Synthesis of amorphous-MnO2/Clinoptilolite and its utilization for NH4+-N oxidation in an anoxic environment.

Mediating the anoxic ammonia oxidation with manganese oxide (MnOx) can reduce the requirements of dissolved oxygen (DO) concentrations in constructed wetlands (CWs) and improve the removal of ammonium nitrogen (NH4+-N). Recent studies that employed natural manganese ore and/or mine waste as substrates in CWs may develop potentially negative environmental effects due to leachates. However, removing NH4+-N by anoxic ammonia oxidation is influenced by the crystal form of MnOx. In this study, a novel clinoptilolite-based amorphous-MnO2 (amorphous-MnO2/clinoptilolite) was synthesized by the sol-gel method as an alternative substrate to improve the efficiency of anoxic ammonia oxidation and reduce the impact of Mn ion leaching. According to the anoxic ammonia oxidation experiment of clinoptilolite, amorphous-MnO2/clinoptilolite, and manganese ore on NH4+-N, the amounts of NH4+-N removed were 24.55 mg/L/d, 44.55 mg/L/d, and 11.04 mg/L/d, respectively, and the initial NH4+-N concentration was 49.53 mg/L. These results indicated that the amorphous-MnO2/clinoptilolite had both the adsorption and the anoxic ammonia oxidation performance. The recycling experiment demonstrated that the effect of anoxic ammonia oxygen mediated by amorphous-MnO2 would not diminish with the gradual saturation of clinoptilolite for NH4+-N. Furthermore, the anoxic ammonia oxidation consumed NH4+-N in the clinoptilolite, which restored the adsorption capacity of the clinoptilolite and simultaneously decreased the leakage of manganese ions in the process, making it environmentally friendly. Therefore, the amorphous-MnO2/clinoptilolite provided an excellent substrate material for the constructed wetland under an anoxic environment, which greatly improved the nitrogen removal capacity compared to existing substrate materials.

Purified Clinoptilolite-Tuff as an Efficient Sorbent for Food-Derived Peanut Allergens.

The avoidance of allergen intake is crucial for persons affected by peanut allergy; however, the cross-contamination of food is common and leads to unpredictable consequences after the consumption of supposedly "safe" food. The aim of the present study was to eliminate harmful traces of peanut allergens from food using purified clinoptilolite-tuff (PCT)-a specially processed zeolite material. Analyses were performed using a peanut ELISA and a Coomassie blue (Bradford) assay. Mimicking conditions of the human gastrointestinal tract demonstrated a higher efficacy of PCT in the intestine (pH 6.8) than in the stomach (pH 1.5). Adsorption rates were fast (<2 min) and indicated high capacities (23 µg and 40 µg per 1 mg of PCT at pH 1.5 and pH 6.8, respectively). Allergenically relevant peanut protein concentrations were sorbed in artificial fluids (32 µg/mL by 4 mg/mL of PCT at pH 1.5 and 80.8 µg/mL by 0.25 mg/mL of PCT at pH 6.8) when imitating a daily dose of 2 g of PCT in an average stomach volume of 500 mL. Experiments focusing on the bioavailability of peanut protein attached to PCT revealed sustained sorption at pH 1.5 and only minor desorption at pH 6.8. Accompanied by gluten, peanut proteins showed competing binding characteristics with PCT. This study therefore demonstrates the potential of PCT in binding relevant quantities of peanut allergens during the digestion of peanut-contaminated food.

Zeolite and Neurodegenerative Diseases.

Neurodegenerative diseases (NDs), characterized by progressive degeneration and death of neurons, are strongly related to aging, and the number of people with NDs will continue to rise. Alzheimer's disease (AD) and Parkinson's disease (PD) are the most common NDs, and the current treatments offer no cure. A growing body of research shows that AD and especially PD are intricately related to intestinal health and the gut microbiome and that both diseases can spread retrogradely from the gut to the brain. Zeolites are a large family of minerals built by [SiO4]4- and [AlO4]5- tetrahedrons joined by shared oxygen atoms and forming a three-dimensional microporous structure holding water molecules and ions. The most widespread and used zeolite is clinoptilolite, and additionally, mechanically activated clinoptilolites offer further improved beneficial effects. The current review describes and discusses the numerous positive effects of clinoptilolite and its forms on gut health and the gut microbiome, as well as their detoxifying, antioxidative, immunostimulatory, and anti-inflammatory effects, relevant to the treatment of NDs and especially AD and PD. The direct effects of clinoptilolite and its activated forms on AD pathology in vitro and in vivo are also reviewed, as well as the use of zeolites as biosensors and delivery systems related to PD.

Adsorption efficiency of chitosan/clinoptilolite (CS/CZ) composite for effective removal of Cd+2 and Cr+6 ions from wastewater effluents of dairy cattle farms.

The wastewater effluent is responsible for the major ecological impact of the dairy sectors. To avoid the negative consequences of heavy metal pollution on the ecosystem, creative, affordable, and efficient treatment methods are now required before the effluent flows into the surrounding area. This study was aimed at assessing the effectiveness of three different adsorbents for Cd+2 and Cr+6 ions from wastewater effluents of dairy farms, including chitosan (CS), clinoptilolite zeolite (CZ), and chitosan/clinoptilolite zeolite (CS/CZ) composite. The adsorption kinetics of the CS/CZ composite were established using the effects of the key variables (pH, agitation speed, adsorbent concentrations, and contact durations). The removal (%) and adsorption capacities, qe (mg/g), were calculated using the data from the adsorption kinetics. Wastewater samples (n = 60) were collected from the wastewater effluents of five farms. Cd+2 and Cr+6 ion concentrations in all collected samples were determined. Following the CS/CZ composite creation, it was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (X-RD), and Fourier-transform infrared spectrum (FT-IR). The CS/CZ composite had an adsorption capacity of 92.4 and 96.5 mg/g for both Cd+2 and Cr+6 ions at a concentration of 2.0 g/100 ml, respectively, while the CZ adsorption capacities for the two ions were 87.5 mg/g and 61.0 mg/g, respectively, at 4.0 g/100 ml concentration. The CS was achieved at 55.56 mg/g and 33.3 mg/g, respectively, at the same concentration. The efficiency of heavy metal removal was enhanced by increasing adsorbent concentration, agitation speed, and contact duration. Using CS/CZ composite at 2.0 g/100 ml concentration, 180 min of contact time, and 300 rpm agitation speed, the greatest removal efficiencies for Cd+2 and Cr+6 ions (96.43 and 98.75%, respectively) were demonstrated.

Enriched stable 204Pb as tracer at ultra-low levels in clinical investigations.

The potential of enriched Pb (204Pb) was assessed to monitor pathways of trace levels of Pb in the pg range within the human body via isotope pattern variation in situations where natural lead cannot be used as a tracer due to regulatory limitations. Isotope ratio measurements were accomplished by means of (multi-collector) inductively coupled plasma mass spectrometry including a comparison of single and multi-collector ICP-MS for low-level 204Pb assessment. Isotopic pattern results from a blend of a large quantity of the element with a natural isotopic composition and an enriched stable isotope at orders of magnitude lower levels pose a nontrivial analytical problem. Isotope pattern deconvolution was successfully applied as mathematical tool based on multiple linear regressions. The method allowed for deconvolving the isotope pattern from measured isotope ratios without knowing the quantities of different isotope sources incorporated and mixed into the sample at levels of < 1 pg 204Pb/g blood. The objective of this manuscript is to evaluate and summarize the analytical aspects for Pb isotope pattern deconvolution based on the results of a clinical trial, where a 204Pb-enriched isotope tracer was applied to investigate the bioavailability of orally applied Pb along with purified clinoptilolite tuff as potential supplement. This unique approach allows to reduce tracer amounts to harmless levels to human health, which are in accordance with the legal regulative to study enrichment levels of < 0.01% in human blood.

Clinoptilolite based zeolite-geopolymer hybrid foams: Potential application as low-cost sorbents for heavy metals.

Clinoptilolite based zeolite-geopolymer foams (abbreviated as CFs) were prepared from natural clinoptilolite and calcined clinoptilolite, using H2O2 solution as pore former through a straightforward process. Natural clinoptilolite and CFs are characterized by analytical techniques including optical microscope, XRF, FTIR, XRD, BET, MIP and SEM. The obtained CFs possesses micropores of zeolite and meso/macropores of geopolymer matrix. The porosities range from 66.7 to 69.5%. Clinoptilolite (partially dissolved) and impurity minerals (montmorillonite, illite and albite) contribute to the formation of geopolymer. CFs shows a good static sorption performance for toxic heavy metals at pH = 5 and sorption time of 24 h. Results show that the adsorption amount of CFs for Cr3+, Pb2+, Ni2+, Cu2+ and Cd2+ in the 50 mg/L working solutions are 6.21 mg/g, 6.11-6.13 mg/g, 5.92-6.07 mg/g, 5.53-5.93 mg/g and 5.44-5.79 mg/g, respectively. In addition, CFs could reach a high removal rate (Cr removal rate >80% and Cd > 60%) for different heavy metals after three cycles. The elimination order of toxic metals is Cr3+ > Pb2+ > Ni2+ > Cu2+ > Cd2+. The sequence is in accordance with Hard-Soft-Acid-Base principle, it is also related to the speciation and the ionic radii of the hydrated metal ions. This research provides a feasible approach for preparation of promising foams sorbent based on natural zeolite for wastewater management.

Structure Features and Physicochemical Performances of Fe-Contained Clinoptilolites Obtained via the Aqueous Exchange of the Balanced Cations and Isomorphs Substitution of the Heulandite Skeletons for Electrocatalytic Activity of Oxygen Evolution Reaction and Adsorptive Performance of CO2.

Fe(III)-modified clinoptilolites (Fe-CPs) were prepared by hydrothermal treatment. The collapse of the heulandite skeletons was avoided by adjusting the pH value using HCl solution, showing the maximum relative crystallinity of the Fe-CPs at an optimal pH of 1.3. The competitive exchange performances between Fe3+ ions and H+ with Na+ (and K+) suggested that the exchange sites were more easily occupied by H+. Various characterizations verified that the hydrothermal treatments had a strong influence on the dispersion and morphology of the isolated and clustered Fe species. The high catalytic activity of the oxygen evolution reaction indicated the insertion of Fe3+ into the skeletons and the occurrences of isomorphic substitution. The fractal evolutions revealed that hydrothermal treatments with the increase of Fe content strongly affected the morphologies of Fe species with rough and disordered surfaces. Meanwhile, the Fe(III)-modified performances of the CPs were systematically investigated, showing that the maximum Fe-exchange capacity was up to 10.6 mg/g. Their thermodynamic parameters and kinetic performances suggested that the Fe(III)-modified procedures belonged to spontaneous, endothermic, and entropy-increasing behaviors. Finally, their adsorption capacities of CO2 at 273 and 298 K were preliminarily evaluated, showing high CO2 adsorption capacity (up to 1.67 mmol/g at 273 K).

Nutritional and ameliorative effects of dietary curcumin and its nano-silica and nano-zeolite encapsulated forms on growth, biochemical and fatty acid profile of common carp (Cyprinus carpio).

The present study aimed to examine individual nutritional and ameliorative effects of silica nanoparticles (SiO2NPs) and natural zeolite nanoparticles (ZeNPs) and their potential role as carriers to alter the bioavailability of curcumin. Common carps (Cyprinus carpio) were fed during 60 days with a control diet, and curcumin, turmeric, SiO2NPs, curcumin-loaded SiO2NPs, ZeNPs, and curcumin-loaded ZeNPs each at 1, 50, 6.15, 7.15, 39, and 40 g/kg diet, respectively. The highest weight gain (WG) and specific growth rate (SGR) were observed in fish fed with turmeric (P < 0.05). Moreover, dietary curcumin and ZeNPs increased the content of monounsaturated fatty acids (P < 0.05). After exposure to silver nanoparticles (AgNPs), the lowest amount of aspartate aminotransferase (AST) was obtained in fish fed with curcumin (P < 0.05). In addition, alanine aminotransferase (ALT) decreased significantly in the negative control, curcumin, and curcumin-loaded SiO2NPs treatments in comparison to the positive control group (P < 0.05). The lowest silver accumulation was observed in the negative control and SiO2NPs groups (P < 0.05). This experiment demonstrated that while the nanoencapsulation of curcumin on SiO2NPs and ZeNPs did not enhanced the impact of curcumin on the growth and biochemical factors of carps, it can still be considered a potential dietary supplement for enhancing growth and antioxidant indices when added individually to the diet.

Topically administered purified clinoptilolite-tuff for the treatment of cutaneous wounds: A prospective, randomised phase I clinical trial.

In an ageing society, chronic ulcers pose an increasingly relevant healthcare issue associated with significant morbidity and an increasing financial burden. Hence, there is an unmet medical need for novel, cost-effective therapies that improve healing of chronic cutaneous wounds. This prospective, randomised, open-label, phase I trial investigated the safety and tolerability of topically administered purified clinoptilolite-tuff (PCT), mainly consisting of the naturally occurring zeolite-mineral clinoptilolite, in artificial wounds in healthy male volunteers compared to the standard of care (SoC). We found that topically administered PCT was safe for therapeutic application in acute wounds in healthy male volunteers. No significant differences in wound healing or wound conditions were observed compared to SoC-treated wounds. However, we found a significantly higher proportion of CD68-positive cells and a significantly lower proportion of α-smooth muscle actin-positive cells in PCT-treated wounds. Scanning electron microscopy revealed PCT particles in the restored dermis in some cases. However, these did not impede wound healing or clinical symptoms. Hence, purified PCT could represent an attractive, cost-effective wound treatment promoting the process of healing.

The effect of zeolite incorporation on the physical properties of silver-reinforced glass ionomer cement.

Zeolite can impart antibacterial properties to dental materials in the long-term when incorporated with inorganic cations. However, due to its porosity, it may jeopardize the mechanical integrity of the dental material. The aim of this project was to determine the effect on physical properties when zeolite is added to commercially available Ag-reinforced Glass Ionomer Cement (GIC). Sample groups were prepared according to the percentage of zeolite-clinoptilolite (0% - control, 0.5%, 1%, 2%, and 4% wt) added to Ag-GIC. Water sorption, solubility, Vickers hardness, and flexural strength were determined. Specifically, 10 × 2 mm circular disks were fabricated for the Vickers hardness, water sorption, and water solubility tests and 25 × 5 × 2 mm bars were created for the flexural strength test. The results from the surface hardness, water sorption, and flexural strength tests suggested that adding 0.5-4% wt of zeolite to Ag-reinforced GIC did not diminish its physical properties. However, the water solubility results showed that higher concentrations (2-4% wt) of zeolite had a statistically significant increase in water solubility compared to the control. Up to 4% wt zeolite can be incorporated into Ag-reinforced GIC without compromising mechanical properties. Incorporation of 0.5-1% wt zeolite to Ag-reinforced GIC will maintain an adequate surface hardness, water sorption, and flexural strength without compromising water solubility. Further research is needed to determine the effects of higher water solubility on clinical efficacy of zeolite modified Ag-GIC. Graphical abstract.

Purified Clinoptilolite-Tuff as an Efficient Sorbent for Gluten Derived from Food.

Various gluten-related diseases (celiac disease, wheat allergy, gluten sensitivity) are known and their incidence is growing. Gluten is a specific type of plant storage protein that can impair the health of gluten-prone persons following consumption, depending on the origin. The most severe effects are induced by wheat, barley, and rye. The only treatment is based on the absolute avoidance of those foods, as even traces might have severe effects on human well-being. With the goal of binding gluten impurities after ingestion, an in vitro setting was created. A special processed kind of zeolite, purified clinoptilolite-tuff (PCT), was implemented as an adsorber of gluten derived from different origins. Zeolites are known for their excellent sorption capacities and their applications in humans and animals have been studied for a long time. Tests were also performed in artificial gastric and intestinal fluids, and the adsorption capacity was determined via a certified validated method (ELISA). Depending on the kind of gluten source, 80-130 µg/mg of gluten were bound onto PCT. Hence, purified clinoptilolite-tuff, which was successfully tested for wheat, barley, and rye, proved to be suitable for the adsorption of gluten originating from different kinds of crops. This result might form the basis for an expedient human study in the future.

Explorations on Thermodynamic and Kinetic Performances of Various Cationic Exchange Durations for Synthetic Clinoptilolite.

Various cation-exchanged clinoptilolites (M-CPs, M = Li+, Cs+, Ca2+, Sr2+) were prepared, and their exchanged thermodynamic (and kinetic) properties and adsorption performances for CH4, N2, and CO2 were investigated. The results demonstrated that the relative crystallinity of M-CPS decreased with the increase of exchange times. Their chemisorbed water weight loss gradually increased with the increasing exchange times, except that of Cs-x-CP. The ΔrGmθ values of exchange process of Li+, Cs+, Ca2+, or Sr2 presented the increased trend with the enhanced exchange times, but they decreased as the temperature increased. The negative ΔrGmθ values and the positive ΔrHmθ and ΔrSmθ values suggested that the exchanged procedure belonged to spontaneous, endothermic, and entropy-increasing behaviors; their kinetic performances followed a pseudo-second-order model. However, the calculated Ea values of exchange process showed the increased tendencies with the enhanced exchange times, indicating that the exchange process became more difficult. Finally, the preliminary adsorption results indicated that the maximum adsorption amount at 273 K and 1 bar was 0.51 mmol/g of CH4 and 0.38 mmol/g of N2 by (Na, K)-CP, and 2.32 mmol/g of CO2 by Li-6-CP.

Characteristics of Volcanic Tuff from Macicasu (Romania) and Its Capacity to Remove Ammonia from Contaminated Air.

In the present work, the capability of the volcanic tuff from Macicasu (Romania) to remove ammonia (NH3) from air with different contamination levels during 24 h of adsorption experiments was investigated. The natural zeolitic volcanic tuff was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), the Brunauer-Emmett-Teller (BET) method, inductively coupled plasma optical emission spectrometry (ICP-OES), and thermogravimetric analysis (TGA). The adsorption capacities varied between 0.022 mg NH3 g-1 zeolite and 0.282 mg NH3 g-1 zeolite, depending on the NH3 concentrations in the air and at the contact time. The nonlinear forms of the Langmuir and Freundlich isotherm models were used to fit the experimental data. Additionally, the adsorption of NH3 was studied using nonlinear pseudo-first-order (PFO), pseudo-second-order (PSO), and Elovich kinetic model. Based on the total volume of pores of used volcanic tuff, the NH3 was removed from the air both due to the physical adsorption of NH3 gas and the ion exchange of NH4+ (resulted from a reaction between NH3 and H2O adsorbed by the zeolite). Depending on the initial NH3 concentration and the amount of volcanic tuff, the NH3 concentrations can be reduced below the threshold of this contaminant in the air. The adsorption capacity of NH3 per unit of zeolite (1 g) varied in the range of 0.022-0.282 mg NH3 g-1 depending on the NH3 concentration in the air.

Adsorption of Methylene Blue and Tetracycline by Zeolites Immobilized on a PBAT Electrospun Membrane.

The detection of emerging contaminants in bodies of water has steadily increased in recent years, becoming a severe problem threatening human and ecosystem health. Developing new materials with adsorption properties to remove these pollutants represents an important step toward a potential solution. In this paper, a polybutylene adipate terephthalate (PBAT) nanofibrous membrane incorporating clinoptilolite zeolite was developed and its excellent performance in removing tetracycline (TC) and methylene blue (MB) from water was demonstrated. The composite membrane was prepared in two steps: firstly, a homogeneous dispersion of clinoptilolite (1 wt% respect to polymer) in a PBAT solution (12.6 wt%) was electrospun; secondly, the electrospun membrane was subjected to an acid treatment that improved its wettability through the protonation of the surface silanol groups of clinoptilolite. The resulting membrane was hydrophilic and showed higher adsorption for TC (800 mg/g) and MB (100 mg/g), using a low dose (90 mg/L) powdered zeolite. The maximum removal capacity was obtained at neutral pH, being the cation exchange reaction the main adsorption mechanism. Pseudo-second-order kinetics and Henry's law agree well with the proposed chemisorption and the high affinity of TC and MB for the adsorbent. The material can be reused after the removal process without generating additional contamination, although losing some effectivity.

Effects of clinoptilolite on heavy metal levels in milk, proinflammatory cytokine responses (IL-1ß and IL-6) and oxidative stress in dairy cows.

The effects of clinoptilolite on milk copper (Cu), lead (Pb), zinc (Zn), cadmium (Cd) and iron (Fe) concentrations, proinflammatory cytokine responses, oxidative stress status, whole blood cell counts and liver and kidney functions were investigated in dairy cows exhibiting no signs of any kind of toxicity. Clinoptilolite was added to the feed at a dose of 200 mg kg-1 body weight in the clinoptilolite-treated group (n = 14), but was not added to the feed in the control group (n = 7). In the milk samples (n = 21) collected before the experiment, the Cu, Pb, Zn, Cd and Fe values were 0.021 ± 0.020, 0.104 ± 0.01, 3.42 ± 0.32, <0.000, 0.56 ± 0.34 ppm, respectively. At the end of the experiment (30th day), among the elements measured in milk samples collected from the clinoptilolite-treated group, only the Pb value (0.076 ± 0.01) was lower than the 0-day value of the clinoptilolite-treated group (0.104 ± 0.01) and the 30th-day value of the control group (0.105 ± 0.01) was found to be statistically lower. Changes determined at the end of clinoptilolite application in serum superoxide dismutase (SOD), malondialdehyde (MDA), albumin, glucose, urea and urine creatinine/urine total protein (uCr/uTP) values, which were interpreted as the effect of lead exposure before the trial, were evaluated as the positive effect of clinoptilolite. It was concluded that the addition of clinoptilolite to the feed in dairy cows caused a significant decrease in the amount of Pb in milk, and positive changes in the parameters related to oxidative stress in serum and in parameters related to renal function.

Addition of clinoptilolite in the diet reduces uterine PMN leukocytes and open days in multiparous lactating dairy cows managed in a mountain tropical pasture-based system.

This study aimed to assess the effect of adding clinoptilolite in the diet on uterine health and reproductive performance in multiparous lactating dairy cows managed in a tropical pasture-based system above 2500 m of altitude. Seventy-seven multiparous Holstein crossbred cows from two farms were allocated randomly into two groups: clinoptilolite supplemented cows (CLG, n = 42) and non-supplemented cows as control (CG, n = 35). Cows from CLG were supplemented with clinoptilolite from 30 days (50 g/cow/day) before to 60 days after calving (200 g/cow/day). In CLG cows, percentages of uterine PMN leukocytes (P < 0.0001) and proportion of subclinical endometritis (P = 0.0187) were lower than in CG. The interval calving to first corpus luteum was shorter (P = 0.0759) in CLG than CG, and calving to first service interval was similar between treatments. Cows from CLG became pregnant 35 days earlier than CG cows (P = 0.0224). On farm A, calving to conception interval was 18.1 days longer in CLG than in CG (P = 0.3750); in farm B, this interval was 86.2 days shorter in CLG than in CG (P = 0.0002). In conclusion, daily addition of clinoptilolite in the diet decreased the percentage of uterine PMN leukocytes, the proportion of cows with subclinical endometritis, and shortened the calving-conception interval in multiparous lactating dairy cows.

Natural Clinoptilolite Nanoparticles Coated with Phosphatidylcholine.

A nanocarrier was obtained by coating the natural clinoptilolite particle surface with a phosphatidylcholine layer. The shell effective size does not exceed the thickness of the phospholipid molecular layer, which was confirmed by UV spectrometry and molecular mass spectrometry. The hydrodynamic diameter of the formulated nanocarrier, which was determined by dynamic light scattering, is smaller than the clinoptilolite core size. This effect is assumed to be caused by the phospholipid shell, which reduces the aqueous medium friction. The nanosize of the formulated nanocarrier, the natural clinoptilolite core, and the phospholipid shell together allow a combination of fruitful features that can be used for the fabrication of multifunctional platforms for the delivery of biologically active substances, bioimaging, or as a basis for biosensors.

New Deposit of Mordenite-Clinoptilolite in the Eastern Region of Cuba: Uses as Pozzolans.

This work describes the newly discovered zeolites in the eastern region of Cuba. In the researched area, there have been no previous studies of natural zeolite exploration. Therefore, the results shown here are new. The main object of this research is to analyse five samples of zeolites and demonstrate their pozzolanic capacity and the possibility of their usage in the industrial manufacturing of pozzolanic cements. The study of the samples was performed by X-ray diffraction (XRD), X-ray fluorescence (XRF) and scanning electron microscopy (SEM). A chemical analysis (CAQ) to determine the quality of the samples as pozzolans was performed, by determining the total SiO2, reactive SiO2, total CaO, reactive CaO, Al2O3, MgO and the insoluble residue (I.R.). Lastly, an eight-day pozzolanicity analysis (PA) was carried out to determine the pozzolanic reactivity of the samples. The results obtained by XRD, XRF and SEM established that the researched zeolite samples have two main zeolitic phases: mordenite and clinoptilolite. Altered volcanic glass, quartz and smectite (montmorillonite) are the secondary phases. The results of the chemical quality analysis (CAQ) showed that the samples contain a considerable amount of reactive SiO2 and reactive CaO, as well as a low content of insoluble residue, which reinforces their properties as pozzolans. The results of the pozzolanicity analysis (PA) concluded that the analysed samples actively react with Ca(OH)2 after eight days. Based on all the results mentioned above, it is established that both mordenite and clinoptilolite behave like pozzolans and can be recommended for the manufacture of pozzolanic cements, which have more effective properties than Portland cement, in terms of physical, chemical and mechanical strength, low heat of hydration, resistance to sulphates, low CO2 emissions to the atmosphere and negligible impacts on the environment.

Study of Mono- and Bimetallic Fe and Mn Oxide-Supported Clinoptilolite for Improved Pb(II) Removal.

A cost-effective, iron- and manganese-oxide-supported clinoptilolite-based rock was prepared. Based on its nanoporous structure, it worked as a nanoreactor, thereby providing enhanced functionalities. The mono- and bimetallic Fe- and Mn-oxide-supported clinoptilolite was thoroughly characterized with thermoanalytical FT-IR, XRD, SEM, and XPS spectroscopy. All the spectral procedures that were used confirmed the occurrence of a new MnO2 phase (predominantly birnessite), including mostly amorphous iron oxi(hydr)oxide (FeO(OH)) species on the surface of the above-synthesized adsorbents. The synthesized products validated a considerably higher adsorption capacity toward Pb(II) pollutants compared to the natural clinoptilolite. The following order of a(max) toward Pb(II) was found: MnOx-zeolite (202.1 mg/g) > FeO(OH)-MnOx-zeolite (101.3 mg/g) > FeO(OH)-zeolite (80 mg/g) > natural zeolite (54.9 mg/g). The adsorption equilibrium data were analyzed by the two-parameter empirical isotherm models Langmuir, Freundlich, and BET as well as the three-parameter Redlich-Peterson isotherm.

Effects of Zeolite as a Drug Delivery System on Cancer Therapy: A Systematic Review.

Zeolites and zeolitic imidazolate frameworks (ZIFs) are widely studied as drug carrying nanoplatforms to enhance the specificity and efficacy of traditional anticancer drugs. At present, there is no other systematic review that assesses the potency of zeolites/ZIFs as anticancer drug carriers. Due to the porous nature and inherent pH-sensitive properties of zeolites/ZIFs, the compounds can entrap and selectively release anticancer drugs into the acidic tumor microenvironment. Therefore, it is valuable to provide a comprehensive overview of available evidence on the topic to identify the benefits of the compound as well as potential gaps in knowledge. The purpose of this study was to evaluate the potential therapeutic applications of zeolites/ZIFs as drug delivery systems delivering doxorubicin (DOX), 5-fluorouracil (5-FU), curcumin, cisplatin, and miR-34a. Following PRISMA guidelines, an exhaustive search of PubMed, Scopus, Embase, and Web of Science was conducted. No language or time limitations were used up to 25th August 2021. Only full text articles were selected that pertained to the usage of zeolites/ZIFs in delivering anticancer drugs. Initially, 1279 studies were identified, of which 572 duplicate records were excluded. After screening for the title, abstract, and full texts, 53 articles remained and were included in the qualitative synthesis. An Inter-Rater Reliability (IRR) test, which included a percent user agreement and reliability percent, was conducted for the 53 articles. The included studies suggest that anticancer drug-incorporated zeolites/ZIFs can be used as alternative treatment options to enhance the efficacy of cancer treatment by mitigating the drawbacks of drugs under conventional treatment.