Machine learning aided single cell image analysis improves understanding of morphometric heterogeneity of human mesenchymal stem cells.

The multipotent stem cells of our body have been largely harnessed in biotherapeutics. However, as they are derived from multiple anatomical sources, from different tissues, human mesenchymal stem cells (hMSCs) are a heterogeneous population showing ambiguity in their in vitro behavior. Intra-clonal population heterogeneity has also been identified and pre-clinical mechanistic studies suggest that these cumulatively depreciate the therapeutic effects of hMSC transplantation. Although various biomarkers identify these specific stem cell populations, recent artificial intelligence-based methods have capitalized on the cellular morphologies of hMSCs, opening a new approach to understand their attributes. A robust and rapid platform is required to accommodate and eliminate the heterogeneity observed in the cell population, to standardize the quality of hMSC therapeutics globally. Here, we report our primary findings of morphological heterogeneity observed within and across two sources of hMSCs namely, stem cells from human exfoliated deciduous teeth (SHEDs) and human Wharton jelly mesenchymal stem cells (hWJ MSCs), using real-time single-cell images generated on immunophenotyping by imaging flow cytometry (IFC). We used the ImageJ software for identification and comparison between the two types of hMSCs using statistically significant morphometric descriptors that are biologically relevant. To expand on these insights, we have further applied deep learning methods and successfully report the development of a Convolutional Neural Network-based image classifier. In our research, we introduced a machine learning methodology to streamline the entire procedure, utilizing convolutional neural networks and transfer learning for binary classification, achieving an accuracy rate of 97.54%. We have also critically discussed the challenges, comparisons between solutions and future directions of machine learning in hMSC classification in biotherapeutics.

Machine/deep learning-assisted hemoglobin level prediction using palpebral conjunctival images.

Palpebral conjunctival hue alteration is used in non-invasive screening for anaemia, whereas it is a qualitative measure. This study constructed machine/deep learning models for predicting haemoglobin values using 150 palpebral conjunctival images taken by a smartphone. The median haemoglobin value was 13.1 g/dL, including 10 patients with <11 g/dL. A segmentation model using U-net was successfully constructed. The segmented images were subjected to non-convolutional neural network (CNN)-based and CNN-based regression models for predicting haemoglobin values. The correlation coefficients between the actual and predicted haemoglobin values were 0.38 and 0.44 in the non-CNN-based and CNN-based models, respectively. The sensitivity and specificity for anaemia detection were 13% and 98% for the non-CNN-based model and 20% and 99% for the CNN-based model. The performance of the CNN-based model did not improve with a mask layer guiding the model's attention towards the conjunctival regions, however, slightly improved with correction by the aspect ratio and exposure time of input images. The gradient-weighted class activation mapping heatmap indicated that the lower half area of the conjunctiva was crucial for haemoglobin value prediction. In conclusion, the CNN-based model had better results than the non-CNN-based model. The prediction accuracy would improve by using more input data with anaemia.

Technological Vanguard: the outstanding performance of the LTY-CNN model for the early prediction of epileptic seizures.

BACKGROUND: Epilepsy is a common neurological disorder that affects approximately 60 million people worldwide. Characterized by unpredictable neural electrical activity abnormalities, it results in seizures with varying intensity levels. Electroencephalography (EEG), as a crucial technology for monitoring and predicting epileptic seizures, plays an essential role in improving the quality of life for people with epilepsy. METHOD: This study introduces an innovative deep learning model, a lightweight triscale yielding convolutional neural network" (LTY-CNN), that is specifically designed for EEG signal analysis. The model integrates a parallel convolutional structure with a multihead attention mechanism to capture complex EEG signal features across multiple scales and enhance the efficiency achieved when processing time series data. The lightweight design of the LTY-CNN enables it to maintain high performance in environments with limited computational resources while preserving the interpretability and maintainability of the model. RESULTS: In tests conducted on the SWEC-ETHZ and CHB-MIT datasets, the LTY-CNN demonstrated outstanding performance. On the SWEC-ETHZ dataset, the LTY-CNN achieved an accuracy of 99.9%, an area under the receiver operating characteristic curve (AUROC) of 0.99, a sensitivity of 99.9%, and a specificity of 98.8%. Furthermore, on the CHB-MIT dataset, it recorded an accuracy of 99%, an AUROC of 0.932, a sensitivity of 99.1%, and a specificity of 93.2%. These results signify the remarkable ability of the LTY-CNN to distinguish between epileptic seizures and nonseizure events. Compared to other existing epilepsy detection classifiers, the LTY-CNN attained higher accuracy and sensitivity. CONCLUSION: The high accuracy and sensitivity of the LTY-CNN model demonstrate its significant potential for epilepsy management, particularly in terms of predicting and mitigating epileptic seizures. Its value in personalized treatments and widespread clinical applications reflects the broad prospects of deep learning in the health care sector. This also highlights the crucial role of technological innovation in enhancing the quality of life experienced by patients.

Improving Fire Detection Accuracy through Enhanced Convolutional Neural Networks and Contour Techniques.

In this study, a novel method combining contour analysis with deep CNN is applied for fire detection. The method was made for fire detection using two main algorithms: one which detects the color properties of the fires, and another which analyzes the shape through contour detection. To overcome the disadvantages of previous methods, we generate a new labeled dataset, which consists of small fire instances and complex scenarios. We elaborated the dataset by selecting regions of interest (ROI) for enhanced fictional small fires and complex environment traits extracted through color characteristics and contour analysis, to better train our model regarding those more intricate features. Results of the experiment showed that our improved CNN model outperformed other networks. The accuracy, precision, recall and F1 score were 99.4%, 99.3%, 99.4% and 99.5%, respectively. The performance of our new approach is enhanced in all metrics compared to the previous CNN model with an accuracy of 99.4%. In addition, our approach beats many other state-of-the-art methods as well: Dilated CNNs (98.1% accuracy), Faster R-CNN (97.8% accuracy) and ResNet (94.3%). This result suggests that the approach can be beneficial for a variety of safety and security applications ranging from home, business to industrial and outdoor settings.

Intelligent Fault Diagnosis of Rolling Element Bearings Based on Modified AlexNet.

The reliable and safe operation of industrial systems needs to detect and diagnose bearing faults as early as possible. Intelligent fault diagnostic systems that use deep learning convolutional neural network (CNN) techniques have achieved a great deal of success in recent years. In a traditional CNN, the fully connected layer is located in the final three layers, and such a layer consists of multiple layers that are all connected. However, the fully connected layer of the CNN has the disadvantage of too many training parameters, which makes the model training and testing time longer and incurs overfitting. Additionally, because the working load is constantly changing and noise from the place of operation is unavoidable, the efficiency of intelligent fault diagnosis techniques suffers great reductions. In this research, we propose a novel technique that can effectively solve the problem of traditional CNN and accurately identify the bearing fault. Firstly, the best pre-trained CNN model is identified by considering the classification's success rate for bearing fault diagnosis. Secondly, the selected CNN model is modified to effectively reduce the parameter quantities, overfitting, and calculating time of this model. Finally, the best classifier is identified to make a hybrid model concept to achieve the best performance. It is found that the proposed technique performs well under different load conditions, even in noisy environments, with variable signal-to-noise ratio (SNR) values. Our experimental results confirm that this proposed method is highly reliable and efficient in detecting and classifying bearing faults.

An Optimized Ensemble Deep Learning Model for Predicting Plant miRNA-IncRNA Based on Artificial Gorilla Troops Algorithm.

MicroRNAs (miRNA) are small, non-coding regulatory molecules whose effective alteration might result in abnormal gene manifestation in the downstream pathway of their target. miRNA gene variants can impact miRNA transcription, maturation, or target selectivity, impairing their usefulness in plant growth and stress responses. Simple Sequence Repeat (SSR) based on miRNA is a newly introduced functional marker that has recently been used in plant breeding. MicroRNA and long non-coding RNA (lncRNA) are two examples of non-coding RNA (ncRNA) that play a vital role in controlling the biological processes of animals and plants. According to recent studies, the major objective for decoding their functional activities is predicting the relationship between lncRNA and miRNA. Traditional feature-based classification systems' prediction accuracy and reliability are frequently harmed because of the small data size, human factors' limits, and huge quantity of noise. This paper proposes an optimized deep learning model built with Independently Recurrent Neural Networks (IndRNNs) and Convolutional Neural Networks (CNNs) to predict the interaction in plants between lncRNA and miRNA. The deep learning ensemble model automatically investigates the function characteristics of genetic sequences. The proposed model's main advantage is the enhanced accuracy in plant miRNA-IncRNA prediction due to optimal hyperparameter tuning, which is performed by the artificial Gorilla Troops Algorithm and the proposed intelligent preying algorithm. IndRNN is adapted to derive the representation of learned sequence dependencies and sequence features by overcoming the inaccuracies of natural factors in traditional feature architecture. Working with large-scale data, the suggested model outperforms the current deep learning model and shallow machine learning, notably for extended sequences, according to the findings of the experiments, where we obtained an accuracy of 97.7% in the proposed method.

A Novel FDLSR-Based Technique for View-Independent Vehicle Make and Model Recognition.

Vehicle make and model recognition (VMMR) is an important aspect of intelligent transportation systems (ITS). In VMMR systems, surveillance cameras capture vehicle images for real-time vehicle detection and recognition. These captured images pose challenges, including shadows, reflections, changes in weather and illumination, occlusions, and perspective distortion. Another significant challenge in VMMR is the multiclass classification. This scenario has two main categories: (a) multiplicity and (b) ambiguity. Multiplicity concerns the issue of different forms among car models manufactured by the same company, while the ambiguity problem arises when multiple models from the same manufacturer have visually similar appearances or when vehicle models of different makes have visually comparable rear/front views. This paper introduces a novel and robust VMMR model that can address the above-mentioned issues with accuracy comparable to state-of-the-art methods. Our proposed hybrid CNN model selects the best descriptive fine-grained features with the help of Fisher Discriminative Least Squares Regression (FDLSR). These features are extracted from a deep CNN model fine-tuned on the fine-grained vehicle datasets Stanford-196 and BoxCars21k. Using ResNet-152 features, our proposed model outperformed the SVM and FC layers in accuracy by 0.5% and 4% on Stanford-196 and 0.4 and 1% on BoxCars21k, respectively. Moreover, this model is well-suited for small-scale fine-grained vehicle datasets.

COVIDX-LwNet: A Lightweight Network Ensemble Model for the Detection of COVID-19 Based on Chest X-ray Images.

Recently, the COVID-19 pandemic coronavirus has put a lot of pressure on health systems around the world. One of the most common ways to detect COVID-19 is to use chest X-ray images, which have the advantage of being cheap and fast. However, in the early days of the COVID-19 outbreak, most studies applied pretrained convolutional neural network (CNN) models, and the features produced by the last convolutional layer were directly passed into the classification head. In this study, the proposed ensemble model consists of three lightweight networks, Xception, MobileNetV2 and NasNetMobile as three original feature extractors, and then three base classifiers are obtained by adding the coordinated attention module, LSTM and a new classification head to the original feature extractors. The classification results from the three base classifiers are then fused by a confidence fusion method. Three publicly available chest X-ray datasets for COVID-19 testing were considered, with ternary (COVID-19, normal and other pneumonia) and quaternary (COVID-19, normal) analyses performed on the first two datasets, bacterial pneumonia and viral pneumonia classification, and achieved high accuracy rates of 95.56% and 91.20%, respectively. The third dataset was used to compare the performance of the model compared to other models and the generalization ability on different datasets. We performed a thorough ablation study on the first dataset to understand the impact of each proposed component. Finally, we also performed visualizations. These saliency maps not only explain key prediction decisions of the model, but also help radiologists locate areas of infection. Through extensive experiments, it was finally found that the results obtained by the proposed method are comparable to the state-of-the-art methods.

Estimation of Stroke Volume Variance from Arterial Blood Pressure: Using a 1-D Convolutional Neural Network.

BACKGROUND: We aimed to create a novel model using a deep learning method to estimate stroke volume variation (SVV), a widely used predictor of fluid responsiveness, from arterial blood pressure waveform (ABPW). METHODS: In total, 557 patients and 8,512,564 SVV datasets were collected and were divided into three groups: training, validation, and test. Data was composed of 10 s of ABPW and corresponding SVV data recorded every 2 s. We built a convolutional neural network (CNN) model to estimate SVV from the ABPW with pre-existing commercialized model (EV1000) as a reference. We applied pre-processing, multichannel, and dimension reduction to improve the CNN model with diversified inputs. RESULTS: Our CNN model showed an acceptable performance with sample data (r = 0.91, MSE = 6.92). Diversification of inputs, such as normalization, frequency, and slope of ABPW significantly improved the model correlation (r = 0.95), lowered mean squared error (MSE = 2.13), and resulted in a high concordance rate (96.26%) with the SVV from the commercialized model. CONCLUSIONS: We developed a new CNN deep-learning model to estimate SVV. Our CNN model seems to be a viable alternative when the necessary medical device is not available, thereby allowing a wider range of application and resulting in optimal patient management.

Multi-Segmentation Parallel CNN Model for Estimating Assembly Torque Using Surface Electromyography Signals.

The precise application of tightening torque is one of the important measures to ensure accurate bolt connection and improvement in product assembly quality. Currently, due to the limited assembly space and efficiency, a wrench without the function of torque measurement is still an extensively used assembly tool. Therefore, wrench torque monitoring is one of the urgent problems that needs to be solved. This study proposes a multi-segmentation parallel convolution neural network (MSP-CNN) model for estimating assembly torque using surface electromyography (sEMG) signals, which is a method of torque monitoring through classification methods. The MSP-CNN model contains two independent CNN models with different or offset torque granularities, and their outputs are fused to obtain a finer classification granularity, thus improving the accuracy of torque estimation. First, a bolt tightening test bench is established to collect sEMG signals and tightening torque signals generated when the operator tightens various bolts using a wrench. Second, the sEMG and torque signals are preprocessed to generate the sEMG signal graphs. The range of the torque transducer is divided into several equal subdivision ranges according to different or offset granularities, and each subdivision range is used as a torque label for each torque signal. Then, the training set, verification set, and test set are established for torque monitoring to train the MSP-CNN model. The effects of different signal preprocessing methods, torque subdivision granularities, and pooling methods on the recognition accuracy and torque monitoring accuracy of a single CNN network are compared experimentally. The results show that compared to maximum pooling, average pooling can improve the accuracy of CNN torque classification and recognition. Moreover, the MSP-CNN model can improve the accuracy of torque monitoring as well as solve the problems of non-convergence and slow convergence of independent CNN network models.

Research on a three-dimensional radiation field reconstruction algorithm based on an improved 3D CNN.

This article investigates the application of an improved three-dimensional convolutional neural network (3D CNN) for sparse data-based reconstruction of radiation fields. Sparse radiation data points are consolidated into structured three-dimensional matrices and fed into a self-attention integrated CNN, enabling the network to interpolate and produce complete radiation distribution grids. The model's validity is assessed through experiments with randomly sourced radiation in scenarios both with and without shielding, as well as in refined grid configurations. Results indicate that in unshielded environments, a mere 5%(15 points) sampling yields an average relative error of 4%, while in shielded settings, a 7% (21 points) sampling maintains the error around 11%. In refined grid contexts, a 2% sampling rate suffices to limit the error to 6.58%. Thus, the improved 3D CNN is demonstrated to be highly effective for precise three-dimensional radiation field reconstruction in sparse data scenarios.

Innovative approaches for accurate ozone prediction and health risk analysis in South Korea: The combined effectiveness of deep learning and AirQ.

Short-term exposure to ground-level ozone (O3) poses significant health risks, particularly respiratory and cardiovascular diseases, and mortality. This study addresses the pressing need for accurate O3 forecasting to mitigate these risks, focusing on South Korea. We introduce Deep Bias Correction (Deep-BC), a novel framework leveraging Convolutional Neural Networks (CNNs), to refine hourly O3 forecasts from the Community Multiscale Air Quality (CMAQ) model. Our approach involves training Deep-BC using data from 2016 to 2019, including CMAQ's 72-hour O3 forecasts, 31 meteorological variables from the Weather Research and Forecasting (WRF) model, and previous days' station measurements of 6 air pollutants. Deep-BC significantly outperforms CMAQ in 2021, reducing biases in O3 forecasts. Furthermore, we utilize Deep-BC's daily maximum 8-hour average O3 (MDA8 O3) forecasts as input for the AirQ+ model to assess O3's potential impact on mortality across seven major provinces of South Korea: Seoul, Busan, Daegu, Incheon, Daejeon, Ulsan, and Sejong. Short-term O3 exposure is associated with 0.40 % to 0.48 % of natural cause and respiratory deaths and 0.67 % to 0.81 % of cardiovascular deaths. Gender-specific analysis reveals higher mortality rates among men, particularly from respiratory causes. Our findings underscore the critical need for region-specific interventions to address air pollution's detrimental effects on public health in South Korea. By providing improved O3 predictions and quantifying its impact on mortality, this research offers valuable insights for formulating targeted strategies to mitigate air pollution's adverse effects. Moreover, we highlight the urgency of proactive measures in health policies, emphasizing the significance of accurate forecasting and effective interventions to safeguard public health from the deleterious effects of air pollution.

Research on sports image classification method based on SE-RES-CNN model.

As computer image processing and digital technologies advance, creating an efficient method for classifying sports images is crucial for the rapid retrieval and management of large image datasets. Traditional manual methods for classifying sports images are impractical for large-scale data and often inaccurate when distinguishing similar images. This paper introduces an SE module that adaptively adjusts the weights of input feature mapping channels, and a Res module that excels in deep feature extraction, preventing gradient vanishing, multi-scale processing, and enhancing generalization in image recognition. Through extensive experimentation on network structure adjustments, the SE-RES-CNN neural network model is applied to sports image classification. The model is trained on a sports image classification dataset from Kaggle, alongside VGG-16 and ResNet50 models. Training results show that the proposed SE-RES-CNN model improves classification accuracy by approximately 5% compared to VGG-16 and ResNet50 models. Testing revealed that the SE-RES-CNN model classifies 100 out of 500 sports images in 6 s, achieving an accuracy rate of up to 98% and a single prediction time of 0.012 s. This validates the model's accuracy and effectiveness, significantly enhancing sports image retrieval and classification efficiency. This validates the model's accuracy and effectiveness, significantly enhancing sports image retrieval and classification efficiency.

Recognition of aggressive driving behavior under abnormal weather based on Convolutional Neural Network and transfer learning.

OBJECTIVES: Aggressive driving behavior can lead to potential traffic collision risks, and abnormal weather conditions can exacerbate this behavior. This study aims to develop recognition models for aggressive driving under various climate conditions, addressing the challenge of collecting sufficient data in abnormal weather. METHODS: Driving data was collected in a virtual environment using a driving simulator under both normal and abnormal weather conditions. A model was trained on data from normal weather (source domain) and then transferred to foggy and rainy weather conditions (target domains) for retraining and fine-tuning. The K-means algorithm clustered driving behavior instances into three styles: aggressive, normal, and cautious. These clusters were used as labels for each instance in training a CNN model. The pre-trained CNN model was then transferred and fine-tuned for abnormal weather conditions. RESULTS: The transferred models showed improved recognition performance, achieving an accuracy score of 0.81 in both foggy and rainy weather conditions. This surpassed the non-transferred models' accuracy scores of 0.72 and 0.69, respectively. CONCLUSIONS: The study demonstrates the significant application value of transfer learning in recognizing aggressive driving behaviors with limited data. It also highlights the feasibility of using this approach to address the challenges of driving behavior recognition under abnormal weather conditions.

Detection and Identification of Pesticides in Fruits Coupling to an Au-Au Nanorod Array SERS Substrate and RF-1D-CNN Model Analysis.

In this research, a method was developed for fabricating Au-Au nanorod array substrates through the deposition of large-area Au nanostructures on an Au nanorod array using a galvanic cell reaction. The incorporation of a granular structure enhanced both the number and intensity of surface-enhanced Raman scattering (SERS) hot spots on the substrate, thereby elevating the SERS performance beyond that of substrates composed solely of an Au nanorod. Calculations using the finite difference time domain method confirmed the generation of a strong electromagnetic field around the nanoparticles. Motivated by the electromotive force, Au ions in the chloroauric acid solution were reduced to form nanostructures on the nanorod array. The size and distribution density of these granular nanostructures could be modulated by varying the reaction time and the concentration of chloroauric acid. The resulting Au-Au nanorod array substrate exhibited an active, uniform, and reproducible SERS effect. With 1,2-bis(4-pyridyl)ethylene as the probe molecule, the detection sensitivity of the Au-Au nanorod array substrate was enhanced to 10-11 M, improving by five orders of magnitude over the substrate consisting only of an Au nanorod array. For a practical application, this substrate was utilized for the detection of pesticides, including thiram, thiabendazole, carbendazim, and phosmet, within the concentration range of 10-4 to 5 × 10-7 M. An analytical model combining a random forest and a one-dimensional convolutional neural network, referring to the important variable-one-dimensional convolutional neural network model, was developed for the precise identification of thiram. This approach demonstrated significant potential for biochemical sensing and rapid on-site identification.

A Hybrid Deep Learning CNN model for COVID-19 detection from chest X-rays.

Coronavirus disease (COVID-2019) is emerging in Wuhan, China in 2019. It has spread throughout the world since the year 2020. Millions of people were affected and caused death to them till now. To avoid the spreading of COVID-2019, various precautions and restrictions have been taken by all nations. At the same time, infected persons are needed to identify and isolate, and medical treatment should be provided to them. Due to a deficient number of Reverse Transcription Polymerase Chain Reaction (RT-PCR) tests, a Chest X-ray image is becoming an effective technique for diagnosing COVID-19. In this work, the Hybrid Deep Learning CNN model is proposed for the diagnosis COVID-19 using chest X-rays. The proposed model consists of a heading model and a base model. The base model utilizes two pre-trained deep learning structures such as VGG16 and VGG19. The feature dimensions from these pre-trained models are reduced by incorporating different pooling layers, such as max and average. In the heading part, dense layers of size three with different activation functions are also added. A dropout layer is supplemented to avoid overfitting. The experimental analyses are conducted to identify the efficacy of the proposed hybrid deep learning with existing transfer learning architectures such as VGG16, VGG19, EfficientNetB0 and ResNet50 using a COVID-19 radiology database. Various classification techniques, such as K-Nearest Neighbor (KNN), Naive Bayes, Random Forest, Support Vector Machine (SVM), and Neural Network, were also used for the performance comparison of the proposed model. The hybrid deep learning model with average pooling layers, along with SVM-linear and neural networks, both achieved an accuracy of 92%.These proposed models can be employed to assist radiologists and physicians in avoiding misdiagnosis rates and to validate the positive COVID-19 infected cases.

Detection of Lung Opacity and Treatment Planning with Three-Channel Fusion CNN Model.

Lung opacities are extremely important for physicians to monitor and can have irreversible consequences for patients if misdiagnosed or confused with other findings. Therefore, long-term monitoring of the regions of lung opacity is recommended by physicians. Tracking the regional dimensions of images and classifying differences from other lung cases can provide significant ease to physicians. Deep learning methods can be easily used for the detection, classification, and segmentation of lung opacity. In this study, a three-channel fusion CNN model is applied to effectively detect lung opacity on a balanced dataset compiled from public datasets. The MobileNetV2 architecture is used in the first channel, the InceptionV3 model in the second channel, and the VGG19 architecture in the third channel. The ResNet architecture is used for feature transfer from the previous layer to the current layer. In addition to being easy to implement, the proposed approach can also provide significant cost and time advantages to physicians. Our accuracy values for two, three, four, and five classes on the newly compiled dataset for lung opacity classifications are found to be 92.52%, 92.44%, 87.12%, and 91.71%, respectively.

Brain Tumor Segmentation Using Deep Learning on MRI Images.

Brain tumor (BT) diagnosis is a lengthy process, and great skill and expertise are required from radiologists. As the number of patients has expanded, so has the amount of data to be processed, making previous techniques both costly and ineffective. Many academics have examined a range of reliable and quick techniques for identifying and categorizing BTs. Recently, deep learning (DL) methods have gained popularity for creating computer algorithms that can quickly and reliably diagnose or segment BTs. To identify BTs in medical images, DL permits a pre-trained convolutional neural network (CNN) model. The suggested magnetic resonance imaging (MRI) images of BTs are included in the BT segmentation dataset, which was created as a benchmark for developing and evaluating algorithms for BT segmentation and diagnosis. There are 335 annotated MRI images in the collection. For the purpose of developing and testing BT segmentation and diagnosis algorithms, the brain tumor segmentation (BraTS) dataset was produced. A deep CNN was also utilized in the model-building process for segmenting BTs using the BraTS dataset. To train the model, a categorical cross-entropy loss function and an optimizer, such as Adam, were employed. Finally, the model's output successfully identified and segmented BTs in the dataset, attaining a validation accuracy of 98%.

Deep learning-based identification of sinoatrial node-like pacemaker cells from SHOX2/HCN4 double-positive cells differentiated from human iPS cells.

Background: Cardiomyocytes derived from human iPS cells (hiPSCs) include cells showing SAN- and non-SAN-type spontaneous APs. Objectives: To examine whether the deep learning technology could identify hiPSC-derived SAN-like cells showing SAN-type-APs by their shape. Methods: We acquired phase-contrast images for hiPSC-derived SHOX2/HCN4 double-positive SAN-like and non-SAN-like cells and made a VGG16-based CNN model to classify an input image as SAN-like or non-SAN-like cell, compared to human discriminability. Results: All parameter values such as accuracy, recall, specificity, and precision obtained from the trained CNN model were higher than those of human classification. Conclusions: Deep learning technology could identify hiPSC-derived SAN-like cells with considerable accuracy.

An Ensemble of CNN Models for Parkinson's Disease Detection Using DaTscan Images.

Parkinson's Disease (PD) is a progressive central nervous system disorder that is caused due to the neural degeneration mainly in the substantia nigra in the brain. It is responsible for the decline of various motor functions due to the loss of dopamine-producing neurons. Tremors in hands is usually the initial symptom, followed by rigidity, bradykinesia, postural instability, and impaired balance. Proper diagnosis and preventive treatment can help patients improve their quality of life. We have proposed an ensemble of Deep Learning (DL) models to predict Parkinson's using DaTscan images. Initially, we have used four DL models, namely, VGG16, ResNet50, Inception-V3, and Xception, to classify Parkinson's disease. In the next stage, we have applied a Fuzzy Fusion logic-based ensemble approach to enhance the overall result of the classification model. The proposed model is assessed on a publicly available database provided by the Parkinson's Progression Markers Initiative (PPMI). The achieved recognition accuracy, Precision, Sensitivity, Specificity, F1-score from the proposed model are 98.45%, 98.84%, 98.84%, 97.67%, and 98.84%, respectively which are higher than the individual model. We have also developed a Graphical User Interface (GUI)-based software tool for public use that instantly detects all classes using Magnetic Resonance Imaging (MRI) with reasonable accuracy. The proposed method offers better performance compared to other state-of-the-art methods in detecting PD. The developed GUI-based software tool can play a significant role in detecting the disease in real-time.