Spatially resolved chemical analysis of cicada wings using laser-ablation electrospray ionization (LAESI) imaging mass spectrometry (IMS).

Laser-ablation electrospray ionization (LAESI) imaging mass spectrometry (IMS) is an emerging bioanalytical tool for direct imaging and analysis of biological tissues. Performing ionization in an ambient environment, this technique requires little sample preparation and no additional matrix, and can be performed on natural, uneven surfaces. When combined with optical microscopy, the investigation of biological samples by LAESI allows for spatially resolved compositional analysis. We demonstrate here the applicability of LAESI-IMS for the chemical analysis of thin, desiccated biological samples, specifically Neotibicen pruinosus cicada wings. Positive-ion LAESI-IMS accurate ion-map data was acquired from several wing cells and superimposed onto optical images allowing for compositional comparisons across areas of the wing. Various putative chemical identifications were made indicating the presence of hydrocarbons, lipids/esters, amines/amides, and sulfonated/phosphorylated compounds. With the spatial resolution capability, surprising chemical distribution patterns were observed across the cicada wing, which may assist in correlating trends in surface properties with chemical distribution. Observed ions were either (1) equally dispersed across the wing, (2) more concentrated closer to the body of the insect (proximal end), or (3) more concentrated toward the tip of the wing (distal end). These findings demonstrate LAESI-IMS as a tool for the acquisition of spatially resolved chemical information from fragile, dried insect wings. This LAESI-IMS technique has important implications for the study of functional biomaterials, where understanding the correlation between chemical composition, physical structure, and biological function is critical. Graphical abstract Positive-ion laser-ablation electrospray ionization mass spectrometry coupled with optical imaging provides a powerful tool for the spatially resolved chemical analysis of cicada wings.

High-spatial-resolution mapping of superhydrophobic cicada wing surface chemistry using infrared microspectroscopy and infrared imaging at two synchrotron beamlines.

The wings of some insects, such as cicadae, have been reported to possess a number of interesting and unusual qualities such as superhydrophobicity, anisotropic wetting and antibacterial properties. Here, the chemical composition of the wings of the Clanger cicada (Psaltoda claripennis) were characterized using infrared (IR) microspectroscopy. In addition, the data generated from two separate synchrotron IR facilities, the Australian Synchrotron Infrared Microspectroscopy beamline (AS-IRM) and the Synchrotron Radiation Center (SRC), University of Wisconsin-Madison, IRENI beamline, were analysed and compared. Characteristic peaks in the IR spectra of the wings were assigned primarily to aliphatic hydrocarbon and amide functionalities, which were considered to be an indication of the presence of waxy and proteinaceous components, respectively, in good agreement with the literature. Chemical distribution maps showed that, while the protein component was homogeneously distributed, a significant degree of heterogeneity was observed in the distribution of the waxy component, which may contribute to the self-cleaning and aerodynamic properties of the cicada wing. When comparing the data generated from the two beamlines, it was determined that the SRC IRENI beamline was capable of producing higher-spatial-resolution distribution images in a shorter time than was achievable at the AS-IRM beamline, but that spectral noise levels per pixel were considerably lower on the AS-IRM beamline, resulting in more favourable data where the detection of weak absorbances is required. The data generated by the two complementary synchrotron IR methods on the chemical composition of cicada wings will be immensely useful in understanding their unusual properties with a view to reproducing their characteristics in, for example, industry applications.

Biomimetic Polymer Surfaces by High Resolution Molding of the Wings of Different Cicadas.

Recent studies have shown that insect wings have evolved to have micro- and nanoscale structures on the wing surface, and biomimetic research aims to transfer such structures to application-specific materials. Herein, we describe a simple and cost-effective method of replica molding the wing topographies of four cicada species using UV-curable polymers. Different polymer blends of polyethylene glycol diacrylate and polypropylene glycol diacrylate were used as molding materials and a molding chamber was designed to precisely control the x, y, and z dimensions. Analysis by scanning electron microscopy showed that structures ranged from 148 to 854 nm in diameter, with a height range of 191-2368 nm, and wing patterns were transferred with high fidelity to the crosslinked polymer. Finally, bacterial cell studies show that the wing replicas possess the same antibacterial effect as the cicada wing from which they were molded. Overall, this work shows a quick and simple method for patterning UV-curable polymers without the use of expensive equipment, making it a highly accessible means of producing microstructured materials with biological properties.

Flexible Self-Cleaning Broadband Antireflective Film Inspired by the Transparent Cicada Wings.

Cicada wings, covered with arranged nanostructures, were widely studied owing to their high transparency and low reflection. However, limited by technologies, their exquisite surface structures and multifunctional features were not inherited and applied by most artificial materials adequately. Here, the excellent optical properties of the cicada wing were investigated in detail experimentally and theoretically. Besides, a flexible self-cleaning broadband antireflective film inspired by the cicada wing has been successfully fabricated by a well-designed biological template method and sol-gel process. The cicada wing ( Megapomponia intermedia) was selected as the original template directly, and a SiO2 negative replica was obtained by a sol-gel process. Then, chemical corrosion was used to remove the original template, retaining the pure negative replica. Subsequently, the polymethyl methacrylate (PMMA) positive replica could be rebuilt after another sol-gel process. Compared with a flat PMMA film, the average reflectivity of the structured PMMA film over the visible region was reduced from 10 to 2%. Besides, the bio-inspired film with a thickness of 0.18 mm exhibited satisfactory comprehensive performances with low reflectance (≤2%) in most of the visible region, as well as superhydrophobic property and perfect flexibility. Our results offered a quick and simple method to rebuild the nanostructured functional materials, promoting the practical applications of the bionic nanostructured materials. Meanwhile, the modified biomimetic fabrication method provides a solution for rebuilding exquisite biological materials and designing multifunctional surfaces. Moreover, the multifunctional antireflective film with wider universality will exhibit an enormous potential application value in optical communications, photoelectric devices, flexible display screens, and antidazzle glasses.

Nano-structured antimicrobial surfaces: From nature to synthetic analogues.

The scientific and industrial interest in antimicrobial surfaces has significantly increased in recent times. This interest is largely in response to the persistent microbial contamination of industrial and, importantly, medical implant surfaces. Bacterial contamination of implant surfaces often leads to infection at the implant-tissue interface, and with the prevalence of increasing levels of antimicrobial resistance, the treatment of these infections is becoming far more challenging. Recently, many naturally occurring, high-aspect-ratio surface topographies have been discovered that exhibit high levels of biocidal efficacy. These include epicuticular lipid nano-architectures that are formed on the surfaces of insect wings, such as cicadae and dragonflies. The antimicrobial activity of such surfaces has been found to be a consequence of the physical interactions between the nanoscale topography of the substrate and the attaching pathogenic cells, meaning that the activity is independent of biochemical surface functionality. Importantly, these desirable surface properties can be translated to synthetic biomimetic surfaces, which, when mimicked, lead to a substantial increase in the antimicrobial properties of such surfaces. This paper reviews the recent advances in understanding the basis of these mechanical antimicrobial mechanisms, and discusses the progress being made towards the fabrication of optimised, biocompatible, synthetic analogues.