Quantification of Methane Emissions from Cold Heavy Oil Production with Sand Extraction in Alberta and Saskatchewan, Canada.

Cold heavy oil production with sand (CHOPS) is an extraction process for heavy oil in Canada, with the potential to lead to higher CH4 venting than conventional oil sites, that have not been adequately characterized. In order to quantify CH4 emissions from CHOPS activities, a focused aerial measurement campaign was conducted in the Canadian provinces of Alberta and Saskatchewan in June 2018. Total CH4 emissions from each of 10 clusters of CHOPS wells (containing 22-167 well sites per cluster) were derived using a mass balance computation algorithm that uses in situ wind data measurement on board aircraft. Results show that there is no statistically significant difference in CH4 emissions from CHOPS wells between the two provinces. Cluster-aggregated emission factors (EF) were determined using correspondingly aggregated production volumes. The average CH4 EF was 70.4 ± 36.9 kg/m3 produced oil for the Alberta wells and 55.1 ± 13.7 kg/m3 produced oil for the Saskatchewan wells. Using these EF and heavy oil production volumes reported to provincial regulators, the annual CH4 emissions from CHOPS were estimated to be 121% larger than CHOPS emissions extracted from Canada's National Inventory Report (NIR) for Saskatchewan. The EF were found to be positively correlated with the percentage of nonpiped production volumes in each cluster, indicating higher emissions for nonpiped wells while suggesting an avenue for methane emission reductions. A comparison with recent measurements indicates relatively limited effectiveness of regulations for Saskatchewan compared to those in Alberta. The results of this study indicate the substantial contribution of CHOPS operations to the underreporting observed in the NIR and provide measurement-based EF that can be used to develop improved emissions inventories for this sector and mitigate CH4 emissions from CHOPS operations.

Properties and Processing of Aviation Exhaust Aerosol at Cruise Altitude Observed from the IAGOS-CARIBIC Flying Laboratory.

The characteristics of aviation-induced aerosol, its processing, and effects on cirrus clouds and climate are still associated with large uncertainties. Properties of aviation-induced aerosol, however, are crucially needed for the assessment of aviation's climate impacts today and in the future. We identified more than 1100 aircraft plume encounters during passenger aircraft flights of the IAGOS-CARIBIC Flying Laboratory from July 2018 to March 2020. The aerosol properties inside aircraft plumes were similar, independent of the altitude (i.e., upper troposphere, tropopause region, and lowermost stratosphere). The exhaust aerosol was found to be mostly externally mixed compared to the internally mixed background aerosol, even at a plume age of 1 to 3 h. No enhancement of accumulation mode particles (diameter >250 nm) could be detected inside the aircraft plumes. Particle number emission indices (EIs) deduced from the observations in aged plumes are in the same range as values reported from engine certifications. This finding, together with the observed external mixing state inside the plumes, indicates that the aviation exhaust aerosol almost remains in its emission state during plume expansion. It also reveals that the particle number EIs used in global models are within the range of the EIs measured in aged plumes.

On Nucleation Pathways and Particle Size Distribution Evolutions in Stratospheric Aircraft Exhaust Plumes with H2SO4 Enhancement.

Stratospheric aerosol injection (SAI) is proposed as a means of reducing global warming and climate change impacts. Similar to aerosol enhancements produced by volcanic eruptions, introducing particles into the stratosphere would reflect sunlight and reduce the level of warming. However, uncertainties remain about the roles of nucleation mechanisms, ionized molecules, impurities (unevaporated residuals of injected precursors), and ambient conditions in the generation of SAI particles optimally sized to reflect sunlight. Here, we use a kinetic ion-mediated and homogeneous nucleation model to study the formation of H2SO4 particles in aircraft exhaust plumes with direct injection of H2SO4 vapor. We find that under the conditions that produce particles of desired sizes (diameter ∼200-300 nm), nucleation occurs in the nascent (t < 0.01 s), hot (T = 360-445 K), and dry (RH = 0.01-0.1%) plume and is predominantly unary. Nucleation on chemiions occurs first, followed by neutral new particle formation, which converts most of the injected H2SO4 vapor to particles. Coagulation in the aging and diluting plumes governs the subsequent evolution to a narrow (σg = 1.3) particle size distribution. Scavenging by exhaust soot is negligible, but scavenging by acid impurities or incomplete H2SO4 evaporation in the hot exhaust plume and enhanced background aerosols can matter. This research highlights the need to obtain laboratory and/or real-world experiment data to verify the model prediction.

Investigating the spatial distribution of volatile organic compounds in aircraft cabins from various emission sources.

Volatile organic compounds (VOCs) significantly affect the air quality in aircraft cabins, consequently affecting passenger health and comfort. Although VOC emission sources and their contributions have been studied extensively, the distribution characteristics of VOCs originating from diverse sources within cabins have received limited attention, and the correlation between VOC sources and concentrations in passenger breathing zones remains largely unexplored. To fill this knowledge gap, the concentration field of VOCs was investigated using a computational fluid dynamics model, and the results were experimentally validated in a typical single-aisle aircraft cabin with seven seat rows. The diffusion characteristics of different VOCs emitted by four typical sources in aircraft cabins (floors, human surfaces, seats, and respiratory sources) were analyzed and compared. The distribution of VOCs emitted by different sources was nonuniform and could be classified into two distinct categories. When the emission intensities of all sources were equal, the average concentration of VOCs emitted from the floor source were considerably lower in the passenger breathing zone (4.01 µg/m³) than those emitted from the human surface, seat, and respiratory sources, which exhibited approximately equal concentrations (6.82, 6.90, and 7.29 µg/m³, respectively). The analysis highlighted that the simplified lumped-parameter method could not accurately estimate the exposure concentrations within an aircraft cabin. To address this issue, we propose a correction method based on the emission intensity of each VOC source. This study provides critical insights into the diffusion characteristics of VOCs within aircraft cabins and VOC emissions from various sources.

Long-term exposure to transportation noise and diabetes mellitus mortality: a national cohort study and updated meta-analysis.

BACKGROUND: Long-term exposure to transportation noise is related to cardio-metabolic diseases, with more recent evidence also showing associations with diabetes mellitus (DM) incidence. This study aimed to evaluate the association between transportation noise and DM mortality within the Swiss National Cohort. METHODS: During 15 years of follow-up (2001-2015; 4.14 million adults), over 72,000 DM deaths were accrued. Source-specific noise was calculated at residential locations, considering moving history. Multi-exposure, time-varying Cox regression was used to derive hazard ratios (HR, and 95%-confidence intervals). Models included road traffic, railway and aircraft noise, air pollution, and individual and area-level covariates including socio-economic position. Analyses included exposure-response modelling, effect modification, and a subset analysis around airports. The main findings were integrated into meta-analyses with published studies on mortality and incidence (separately and combined). RESULTS: HRs were 1.06 (1.05, 1.07), 1.02 (1.01, 1.03) and 1.01 (0.99, 1.02) per 10 dB day evening-night level (Lden) road traffic, railway and aircraft noise, respectively (adjusted model, including NO2). Splines suggested a threshold for road traffic noise (~ 46 dB Lden, well below the 53 dB Lden WHO guideline level), but not railway noise. Substituting for PM2.5, or including deaths with type 1 DM hardly changed the associations. HRs were higher for males compared to females, and in younger compared to older adults. Focusing only on type 1 DM showed an independent association with road traffic noise. Meta-analysis was only possible for road traffic noise in relation to mortality (1.08 [0.99, 1.18] per 10 dB, n = 4), with the point estimate broadly similar to that for incidence (1.07 [1.05, 1.09] per 10 dB, n = 10). Combining incidence and mortality studies indicated positive associations for each source, strongest for road traffic noise (1.07 [1.05, 1.08], 1.02 [1.01, 1.03], and 1.02 [1.00, 1.03] per 10 dB road traffic [n = 14], railway [n = 5] and aircraft noise [n = 5], respectively). CONCLUSIONS: This study provides new evidence that transportation noise is associated with diabetes mortality. With the growing evidence and large disease burden, DM should be viewed as an important outcome in the noise and health discussion.

Inter hospital transfers in rotor wing aircraft. Patterns and challenges. Protocol for a scoping review.

BACKGROUND: Inter-hospital transfer is necessary for the transport of patients to specialized treatment. Rotor-wing aircraft may be used in lieu of ambulances in time-critical conditions over long distances and when specialist team skills are called for. The purpose of the review is to assess the current scientific literature that describes the scenario to develop a national guideline for inter-hospital transfers using rotor-wing aircraft. The aim is to describe the patterns and challenges. METHODS AND ANALYSIS: The authors will conduct a scoping review as per Joanna Briggs Institute guideline. The protocol for the scoping review will adhere to the Open Science Framework guideline for scoping reviews and we will report the findings of the scoping review as per PRISMA-ScR guideline. We have developed the search strategy with the help of a research librarian and will conduct search in relevant electronic databases and include gray literature as well, using the PRESS and PRISMA-S guidelines. Two authors will independently screen titles and abstracts for inclusion as per eligibility criteria and conflicts will be resolved by a third reviewer. Full text retrieval will be conducted accordingly. We will analyze the extracted data using validated statistical methods. ETHICS AND DISSEMINATION: According to Danish law, scoping reviews are exempt from ethics committee approval. The findings of this scoping review will provide the scientific foundation for a national guideline on rotor-wing aircraft conveyed inter-hospital transfers in Denmark. Furthermore, we will publish the results of the scoping review in a relevant scientific journal.

Evaluation of methods for characterizing the fine particulate matter emissions from aircraft and other diffusion flame combustion aerosol sources.

The U. S. Environmental Protection Agency in collaboration with the U. S. Air Force Arnold Engineering Development Complex conducted the VAriable Response In Aircraft nvPM Testing (VARIAnT) 3 and 4 test campaigns to compare nonvolatile particulate matter (nvPM) emissions measurements from a variety of diffusion flame combustion aerosol sources (DFCASs), including a Cummins diesel engine, a diesel powered generator, two gas turbine start carts, a J85-GE-5 turbojet engine burning multiple fuels, and a Mini-CAST soot generator. The VARIAnT research program was devised to understand reported variability in the ARP6320A sampling system nvPM measurements. The VARIAnT research program has conducted four test campaigns to date with the VARIAnT 3 and 4 campaigns devoted to: (1) assessing the response of three different black carbon mass analyzers to particles of different size, morphology, and chemical composition; (2) characterizing the particles generated by 6 different combustion sources according to morphology, effective density, and chemical composition; and (3) assessing any significant difference between black carbon as determined by the 3 mass analyzers and the total PM determined via other techniques. Results from VARIAnT 3 and 4 campaigns revealed agreement of about 20% between the Micro-Soot Sensor, the Cavity Attenuated Phase Shift (CAPS PMSSA) monitor and the thermal-optical reference method for elemental carbon (EC) mass, independent of the calibration source used. For the LII-300, the measured mass concentrations in VARIAnT 3 fall within 18% and in VARIAnT 4 fall within 27% of the reference EC mass concentration when calibrated on a combustor rig in VARIAnT 3 and on an LGT-60 start cart in VARIAnT 4, respectively. It was also found that the three mass instrument types (MSS, CAPS PMSSA, and LII-300) can exhibit different BC to reference EC ratios depending on the emission source that appear to correlate to particle geometric mean mobility diameter, morphology, or some other parameter associated with particle geometric mean diameter (GMD) with the LII-300 showing a slightly stronger apparent trend with GMD. Systematic differences in LII-300 measured mass concentrations have been reduced by calibrating with a turbine combustion as a particle source (combustor or turbine engine). With respect to the particle size measurements, the sizing instruments (TSI SMPS, TSI EEPS, and Cambustion DMS 500) were found to be in general agreement in terms of size distributions and concentrations with some exceptions. Gravimetric measurements of the total aerosol mass produced by the various DFCAs differed from the reference EC, BC and integrated particle size distribution measured aerosol masses. The measurements of particle size distributions and single particle analysis performed using the miniSPLAT indicated the presence of larger particles (≳150 nm) having more compact morphologies, higher effective density, and a composition dominated by OC and containing ash. This increased large particle fraction is also associated with higher values of single scattering albedo measured by the CAPS PMSSA instrument and higher OC measurements. These measurements indicate gas turbine engine emissions can be a more heterogeneous mix of particle types beyond the original E-31 assumption that engine exit exhaust particles are mainly composed of black carbon.

Modelling Inductive Sensors for Arc Fault Detection in Aviation.

Modern aircraft are being equipped with high-voltage and direct current (HVDC) architectures to address the increase in electrical power. Unfortunately, the rise of voltage in low pressure environments brings about a problem with unexpected ionisation phenomena such as arcing. Series arcs in HVDC cannot be detected with conventional means, and finding methods to avoid the potentially catastrophic hazards of these events becomes critical to assure further development of more electric and all electric aviation. Inductive sensors are one of the most promising detectors in terms of sensitivity, cost, weight and adaptability to the circuit wiring in aircraft electric systems. In particular, the solutions based on the detection of the high-frequency (HF) pulses created by the arc have been found to be good candidates in practical applications. This paper proposes a method for designing series arc fault inductive sensors able to capture the aforementioned HF pulses. The methodology relies on modelling the parameters of the sensor based on the physics that intervenes in the HF pulses interaction with the sensor itself. To this end, a comparative analysis with different topologies is carried out. For every approach, the key parameters influencing the HF pulses detection are studied theoretically, modelled with a finite elements method and tested in the laboratory in terms of frequency response. The final validation tests were conducted using the prototypes in real cases of detection of DC series arcs.

LESM-YOLO: An Improved Aircraft Ducts Defect Detection Model.

Aircraft ducts play an indispensable role in various systems of an aircraft. The regular inspection and maintenance of aircraft ducts are of great significance for preventing potential failures and ensuring the normal operation of the aircraft. Traditional manual inspection methods are costly and inefficient, especially under low-light conditions. To address these issues, we propose a new defect detection model called LESM-YOLO. In this study, we integrate a lighting enhancement module to improve the accuracy and recognition of the model under low-light conditions. Additionally, to reduce the model's parameter count, we employ space-to-depth convolution, making the model more lightweight and suitable for deployment on edge detection devices. Furthermore, we introduce Mixed Local Channel Attention (MLCA), which balances complexity and accuracy by combining local channel and spatial attention mechanisms, enhancing the overall performance of the model and improving the accuracy and robustness of defect detection. Finally, we compare the proposed model with other existing models to validate the effectiveness of LESM-YOLO. The test results show that our proposed model achieves an mAP of 96.3%, a 5.4% improvement over the original model, while maintaining a detection speed of 138.7, meeting real-time monitoring requirements. The model proposed in this paper provides valuable technical support for the detection of dark defects in aircraft ducts.

Enhancing Aircraft Safety through Advanced Engine Health Monitoring with Long Short-Term Memory.

Predictive maintenance holds a crucial role in various industries such as the automotive, aviation and factory automation industries when it comes to expensive engine upkeep. Predicting engine maintenance intervals is vital for devising effective business management strategies, enhancing occupational safety and optimising efficiency. To achieve predictive maintenance, engine sensor data are harnessed to assess the wear and tear of engines. In this research, a Long Short-Term Memory (LSTM) architecture was employed to forecast the remaining lifespan of aircraft engines. The LSTM model was evaluated using the NASA Turbofan Engine Corruption Simulation dataset and its performance was benchmarked against alternative methodologies. The results of these applications demonstrated exceptional outcomes, with the LSTM model achieving the highest classification accuracy at 98.916% and the lowest mean average absolute error at 1.284%.

Robust Point Cloud Registration for Aircraft Engine Pipeline Systems.

Aircraft engine systems are composed of numerous pipelines. It is crucial to regularly inspect these pipelines to detect any damages or failures that could potentially lead to serious accidents. The inspection process typically involves capturing complete 3D point clouds of the pipelines using 3D scanning techniques from multiple viewpoints. To obtain a complete and accurate representation of the aircraft pipeline system, it is necessary to register and align the individual point clouds acquired from different views. However, the structures of aircraft pipelines often appear similar from different viewpoints, and the scanning process is prone to occlusions, resulting in incomplete point cloud data. The occlusions pose a challenge for existing registration methods, as they can lead to missing or wrong correspondences. To this end, we present a novel registration framework specifically designed for aircraft pipeline scenes. The proposed framework consists of two main steps. First, we extract the point feature structure of the pipeline axis by leveraging the cylindrical characteristics observed between adjacent blocks. Then, we design a new 3D descriptor called PL-PPFs (Point Line-Point Pair Features), which combines information from both the pipeline features and the engine assembly line features within the aircraft pipeline point cloud. By incorporating these relevant features, our descriptor enables accurate identification of the structure of the engine's piping system. Experimental results demonstrate the effectiveness of our approach on aircraft engine pipeline point cloud data.

Aircraft Engine Fault Diagnosis Model Based on 1DCNN-BiLSTM with CBAM.

As the operational status of aircraft engines evolves, their fault modes also undergo changes. In response to the operational degradation trend of aircraft engines, this paper proposes an aircraft engine fault diagnosis model based on 1DCNN-BiLSTM with CBAM. The model can be directly applied to raw monitoring data without the need for additional algorithms to extract fault degradation features. It fully leverages the advantages of 1DCNN in extracting local features along the spatial dimension and incorporates CBAM, a channel and spatial attention mechanism. CBAM could assign higher weights to features relevant to fault categories and make the model pay more attention to them. Subsequently, it utilizes BiLSTM to handle nonlinear time feature sequences and bidirectional contextual feature information. Finally, experimental validation is conducted on the publicly available CMAPSS dataset from NASA, categorizing fault modes into three types: faultless, HPC fault (the single fault), and HPC&Fan fault (the mixed fault). Comparative analysis with other models reveals that the proposed model has a higher classification accuracy, which is of practical significance in improving the reliability of aircraft engine operations and for Remaining Useful Life (RUL) prediction.

Research on Lateral Safety Spacing for Fusion Operation Based on Unmanned and Manned Aircraft-Event Modeling.

With the rapid development of unmanned aerial vehicle technology and its increasing application across various fields, current airspace resources are insufficient for unmanned aerial vehicles' needs. This paper, taking Zigong General Aviation Airport in Sichuan as a case study, explores the lateral safety spacing in a mixed operation mode of unmanned aerial vehicles and manned aircraft. Currently, there are no standardized regulations for the safe spacing of the fusion operation of unmanned and manned aircraft. Theoretical research is essential to provide a reference for actual operations. It introduces the UM-Event (unmanned and manned aircraft-event) collision risk model, an adaptation of the Event collision risk model, considering factors like communication, navigation, surveillance performance, human factors, collision avoidance equipment performance, and meteorology. Safety spacing was determined via simulation experiments and actual data analysis, adhering to the target safety level (TSL). Findings indicate that surveillance performance has a minor impact on safety spacing, while communication and navigation significantly influence it. The safety spacing, influenced solely by CNS (communication performance, navigation performance, surveillance performance) and combined factors, increased from 4.42 to 4.47 nautical miles. These results offer theoretical guidance for unmanned aerial vehicle safety in non-segregated airspace.

Research on Alternating Current Field Measurement Method for Buried Defects of Titanium Alloy Aircraft Skin.

Titanium alloys are extensively used in the manufacturing of key components in aerospace engines and aircraft structures due to their excellent properties. However, aircraft skins in harsh operating environments are subjected to long-term corrosion and pressure concentrations, which can lead to the formation of cracks and other defects. In this paper, a detection probe is designed based on the principle of alternating current field measurement, which can effectively detect both surface and buried defects in thin-walled titanium alloy plates. A finite element simulation model of alternating current field measurement detection for buried defects in thin-walled TC4 titanium alloy plates is established using COMSOL 5.6 software. The influence of defect length, depth, and excitation frequency on the characteristic signals is investigated, and the detection probe is optimized. Simulation and experimental results demonstrate that the proposed detection probe exhibits high detection sensitivity to varying lengths and depths of buried defects, and can detect small cracks with a length of 3 mm and a burial depth of 2 mm, as well as deep defects with a length of 10 mm and a burial depth of 4 mm. The feasibility of this probe for detecting buried defects in titanium alloy aircraft skin is confirmed.

A Two-Stage Attention-Based Hierarchical Transformer for Turbofan Engine Remaining Useful Life Prediction.

The accurate estimation of the remaining useful life (RUL) for aircraft engines is essential for ensuring safety and uninterrupted operations in the aviation industry. Numerous investigations have leveraged the success of the attention-based Transformer architecture in sequence modeling tasks, particularly in its application to RUL prediction. These studies primarily focus on utilizing onboard sensor readings as input predictors. While various Transformer-based approaches have demonstrated improvement in RUL predictions, their exclusive focus on temporal attention within multivariate time series sensor readings, without considering sensor-wise attention, raises concerns about potential inaccuracies in RUL predictions. To address this concern, our paper proposes a novel solution in the form of a two-stage attention-based hierarchical Transformer (STAR) framework. This approach incorporates a two-stage attention mechanism, systematically addressing both temporal and sensor-wise attentions. Furthermore, we enhance the STAR RUL prediction framework by integrating hierarchical encoder-decoder structures to capture valuable information across different time scales. By conducting extensive numerical experiments with the CMAPSS datasets, we demonstrate that our proposed STAR framework significantly outperforms the current state-of-the-art models for RUL prediction.

Research on the Collision Risk of Fusion Operation of Manned Aircraft and Unmanned Aircraft at Zigong Airport.

Low-altitude airspace is developing rapidly, but the utilization rate of airspace resources is low. Therefore, in order to solve the problem of the safe operation of the fusion of large UAVs and manned aircraft in the same airspace, this paper analyzes the theoretical calculation of the collision risk of the fusion operation of manned aircraft and UAVs at Feng Ming Airport in Zigong, verifying that while assessing the safety spacing of 10 km in the lateral direction, it further simulates the possibility of calculating the theoretical smaller safety spacing. The study will propose a new theory of error spacing safety margin and improve it according to the traditional Event collision risk model, combining the error spacing safety margin to establish an improved collision model more suitable for the fusion operation of manned and unmanned aircraft and reduce the redundancy of calculation. The error factors affecting manned and unmanned aircraft at Zigong Airport are analyzed, and theoretical calculations are analyzed by combining the actual data of Zigong Airport. Finally, the Monte Carlo simulation method is used to solve the error, substitute the calculation results, and simulate a section of the trajectory of the fusion operation for the reverse argument. The theoretical calculation results show that the collision risk from 10 km to 8 km satisfies the lateral target safety level (TSL) specified by ICAO under both traditional and improved models. The collision risk calculated by the improved model incorporating the error spacing safety margin is smaller, which enhances the safety of the model calculations. The results of the study can provide theoretical references for the fusion operation of manned and unmanned aircraft.

Designing a Surveillance Sensor Network with Information Clearinghouse for Advanced Air Mobility.

To ensure safe, secure, and efficient advanced air mobility (AAM) operations, an AAM surveillance network is needed to detect and track AAM traffic. Additionally, a cloud-based surveillance data collection, monitoring, and distribution center is needed, where AAM operators and service suppliers, law enforcement agencies, correctional facilities, and municipalities can subscribe to receiving relevant AAM traffic data to plan and monitor AAM operations. In this work, we developed an optimization model to design a surveillance sensor network for AAM that minimizes the total sensor cost while providing full coverage in the desired region of operation, considering terrain types of that region, terrain-based sensor detection probabilities, and meeting the minimum detection probability requirement. Moreover, we present a framework for the low altitude surveillance information clearinghouse (LASIC), connected to the optimized AAM surveillance network for receiving live surveillance feed. Additionally, we conducted a cost-benefit analysis of the AAM surveillance network and LASIC to justify an investment in it. We examine six potential types of AAM sensors and homogeneous and heterogeneous network types. Our analysis reveals the sensor types that are the most profitable options for detecting cooperative and non-cooperative aircraft. According to the findings, heterogeneous networks are more cost-effective than homogeneous sensor networks. Based on the sensitivity analysis, changes in parameters such as subscription fees, the number of subscribers, sensor detection probabilities, and the minimum required detection probability significantly impact the surveillance network design and cost-benefit analysis.

Sensor Fault Reconstruction Using Robustly Adaptive Unknown-Input Observers.

Sensors are a key component in industrial automation systems. A fault or malfunction in sensors may degrade control system performance. An engineering system model is usually disturbed by input uncertainties, which brings a challenge for monitoring, diagnosis, and control. In this study, a novel estimation technique, called adaptive unknown-input observer, is proposed to simultaneously reconstruct sensor faults as well as system states. Specifically, the unknown input observer is used to decouple partial disturbances, the un-decoupled disturbances are attenuated by the optimization using linear matrix inequalities, and the adaptive technique is explored to track sensor faults. As a result, a robust reconstruction of the sensor fault as well as system states is then achieved. Furthermore, the proposed robustly adaptive fault reconstruction technique is extended to Lipschitz nonlinear systems subjected to sensor faults and unknown input uncertainties. Finally, the effectiveness of the algorithms is demonstrated using an aircraft system model and robotic arm and comparison studies.

Communication Strategies in Human-Autonomy Teams During Technological Failures.

OBJECTIVE: This study examines low-, medium-, and high-performing Human-Autonomy Teams' (HATs') communication strategies during various technological failures that impact routine communication strategies to adapt to the task environment. BACKGROUND: Teams must adapt their communication strategies during dynamic tasks, where more successful teams make more substantial adaptations. Adaptations in communication strategies may explain how successful HATs overcome technological failures. Further, technological failures of variable severity may alter communication strategies of HATs at different performance levels in their attempts to overcome each failure. METHOD: HATs in a Remotely Piloted Aircraft System-Synthetic Task Environment (RPAS-STE), involving three team members, were tasked with photographing targets. Each triad had two randomly assigned participants in navigator and photographer roles, teaming with an experimenter who simulated an AI pilot in a Wizard of Oz paradigm. Teams encountered two different technological failures, automation and autonomy, where autonomy failures were more challenging to overcome. RESULTS: High-performing HATs calibrated their communication strategy to the complexity of the different failures better than medium- and low-performing teams. Further, HATs adjusted their communication strategies over time. Finally, only the most severe failures required teams to increase the efficiency of their communication. CONCLUSION: HAT effectiveness under degraded conditions depends on the type of communication strategies enacted by the team. Previous findings from studies of all-human teams apply here; however, novel results suggest information requests are particularly important to HAT success during failures. APPLICATION: Understanding the communication strategies of HATs under degraded conditions can inform training protocols to help HATs overcome failures.

Effects of Ultraviolet-C Radiation Exposure on Aircraft Cabin Materials.

Ultraviolet-C (UV-C) radiation exposure is an attractive option for rapid and consistent disinfection of interior surfaces in aircraft cabins. In this study, fabric and plastic materials commonly used in aircraft cabins were exposed to UV-C radiation to determine their sensitivity to cumulative damage from frequent application. No significant effect on flame retardancy occurred up to 269 J/cm2 dose, and no effect on tensile or tear strength occurred up to 191 J/cm2 . Changes in color or appearance can occur at lower doses. A limit of 40 J/cm2 is proposed to avoid perceptible changes in appearance.