au(111) surface in a well-controlled manner. We have demonstrated the existence of Fabry-Pérot-type electronic oscillations in such a monoatomic chain of gold atoms and determined its phase, which was difficult to ascertain previously. We also show here a new geometric procedure to infer the adatom positions and therefore information about the substrate atoms, which are not easily visible on clean metallic surfaces such as gold. This method enables a new controlled atom manipulation technique, which we will refer to as point contact pushing (PCP) technique.

Fullerene-based anchoring groups for molecular electronics.

We present results on a new fullerene-based anchoring group for molecular electronics. Using lithographic mechanically controllable break junctions in vacuum we have determined the conductance and stability of single-molecule junctions of 1,4-bis(fullero[c]pyrrolidin-1-yl)benzene. The compound can be self-assembled from solution and has a low-bias conductance of 3 x 10(-4) G0. Compared to 1,4-benzenedithiol the fullerene-anchored molecule exhibits a considerably lower conductance spread. In addition, the signature of the new compound in histograms is more significant than that of 1,4-benzenediamine, probably owing to a more stable adsorption motif. Statistical analyses of the breaking of the junctions confirm the stability of the fullerene-gold bond.

Towards Controlled Single-Molecule Manipulation Using "Real-Time" Molecular Dynamics Simulation: A GPU Implementation.

Molecular electronics saw its birth with the idea to build electronic circuitry with single molecules as individual components. Even though commercial applications are still modest, it has served an important part in the study of fundamental physics at the scale of single atoms and molecules. It is now a routine procedure in many research groups around the world to connect a single molecule between two metallic leads. What is unknown is the nature of this coupling between the molecule and the leads. We have demonstrated recently (Tewari, 2018, Ph.D. Thesis) our new setup based on a scanning tunneling microscope, which can be used to controllably manipulate single molecules and atomic chains. In this article, we will present the extension of our molecular dynamic simulator attached to this system for the manipulation of single molecules in real time using a graphics processing unit (GPU). This will not only aid in controlled lift-off of single molecules, but will also provide details about changes in the molecular conformations during the manipulation. This information could serve as important input for theoretical models and for bridging the gap between the theory and experiments.

Efficient seed-mediated method for the large-scale synthesis of Au nanorods.

Seed-mediated methods are widely followed for the synthesis of Au nanorods (NRs). However, mostly dilute concentrations of the Au precursor (HAuCl4) are used in the growth solution, which leads to a low final concentration of NRs. Attempts of increasing the concentration of NRs by simply increasing the concentration of HAuCl4, other reagents in the growth solution and seeds lead to a faster growth kinetics which is not favourable for NR growth. Herein, we demonstrate that the increase in growth kinetics for high concentrations of reagents in growth solution can be neutralised by decreasing the pH of the solution. The synthesis of the NRs can be scaled up by using higher concentrations of reagents and adding an optimum concentration of HCl in the growth solution. The concentration of HAuCl4 in the growth solution can be increased up to 5 mM, and 10-20 times more NRs can be synthesised for the same reaction volume compared to that of the conventional seed-mediated method. We have also noticed that a cetyltrimethylammonium bromide (CTAB)-to-HAuCl4 molar ratio of 50 is sufficient for obtaining high yield of NRs.

Robust procedure for creating and characterizing the atomic structure of scanning tunneling microscope tips.

Scanning tunneling microscopes (STM) are used extensively for studying and manipulating matter at the atomic scale. In spite of the critical role of the STM tip, procedures for controlling the atomic-scale shape of STM tips have not been rigorously justified. Here, we present a method for preparing tips in situ while ensuring the crystalline structure and a reproducibly prepared tip structure up to the second atomic layer. We demonstrate a controlled evolution of such tips starting from undefined tip shapes.

Fast and accurate shot noise measurements on atomic-size junctions in the MHz regime.

Shot noise measurements on atomic and molecular junctions provide rich information about the quantum transport properties of the junctions and on the inelastic scattering events taking place in the process. Dissipation at the nanoscale, a problem of central interest in nano-electronics, can be studied in its most explicit and simplified form. Here, we describe a measurement technique that permits extending previous noise measurements to a much higher frequency range, and to much higher bias voltage range, while maintaining a high accuracy in noise and conductance. We also demonstrate the advantages of having access to the spectral information for diagnostics.

Evidence for non-conservative current-induced forces in the breaking of Au and Pt atomic chains.

This experimental work aims at probing current-induced forces at the atomic scale. Specifically it addresses predictions in recent work regarding the appearance of run-away modes as a result of a combined effect of the non-conservative wind force and a 'Berry force'. The systems we consider here are atomic chains of Au and Pt atoms, for which we investigate the distribution of break down voltage values. We observe two distinct modes of breaking for Au atomic chains. The breaking at high voltage appears to behave as expected for regular break down by thermal excitation due to Joule heating. However, there is a low-voltage breaking mode that has characteristics expected for the mechanism of current-induced forces. Although a full comparison would require more detailed information on the individual atomic configurations, the systems we consider are very similar to those considered in recent model calculations and the comparison between experiment and theory is very encouraging for the interpretation we propose.

Facile synthesis of gold nanoworms with a tunable length and aspect ratio through oriented attachment of nanoparticles.

We report a seedless protocol based on the oriented attachment of nanoparticles for the synthesis of Au nanoworms (NWs). NWs are grown by reducing HAuCl4 with ascorbic acid (AA) in high pH reaction medium and in the presence of growth directional agents, cetyltrimethylammonium bromide (CTAB) and AgNO3. Although we have used the same reducing and growth directional agents as typically used for the synthesis of Au nanorods, the growth mechanism of NWs is markedly different from that of nanorods. Instead of the anisotropic growth of seed particles, the NWs grow through oriented attachment of nanoparticles. By varying different reaction parameters we have seen that the length of NWs can be controlled from tens of nanometers to a micrometer. Furthermore, the aspect ratio (AR) can be tuned from 2 to 30. This is almost the whole range of AR and length for Au nanorods so far achieved with seed-mediated multiple step synthesis protocols.