Sterically Hindered Tetradentate [Pt(O

Described here are sterically hindered tetradentate [Pt(O^N^C^N)] emitters (Pt-1, Pt-2, and Pt-3) developed for stable and high-performance green phosphorescent organic light-emitting diodes (OLEDs). These Pt(II) emitters exhibit strong saturated green phosphorescence (λmax = 517-531 nm) in toluene and mCP thin films with emission quantum yields as high as 0.97, radiative rate constants (kr) as high as 4.4-5.3 × 105 s-1 and reduced excimer emission, and with a preferential horizontally oriented transition dipole ratio of up to 84%. Theoretical calculations show that p-(hetero)arene substituents at the periphery of the ligand scaffolds in Pt-1, Pt-2, and Pt-3 can i) enhance the spin-orbit coupling (SOC) between the lower singlet excited states and the T1 state, and S0→Sn (n = 1 or 2) transition dipole moment, and ii) introducing additional SOC activity and the bright 1ILCT[π(carbazole)→π*(N^C^N)] excited state (Pt-2 and Pt-3), which are the main contributors to the increased kr values. Utilizing these tetradentate Pt(II) emitters, green phosphorescent OLEDs are fabricated with narrow-band electroluminescence (FWHM down to 36 nm), high external quantum efficiency, current efficiency up to 27.6% and 98.7 cd A-1, and an unprecedented device lifetime (LT95) of up to 9270 h at 1000 cd m-2 under laboratory conditions.

Structure Engineering of Acridine Donor to Optimize Color Purity of Blue Thermally Activated Delayed Fluorescence Emitters.

9,9-Dimethyl-9,10-dihydroacridine (DMAC) is one of the most widely used electron donor for constructing high-performance thermally activated delayed fluorescence (TADF) emitters. However, DMAC-based emitters often suffer from the imperfect color purity, particularly in blue emitters, due to its strong electron-donating capability. To modulate donor strength, 2,7-F-Ph-DMAC and 2,7-CF3-Ph-DMAC were designed by introducing the electron-withdrawing 2-fluorophenyl and 2-(trifluoromethyl)phenyl at the 2,7-positions of DMAC. These donors were used, in combination with 2,4,6-triphenyl-1,3,5-triazine (TRZ) acceptor, to develop novel TADF emitters 2,7-F-Ph-DMAC-TRZ and 2,7-CF3-Ph-DMAC-TRZ. Compared to the F- or CF3-free reference emitter, both two emitters showed hypsochromic effect in fluorescence and comparable photoluminescence quantum yields without sacrificing the reverse intersystem crossing rate constants. In particular, 2,7-CF3-Ph-DMAC-TRZ based OLED exhibited a blue shift by up to 39 nm and significantly improved Commission International de l'Éclairage (CIE) coordinates from (0.36, 0.55) to (0.22, 0.41), while the external quantum efficiency kept stable at about 22.5 %. This donor engineering strategy should be valid for improving the color purity of large amount of acridine based TADF emitters. It can be predicted that pure blue TADF emitters should be feasible if these F- or CF3-modifed acridine donors are combined with other weaker electron acceptors.

Crystal Chemistry and Photoluminescent Aspects of Bright Orange Light Emitting Sm3+- Activated Ba2BiV3O11 Nanomaterials for Advanced Illuminating Applications.

In the present system, Sm3+ activated Ba2BiV3O11 nanomaterial series radiating orange-red light was developed via an efficient approach of solution combustion method. The structural examinations using XRD analysis indicate that the sample is crystallized into the monoclinic phase with the P21/a (14) space group. The elemental composition and morphological conduct were studied via energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM) respectively. Also, the formation of nanoparticles was confirmed by transmission electron microscopy (TEM). Photoluminescent (PL) examinations reveal the orange-red emission from the developed nanocrystals via documenting the emission spectra, which reveals the peak at 606 nm due to the 4G5/2 → 6H7/2 transition. Further, the decay time, non-radiative rates, quantum efficiency, and band gap of the optimal sample were computed as 1.3263 ms, 219.5 s- 1, 70.88%, and 3.41 eV respectively. Finally, the chromatic parameters including color - coordinates (0.5565, 0.4426), 1975 K color correlated temperature (CCT), and color purity (85.58%) reflected their excellent luminous performance. The above-mentioned outcomes endorsed the relevancy of the developed nanomaterials as a propitious agent in the engineering of advanced illuminating optoelectronic appliances.

Exploring the role of neutral ligands in modulating the photoluminescence of samarium complexes with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione.

Four eight-coordinated luminescent samarium complexes of type [Sm(hfpd)3L2] and [Sm(hfpd)3L'] [where hfpd = 1,1,1,5,5,5-Hexafluoro-2,4-pentanedione L = tri-octyl-phosphine oxide (TOPO) and L' = 1,10-phenanthroline (phen), neocuproine (neoc) and bathocuproine (bathoc) were synthesized via a stoichiometrically controlled approach. This allows for precise control over the stoichiometry of the complexes, leading to reproducible properties. This investigation focuses on understanding the impact of secondary ligands on the luminescent properties of these complexes. Infrared (IR) spectra provided information about the molecular structures, whereas 1H and 13C nuclear magnetic resonance (NMR) spectra confirmed these structural details along with the coordination of ligands to trivalent Sm ion. The UV-vis spectra revealed the molar absorption coefficient and absorption bands associated with the hfpd ligand and photoluminescence (PL) spectroscopy demonstrated intense orange-red emission (648 nm relative to 4G5/2 → 6H9/2) from the complexes. The Commission Internationale de l'Éclairage (CIE) triangles indicated that the complexes emitted warm orange red light with color coordinates (x, y) ranging from (0.62, 0.36) to (0.40, 0.27). The investigation of the band gap as well as color parameters confirms the utility of these complexes in displays and LEDs.

High Color-Purity and Efficient Pure-Blue Perovskite Light-Emitting Diodes Based on Strongly Confined Monodispersed Quantum Dots.

Here, we develop an in situ photoluminescence (PL) system to monitor the nucleation and growth of perovskite nanocrystals and control the monomer supply rate to achieve strongly confined and monodispersed quantum dots (QDs) with average size of 3.4 nm. Pure-blue (460 nm wavelength) CsPbBr3 QDs with near unity PL quantum yield and narrow size distribution (small size dispersion of 9.6%) were thus produced. Light-emitting diodes (LEDs) based on these QDs were prepared by using an all-solution processing route, which showed narrow electroluminescence with full width at half-maximum of 20 nm and a high color purity of 97.3%. The device also had a high external quantum efficiency of 10.1%, maximum luminance of 11 610 cd m-2, and continuous operation lifetime of 21 h at the initial luminance of 102 cd m-2, corresponding to the state-of-art for pure-blue perovskite LEDs.

Reducing Emission Linewidth of Pure-Blue ZnSeTe Quantum Dots through Shell Engineering toward High Color Purity Light-Emitting Diodes.

High color purity blue quantum dot light-emitting diodes (QLEDs) have great potential applications in the field of ultra-high-definition display. However, the realization of eco-friendly pure-blue QLEDs with a narrow emission linewidth for high color purity remains a significant challenge. Herein, a strategy for fabricating high color purity and efficient pure-blue QLEDs based on ZnSeTe/ZnSe/ZnS quantum dots (QDs) is presented. It is found that by finely controlling the internal ZnSe shell thickness of the QDs, the emission linewidth can be narrowed by reducing the exciton-longitudinal optical phonon coupling and trap states in the QDs. Additionally, the regulation of the QD shell thickness can suppress the Förster energy transfer between QDs in the QLED emission layer, which will help to reduce the emission linewidth of the device. As a result, the fabricated pure-blue (452 nm) ZnSeTe QLED with ultra-narrow electroluminescence linewidth (22 nm) exhibit high color purity with the Commission Internationale de l'Eclairage chromatic coordinates of (0.148, 0.042) and considerable external quantum efficiency (18%). This work provides a demonstration of the preparation of pure-blue eco-friendly QLEDs with both high color purity and efficiency, and it is believed that it will accelerate the application process of eco-friendly QLEDs in ultra-high-definition displays.

Synthesis of green emissive terbium(III) complexes for displays: Optical, electrochemical and photoluminescent analysis.

A series of heteroleptic terbium(III) complexes with fluorinated 2-thenoyltrifluoroacetone (TTFA) and other heteroaromatic units have been synthesized. The developed heteroleptic complexes were inspected via elemental study, cyclic voltammetry, thermal analysis and spectroscopic investigations. Optical band-gap data proposed the conducting property of prepared complexes. The photoluminescence emission profiles illustrated peaks based on terbium(III) cation (Tb3+ ) positioned at ~617, 586, 546 and 491 nm, imputed to 5 D4 to 7 FJ (J = 3,4,5,6) transitions separately. Most intense peak at 546 nm corresponding to 5 D4 → 7 F5 transition is accountable for the green emissive character of developed complexes. The luminous character of complexes reveals the sensitization of Tb3+ by ligands. Color parameters further corroborates the green emanation of Tb3+ complexes. The photometric characteristics of complexes recommended their usages in designing display devices.

Synthesis and photometric properties of efficient white-emitting phosphor of M-AMG transition metal complexes for OLED applications.

Progression in lighting sources mainly depended on new, robust energy-efficient diodes due to their advanced photometric properties. All organic light-emitting sources are constant energy-efficient devices and will be the light of the future. We explore the potential of transition metal complexes by focusing on cobalt(II), nickel(II), and copper (II) with aminoguanidine naphthoate as white phosphors in organic light-emitting diodes (OLEDs). The phosphors synthesized at optimized temperature were characterized structurally and thermally by spectral, thermal, and diffraction techniques. The photophysical studies of the target compound in several organic solvents having divergent polarity were also studied, and the results were exhibited. Photometric properties of the complexes were studied using photoluminescence, CIE (Commission internationale de l'éclairage) chromaticity coordinates, correlated color temperature, color purity, Duv, and TLCI (Television Lighting Consistency Index) to verify the applicability of complexes as phosphors. Excellent luminescence property with a high coloring index for (Cu(2NA-AMG-2H2 O)) opens the advanced avenue for light sources and serves as vital constituents for light-emitting diodes.

Orthogonal Trichromatic Upconversion with High Color Purity in Core-Shell Nanoparticles for a Full-Color Display.

Materials with tunable emission colors has attracted increasing interest in both fundamental research and applications. As a key member of light-emitting materials family, lanthanide doped upconversion nanoparticles (UCNPs) have been intensively demonstrated to emit light in any color upon near-infrared excitation. However, realizing the trichromatic emission in UCNPs with a fixed composition remains a great challenge. Here, without excitation pulsed modulation and three different near-infrared pumping, we report an experimental design to fine-control emission in the full color gamut from core-shell-structured UCNPs by manipulating the energy migration through dual-channel pump scheme. We also demonstrate their potential application in full-color display. These findings may benefit the future development of convenient and versatile optical methos for multicolor tuning and open up the possibility of constructing full-color volumetric display systems with high spatiotemporal resolution.

Precise Regulation of Emission Maxima and Construction of Highly Efficient Electroluminescent Materials with High Color Purity.

Advanced multiple resonance induced thermally activated delayed fluorescence (MR-TADF) emitters have emerged as a privileged motif for applications in organic light-emitting diodes (OLEDs), because they furnish highly tunable TADF characteristics and high color purity emission. Herein, based on the unique nitrogen-atom embedding molecular engineering (NEME) strategy, a series of compounds BN-TP-Nx (x=1, 2, 3, 4) have been customized. The nitrogen-atom anchored at different position of triphenylene hexagonal lattice entails varying degrees of perturbation to the electronic structure. The newly-constructed emitters have demonstrated the precise regulation of emission maxima of MR-TADF emitters to meet the actual industrial demand, and further enormously enriched the MR-TADF molecular reservoir. The BN-TP-N3-based OLED exhibits ultrapure green emission, with peak of 524 nm, full-width at half-maximum (FWHM) of 33 nm, Commission Internationale de L'Eclairage (CIE) coordinates of (0.23, 0.71), and maximum external quantum efficiency (EQE) of 37.3 %.

Pressure-Tuned Multicolor Emission of 2D Lead Halide Perovskites with Ultrahigh Color Purity.

The chemical diversity and structural flexibility of lead halide perovskites (LHPs) offer tremendous opportunities to tune their optical properties through internal molecular engineering and external stimuli. Herein, we report the wide-range and ultrapure photoluminescence emissions in a family of homologous 2D LHPs, [MeOPEA]2 PbBr4-4x I4x (MeOPEA=4-methoxyphenethylammonium; x=0, 0.2, 0.425, 0.575, 1) enabled through internal chemical pressure and external hydrostatic pressure. The chemical pressure, induced by the C-H⋅⋅⋅π interactions and halogen doping/substitution strengthens the structural rigidity to give sustained narrow emissions, and regulates the emission energy, respectively. Further manipulation of physical pressure leads to wide-range emission tuning from 412 to 647 nm in a continuous and reversible manner. This work could open up new pathways for developing 2D LHP emitters with ultra-wide color gamut and high color purity which are highly useful for pressure sensing.

Multi-Resonance Building-Block-Based Electroluminescent Material: Lengthening Emission Maximum and Shortening Delayed Fluorescence Lifetime.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) materials are considered a class of organic materials with exceptional electronic and optical properties, which make them promising for the applications in organic light-emitting diodes (OLEDs). In this study, we improved, synthesized, and characterized a multiple-resonance type emitter based on the assembly of MR-building blocks (MR-BBs). By optimizing the geometric arrangement of MR-BBs, we were able to generate narrowband emission in the longer wavelength region and shorten the delayed excited-state lifetime, resulting in improved emission efficiency compared to the parent molecule. Our proof-of-concept molecule, m-DBCz, exhibited narrowband yellowish-green TADF emission with a full width at half-maximum of 32 nm and a small singlet-triplet energy gap of 0.04 eV. The OLED developed using m-DBCz as the emitter demonstrated electroluminescence at 548 nm and achieved a high external quantum efficiency (EQE) of 34.9 %. Further optimization of the device resulted in a high external quantum efficiency of 36.3 % and extremely low efficiency roll-off, with EQE values of 30.1 % and 27.7 % obtained even at high luminance levels of 50 000 and 100 000 cd m-2 . These results demonstrate the full potential of MR-TADF materials for applications on ultrahigh-luminance OLEDs.

Synthesis, Optoelectronic and Photoluminescent Characterizations of Green Luminous Heteroleptic Ternary Terbium Complexes.

This article presents four ternary terbium complexes based on fluorinated 2-thenoyltrifluoroacetone (TTFA) and N donor bidentate neutral ligands. The prepared complexes were examined by elemental study, electrochemical analysis, spectroscopically and thermo-gravimetrically. Spectral analysis shows the bonding of Tb3+ ion with oxygen and nitrogen atom of diketone and neutral ligand respectively. Upon excitation in UV region, synthesized terbium complexes show luminescence in green region of electromagnetic spectrum. Photoluminescence emission spectra of complexes do not show any ligand based peak suggesting the effective transferal of energy from ligand to metal ion. Green emanation by terbium complexes is owing to intense peak ~547 nm (5D4 → 7F5). The outcome of emission data and CIE coordinates correlate with each other and affirms the utility of green luminous complexes as potential emissive material for optoelectronic gadgets applied in lighting system.

Electrochromic Metamaterials of Metal-Dielectric Stacks for Multicolor Displays with High Color Purity.

Inorganic electrochromic (EC) materials with vibrant multicolor change that are compatible with large-scale processing have been at the forefront of EC technology and are crucial in a wide range of applications, such as displays and camouflage. However, limited strategies are available to realize such inorganic materials, and challenges such as low color purity are yet to be overcome. Here, we demonstrate multilayered metal-dielectric metamaterials (MMDMs) as a new family of inorganics-based EC materials to achieve dynamic alternation among multicolors with high contrast and high color purity, which are structurally realized by significantly enhancing the confinement of the incident light in specific optical frequencies. This multilayer structure renders high reflectivity (75%), high quality factor (7.4), and a full width at half-maximum of 60 nm before coloration and presents a color gamut at least 40% wider than that of previously reported metamaterials after coloration, indicating good color quality.

Crystal Structure and Optical Properties of ZnO:Ce Nano Film.

ZnO and cerium-doped ZnO on a glass substrate have been prepared by the sol-gel method using the spin coating technique and water bath growth process. Ce-doping concentration on film structure, morphology, and optical properties is investigated. The result indicated that the hexagonal wurtzite ZnO with high crystalline quality formed on the substrate. The crystal parameters a and c decreased, crystal size increased, and the compressive strain formed after Ce-doping. Formed un-, 3%, 6%, 12% Ce-doped ZnO film has a spherical shape with a size between 8.6-31, 14-52, 18-56, and 20-91 nm, respectively. All films had good absorption of 300-400 nm ultraviolet light, in particular, the absorption of near ultraviolet (370-400 nm) increased after doping of Ce. The transmittance of light between 400-800 nm decreased with Ce-doping concentration. The band gap energy increased after Ce-doping reaching better optical behavior for preparing ZnO heterostructured thin-film. All film emitted intense blue emission under 375 nm excitation at room temperature. This indicated the film can have application in optoelectronic devices.

Ca[B8 O11 (OH)4 ] : Eu2+ - A Highly Efficient Deep Blue-Emitting Phosphor Prepared by Low-Temperature Self-reduction.

Highly efficient inorganic phosphors are crucial for solid-state lighting. In this paper, a new method of low-temperature self-reduction was used for preparing a highly efficient deep blue-emitting phosphor of Ca[B8 O11 (OH)4 ] : Eu2+ (CBH : Eu2+ ). The crystal structure, morphology, chemical state, and photoluminescence (PL) properties of the CBH : Eu2+ phosphor have been investigated. By using the screened hybrid function (HSE06), the band gap (Eg ) of CBH was calculated to be 7.48 eV, which is a necessary condition for achieving high quantum yield phosphors. The experiment results show that almost all the added raw materials of Eu3+ can be reduced to Eu2+ in CBH crystal under a non-reducing atmosphere. The CBH : Eu2+ phosphor shows a broad excitation spectrum centered at 277 and 327 nm in the range of 220 to 400 nm, and a narrow-band emission spectrum centered at 428 nm in the range of 400 to 500 nm, with a full width at half maximum (fwhm) of 42.35 nm. Under UV radiation, the CBH : 2 %Eu2+ exhibits high photoluminescence quantum yield (PLQY=95.0 %), high external quantum efficiency (EQE=31.1 %), and ultra-high color purity (97.6 %). The PL intensity of CBH : 2 %Eu2+ remains 62.6 % of the initial intensity at 150 °C. Finally, the white light-emitting diodes (WLED) fabricated by CBH : 2 %Eu2+ , excited by a 365 nm chip, presents outstanding performances with a luminous efficacy (LE) of 13.9 lm/W, a color rendering index (CRI) of 89.4, and a correlated color temperature (CCT) of 5825 K. The above results show that CBH : Eu2+ can be used as a promising blue phosphor for WLED. This new method of low-temperature self-reduction can be applied to design and prepare other new types of highly efficient phosphors.

Effect of Host Moieties on the Phosphorescent Spectrum of Green Platinum Complex.

Highly efficient, operationally stable, and pure-color organic light-emitting diodes (OLEDs) are of considerable significance for developing practical wide-color-gamut displays. Further, we have demonstrated the feasibility of an efficient pure green phosphorescent OLED (PHOLED) by employing a narrow-band platinum complex and a top-emitting structure. The utilization of the thermally activated delayed fluorescence (TADF) material as the phosphorescent host is expected to serve as a promising solution for obtaining operationally stable PHOLEDs with high color purity. However, the emission spectrum of the platinum complex in the TADF host exhibits a considerably broad emission spectrum. This study investigates the cause of the spectral change by evaluating the photoluminescence spectra of the platinum complex in various hosts exhibiting different molecular structures. The triazine unit in the host material was observed to result in exciplex formation between the lowest unoccupied molecular orbital (LUMO) of the host and the highest occupied molecular orbital (HOMO) of the platinum complex. Therefore, the TADF material that sterically hinders the triazine unit is considered to be suitable to prevent both exciplex formation and spectral broadening.

Energy transfer rate and electron-phonon coupling properties in Eu3+ -doped nanophosphors.

A series of controllable emissions SrWO4 :Eu3+ and charge-compensated SrWO4 : Eum3+ (m = 0.01 or 0.20) phosphors was successfully prepared via a simple co-precipitation method. The energy transfer mechanism was studied based on the Huang's theory. A low magnitude of Huang-Rhys factor (10-2 ) was calculated using phonon sideband spectra. The Judd-Ofelt parameters Ωλ (λ = 2, 4 and 6) of Eu3+ -activated SrWO4 doped with charge compensation were obtained. The calculated Commission Internationale de l'Eclairage chromaticity coordinates were found to be about (0.67, 0.33) for SrWO4 : Eu0.203+ and charge-compensated SrWO4 : Eu0.203+ phosphors, which coincided with the National Television Standard Committee system standard values for red. A white light emission was obtained under 362 nm excitation. The correlated color temperature was computed by a simple equation to characterize light sources. Thus, warm white light-emitting diodes with higher Ra can be constructed by combining as-prepared high efficiency, low correlated color temperature and high color purity phosphor.

Narrowband Organic Afterglow via Phosphorescence Förster Resonance Energy Transfer for Multifunctional Applications.

Achieving multicolor organic afterglow materials with narrowband emission and high color purity is important in various optoelectronic fields but remains a great challenge. Here, an efficient strategy is presented to obtain narrowband organic afterglow materials via Förster resonance energy transfer from long-lived phosphorescence donors to narrowband fluorescence acceptors in a polyvinyl alcohol matrix. The resulting materials exhibit narrowband emission with a full width at half maximum (FWHM) as small as 23 nm and the longest lifetime of 721.22 ms. Meanwhile, by pairing the appropriate donors and acceptors, multicolor and high color purity afterglow ranging from green to red with the maximum photoluminescence quantum yield of 67.1% are achieved. Moreover, given their long luminescence lifetime, high color purity, and flexibility, the potential applications are demonstrated in high-resolution afterglow displays and dynamic and quick information identification in low-light conditions. This work provides a facile approach for developing multicolor and narrowband afterglow materials as well as expands the features of organic afterglow.

Use of Recycling-Reflection Color-Purity Enhancement Film to Improve Color Purity of Full-Color Micro-LEDs.

A common full-color method involves combining micro-light-emitting diodes (LEDs) chips with color conversion materials such as quantum dots (QDs) to achieve full color. However, during color conversion between micro-LEDs and QDs, QDs cannot completely absorb incident wavelengths cause the emission wavelengths that including incident wavelengths and converted wavelength through QDs, which compromises color purity. The present paper proposes the use of a recycling-reflection color-purity-enhancement film (RCPEF) to reflect the incident wavelength multiple times and, consequently, prevent wavelength mixing after QDs conversion. This RCPEF only allows the light of a specific wavelength to pass through it, exciting blue light is reflected back to the red and green QDs layer. The prototype experiment indicated that with an excitation light source wavelength of 445.5 nm, the use of green QDs and RCPEFs increased color purity from 77.2% to 97.49% and light conversion efficiency by 1.97 times and the use of red QDs and RCPEFs increased color purity to 94.68% and light conversion efficiency by 1.46 times. Thus, high efficiency and color purity were achieved for micro-LEDs displays.