The role of macrophage polarization and related key molecules in pulmonary inflammation and fibrosis induced by coal dust dynamic inhalation exposure in Sprague-Dawley rats.

Coal dust is the main occupational hazard factor during coal mining operations. This study aimed to investigate the role of macrophage polarization and its molecular regulatory network in lung inflammation and fibrosis in Sprague-Dawley rats caused by coal dust exposure. Based on the key exposure parameters (exposure route, dose and duration) of the real working environment of coal miners, the dynamic inhalation exposure method was employed, and a control group and three coal dust groups (4, 10 and 25 mg/m3) were set up. Lung function was measured after 30, 60 and 90 days of coal dust exposure. Meanwhile, the serum, lung tissue and bronchoalveolar lavage fluid were collected after anesthesia for downstream experiments (histopathological analysis, RT-qPCR, ELISA, etc.). The results showed that coal dust exposure caused stunted growth, increased lung organ coefficient and decreased lung function in rats. The expression level of the M1 macrophage marker iNOS was significantly upregulated in the early stage of exposure and was accompanied by higher expression of the inflammatory cytokines TNF-α, IL-1ß, IL-6 and the chemokines IL-8, CCL2 and CCL5, with the most significant trend of CCL5 mRNA in lung tissues. Expression of the M2 macrophage marker Arg1 was significantly upregulated in the mid to late stages of coal dust exposure and was accompanied by higher expression of the anti-inflammatory cytokines IL-10 and TGF-ß. In conclusion, macrophage polarization and its molecular regulatory network (especially CCL5) play an important role in lung inflammation and fibrosis in SD rats exposed to coal dust by dynamic inhalation.

Microscopic deposition-property relationships in microbial-induced consolidation of coal dusts.

In recent years, the preparation of new microbial dust suppressants based on microbial induced carbonate precipitation (MICP) technology through enriched urease-producing microbial communities has become a new topic in the field of coal dust control. The deposition of CaCO3 was the key to suppress coal dust. However, deposition characteristics in the field is not sufficient and the relationship between deposition characteristics and erosion resistance is not clear, which hinders the development of engineering application of new microbial dust suppressant. Therefore, based on X-CT technology, this paper observed and quantified micro-deposition of bio-consolidated coal dust with different calcium sources. Furthermore, a conceptual framework for deposition was proposed and its correlation with erosion resistance was revealed. The results showed that CaCO3 induced by calcium chloride and calcium lactate was aggregate deposited. Aggregate deposited CaCO3 was small in volume, showed the distribution of aggregation in the central area and loose outside, and mosaiced pores. CaCO3 induced by calcium nitrate was surface deposition due to attached biomass. Surface deposition was mostly large volume CaCO3 expanding from the inside out, which could cover coal dust to a high degree and completely cemented pores. In addition, the threshold detachment velocity of coal dust cemented by surface deposition was increased by 17.6-19.1% compared to aggregate deposition. This depended on the abundance and strength of CaCO3 bonding between coal dust particles under different deposition. The two-factor model based on porosity and CaCO3 coverage can well express relationship between erosion resistance and depositional characteristics. Those results will help the engineering application of MICP technology in coal dust suppression.

Vitamin D3 reverses immune tolerance and enhances the cytotoxicity of effector T cells in coal pneumoconiosis.

Coal worker's pneumoconiosis (CWP) is a common occupational disease that coal miners are highly susceptible due to long-term exposure to coal dust particles (CDP). CWP can induce the accumulation of immune cells surrounding the bronchioles and alveoli in the lungs, resulting in pulmonary fibrosis and compromised immune function. Using single-cell RNA sequencing (scRNA-Seq), our previous studies disclose that CDP exposure triggers heterogeneity of transcriptional profiles in mouse pneumoconiosis, while Vitamin D3 (VitD3) supplementation reduces CDP-induced cytotoxicity; however, the mechanism by which how VitD3 regulates immune status in coal pneumoconiosis remains unclear. In this study, we elucidated the heterogeneity of pulmonary lymphocytes in mice exposed to CDP and demonstrated the therapeutic efficacy of VitD3 using scRNA-Seq dataset. The validation of key lymphocyte markers and their functional molecules was performed using immunofluorescence. The results demonstrated that VitD3 increased the number of naive T cells by modulating CD4 + T cell differentiation and decreased the number of Treg cells in CDP-exposed mice, thereby enhancing the cytotoxic activity of CD8 + effector T cells. These effects markedly alleviated lung fibrosis and symptoms. Taken together, the mechanism by which VitD3 regulates the functions of lymphocytes in CWP provides a new perspective for further research on the prevention and treatment of CWP.

Research progress on the pathogenesis and prediction of pneumoconiosis among coal miners.

Pneumoconiosis is the most common occupational disease among coal miners, which is a lung disease caused by long-term inhalation of coal dust and retention in the lungs. The early stage of this disease is highly insidious, and pulmonary fibrosis may occur in the middle and late stages, leading to an increase in patient pain index and mortality rate. Currently, there is a lack of effective treatment methods. The pathogenesis of pneumoconiosis is complex and has many influencing factors. Although the characteristics of coal dust have been considered the main cause of different mechanisms of pneumoconiosis, the effects of coal dust composition, particle size and shape, and coal dust concentration on the pathogenesis of pneumoconiosis have not been systematically elucidated. Meanwhile, considering the irreversibility of pneumoconiosis progression, early prediction for pneumoconiosis patients is particularly important. However, there is no early prediction standard for pneumoconiosis among coal miners. This review summarizes the relevant research on the pathogenesis and prediction of pneumoconiosis in coal miners in recent years. Firstly, the pathogenesis of coal worker pneumoconiosis and silicosis was discussed, and the impact of coal dust characteristics on pneumoconiosis was analyzed. Then, the early diagnostic methods for pneumoconiosis have been systematically introduced, with a focus on image collaborative computer-aided diagnosis analysis and biomarker detection. Finally, the challenge of early screening technology for miners with pneumoconiosis was proposed.

[Comparison and analysis research on occupational exposure limits of coal dust between China and foreign countries].

Objective: To study and compare the occupational exposure limits (OELs) of coal dust between China and foreign countries, understand the OEL of coal dust in China, and provide data and basis for revising the OEL of coal dust in China. Methods: In August 2023, by searching the official websites of limits setting institutions in relevant countries and regions at home and abroad, collecting and sorting out the OELs of coal dust issued by 10 limit setting institutions in 6 countries and the background information of the formulation, and conducting specific analysis on the classification, limit level and formulation principles of coal dust OEL in each country/institution. Results: In China and Japan, the total dust and respirable dust of coal dust OEL were established respectively, while in other countries, only the time-weighted average concentration (TWA) of respirable coal dust exposure was established. The TWA prescribed by China's Notional Health Commission, the United States Occupational Safety and Health Administration (OSHA) , the United States Mining Safety and Health Administration (MSHA) and the Australian Safety Work Bureau when the SiO(2) content was less than 5% were 5, 2.4, 2 and 3 mg/m(3) respectively. China GBZ 2.1-2019 sets the limit of 2.5 mg/m(3) for respirable coal dust with SiO(2) content less than 10%. The TWA set by the American Conference of Government Industrial Hygienists (ACGIH) and the South African Department of Mines and Energy (DME) for anthracite coal were 0.4 and 0.8 mg/m(3), respectively, and bituminous coal or lignite were 0.9 and 1.8 mg/m(3), respectively. The respirable coal dust TWA set by the National Institute for Occupational Safety and Health (NIOSH) in the United States was 1 mg/m(3), and the TWA set by the New Zealand Work Safety Authority was 3 mg/m(3). Conclusion: At present, the OEL of coal dust in China is at a relatively loose level, and it is suggested to further explore the possibility of revising coal dust OEL.

Poor adherence to dust, noise and safety regulations predict injury rates in underground coal mines.

BACKGROUND: While safety in US coal mining has improved over the past two decades, general occupational health research shows that risk of injury varies across individual worksites and is influenced by worksite safety cultures and practices. METHODS: In this longitudinal study, we evaluated whether mine-level characteristics reflecting poor adherence to health and safety regulations in underground coal mines are associated with higher acute injury rates. We aggregated Mine Safety and Health Administration (MSHA) data by year for each underground coal mine for the period 2000-2019. Data included part-50 injuries, mine characteristics, employment and production, dust sampling, noise sampling, and violations. Multivariable hierarchical generalised estimating equations (GEE) models were developed. RESULTS: Based on the final GEE model, despite an average annual decline in injury rates by 5.5%, the following indicators of inadequate adherence to health and safety regulations were associated with increased average annual injury rates: +2.9% for each 10% increase in dust samples exceeding the permissible exposure limit; +0.6% for each 10% increase of permitted 90 dBA 8-hour noise exposure dose; +2.0% for every 10 substantial-significant MSHA violations in a year; +1.8% for each rescue/recovery procedure violation; +2.6% for each safeguard violation. If a fatality occurred in a mine, injury rates increased by 11.9% in the same year, but declined by 10.4% in the following year. The presence of safety committees was associated with a 14.5% decline in injury rates. DISCUSSION: In US underground coal mines, injury rates are associated with poor adherence to dust, noise and safety regulations.

Preparation of dopamine-modified sea squirt cellulose hydrogel dust-fixing agent to prevent raising of dust.

Sea squirts, a tunicate, are found in all oceans and can foul marine ports and aquaculture, mainly affecting shipping and biodiversity. In this study, cellulose was extracted from sea squirts, and its hydrophilic properties were improved by substituting the hydrogen ions of the cellulose -OH with dopamine. The modified cellulose was used to prepare a hydrogel for use as a dust-fixing agent (CDP) to reduce air pollution caused by dust. After response surface method optimization, the proportions of binder, water-retaining agent, wetting agent, and antifreeze in CDP were 0.97, 1.44, 0.23, and 6.32%, respectively. This composition improved the wetting ability and permeability of CDP on particle surfaces. CDP exhibited good water retention at -11-50 °C. CDP reduced the wind erosion rate of dust at a wind speed of 12 m/s to 1.18%. The molecular dynamics method was used to analyze the wetting process and mechanism of CDP, revealing that hydrogen bonds were the dominant force at the solid-liquid interface. The adsorption of CDP onto the surface of coal increased the number of hydrophilic points. Water molecules were adsorbed on these hydrophilic points through hydrogen bonding, improving the binding energy between the solid and liquid interfaces. The application of ascidian cellulose in dust control makes full use of the biological value of ascidians, promoting sustainable development of the global biological economy.

Molecular Mechanism Study on the Effect of Microstructural Differences of Octylphenol Polyoxyethylene Ether (OPEO) Surfactants on the Wettability of Anthracite.

Inhalable coal dust poses a serious threat to coal mining safety, air quality, and the health of miners. Therefore, the development of efficient dust suppressants is crucial for addressing this issue. This study evaluated the ability of three high-surface-active OPEO-type nonionic surfactants (OP4, OP9, and OP13) to improve the wetting properties of anthracite via extensive experiments and a molecular simulation and determined the micro-mechanism of different wetting properties. The surface tension results show that OP4 has the lowest surface tension (27.182 mN/m). Contact angle tests and wetting kinetics models suggest that OP4 exhibits the strongest wetting improvement ability on raw coal with the smallest contact angle (20.1°) and the fastest wetting rate. In addition, FTIR and XPS experimental results also reveal that OP4-treated coal surfaces introduce the most hydrophilic elements and groups. UV spectroscopy testing shows that OP4 has the highest adsorption capacity on the coal surface, reaching 133.45 mg/g. The surfactant is adsorbed on the surface and pores of anthracite, while the strong adsorption ability of OP4 results in the least amount of N2 adsorption (8.408 cm3/g) but the largest specific surface area (1.673 m2/g). In addition, the filling behavior and aggregation behavior of surfactants on the anthracite coal surface were observed using SEM. The MD simulation results indicate that OPEO reagents with overly long hydrophilic chains would produce spatial effects on the coal surface. Under the influence of the π-π interaction between the hydrophobic benzene ring and the coal surface, OPEO reagents with fewer ethylene oxide quantities are more prone to adsorb onto the coal surface. Therefore, after the adsorption of OP4, both the polarity and the water molecule adhesion ability of the coal surface are greatly enhanced, which helps to suppress dust production. These results provide important references and a foundation for future designs of efficient compound dust suppressant systems.

Long-term effects of carbon monoxide poisoning at Miike coal mine: A 33-year follow-up study.

On November 9, 1963, a coal dust explosion occurred at the Miike Mikawa Coal Mine (Omuta, Kyushu Region of Japan). This resulted in a massive release of carbon monoxide (CO) gas that resulted in 458 fatalities and 839 victims of CO poisoning. After the accident, the Department of Neuropsychiatry, Kumamoto University School of Medicine (including the authors) immediately began to conduct periodic medical examinations of the victims. Such a long-term follow up of so many CO-poisoned patients is globally unprecedented. When the Miike Mine was closed in March of 1997, 33 years after the disaster, we conducted the final follow-up study.

Performance optimization and mechanism analysis of applied Enteromorpha-based composite dust suppressant.

In order to solve the problem of environmental pollution caused by the escape of coal dust in open-pit coal mines, a composite dust suppressant was prepared from Enteromorpha, and the preparation factors (water-soluble polymer, temperature, solid content and surfactant) were optimized. The mechanism of dust suppression and the possibility of large-scale field application were discussed. The research results on the related properties of dust suppressants showed that the performance of Enteromorpha-based dust suppressants prepared by this method was excellent compared with similar studies. Among them, polyacrylamide (PAM) Enteromorpha-based dust suppressant had the best performance, with viscosity of 25.1 mPa s and surface tension of 27.05 mN/m. Moreover, PAM Enteromorpha-based dust suppressant had the best effect, with the mass loss of 2.94% under the wind speed of 10 m/s and the coal dust loss rate of 4.6% after rain erosion, and it had strong water retention performance. Through the discussion of dust suppression mechanism, it was found that the mechanical entangled network structure with hydrogen bonds as nodes was formed after the graft copolymerization of PAM and Enteromorpha. It had high permeability and good adhesion. After quickly wetting coal dust, it formed a dense package for coal dust. The field experiment also showed that the use of Enteromorpha-based dust suppressant can effectively inhibit the escape of coal dust. From the point of view of economy and efficiency, Enteromorpha can save 30% of the material cost and the dust suppression efficiency can reach 89-94%. Therefore, the Enteromorpha-based dust suppressant may stably suppress coal dust on the basis of reducing the cost.

Sound Identification Method for Gas and Coal Dust Explosions Based on MLP.

To solve the problems of backward gas and coal dust explosion alarm technology and single monitoring means in coal mines, and to improve the accuracy of gas and coal dust explosion identification in coal mines, a sound identification method for gas and coal dust explosions based on MLP in coal mines is proposed, and the distributions of the mean value of the short-time energy, zero crossing rate, spectral centroid, spectral spread, roll-off, 16-dimensional time-frequency features, MFCC, GFCC, short-time Fourier coefficients of gas explosion sound, coal dust sound, and other underground sounds were analyzed. In order to select the most suitable feature vector to characterize the sound signal, the best feature extraction model of the Relief algorithm was established, and the cross-entropy distribution of the MLP model trained with the different numbers of feature values was analyzed. In order to further optimize the feature value selection, the recognition results of the recognition models trained with the different numbers of sound feature values were compared, and the first 35-dimensional feature values were finally determined as the feature vector to characterize the sound signal. The feature vectors are input into the MLP to establish the sound recognition model of coal mine gas and coal dust explosion. An analysis of the feature extraction, optimal feature extraction, model training, and time consumption for model recognition during the model establishment process shows that the proposed algorithm has high computational efficiency and meets the requirement of the real-time coal mine safety monitoring and alarm system. From the results of recognition experiments, the sound recognition algorithm can distinguish each kind of sound involved in the experiments more accurately. The average recognition rate, recall rate, and accuracy rate of the model can reach 95%, 95%, and 95.8%, respectively, which is obviously better than the comparison algorithm and can meet the requirements of coal mine gas and coal dust explosion sensing and alarming.

Sound Recognition Method of Coal Mine Gas and Coal Dust Explosion Based on GoogLeNet.

To solve the problems of backward means of coal mine gas and coal dust explosion monitoring, late reporting, and low leakage rate, a sound recognition method of coal mine gas and coal dust explosion based on GoogLeNet was proposed. After installing mining pickups in key monitoring areas of coal mines to collect the sounds of the working equipment and the environment, the collected sound was analyzed by continuous wavelet to obtain its scale coefficient map. This was then imported into GoogLeNet to obtain the recognition model of coal mine gas and coal dust explosions. The test sound was obtained by continuous wavelet analysis to obtain the scale coefficient map, brought into the completed training recognition model to obtain the sound signal class, and verified by experiment. Firstly, the scale coefficient map extracted from the sound signal by continuous wavelet analysis showed that the similarity between the subjective and objective indicators of the wavelet coefficient maps of the gas explosion sound and coal dust explosion sound was higher, but the difference between these and the rest of the coal mine sounds was clearer, helping to effectively distinguish gas and coal dust explosion sounds from other sounds. Secondly, the experimental results of GoogLeNet parameters can be obtained. When the dropout parameter is 0.5 and the initial learning rate is 0.001, the recognition effect of the model established by GoogLeNet was optimal. According to the selected parameters, the training loss, testing loss, training recognition rate, and testing recognition rate of the model are all in line with expectations. Finally, the experimental recognition results show that the recognition rate of the proposed method is 97.38%, the recall rate is 86.1%, and the accuracy rate is 100% for the case of a 9:1 ratio of test data to training data, and the overall recognition effect of the proposed GoogLeNet is significantly better than that of vgg and Alexnet, which can effectively solve the problem of under-sampling of coal mine gas and coal dust explosion sounds and can meet the need for the intelligent recognition of coal mine gas and dust explosions.

Differences in the characteristics and pulmonary toxicity of nano- and micron-sized respirable coal dust.

BACKGROUND: The characteristics of coal dust (CD) particles affect the inhalation of CD, which causes coal worker's pneumoconiosis (CWP). CD nanoparticles (CD-NPs, < 500 nm) and micron particles (CD-MPs, < 5 µm) are components of the respirable CD. However, the differences in physicochemical properties and pulmonary toxicity between CD-NPs and CD-MPs remain unclear. METHODS: CD was analyzed by scanning electron microscopy, Malvern nanoparticle size potentiometer, energy dispersive spectroscopy, infrared spectroscopy, and electron paramagnetic resonance spectroscopy. CCK-8 assay, ELISA, transmission electron microscope, JC-1 staining, reactive oxygen species activity probe, calcium ion fluorescent probe, AO/EB staining, flow cytometry, and western blot were used to determine the differences between CD-NPs and CD-MPs on acute pulmonary toxicity. CCK-8, scratch healing and Transwell assay, hematoxylin-eosin and Masson staining, immunohistochemistry, immunofluorescence, and western blot were applied to examine the effects of CD-NPs and CD-MPs on pneumoconiosis. RESULTS: Analysis of the size distribution of CD revealed that the samples had been size segregated. The carbon content of CD-NPs was greater than that of CD-MPs, and the oxygen, aluminum, and silicon contents were less. In in vitro experiments with A549 and BEAS-2B cells, CD-NPs, compared with CD-MPs, had more inflammatory vacuoles, release of pro-inflammatory cytokines (IL-6, IL-1ß, TNFα) and profibrotic cytokines (CXCL2, TGFß1), mitochondrial damage (reactive oxygen species and Ca2+ levels and decreased mitochondrial membrane potential), and cell death (apoptosis, pyroptosis, and necrosis). CD-NPs-induced fibrosis model cells had stronger proliferation, migration, and invasion than did CD-MPs. In in vivo experiments, lung coefficient, alveolar inflammation score, and lung tissue fibrosis score (mean: 1.1%, 1.33, 1.33) of CD-NPs were higher than those of CD-MPs (mean: 1.3%, 2.67, 2.67). CD-NPs accelerated the progression of pulmonary fibrosis by upregulating the expression of pro-fibrotic proteins and promoting epithelial-mesenchymal transition. The regulatory molecules involved were E-cadherin, N-cadherin, COL-1, COL-3, ZO-1, ZEB1, Slug, α-SMA, TGFß1, and Vimentin. CONCLUSIONS: Stimulation with CD-NPs resulted in more pronounced acute and chronic lung toxicity than did stimulation with CD-MPs. These effects included acute inflammatory response, mitochondrial damage, pyroptosis, and necrosis, and more pulmonary fibrosis induced by epithelial-mesenchymal transition.

Carboxymethyl cellulose sodium gel: A modified material used to suppress coal dust pollution.

To reduce the environmental pollution caused by coal dust, a new type of dust inhibitor with a wide application range, high efficiency, and production simplicity was synthesized by modifying sodium carboxymethylcellulose (CMC-Na) with acrylamide (AM). Through molecular dynamics simulations and experiments, the surfactant composition and concentration were optimized. The experimental results showed that the graft copolymer of CMC-Na and AM (CMC-Na-co-AM) had more pores on the microscopic surface and a unique fiber network structure, which greatly increased its contact area with coal dust. After 14 h of drying at 60 °C, coal samples that were sprayed with the dust suppression agent retained >50% of the water in the spray, which was 9 times greater than the water retention of coal samples sprayed with just water. Additionally, the ability of the dust suppression agent to resist wind erosion was 6 times that of water. The CMC-Na-co-AM dust suppression agent showed that it could effectively inhibit the spread of coal dust under strong winds, offering a solution to the problem of coal dust pollution in coal production and storage.

Coal dust exposure triggers heterogeneity of transcriptional profiles in mouse pneumoconiosis and Vitamin D remedies.

BACKGROUND: Coal dust particles (CDP), an inevitable by-product of coal mining for the environment, mainly causes coal workers' pneumoconiosis (CWP). Long-term exposure to coal dust leads to a complex alternation of biological processes during regeneration and repair in the healing lung. However, the cellular and complete molecular changes associated with pulmonary homeostasis caused by respiratory coal dust particles remain unclear. METHODS: This study mainly investigated the pulmonary toxicity of respirable-sized CDP in mice using unbiased single-cell RNA sequencing. CDP (< 5 µm) collected from the coal mine was analyzed by Scanning Electron Microscope (SEM) and Mass Spectrometer. In addition, western blotting, Elisa, QPCR was used to detect gene expression at mRNA or protein levels. Pathological analysis including HE staining, Masson staining, immunohistochemistry, and immunofluorescence staining were performed to characterize the structure and functional alternation in the pneumoconiosis mouse and verify the reliability of single-cell sequencing results. RESULTS: SEM image and Mass Spectrometer analysis showed that coal dust particles generated during coal mine production have been crushed and screened with a diameter of less than 5 µm and contained less than 10% silica. Alveolar structure and pulmonary microenvironment were destroyed, inflammatory and death (apoptosis, autophagy, and necrosis) pathways were activated, leading to pneumoconiosis in post 9 months coal dust stimulation. A distinct abnormally increased alveolar type 2 epithelial cell (AT2) were classified with a highly active state but reduced the antimicrobial-related protein expression of LYZ and Chia1 after CDP exposure. Beclin1, LC3B, LAMP2, TGF-ß, and MLPH were up-regulated induced by CDP, promoting autophagy and pulmonary fibrosis. A new subset of macrophages with M2-type polarization double expressed MLPH + /CD206 + was found in mice having pneumoconiosis but markedly decreased after the Vitamin D treatment. Activated MLPH + /CD206 + M2 macrophages secreted TGF-ß1 and are sensitive to Vitamin D treatment. CONCLUSIONS: This is the first study to reconstruct the pathologic progression and transcriptome pattern of coal pneumoconiosis in mice. Coal dust had obvious toxic effects on lung epithelial cells and macrophages and eventually induced pulmonary fibrosis. CDP-induced M2-type macrophages could be inhibited by VD, which may be related to the alleviation of the pulmonary fibrosis process.

The effects of coal dust exposure on DNA damage and repair of human bronchial epithelial cells.

To explore the effects of coal dust exposure on DNA damage and repair, human bronchial epithelial BEAS-2B cells were exposed to coal dust and the cellular response was investigated. It was found that γ-H2AX foci of DNA damage appeared, γ-H2AX protein level increased, and the rate of cell apoptosis was significantly elevated when BEAS-2B cells were exposed to coal dust for a short time. Phagocytized coal dust particles, swollen mitochondria, and reduced mitochondrial membrane potential were simultaneously identified. Moreover, Caspase-9, Caspase-3, and DFF45 proteins of the mitochondrial apoptotic pathway were activated. After the cells were exposed to coal dust chronically, phosphorylation levels of DNA repair kinases (ATM/ATR, DNA-PKcs) and downstream regulatory protein AKT were significantly upregulated. γ-H2AX foci and tail DNA of the cells following treatment with cisplatin were also reduced, and the colony formation rate was improved. It was concluded that coal dust could induce DNA damage, cause mitochondrial depolarization, and activate mitochondrial apoptosis pathways in BEAS-2B cells. Additionally, activated DNA repair kinases (ATM/ATR and DNA-PKcs) and their regulatory protein AKT increased DNA repair and proliferation of BEAS-2B cells chronically exposed to coal dust.

Respiratory traits and coal workers' pneumoconiosis: Mendelian randomisation and association analysis.

OBJECTIVES: Susceptibility loci of idiopathic pulmonary fibrosis and chronic obstructive pulmonary disease were also significantly associated with the predisposition of coal worker's pneumoconiosis (CWP) in recent studies. However, only a few genes and loci were targeted in previous studies. METHODS: To systematically evaluate the genetic associations between CWP and other respiratory traits, we reviewed the reported genome-wide association study loci of five respiratory traits and then conducted a Mendelian randomisation study and a two-stage genetic association study. RESULTS: Interestingly, we found that for each SD unit, higher lung function was associated with a 66% lower risk of CWP (OR=0.34, 95% CI: 0.15 to 0.77, p=0.010) using conventional Mendelian randomisation analysis (inverse variance weighted method). Moreover, we found susceptibility loci of interstitial lung disease (rs2609255, OR=1.29, p=1.61×10-4) and lung function (rs4651005, OR=1.39, p=1.62×10-3; rs985256, OR=0.73, p=8.24×10-4 and rs6539952, OR=1.28, p=4.32×10-4) were also significantly associated with the risk of CWP. Functional annotation showed these variants were significantly associated with the expression of FAM13A (rs2609255, p=7.4 ×10-4), ANGPTL1 (rs4651005, p=5.4 ×10-7), SPATS2L (rs985256, p=1.1 ×10-5) and RP11-463O9.9 (rs6539952, p=7.1 ×10-6) in normal lung tissues, which were related to autophagy pathway simultaneously according to enrichment analysis. CONCLUSIONS: These results provided a deeper understanding of the genetic predisposition basis of CWP.

An unusual tracheal foreign body in a middle-aged male with a 15-year history of coal use: a case report.

BACKGROUND: Long-term exposure to coal dust causes respiratory disease. In chest computer tomography (CT), pulmonary nodules, pulmonary interstitial fibrosis and emphysema manifest themselves. However, tracheal foreign bodies caused by coal dust are rarely reported. In this study, we report a special case of a tracheal coal foreign body, in which the patient has neither a history of coal work nor foreign body inhalation. CASE PRESENTATION: A 49-year-old man was diagnosed with chronic obstructive pulmonary disease (COPD) due to chronic cough and exertional dyspnoea. His symptoms gradually worsened despite treatment for COPD. Chest radiograph and CT images showed an irregular high-density nodule inserting fromthe trachea into the right thyroid at approximately the level of the 7th cervical vertebra. Fiberoptic bronchoscopy revealed that the tracheal lumen was mostly blocked. After the surgery, the energy spectrum CT quantitative analysis showed that the foreign body was likely that of a bituminous coal specimen. CONCLUSIONS: For cases in which a foreign body in the airway is highly suspected, early fiberoptic bronchoscopy and radiographic examinations should be performed as soon as possible to avoid misdiagnosis and ensure timely treatment.

Environment-friendly dual-network hydrogel dust suppressant based on xanthan gum, polyvinyl alcohol and acrylic acid.

Hydrogen bonding interactions among poly vinyl alcohol (PVA), xanthan gum (XG) and acrylic acid (AA) molecules have been utilized to prepare an environment-friendly interpenetrating double-network hydrogel dust suppressant (PVA-XG-PAA/SDBS) with the aim of enhancing the poor mechanical performance of current hydrogel dust suppressants. A single factor test was used to determine the optimal formulation conditions for the PVA-XG-PAA/SDBS, and the viscosity, surface tension, compression strength, wind resistance, water retention and biodegradability of the samples were measured. The results showed that the hydrogel with optimal usage contained 1.5 g, 0.1 g, and 6 g of PVA, XG and AA, respectively and the optimal reaction temperature was 55 °C. Under the optimal conditions, the viscosity was 45 mPa s, the surface tension was 30 mN/m, the compression strength of the dust suppressant-solidified coal pillar reached 126 kPa, and the degradation rate at the 8th cycle (40 days) after being buried in soil was 34%. Compared with a conventional hydrogel dust suppressant, like poly acrylic acid (PAA), and the dust suppressant sodium dodecyl benzene sulfonate (SDBS), the PVA-XG-PAA/SDBS showed better water retention, wind erosion resistance, and dust-solidifying properties. On the basis of these remarkable properties, the PVA-XG-PAA/SDBS is applicable for dust prevention during coal mining, transport, and storage, which enhances the dust suppression efficiency obviously and has significant meaning to the sustainable development of the coal mining industry while protecting the environment.

The impacts of coal dust on miners' health: A review.

As one of the most important energy resources in the world, coal contributes a great deal to the world economy. Coal mining and processing involve multiple dust generation processes including coal cutting, transport, crushing and milling etc. Coal dust is one of the main sources of health hazard for the coal workers. Exposure of coal dusts can be prevented through administrative controls and engineering controls. Ineffective control of coal dust exposure can harm coal workers' health. Although many efforts have been made to eliminate these threats, recent years have seen an unexpected increase in coal workers' pneumoconiosis (CWP) in Appalachian basin in US. To explore the reasons for this phenomenon, in this review, we first reviewed the historical studies on coal mine dust including the regulation and engineering controls. Then, the effects of coal dust on human health was comprehensively reviewed. Next, the effects of nanoparticles on human health were reviewed, with an emphasis on toxicity of nanoparticles such as carbon nanotubes in other industries. From all this information, we hypothesize that nano-sized coal dust has contributed to the increase of CWP prevalence in recent years. As no research has been reported in this area, four directions which may need further investigation and future studies are recommended in this review. They include: 1) Systematic characterization of physicochemical properties of nano-size coal dust; 2) Toxicity and pathogenesis of nano-sized coal dust; 3) Development of real-time monitoring technology and equipment for nano-sized coal dust; 4) Development of exposure control technology and equipment. The intent of this review paper is to demonstrate the variation of coal dust properties and their impact on the mine worker's health. We suggest that the impact of nano-sized coal mine dust on miner's health has not yet been understood well and further improvements are necessary.