Chemically coupling SnO2 quantum dots and MXene for efficient CO2 electroreduction to formate and Zn-CO2 battery.

Electrochemical conversion of CO2 into formate is a promising strategy for mitigating the energy and environmental crisis, but simultaneously achieving high selectivity and activity of electrocatalysts remains challenging. Here, we report low-dimensional SnO2 quantum dots chemically coupled with ultrathin Ti3C2Tx MXene nanosheets (SnO2/MXene) that boost the CO2 conversion. The coupling structure is well visualized and verified by high-resolution electron tomography together with nanoscale scanning transmission X-ray microscopy and ptychography imaging. The catalyst achieves a large partial current density of -57.8 mA cm-2 and high Faradaic efficiency of 94% for formate formation. Additionally, the SnO2/MXene cathode shows excellent Zn-CO2 battery performance, with a maximum power density of 4.28 mW cm-2, an open-circuit voltage of 0.83 V, and superior rechargeability of 60 h. In situ X-ray absorption spectroscopy analysis and first-principles calculations reveal that this remarkable performance is attributed to the unique and stable structure of the SnO2/MXene, which can significantly reduce the reaction energy of CO2 hydrogenation to formate by increasing the surface coverage of adsorbed hydrogen.

Selective CO2 Reduction Electrocatalysis Using AgCu Nanoalloys Prepared by a "Host-Guest" Method.

Multimetallic nanoalloy catalysts have attracted considerable interest for enhancing the efficiency and selectivity of many electrochemically driven chemical processes. However, the preparation of homogeneous bimetallic alloy nanoparticles remains a challenge. Here, we present a room-temperature and scalable, host-guest approach for synthesis of dilute Cu in Ag alloy nanoparticles. In this approach, an ionic silver bromide precursor harboring exogenous Cu cations is reduced to yield ∼20 nm diameter AgCu alloy nanoparticles wherein the % Cu loading can be tuned precisely. AgCu nanoparticles with a 5% nominal loading of Cu exhibit peak activity (-0.23 mA/cm2 normalized partial current density) and selectivity (83.2% faradaic efficiency) for CO product formation from electrocatalytic reduction of CO2 at mild overpotentials. These AgCu nanoalloys exhibit a higher mass activity compared to Ag- and Cu-containing nanomaterials used for similar electrocatalytic transformations. Our host-guest synthesis platform holds promise for production of other nanoalloys with relevance in electrocatalysis and optics.

New Insight into the Electronic Effect for Cu Porphyrin Catalysts in Electrocatalytic of CO2 into CH4.

Perturbation of the copper (Cu) active site by electron manipulation is a crucial factor in determining the activity and selectivity of electrochemical carbon dioxide (CO2 ) reduction reaction (e-CO2 RR) in Cu-based molecular catalysts. However, much ambiguity is present concerning their electronic structure-function relationships. Here, three molecular Cu-based porphyrin catalysts with different electron densities at the Cu active site, Cu tetrakis(4-methoxyphenyl)porphyrin (Cu─T(OMe)PP), Cu tetraphenylporphyrin (Cu─THPP), and Cu tetrakis(4-bromophenyl)porphyrin (Cu─TBrPP), are prepared. Although all three catalysts exhibit e-CO2 RR activity and the same reaction pathway, their performance is significantly affected by the electronic structure of the Cu site. Theoretical and experimental investigations verify that the conjugated effect of ─OCH3 and ─Br groups lowers the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbitals (LUMO) gap of Cu─T(OMe)PP and Cu─TBrPP, promoting faster electron transfer between Cu and CO2 , thereby improving their e-CO2 RR activity. Moreover, the high inductive effect of ─Br group reduces the electron density of Cu active site of Cu─TBrPP, facilitating the hydrolysis of the bound H2 O and thus creating a preferable local microenvironment, further enhancing the catalytic performance. This work provides new insights into the relationships between the substituent group characteristics with e-CO2 RR performance and is highly instructive for the design of efficient Cu-based e-CO2 RR electrocatalysts.

Radiation-Synthesized Metal-Organic Frameworks with Ligand-Induced Lewis Pairs for Selective CO2 Electroreduction.

The electrochemical activation of inert CO2 molecules through C─C coupling reactions under ambient conditions remains a significant challenge but holds great promise for sustainable development and the reduction of CO2 emission. Lewis pairs can capture and react with CO2, offering a novel strategy for the electrosynthesis of high-value-added C2 products. Herein, an electron-beam irradiation strategy is presented for rapidly synthesizing a metal-organic framework (MOF) with well-defined Lewis pairs (i.e., Cu- Npyridinic). The synthesized MOFs exhibit a total C2 product faradic efficiency of 70.0% at -0.88 V versus RHE. In situ attenuated total reflection Fourier transform infrared and Raman spectra reveal that the electron-deficient Lewis acidic Cu sites and electron-rich Lewis basic pyridinic N sites in the ligand facilitate the targeted chemisorption, activation, and conversion of CO2 molecules. DFT calculations further elucidate the electronic interactions of key intermediates in the CO2 reduction reaction. The work not only advances Lewis pair-site MOFs as a new platform for CO2 electrochemical conversion, but also provides pioneering insights into the underlying mechanisms of electron-beam irradiated synthesis of advanced nanomaterials.

Tailoring Interlayer Microenvironment of 2D Layered Double Hydroxides for CO2 Reduction with Enhanced C2+ Production.

Both the physicochemical properties of catalytic material and the structure of loaded catalyst layer (CL) on gas diffusion electrode (GDE) are of crucial importance in determining the conversion efficiency and product selectivity of carbon dioxide reduction reaction (CO2RR). However, the highly reducing reaction condition of CO2RR will lead to the uncontrollable structural and compositional changes of catalysts, making it difficult to tailor surface properties and microstructure of the real active species for favored products. Herein, the interlayer microenvironment of copper-based layered double hydroxides (LDHs) is rationally tuned by a facile ink solvent engineering, which affects both the surface characters and microstructure of CL on GDE, leading to distinct catalytic activity and product selectivity. According to series of in situ and ex situ techniques, the appropriate surface wettability and thickness of porous CL are found to play critical roles in controlling the local CO2 concentration and water dissociation steps that are key for hydrogenation during CO2RR, leading to a high Faradaic efficiency of 75.3% for C2+ products and a partial current density of 275 mA cm-2 at -0.8 V versus RHE. This work provides insights into rational design of efficient electrocatalysts toward CO2RR for multi-carbon generation.

Local Heating Induced Single-Crystalline Phase Control in Electrochemical Synthesis of Nanomaterials.

Development of synthetic strategies selectively yielding single crystals is desired owing to the facet-dependent chemical reactivities. Recent advances in electrochemical materials synthesis yielded nanomaterials that are surfactant-free, however, typically in polycrystalline forms. In this work, an electrochemical synthetic strategy selectively yielding single-crystalline nanoparticles by implementation of surface-selective heating of the working electrode is developed. Single crystals of copper, silver, gold, and platinum are afforded, and the crystallinity verified by electron diffraction and chemical reactivity studies. Notably, Cu (100) surface prepared by electrochemical synthesis yielded high single product selectivity when applied to electrochemical CO2 reduction catalysis.

Experimental and Computational Study Toward Identifying Active Sites of Supported SnOx Nanoparticles for Electrochemical CO2 Reduction Using Machine-Learned Interatomic Potentials.

SnOx has received great attention as an electrocatalyst for CO2 reduction reaction (CO2RR), however; it still suffers from low activity. Moreover, the atomic-level SnOx structure and the nature of the active sites are still ambiguous due to the dynamism of surface structure and difficulty in structure characterization under electrochemical conditions. Herein, CO2RR performance is enhanced by supporting SnO2 nanoparticles on two common supports, vulcan carbon and TiO2. Then, electrolysis of CO2 at various temperatures in a neutral electrolyte reveals that the application window for this catalyst is between 12 and 30 °C. Furthermore, this study introduces a machine learning interatomic potential method for the atomistic simulation to investigate SnO2 reduction and establish a correlation between SnOx structures and their CO2RR performance. In addition, selectivity is analyzed computationally with density functional theory simulations to identify the key differences between the binding energies of *H and *CO2 -, where both are correlated with the presence of oxygen on the nanoparticle surface. This study offers in-depth insights into the rational design and application of SnOx-based electrocatalysts for CO2RR.

Anionic Coordination Control in Building Cu-Based Electrocatalytic Materials for CO2 Reduction Reaction.

Renewable energy-driven conversion of CO2 to value-added fuels and chemicals via electrochemical CO2 reduction reaction (CO2RR) technology is regarded as a promising strategy with substantial environmental and economic benefits to achieve carbon neutrality. Because of its sluggish kinetics and complex reaction paths, developing robust catalytic materials with exceptional selectivity to the targeted products is one of the core issues, especially for extensively concerned Cu-based materials. Manipulating Cu species by anionic coordination is identified as an effective way to improve electrocatalytic performance, in terms of modulating active sites and regulating structural reconstruction. This review elaborates on recent discoveries and progress of Cu-based CO2RR catalytic materials enhanced by anionic coordination control, regarding reaction paths, functional mechanisms, and roles of different non-metallic anions in catalysis. Finally, the review concludes with some personal insights and provides challenges and perspectives on the utilization of this strategy to build desirable electrocatalysts.

Amino-Induced CO2 Spillover to Boost the Electrochemical Reduction Activity of CdS for CO Production.

A considerable challenge in CO2 reduction reaction (CO2RR) to produce high-value-added chemicals comes from the adsorption and activation of CO2 to form intermediates. Herein, an amino-induced spillover strategy aimed at significantly enhancing the CO2 adsorption and activation capabilities of CdS supported on N-doped mesoporous hollow carbon sphere (NH2-CdS/NMHCS) for highly efficient CO2RR is presented. The prepared NH2-CdS/NMHCS exhibits a high CO Faradaic efficiency (FECO) exceeding 90% from -0.8 to -1.1 V versus reversible hydrogen electrode (RHE) with the highest FECO of 95% at -0.9 V versus RHE in H cell. Additional experimental and theoretical investigations demonstrate that the alkaline -NH2 group functions as a potent trapping site, effectively adsorbing the acidic CO2, and subsequently triggering CO2 spillover to CdS. The amino modification-induced CO2 spillover, combined with electron redistribution between CdS and NMHCS, not only readily achieves the spontaneous activation of CO2 to *COOH but also greatly reduces the energy required for the conversion of *COOH to *CO intermediate, thus endowing NH2-CdS/NMHCS with significantly improved reaction kinetics and reduced overpotential for CO2-to-CO conversion. It is believed that this research can provide valuable insights into the development of electrocatalysts with superior CO2 adsorption and activation capabilities for CO2RR application.

Enhancing Electroreduction CO2 to Hydrocarbons via Tandem Electrocatalysis by Incorporation Cu NPs in Boron Imidazolate Frameworks.

Due to the higher value of deeply-reduced products, electrocatalytic CO2 reduction reaction (CO2 RR) to multi-electron-transfer products has received more attention. One attractive strategy is to decouple individual steps within the complicated pathway via multi-component catalysts design in the concept of tandem catalysts. Here, a composite of Cu@BIF-144(Zn) (BIF = boron imidazolate framework) is synthesized by using an anion framework BIF-144(Zn) as host to impregnate Cu2+ ions that are further reduced to Cu nanoparticles (NPs) via in situ electrochemical transformation. Due to the microenvironment modulation by functional BH(im)3 - on the pore surfaces, the Cu@BIF-144(Zn) catalyst exhibits a perfect synergetic effect between the BIF-144(Zn) host and the Cu NP guest during CO2 RR. Electrochemistry results show that Cu@BIF-144(Zn) catalysts can effectively enhance the selectivity and activity for the CO2 reduction to multi-electron-transfer products, with the maximum FECH4 value of 41.8% at -1.6 V and FEC2H4 value of 12.9% at -1.5 V versus RHE. The Cu@BIF-144(Zn) tandem catalyst with CO-rich microenvironment generated by the Zn catalytic center in the BIF-144(Zn) skeleton enhanced deep reduction on the incorporated Cu NPs for the CO2 RR to multi-electron-transfer products.

Electrochemical CO2 Reduction Reaction: Comprehensive Strategic Approaches to Catalyst Design for Selective Liquid Products Formation.

The escalating concern regarding the release of CO2 into the atmosphere poses a significant threat to the contemporary efforts in mitigating climate change. Amidst a multitude of strategies for curtailing CO2 emissions, the electrochemical CO2 reduction presents a promising avenue for transforming CO2 molecules into a diverse array of valuable gaseous and liquid products, such as CO, CH3OH, CH4, HCO2H, C2H4, C2H5OH, CH3CO2H, 1-C3H7OH and others. The mechanistic investigations of gaseous products (e. g. CO, CH4, C2H4, C2H6 and others) broadly covered in the literature. There is a noticeable gap in the literature when it comes to a comprehensive summary exclusively dedicated to coherent roadmap for the designing principles for a selective catalyst all possible liquid products (such as CH3OH, C2H5OH, 1-C3H7OH, 2-C3H7OH, 1-C4H9OH, as well as other C3-C4 products like methylglyoxal and 2,3-furandiol, in addition to HCO2H, AcOH, oxalic acid and others), selectively converted by CO2 reduction. This entails a meticulous analysis to justify these approaches and a thorough exploration of the correlation between materials and their electrocatalytic properties. Furthermore, these insightful discussions illuminate the future prospects for practical applications, a facet not exhaustively examined in prior reviews.

Engineering interfacial molecular interactions on Ag Hollow fibre gas diffusion electrodes for high efficiency in CO2 conversion to CO.

The electrochemical CO2 reduction reaction (CO2RR) occurs at the nanoscale interface of the electrode-electrolyte. Therefore, tailoring the interfacial properties in the interface microenvironment provides a powerful strategy to optimise the activity and selectivity of electrocatalysts towards the desired products. Here, the microenvironment at the electrode-electrolyte interface of the flow-through Ag-based hollow fibre gas diffusion electrode (Ag HFGDE) is modulated by introducing surfactant cetyltrimethylammonium bromide (CTAB) as the electrolyte additive. The porous hollow fibre configuration and gas penetration mode facilitate the CO2 mass transfer and the formation of the triple-phase interface. Through the ordered arrangement of hydrophobic long-alkyl chains, CTAB molecules at the electrode/electrolyte interface promoted CO2 penetration to active sites and repelled water to reduce the activity of competitive hydrogen evolution reaction (HER). By applying CTAB-containing catholyte, Ag HFGDE achieved a high CO Faradaic efficiency (FE) of over 95 % in a wide potential range and double the partial current density of CO. The enhancement of CO selectivity and suppression of hydrogen was attributed to the improvement of charge transfer and the CO2/H2O ratio enhancement. These findings highlight the importance of adjusting the local microenvironment to enhance the reaction kinetics and product selectivity in the electrochemical CO2 reduction reaction CO2RR.

Theoretical Investigation of the Adsorbate and Potential-Induced Stability of Cu Facets During Electrochemical CO2 and CO Reduction.

The activity and product selectivity of electrocatalysts for reactions like the carbon dioxide reduction reaction (CO2RR) are intimately dependent on the catalyst's structure and composition. While engineering catalytic surfaces can improve performance, discovering the key sets of rational design principles remains challenging due to limitations in modeling catalyst stability under operating conditions. Herein, we perform first-principles density functional calculations adopting implicit solvation methods with potential control to study the influence of adsorbates and applied potential on the stability of different facets of model Cu electrocatalysts. Using coverage dependencies extracted from microkinetic models, we describe an approach for calculating potential and adsorbate-dependent contributions to surface energies under reaction conditions, where Wulff constructions are used to understand the morphological evolution of Cu electrocatalysts under CO2RR conditions. We identify that CO*, a key reaction intermediate, exhibits higher kinetically and thermodynamically accessible coverages on (100) relative to (111) facets, which can translate into an increased relative stabilization of the (100) facet during CO2RR. Our results support the known tendency for increased (111) faceting of Cu nanoparticles under more reducing conditions and that the relative increase in (100) faceting observed under CO2RR conditions is likely attributed to differences in CO* coverage between these facets.

Customizing pyridinic nitrogen coordination in Ni-N-C for electrocatalytic CO2reduction towards CO.

Nickel anchored N-doped carbon electrocatalysts (Ni-N-C) are rapidly developed for the electrochemical reduction reaction of carbon dioxide (CO2RR). However, the high-performanced Ni-N-C analogues design for CO2RR remains bewilderment, for the reason lacking of definite guidance for its structure-activity relationship. Herein, the correlation between the proportion of nitrogen species derived from various nitrogen sources and the CO2RR activity of Ni-N-C is investigated. The x-ray photoelectron spectroscopy (XPS) spectrum combined with the CO2RR performance results show that pyridinic-N content has a positive correlation with CO2RR activity. Moreover, density functional theory (DFT) demonstrates that pyridinic-N coordinated Ni-N4sites offers optimized free energy and favorable selectivity towards CO2RR compared with pyrrolic-N. Accordingly, Ni-Na-C with highest pyridinic-N content (ammonia as nitrogen source) performs superior CO2RR activity, with the maximum carbon monoxide faradaic efficiency (FECO) of 99.8% at -0.88 V vs. RHE and the FECOsurpassing 95% within potential ranging of -0.88 to -1.38 V vs. RHE. The building of this parameter for CO2RR activity of Ni-N-C give instructive forecast for low-cost and highly active CO2RR electrocatalysts.

Gray mesoporous SnO2 catalyst for CO2 electroreduction with high partial current density and formate selectivity.

The mesoporous metal oxide semiconductors exhibit unique chemical and physical characteristics, making them highly desirable for catalysis, electrochemistry, energy conversion, and energy storage applications. Here, we report the facial fabrication of mesoporous gray SnO2 (MGS) electrocatalysts employing an evaporation-induced co-assembly (EICA) approach, utilizing poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers Pluronic P123 (PEO-PPO-PEO) triblock copolymer as a template for electrochemical CO2 reduction reaction (eCO2RR). By sustaining the co-assembly conditions and utilizing a thermal treatment technique based on carbon, gray mesoporous SnO2 materials with a high density of active sites and oxygen vacancies can be constructed. The MGS materials were employed in eCO2RR in a flow cell type, which exhibits excellent catalytic activity and selectivity toward formate with a high partial current density of -234 mA cm-2 and Faradaic efficiency (FE) of 93.60 % at -1.3 V vs. reversible hydrogen electrode (RHE). Interestingly, the mesoporous SnO2 with a 1.5 wt% ratio of Sn precursor to P123 surfactant (MS-1.5@350N-400A) electrode exhibits a high level of Faradaic efficiency (FE) of (98%) at a low overpotential of -0.6 VRHE, which is a seldom recorded performance for similar systems. A stable FE of 96 ± 1% was observed in the range of -0.6 to -1.2 VRHE, which is the result of a large surface area (184 m2/g) and a high number of active sites and oxygen vacancies within the mesostructured framework.

A Regenerable Bi-Based Catalyst for Efficient and Stable Electrochemical CO2 Reduction to Formate at Industrial Current Densities.

Renewable electricity shows immense potential as a driving force for the carbon dioxide reduction reaction (CO2RR) in production of formate (HCOO-) at industrial current density, providing a promising path for value-added chemicals and chemical manufacturing. However, achieving high selectivity and stable production of HCOO- at industrial current density remains a challenge. Here, we present a robust Bi0.6Cu0.4 NSs catalyst capable of regenerating necessary catalytic core (Bi-O) through cyclic voltammetry (CV) treatment. Notably, at 260 mA cm-2, faradaic efficiency of HCOO- reaches an exceptional selectivity to 99.23 %, maintaining above 90 % even after 400 h, which is longest reaction time reported at the industrial current density. Furthermore, in stability test, the catalyst was constructed by CV reconstruction to achieve stable and efficient production of HCOO-. In 20 h reaction test, the catalyst has a rate of HCOO- production of 13.24 mmol m-2 s-1, a HCOO- concentration of 1.91 mol L-1, and an energy consumption of 129.80 kWh kmol-1. In situ Raman spectroscopy reveals the formation of Bi-O structure during the gradual transformation of catalyst from Bi0.6Cu0.4 NBs to Bi0.6Cu0.4 NSs. Theoretical studies highlight the pivotal role of Bi-O structure in modifying the adsorption behavior of reaction intermediates, which further reduces energy barrier for *OCHO conversion in CO2RR.

Polymer Modification Strategy to Modulate Reaction Microenvironment for Enhanced CO2 Electroreduction to Ethylene.

Modulation of the microenvironment on the electrode surface is one of the effective means to improve the efficiency of electrocatalytic carbon dioxide reduction (eCO2 RR). To achieve high conversion rates, the phase boundary at the electrode surface should be finely controlled to overcome the limitation of CO2 solubility in the aqueous electrolyte. Herein, we developed a simple and efficient method to structure electrocatalyst with a superhydrophobic surface microenvironment by one-step co-electrodeposition of Cu and polytetrafluoroethylene (PTFE) on carbon paper. The super-hydrophobic Cu-based electrode displayed a high ethylene (C2 H4 ) selectivity with a Faraday efficiency (FE) of 67.3 % at -1.25 V vs. reversible hydrogen electrode (RHE) in an H-type cell, which is 2.5 times higher than a regular Cu electrode without PTFE. By using PTFE as a surface modifier, the activity of eCO2 RR is enhanced and water (proton) adsorption is inhibited. This strategy has the potential to be applied to other gas-conversion electrocatalysts.

Quantifying Interface-Performance Relationships in Electrochemical CO2 Reduction through Mixed-Dimensional Assembly of Nanocrystal-on-Nanowire Superstructures.

Fine-tuning the interfacial sites within heterogeneous catalysts is pivotal for unravelling the intricate structure-property relationship and optimizing their catalytic performance. Herein, a simple and versatile mixed-dimensional assembly approach is proposed to create nanocrystal-on-nanowire superstructures with precisely adjustable numbers of biphasic interfaces. This method leverages an efficient self-assembly process in which colloidal nanocrystals spontaneously organize onto Ag nanowires, driven by the solvophobic effect. Importantly, varying the ratio of the two components during assembly allows for accurate control over both the quantity and contact perimeter of biphasic interfaces. As a proof-of-concept demonstration, a series of Au-on-Ag superstructures with varying numbers of Au/Ag interfaces are constructed and employed as electrocatalysts for electrochemical CO2-to-CO conversion. Experimental results reveal a logarithmic linear relationship between catalytic activity and the number of Au/Ag interfaces per unit mass of Au-on-Ag superstructures. This work presents a straightforward approach for precise interface engineering, paving the way for systematic exploration of interface-dependent catalytic behaviors in heterogeneous catalysts.

Gapped and Rotated Grain Boundary Revealed in Ultra-Small Au Nanoparticles for Enhancing Electrochemical CO2 Reduction.

Although gapped grain boundaries have often been observed in bulk and nanosized materials, and their crucial roles in some physical and chemical processes have been confirmed, their acquisition at ultrasmall nanoscale presents a significant challenge. To date, they had not been reported in metal nanoparticles smaller than 2 nm owing to the difficulty in characterization and the high instability of grain boundary (GB) atoms. Herein, we have successfully developed a synthesis method for producing a novel chiral nanocluster Au78(TBBT)40 (TBBT=4-tert-butylphenylthiolate) with a 26-atom gapped and rotated GB. This nanocluster was precisely characterized using single-crystal X-ray crystallography and mass spectrometry. Additionally, an offset atomic defect linked to the peripheral Au(TBBT)2 staple was found in the structure. Comparing it to similarly face-centered cubic-structured Au36(TBBT)24, Au44(TBBT)28, Au52(TBBT)32, Au92(TBBT)44, and ~5 nm nanocrystals, the bridging Au78(TBBT)40 nanocluster exhibited higher catalytic activity in the electroreduction of CO2 to CO. This enhanced activity was explained through density functional theory calculations and X-ray photoelectron spectroscopy analysis, which highlight the impact of GBs and point defects on the surface properties of metal nanoclusters in balancing intermediate adsorption and product desorption.

Boosting the Electroreduction of CO2 to CO by Ligand Engineering of Gold Nanoclusters.

The electrochemical CO2 reduction reaction (CO2RR) has been widely studied as a promising means to convert anthropogenic CO2 into valuable chemicals and fuels. In this process, the alkali metal ions present in the electrolyte are known to significantly influence the CO2RR activity and selectivity. In this study, we report a strategy for preparing efficient electrocatalysts by introducing a cation-relaying ligand, namely 6-mercaptohexanoic acid (MHA), into atom-precise Au25 nanoclusters (NCs). The CO2RR activity of the synthesized Au25(MHA)18 NCs was compared with that of Au25(HT)18 NCs (HT=1-hexanethiolate). While both NCs selectively produced CO over H2, the CO2-to-CO conversion activity of the Au25(MHA)18 NCs was significantly higher than that of the Au25(HT)18 NCs when the catholyte pH was higher than the pKa of MHA, demonstrating the cation-relaying effect of the anionic terminal group. Mechanistic investigations into the CO2RR occurring on the Au25 NCs in the presence of different catholyte cations and concentrations revealed that the CO2-to-CO conversion activities of these Au25 NCs increased in the order Li+