SCCS scientific opinion on Butylated hydroxytoluene (BHT) - SCCS/1636/21.

OPINION TO BE CITED AS: SCCS (Scientific Committee on Consumer Safety), scientific opinion on Butylated hydroxytoluene (BHT), preliminary version of September 27, 2021, final version of December 2, 2021, SCCS/1636/21.

SCCS Scientific Opinion on Acid Yellow 3 (submission II) - SCCS/1631/21.

Opinion to be cited as: SCCS (Scientific Committee on Consumer Safety), Opinion on Acid Yellow 3 - C054 (CAS Number 8004-92-0, EC No 305-897-5), submission II, preliminary version of 7 May 2021, final version of 23 July 2021, SCCS/1631/21.

Assessing Human Exposure to SVOCs in Materials, Products, and Articles: A Modular Mechanistic Framework.

A critical review of the current state of knowledge of chemical emissions from indoor sources, partitioning among indoor compartments, and the ensuing indoor exposure leads to a proposal for a modular mechanistic framework for predicting human exposure to semivolatile organic compounds (SVOCs). Mechanistically consistent source emission categories include solid, soft, frequent contact, applied, sprayed, and high temperature sources. Environmental compartments are the gas phase, airborne particles, settled dust, indoor surfaces, and clothing. Identified research needs are the development of dynamic emission models for several of the source emission categories and of estimation strategies for critical model parameters. The modular structure of the framework facilitates subsequent inclusion of new knowledge, other chemical classes of indoor pollutants, and additional mechanistic processes relevant to human exposure indoors. The framework may serve as the foundation for developing an open-source community model to better support collaborative research and improve access for application by stakeholders. Combining exposure estimates derived using this framework with toxicity data for different end points and toxicokinetic mechanisms will accelerate chemical risk prioritization, advance effective chemical management decisions, and protect public health.

The SCCS scientific advice on the safety of nanomaterials in cosmetics.

The Cosmetic Regulation (EC) No 1223/2009 specifically covers the risk of nanomaterials used in cosmetic products. If there are concerns regarding the safety of a nanomaterial, the European Commission refers it to the SCCS for a scientific opinion. The Commission mandated the SCCS to identify the scientific basis for safety concerns that could be used as a basis for identifying and prioritising nanomaterials for safety assessment, and to revisit previous inconclusive SCCS opinions on nanomaterials to identify any concerns for potential risks to the consumer health. The SCCS Scientific Advice identified the key general aspects of nanomaterials that should raise a safety concern for a safety assessor/manager, so that the nanomaterial(s) in question could be subjected to safety assessment to establish safety to the consumer. The Advice also developed a list of the nanomaterials notified to the Commission for use in cosmetics in an order of priority for safety assessment, and revisited three previous inconclusive opinions on nanomaterials to highlight concerns over consumer safety that merited further safety assessment.

Linking Probabilistic Exposure and Pharmacokinetic Modeling To Assess the Cumulative Risk from the Bisphenols BPA, BPS, BPF, and BPAF for Europeans.

The bisphenols S, F, and AF (BPS, BPF, and BPAF) are used to replace the endocrine disrupting chemical bisphenol A (BPA) while exerting estrogenic effects of comparable potency. We assessed the cumulative risk for the aforementioned BPs in Europe and compared the risk before and after the year 2011, which was when the first BPA restrictions became effective. For this, we probabilistically modeled external exposures from food, personal care products (PCPs), thermal paper, and dust (using the tools MCRA and PACEM for exposures from food and PCPs, respectively). We calculated internal concentrations of unconjugated BPs with substance-specific PBPK models and cumulated these concentrations normalized by estrogenic potency. The resulting mean internal cumulative exposures to unconjugated BPs were 3.8 and 2.1 ng/kg bw/day before and after restrictions, respectively. This decline was mainly caused by the replacement of BPA by BPS in thermal paper and the lower dermal uptake of BPS compared to BPA. However, the decline was not significant: the selected uncertainty intervals overlapped (P2.5-P97.5 uncertainty intervals of 2.7-4.9 and 1.3-6.3 ng/kg bw/day before and after restrictions, respectively). The upper uncertainty bounds for cumulative exposure were higher after restrictions, which reflects the larger uncertainty around exposures to substitutes compared to BPA.

Polybrominated Diphenyl Ether (PBDE) Accumulation in Farmed Salmon Evaluated Using a Dynamic Sea-Cage Production Model.

Food is an important source of human exposure to hazardous chemicals. Chemical concentration in a food item depends on local environmental contamination, production conditions, and, for animal-derived foods, on feed. Here, we investigate these influences on the accumulation of individual polybrominated diphenyl ether congeners (PBDEs) in farmed Atlantic salmon ( Salmo salar). We develop a dynamic model over a full sea-cage salmon production cycle. To assess the influence of metabolic debromination on PBDE congener profiles, in vitro measurements of debromination rates in fish liver cells were extrapolated to whole-body metabolic rate constants. Model results indicate that the dominant factors governing PBDE concentration in Atlantic salmon fillet are uptake via contaminated feed and fish growth, whereas the influence of metabolic debromination is minor. PBDE concentrations in fish feed depend on several factors, including the geographic origin of fish feed ingredients, which are produced and traded globally. Human exposure to PBDE via salmon consumption is less influenced by environmental concentrations at the location of salmon farming than by environmental concentrations influencing feed components. This dependence of PBDE concentrations in salmon on the origin and composition of feed reveals the complexity of predicting contaminant concentrations in globally traded food.

Direct and Air-Mediated Transfer of Labeled SVOCs from Indoor Sources to Dust.

Two small-scale field studies were conducted to investigate the transfer of substances from products into dust due to direct and air-mediated transfer. The project focused on semivolatile organic compounds (SVOCs), which are frequently found in and re-emitted from dust. For the field studies, four artificial products containing deuterium-labeled SVOCs (eight phthalates and adipates) were installed in residential indoor environments. Two plastic products were installed vertically to investigate substance transfer due to evaporation into air. One plastic product and a carpet were installed horizontally to investigate the direct transfer from source to dust. A pyrethroid was intentionally released by spraying a commercial spray. Dust samples were collected from the floor, elevated surfaces in the room and the surfaces of the horizontally installed products. We observed that the dust concentrations of substances exclusively transferred via air were similar at different collection sites, but the concentrations of chemicals present in horizontal products were up to 3 orders of magnitude higher in dust deposited on the source. We conclude that direct transfer from source into dust substantially increases the final SVOC concentration in dust in contact with the source, regardless of the vapor pressure of investigated SVOCs, and may lead to larger human exposure.

Occurrence and concentrations of isothiazolinones in detergents and cosmetics in Switzerland.

BACKGROUND: In recent years, the frequency of contact allergy to isothiazolinones has increased alarmingly in Europe, but only limited data are available on concentrations of isothiazolinones in consumer products. OBJECTIVES: To examine the current frequency of isothiazolinones [methylisothiazolinone (MI), methylchloroisothiazolinone (MCI), benzisothiazolinone (BIT), and octylisothiazolinone (OIT)] in a wide array of detergents and cosmetics relevant for the Swiss population. METHODS: By means of a market survey, the occurrence of isothiazolinones was investigated in 1948 consumer products. Of these, 88 products were analysed by liquid chromatography-high-resolution mass spectrometry after ultrasonic extraction. RESULTS: Only 7.6% of all cosmetics contained isothiazolinones, but the prevalence in detergents was much higher (42.9%). The measured concentration ranges in detergents were 4.3­10, 3.5­279, 3.8­186 and 7.9 ppm (one product only) for MCI, MI, BIT, and OIT, respectively [corrected]. For cosmetics, these were 1.3-133 and 4.8 ppm (one product only) for MI and MCI, respectively. CONCLUSIONS: Our study has shown that high concentrations of isothiazolinones (including MI) can be found in a large variety of products, in particular in detergents. Therefore, the safe use of these preservatives should be re-evaluated by including detergents in the exposure assessment.

Tracking SVOCs' Transfer from Products to Indoor Air and Settled Dust with Deuterium-Labeled Substances.

Semivolatile organic compounds (SVOCs) can be released from products and distributed in the indoor environment, including air and dust. However, the mechanisms and the extent of substance transfer into air and dust are not well understood. Therefore, in a small-scale field study the transfer of nine SVOCs was investigated: Four artificial consumer products were doped with eight deuterium-labeled plasticizers (phthalates and adipates) and installed in five homes to investigate the emission processes of evaporation, abrasion, and direct transfer. Intentional release was studied with a commercial spray containing a pyrethroid. During the 12 week study, indoor air and settled dust samples were collected and analyzed. On the basis of our measurement results, we conclude that the octanol-air partitioning coefficient Koa is a major determinant for the substance transfer into either air or dust: A high Koa implies that the substance is more likely to be found in dust than in air. The emission process also plays a role: For spraying, we found higher dust and air concentrations than for evaporation. In contrast, apartment parameters like air exchange rate or temperature had just a minor influence. Another important mechanistic finding was that although transfer from product to dust currently is postulated to be mostly mediated by air, direct transport from product to dust on the product surface was also observed.

Translocation of gold nanoparticles across the lung epithelial tissue barrier: Combining in vitro and in silico methods to substitute in vivo experiments.

BACKGROUND: The lung epithelial tissue barrier represents the main portal for entry of inhaled nanoparticles (NPs) into the systemic circulation. Thus great efforts are currently being made to determine adverse health effects associated with inhalation of NPs. However, to date very little is known about factors that determine the pulmonary translocation of NPs and their subsequent distribution to secondary organs. METHODS: A novel two-step approach to assess the biokinetics of inhaled NPs is presented. In a first step, alveolar epithelial cellular monolayers (CMLs) at the air-liquid interface (ALI) were exposed to aerosolized NPs to determine their translocation kinetics across the epithelial tissue barrier. Then, in a second step, the distribution to secondary organs was predicted with a physiologically based pharmacokinetic (PBPK) model. Monodisperse, spherical, well-characterized, negatively charged gold nanoparticles (AuNP) were used as model NPs. Furthermore, to obtain a comprehensive picture of the translocation kinetics in different species, human (A549) and mouse (MLE-12) alveolar epithelial CMLs were exposed to ionic gold and to various doses (i.e., 25, 50, 100, 150, 200 ng/cm(2)) and sizes (i.e., 2, 7, 18, 46, 80 nm) of AuNP, and incubated post-exposure for different time periods (i.e., 0, 2, 8, 24, 48, 72 h). RESULTS: The translocation kinetics of the AuNP across A549 and MLE-12 CMLs was similar. The translocated fraction was (1) inversely proportional to the particle size, and (2) independent of the applied dose (up to 100 ng/cm(2)). Furthermore, supplementing the A549 CML with two immune cells, i.e., macrophages and dendritic cells, did not significantly change the amount of translocated AuNP. Comparison of the measured translocation kinetics and modeled biodistribution with in vivo data from literature showed that the combination of in vitro and in silico methods can accurately predict the in vivo biokinetics of inhaled/instilled AuNP. CONCLUSION: Our approach to combine in vitro and in silico methods for assessing the pulmonary translocation and biodistribution of NPs has the potential to replace short-term animal studies which aim to assess the pulmonary absorption and biodistribution of NPs, and to serve as a screening tool to identify NPs of special concern.

Scientific Basis for Regulatory Decision-Making of Nanomaterials Report on the Workshop, 20-21 January 2014, Center of Applied Ecotoxicology, Dübendorf.

The key findings of a workshop jointly organized by the Swiss Centre of Applied Ecotoxicity, the Swiss Centre for Applied Human Toxicology (SCAHT), and the Federal Office of Public Health (FOPH) are summarized and provide a critical analysis of the current regulatory framework for nanomaterials and a snapshot of some hot topics in nanoscience.

Scientific Basis for Regulatory Decision-Making of Nanomaterials Report on the Workshop, 20-21 January 2014, Center of Applied Ecotoxicology, Dübendorf.

The key findings of a workshop jointly organized by the Swiss Centre of Applied Ecotoxicity, the Swiss Centre for Applied Human Toxicology (SCAHT), and the Federal Office of Public Health (FOPH) are summarized and provide a critical analysis of the current regulatory framework for nanomaterials and a snapshot of some hot topics in nanoscience.

Human exposure to conventional and nanoparticle--containing sprays-a critical review.

The release of pesticides from conventional spray products has been investigated in depth, and suitable analytical techniques detecting the mass of the released substances are available. In contrast, nanoparticle-containing sprays are less studied, although they are perceived as critical for consumers because inhalation exposure can occur to potentially toxic nanoparticles. A few recent studies presented analytical concepts for exposure experiments and generated data for exposure assessment. This study attempts to review and compare the current approaches to characterize nanosprays and to identify challenges for future research. Furthermore, experimental setups used for exposure assessment from conventional sprays are reviewed and compared to setups used for nanoparticle-containing sprays. National and international norms dealing with nanoparticle characterization, spray characterization and exposure are inspected with regard to their usefulness for standardizing exposure assessment. Different approaches in the field of exposure modeling are reviewed and compared. The conclusion is that due to largely varying experimental setups to date exposure values for nanosprays are difficult to compare. All studies are only conducted with a limited set of sprays, and no systematic evaluation of the study conditions is available. A suitable set of experimental setups as well as minimum reporting requirements should be agreed upon to enable the systematic evaluation of consumer sprays in the future. Indispensable features of such experimental setups are developed in this review.

Towards a Swiss health study with human biomonitoring: Learnings from the pilot phase about participation and design.

BACKGROUND: A large-scale national cohort aiming at investigating the health status and determinants in the general population is essential for high-quality public health research and regulatory decision-making. We present the protocol and first results of the pilot phase to a Swiss national cohort aiming at establishing the study procedures, evaluating feasibility, and assessing participation and willingness to participate. METHODS: The pilot phase 2020/21 included 3 components recruited via different channels: a population-based cross-sectional study targeting the adult population (20-69 years) of the Vaud and Bern cantons via personal invitation, a sub-study on selenium in a convenience sample of vegans and vegetarians via non-personal invitation in vegan/vegetarian networks, and a self-selected sample via news promotion (restricted protocol). Along with a participatory approach and participation, we tested the study procedures including online questionnaires, onsite health examination, food intake, physical activity assessments and biosample collection following high-quality standards. RESULTS: The population-based study and the selenium sub-study had 638 (participation rate: 14%) and 109 participants, respectively, both with an over-representation of women. Of altogether 1349 recruited participants over 90% expressed interest in participating to a national health study, over 75% to contribute to medicine progress and help improving others' health, whereas about one third expressed concerns over data protection and data misuse. CONCLUSIONS: Publicly accessible high-quality public health data and human biomonitoring samples were collected. There is high interest of the general population in taking part in a national cohort on health. Challenges reside in achieving a higher participation rate and external validity. For project management clear governance is key.

FAIR environmental and health registry (FAIREHR)- supporting the science to policy interface and life science research, development and innovation.

The environmental impact on health is an inevitable by-product of human activity. Environmental health sciences is a multidisciplinary field addressing complex issues on how people are exposed to hazardous chemicals that can potentially affect adversely the health of present and future generations. Exposure sciences and environmental epidemiology are becoming increasingly data-driven and their efficiency and effectiveness can significantly improve by implementing the FAIR (findable, accessible, interoperable, reusable) principles for scientific data management and stewardship. This will enable data integration, interoperability and (re)use while also facilitating the use of new and powerful analytical tools such as artificial intelligence and machine learning in the benefit of public health policy, and research, development and innovation (RDI). Early research planning is critical to ensuring data is FAIR at the outset. This entails a well-informed and planned strategy concerning the identification of appropriate data and metadata to be gathered, along with established procedures for their collection, documentation, and management. Furthermore, suitable approaches must be implemented to evaluate and ensure the quality of the data. Therefore, the 'Europe Regional Chapter of the International Society of Exposure Science' (ISES Europe) human biomonitoring working group (ISES Europe HBM WG) proposes the development of a FAIR Environment and health registry (FAIREHR) (hereafter FAIREHR). FAIR Environment and health registry offers preregistration of studies on exposure sciences and environmental epidemiology using HBM (as a starting point) across all areas of environmental and occupational health globally. The registry is proposed to receive a dedicated web-based interface, to be electronically searchable and to be available to all relevant data providers, users and stakeholders. Planned Human biomonitoring studies would ideally be registered before formal recruitment of study participants. The resulting FAIREHR would contain public records of metadata such as study design, data management, an audit trail of major changes to planned methods, details of when the study will be completed, and links to resulting publications and data repositories when provided by the authors. The FAIREHR would function as an integrated platform designed to cater to the needs of scientists, companies, publishers, and policymakers by providing user-friendly features. The implementation of FAIREHR is expected to yield significant benefits in terms of enabling more effective utilization of human biomonitoring (HBM) data.

Application of human biomonitoring data to support policy development, raise awareness and environmental public health protection among countries within the HBM4EU project.

Most countries have acknowledged the importance of assessing and quantifying their population's internal exposure from chemicals in air, water, soil, food and other consumer products due to the potential health and economic impact. Human biomonitoring (HBM) is a valuable tool which can be used to quantify such exposures and effects. Results from HBM studies can also contribute to improving public health by providing evidence of individuals' internal chemical exposure as well as data to understand the burden of disease and associated costs thereby stimulating the development and implementation of evidence-based policy. To have a holistic view on HBM data utilisation, a multi-case research approach was used to explore the use of HBM data to support national chemical regulations, protect public health and raise awareness among countries participating in the HBM4EU project. The Human Biomonitoring for Europe (HBM4EU) Initiative (https://www.hbm4eu.eu/) is a collaborative effort involving 30 countries, the European Environment Agency (EEA) and the European Commission (contracting authority) to harmonise procedures across Europe and advance research into the understanding of the health impacts of environmental chemical exposure. One of the aims of the project was to use HBM data to support evidence based chemical policy and make this information timely and directly available for policy makers and all partners. The main data source for this article was the narratives collected from 27 countries within the HBM4EU project. The countries (self-selection) were grouped into 3 categories in terms of HBM data usage either for public awareness, policy support or for the establishment HBM programme. Narratives were analysed/summarised using guidelines and templates that focused on ministries involved in or advocating for HBM; steps required to engage policy makers; barriers, drivers and opportunities in developing a HBM programme. The narratives reported the use of HBM data either for raising awareness or addressing environmental/public health issues and policy development. The ministries of Health and Environment were reported to be the most prominent entities advocating for HBM, the involvement of several authorities/institutions in the national hubs was also cited to create an avenue to interact, discuss and gain the attention of policy makers. Participating in European projects and the general population interest in HBM studies were seen as drivers and opportunities in developing HBM programmes. A key barrier that was cited by countries for establishing and sustaining national HBM programmes was funding which is mainly due to the high costs associated with the collection and chemical analysis of human samples. Although challenges and barriers still exist, most countries within Europe were already conversant with the benefits and opportunities of HBM. This article offers important insights into factors associated with the utilisation of HBM data for policy support and public awareness.

Titanium dioxide nanoparticles in food and personal care products.

Titanium dioxide is a common additive in many food, personal care, and other consumer products used by people, which after use can enter the sewage system and, subsequently, enter the environment as treated effluent discharged to surface waters or biosolids applied to agricultural land, incinerated wastes, or landfill solids. This study quantifies the amount of titanium in common food products, derives estimates of human exposure to dietary (nano-) TiO(2), and discusses the impact of the nanoscale fraction of TiO(2) entering the environment. The foods with the highest content of TiO(2) included candies, sweets, and chewing gums. Among personal care products, toothpastes and select sunscreens contained 1% to >10% titanium by weight. While some other crèmes contained titanium, despite being colored white, most shampoos, deodorants, and shaving creams contained the lowest levels of titanium (<0.01 µg/mg). For several high-consumption pharmaceuticals, the titanium content ranged from below the instrument detection limit (0.0001 µg Ti/mg) to a high of 0.014 µg Ti/mg. Electron microscopy and stability testing of food-grade TiO(2) (E171) suggests that approximately 36% of the particles are less than 100 nm in at least one dimension and that it readily disperses in water as fairly stable colloids. However, filtration of water solubilized consumer products and personal care products indicated that less than 5% of the titanium was able to pass through 0.45 or 0.7 µm pores. Two white paints contained 110 µg Ti/mg while three sealants (i.e., prime coat paint) contained less titanium (25 to 40 µg Ti/mg). This research showed that, while many white-colored products contained titanium, it was not a prerequisite. Although several of these product classes contained low amounts of titanium, their widespread use and disposal down the drain and eventually to wastewater treatment plants (WWTPs) deserves attention. A Monte Carlo human exposure analysis to TiO(2) through foods identified children as having the highest exposures because TiO(2) content of sweets is higher than other food products and that a typical exposure for a US adult may be on the order of 1 mg Ti per kilogram body weight per day. Thus, because of the millions of tons of titanium-based white pigment used annually, testing should focus on food-grade TiO(2) (E171) rather than that adopted in many environmental health and safety tests (i.e., P25), which is used in much lower amounts in products less likely to enter the environment (e.g., catalyst supports, photocatalytic coatings).

The European exposure science strategy 2020-2030.

Exposure science is an emerging and rapidly growing field dedicated to all aspects concerning the contact between chemical, biological, physical or psycho-social stressors and human and ecological receptors. With that, exposure science plays a central role in protecting human and ecosystem health, and contributes to the global transition towards a green and sustainable society. In Europe, however, exposure science is currently not sufficiently recognised as a scientific field, resulting in inefficient uptake into policies. In response, the wider European exposure science community developed elements and actions under the auspices of the Europe Regional Chapter of the International Society of Exposure Science (ISES Europe), for identified priority areas, namely education, exposure models, exposure data, human biomonitoring, and policy uptake. In the present document, we synthesize these strategic elements into an overarching 'European Exposure Science Strategy 2020-2030', following three strategic objectives that focus on acknowledging exposure science as an independent and interconnected field, harmonizing approaches and tools across regulations, and exploring collaboration, education and funding mechanisms. To operationalise this strategy, we present concrete key actions and propose initiatives and funding options for advancing the underlying science, cultivating broader education and cross-sector exposure knowledge transfer, and fostering effective uptake of exposure information into policy. We aim at anchoring European efforts in the global exposure science context, with a special focus on the interface between scientific advancements, application in decision support, and dissemination and training. This will help to develop exposure science as a strong scientific field with the ultimate goal to successfully assess and manage various stressors across sectors and geographic scales.

Theoretical Background of Occupational-Exposure Models-Report of an Expert Workshop of the ISES Europe Working Group "Exposure Models".

On 20 October 2020, the Working Group "Exposure Models" of the Europe Regional Chapter of the International Society of Exposure Science (ISES Europe) organised an online workshop to discuss the theoretical background of models for the assessment of occupational exposure to chemicals. In this report, participants of the workshop with an active role before and during the workshop summarise the most relevant discussion points and conclusions of this well-attended workshop. ISES Europe has identified exposure modelling as one priority area for the strategic development of exposure science in Europe in the coming years. This specific workshop aimed to discuss the main challenges in developing, validating, and using occupational-exposure models for regulatory purposes. The theoretical background, application domain, and limitations of different modelling approaches were presented and discussed, focusing on empirical "modifying-factor" or "mass-balance-based" approaches. During the discussions, these approaches were compared and analysed. Possibilities to address the discussed challenges could be a validation study involving alternative modelling approaches. The wider discussion touched upon the close relationship between modelling and monitoring and the need for better linkage of the methods and the need for common monitoring databases that include data on model parameters.

Framework for developing an exposure science curriculum as part of the European Exposure Science Strategy 2020-2030.

BACKGROUND: Evaluating and managing exposures to chemical, physical and biological stressors, which frequently interplay with psychological stressors as well as social and behavioural aspects, is crucial for protecting human and environmental health and transitioning towards a sustainable future. Advances in our understanding of exposure rely on input from well-trained exposure scientists. However, no education programmes in Europe are currently explicitly dedicated to cover the broader range of exposure science approaches, applications, stressors and receptors. OBJECTIVE: To address this challenge, a curriculum is needed that yields credible, well-defined career pathways in exposure science. METHODS: Needs and conditions for advancing exposure science education in Europe were identified. As a starting point for a way forward, harmonised learning outcomes for exposure science were defined at each level of the European Qualifications Framework. The course programme coordinators were recruited for three varying courses, with respect to the course level and the proportion of the curriculum dedicated to exposure science. These courses were assessed via our systematic course review procedure. Finally, strategic objectives and actions are proposed to build exposure science education programmes. RESULTS: The ISES Europe 'Education, Training and Communication' expert working group developed a framework for creating a viable exposure science curriculum. Harmonised learning outcomes were structured under eight learning levels, categorised by knowledge, skills and competence. Illustrative case studies demonstrated how education providers integrated these learning outcomes for their educational context and aligned the overall exposure science curriculum. CONCLUSIONS: The international recognition and adoption of exposure science education will enable advances in addressing global exposure science challenges for various stressors, from behavioural aspects from individual to population scale, and effective communication between exposure scientists and relevant stakeholders and policy makers, as part of the European Exposure Science Strategy 2020-2030.