Ecofriendly biosynthesis of copper nanoparticles from novel marine S. rhizophila species for enhanced antibiofilm, antimicrobial and antioxidant potential.

Marine microorganisms offer a promising avenue for the eco-friendly synthesis of nanoparticles due to their unique biochemical capabilities and adaptability to various environments. This study focuses on exploring the potential of a marine bacterial species, Stenotrophomonas rhizophila BGNAK1, for the synthesis of biocompatible copper nanoparticles and their application for hindering biofilms formed by monomicrobial species. The study begins with the isolation of the novel marine S. rhizophila species from marine soil samples collected from the West coast region of Kerala, India. The isolated strain is identified through 16S rRNA gene sequencing and confirmed to be S. rhizophila species. Biosynthesis of copper nanoparticles using S. rhizophila results in the formation of nanoparticles with size of range 10-50 nm. The nanoparticles exhibit a face-centered cubic crystal structure of copper, as confirmed by X-Ray Diffraction analysis. Furthermore, the synthesized nanoparticles display significant antimicrobial activity against various pathogenic bacteria and yeast. The highest inhibitory activity was against Staphylococcus aureus with a zone of 27 ± 1.00 mm and the least activity was against Pseudomonas aeruginosa with a zone of 22 ± 0.50 mm. The zone of inhibition against Candida albicans was 16 ± 0.60 mm. The antibiofilm activity against biofilm-forming clinical pathogens was evidenced by the antibiofilm assay and SEM images. Additionally, the copper nanoparticles exhibit antioxidant activity, as evidenced by their scavenging ability against DPPH, hydroxyl, nitric oxide, and superoxide radicals, as well as their reducing power in the FRAP assay. The study highlights the potential of the marine bacterium S. rhizophila BGNAK1 for the eco-friendly biosynthesis of copper nanoparticles with diverse applications. Synthesized nanoparticles exhibit promising antibiofilm, antimicrobial, and antioxidant properties, suggesting their potential utility in various fields such as medicine, wastewater treatment, and environmental remediation.

Essential oil mediated synthesis and application of highly stable copper nanoparticles as coatings on textiles and surfaces for rapid and sustained disinfection of microorganisms.

Rampant pathogenesis induced by communicable microbes has necessitated development of technologies for rapid and sustained disinfection of surfaces. Copper nanoparticles (CuNPs) have been widely reported for their antimicrobial properties. However, nanostructured copper is prone to oxidative dissolution in the oil phase limiting its sustained use on surfaces and coatings. The current study reports a systematic investigation of a simple synthesis protocol using fatty acid stabilizers (particularly essential oils) for synthesis of copper nanoparticles in the oil phase. Of the various formulations synthesized, rosemary oil stabilized copper nanoparticles (RMO CuNPs) were noted to have the best inactivation kinetics and were also most stable. Upon morphological characterization by TEM and EELS, these were found to be monodispersed (φ5-8 nm) with copper coexisting in all three oxidation states on the surface of the nanoparticles. The nanoparticles were drop cast on woven fabric of around 500 threads per inch and exposed to gram positive bacteria (Staphylococcus aureus), gram negative bacteria (Escherichia coliandPseudomonas aeruginosa), enveloped RNA virus (phi6), non-enveloped RNA virus (MS2) and non-enveloped DNA virus (T4) to encompass the commonly encountered groups of pathogens. It was possible to completely disinfect 107copies of all microorganisms within 40 min of exposure. Further, this formulation was incorporated with polyurethane as thinners and used to coat non-woven fabrics. These also exhibited antimicrobial properties. Sustained disinfection with less than 9% cumulative copper loss for upto 14 washes with soap water was observed while the antioxidant activity was also preserved. Based on the studies conducted, RMO CuNP in oil phase was found to have excellent potential of integration on surface coatings, paints and polymers for rapid and sustained disinfection of microbes on surfaces.

Antimicrobial activity of metal-based nanoparticles: a mini-review.

The resistance of pathogenic microorganisms to antibiotics is one of the main problems of world health. Of particular concern are multidrug-resistant (MDR) bacteria. Infections caused by these microorganisms affect the appearance of acute or chronic diseases. In this regard, modern technologies, such as nanomaterials (NMs), especially promising nanoparticles (NPs), can possess antimicrobial properties or improve the effectiveness and delivery of known antibiotics. Their diversity and characteristics, combined with surface functionalization, enable multivalent interactions with microbial biomolecules. This article presents an overview of the most current research on replacing antibiotics with NPs, including the prospects and risks involved.

Bafi A1 inhibits nano-copper oxide-induced mitochondrial damage by reducing the release of copper from lysosomes.

This study demonstrated that both copper oxide nanoparticles (CuO-NPs) and copper nanoparticles (Cu-NPs) can cause swelling, inflammation, and cause damage to the mitochondria of alveolar type II epithelial cells in mice. Cellular examinations indicated that both CuO-NPs and Cu-NPs can reduce cell viability and harm the mitochondria of human bronchial epithelial cells, particularly Beas-2B cells. However, it is clear that CuO-NPs exhibit a more pronounced detrimental effect compared with Cu-NPs. Using bafilomycin A1 (Bafi A1), an inhibitor of lysosomal acidification, was found to enhance cell viability and alleviate mitochondrial damage caused by CuO-NPs. Additionally, Bafi A1 also reduces the accumulation of dihydrolipoamide S-acetyltransferase (DLAT), a marker for mitochondrial protein toxicity, induced by CuO-NPs. This observation suggests that the toxicity of CuO-NPs depends on the distribution of copper particles within cells, a process facilitated by the acidic environment of lysosomes. The release of copper ions is thought to be triggered by the acidic conditions within lysosomes, which aligns with the lysosomal Trojan horse mechanism. However, this association does not seem to be evident with Cu-NPs.

Copper and nanocopper toxicity using integrated biomarker response in Pangasianodon hypophthalmus.

The current study focused on assessing the toxicological effects of copper (Cu) and copper nanoparticles (Cu-NPs) in acute condition on Pangasianodon hypophthalmus. The median lethal concentration (LC50 ) for Cu and Cu-NPs were determined as 8.04 and 3.85 mg L-1 , respectively. For the subsequent definitive test, varying concentrations were selected: 7.0, 7.5, 8.0, 8.5, and 9.0 mg L-1 for Cu, and 3.0, 3.3, 3.6, 3.9, and 4.2 mg L-1 for Cu-NPs. To encompass these concentration levels and assess their toxic effects, biomarkers associated with toxicological studies like oxidative stress, neurotransmission, and cellular metabolism were measured in the liver, kidney, and gill tissues. Notably, during the acute test, the activities of catalase, superoxide dismutase, glutathione-s-transferase, glutathione peroxidase, and lipid peroxide in the liver, gill, and kidney tissues were significantly increased due to exposure to Cu and Cu-NPs. Similarly, acetylcholinesterase activity in the brain was notably inhibited in the presence of Cu and Cu-NPs when compared to the control group. Cellular metabolic stress was greatly influenced by the exposure to Cu and Cu-NPs, evident from the considerable elevation of cortisol, HSP 70, and blood glucose levels in the treated groups. Furthermore, integrated biomarker response, genotoxicity, DNA damage in gill tissue, karyotyping in kidney tissue, and histopathology in gill and liver were investigated, revealing tissue damage attributed to exposure to Cu and Cu-NPs. In conclusion, this study determined that elevated concentrations of essential trace elements, namely Cu and Cu-NPs, induce toxicity and disrupt cellular metabolic activities in fish.

Green synthesis of copper nanoparticles by using pineapple peel waste: in vitro characterizations and antibacterial potential.

A considerable amount of fruit waste is being produced every day worldwide. The green synthesis of metal nanoparticles from fruit peel waste can be an innovative, cost-effective, and eco-friendly alternative to traditional methods. Copper nanoparticles (CuNPs) were synthesized by a green method using the pineapple peels extract (PLX) and copper sulfate pentahydrate. The formation of CuNPs was visually identified and detected by UV-Visible spectroscopy. The CuNPs were characterized by Fourier-transform infrared (FTIR) spectroscopy, particle size analyzer, scanning electron microscopy (SEM), and X-ray diffraction (XRD). The antioxidant and reducing power of CuNPs were conducted by %DPPH scavenging and electron transfer-based ferric reducing antioxidant power (FRAP) assay, respectively. The antibacterial properties of CuNPs were determined in gram-positive, and gram-negative bacteria. The results showed that the CuNPs were spherical in shape with mean particle size 290.5 nm. The zeta potential of the nanoparticles was found to be - 12.3 mV indicating the instability in the colloidal state. The FTIR study confirmed the peaks of phytochemicals present in the PLX and the nanoparticles supporting the use of pineapple peels as stabilizing, reducing and capping agents. Both the DPPH and reducing power assay depicted that the synthesized CuNPs had significant antioxidant activity. However, the synthesized CuNPs had strong inhibitory capacity against both gram-positive and gram-negative test organisms. Thus, the CuNPS could be used for its viable antibacterial potential to preserve fruits, flowers, and vegetables from bacterial contamination.

Biosynthesis, characterization, and anticoagulant properties of copper nanoparticles from red seaweed of Acanthophora sp.

INTRODUCTION: In the last few decades, nanoparticles have found extensive use in a variety of biological applications. Traditional medicine widely uses Acanthophora sp., a marine macroalgae, to cure and prevent diabetes, skin disorders, and blood clotting. OBJECTIVE: The present study aims to investigate whether green-synthesized copper nanoparticles (CuNPs) might work as an anticoagulant. METHODOLOGY: The CuNPs were made using an environmentally friendly method that uses Acanthophora extract. We used UV-vis spectroscopy to assess the surface plasmon resonance of the material, scanning electron microscopy (SEM) to analyze its form, and energy dispersive X-ray (EDX) spectroscopy to identify the material's constituent elements. Furthermore, Fourier-transform infrared (FT-IR) determined the functional groups of the CuNPs. RESULTS: The biosynthesis of CuNPs was confirmed by UV-vis spectroscopy, which showed a surface plasmon resonance peak at 570 nm. The FT-IR analysis showed that certain functional groups are involved in the formation of CuNPs. These groups include OH stretching, C=O stretching, C-H bonding, C-N bonding, and Cu vibration. SEM analysis demonstrated the morphology of CuNPs synthesized, with a size of 0.5 µm, while EDS analysis confirmed their purity. The anticoagulant activity of prothrombin time (PT) and activated partial thromboplastin time (aPTT) assays showed that the clotting time got longer depending on the concentration. The CuNPs synthesized from Acanthophora had strong anticoagulant effects at 100 µg/mL, further suggesting that they might be useful as a natural blood thinner. CONCLUSION: The interesting thing we observed is that the green-synthesized CuNPs made from Acanthophora extract could be used in anticoagulation therapy.

Evaluation of a Voltametric E-Tongue Combined with Data Preprocessing for Fast and Effective Machine Learning-Based Classification of Tomato Purées by Cultivar.

The potential of a voltametric E-tongue coupled with a custom data pre-processing stage to improve the performance of machine learning techniques for rapid discrimination of tomato purées between cultivars of different economic value has been investigated. To this aim, a sensor array with screen-printed carbon electrodes modified with gold nanoparticles (GNP), copper nanoparticles (CNP) and bulk gold subsequently modified with poly(3,4-ethylenedioxythiophene) (PEDOT), was developed to acquire data to be transformed by a custom pre-processing pipeline and then processed by a set of commonly used classifiers. The GNP and CNP-modified electrodes, selected based on their sensitivity to soluble monosaccharides, demonstrated good ability in discriminating samples of different cultivars. Among the different data analysis methods tested, Linear Discriminant Analysis (LDA) proved to be particularly suitable, obtaining an average F1 score of 99.26%. The pre-processing stage was beneficial in reducing the number of input features, decreasing the computational cost, i.e., the number of computing operations to be performed, of the entire method and aiding future cost-efficient hardware implementation. These findings proved that coupling the multi-sensing platform featuring properly modified sensors with the custom pre-processing method developed and LDA provided an optimal tradeoff between analytical problem solving and reliable chemical information, as well as accuracy and computational complexity. These results can be preliminary to the design of hardware solutions that could be embedded into low-cost portable devices.

Copper-Nanoparticle-Induced Neurotoxic Effect and Oxidative Stress in the Early Developmental Stage of Zebrafish (Danio rerio).

Copper nanoparticles (CuNPs) are extensively used in electronics, cosmetics, fungicides, and various other fields due to their distinctive qualities. However, this widespread usage can contribute to environmental contamination and heightened health risks for living organisms. Despite their prevalent use, the ecological impacts and biosafety of CuNPs remain inadequately understood. The present study aims to delve into the potential toxic effects of CuNPs on zebrafish (Danio rerio) embryos, focusing on multiple indexes such as embryonic development, neurotoxicity, oxidative stress, and inflammatory response. The results revealed a notable increase in the death rate and deformity rate, alongside varying degrees of decrease in hatching rate and heart rate following CuNPs exposure. Particularly, the frequency of spontaneous tail coiling significantly declined under exposure to CuNPs at concentrations of 500 µg/L. Furthermore, CuNPs exposure induced alterations in the transcriptional expression of GABA signaling pathway-related genes (gabra1, gad, abat, and gat1), indicating potential impacts on GABA synthesis, release, catabolism, recovery, and receptor binding. Additionally, CuNPs triggered oxidative stress, evidenced by disruption in superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GPx) activities, along with elevated malondialdehyde (MDA) levels. This oxidative stress subsequently led to a proinflammatory cascade, as demonstrated by the increased transcriptional expression of inflammatory markers (il-1ß, tnf-α, il-6, and il-8). Comparative analysis with copper ion (provided as CuCl2) exposure highlighted more significant changes in most indexes with CuCl2, indicating greater toxicity compared to CuNPs at equivalent concentrations. In conclusion, these findings provide valuable insights into the toxic effects of CuNPs on zebrafish embryo development and neurotransmitter conduction. Furthermore, they present technical methodologies for assessing environmental and health risks associated with CuNPs, contributing to a better understanding of their biosafety and ecological impact.

Fabrication of Cu/ZnO-loaded chitosan hydrogel for an effective wound dressing material to advanced wound care and healing efficiency after caesarean section surgery.

Wound infections and delayed complications after caesarean section surgical procedure to mothers would have a prevalence of discomfort, stress and dissatisfaction in the postpartum period. In this report, one-pot synthesis is used for the preparation of chitosan (CS)-based copper nanoparticles (nCu), which was used for the preparation of zinc oxide (ZnO) hydrogel as wound dressing materials after surgery. The antibacterial activity of (CS-nCu/ZnO) developed hydrogels was studied zone of inhibition, against gram-positive and gram-negative bacteria. The antibacterial activity of the CS-nCu/ZnO hydrogel demonstrated that nanoformulated hydrogel materials have provided excellent bactericidal action against clinically approved bacterial pathogens. The biocompatibility and in vitro wound healing potential of the developed wound closure materials were studied by MTT assay and wound scratch assay methods, respectively. The MTT assay and cell migration assay results demonstrated that CS-nCu/ZnO hydrogel material induces cell compatibility and effective cell proliferation ability. These findings suggest that the CS-nCu/ZnO hydrogel outperforms CS-ZnO in terms of wound healing and could be used as a wound closure material in caesarean section wound treatment.

Bacillus altitudinis-Stabilized Multifarious Copper Nanoparticles Prevent Bacterial Fruit Blotch in Watermelon (Citrullus lanatus L.): Direct Pathogen Inhibition, In Planta Particles Accumulation, and Host Stomatal Immunity Modulation.

The nano-enabled crop protecting agents have been emerging as a cost-effective, eco-friendly, and sustainable alternative to conventional chemical pesticides. Here, the antibacterial activity and disease-suppressive potential of biogenic copper nanoparticles (bio-CuNPs) against bacterial fruit blotch (BFB), caused by Acidovorax citrulli (Ac), in watermelon (Citrullus lanatus L.) is discussed. CuNPs are extracellularly biosynthesized using a locally isolated bacterial strain Bacillus altitudinis WM-2/2, and have spherical shapes of 29.11-78.56 nm. Various metabolites, such as alcoholic compounds, carboxylic acids, alkenes, aromatic amines, and halo compounds, stabilize bio-CuNPs. Foliar application of bio-CuNPs increases the Cu accumulation in shoots/roots (66%/27%), and promotes the growth performance of watermelon plants by improving fresh/dry weight (36%/39%), through triggering various imperative physiological and biochemical processes. Importantly, bio-CuNPs at 100 µg mL-1 significantly suppress watermelon BFB through balancing reactive oxygen species system, improving photosynthesis capacity, and modulating stomatal immunity. Bio-CuNPs show obvious antibacterial activity against Ac by inducing oxidative stress, biofilm inhibition, and cellular integrity disruption. These findings demonstrate that bio-CuNPs can suppress watermelon BFB through direct antibacterial activity and induction of active immune response in watermelon plants, and highlight the value of this approach as a powerful tool to increase agricultural production and alleviate food insecurity.

Highly conductive copper films prepared by multilayer sintering of nanoparticles synthesized via arc discharge.

The major challenges in producing highly electrically conductive copper films are the oxide content and the porosity of the sintered films. This study developed a multilayer sintering method to remove the copper oxides and reduce copper film porosity. We used a self-built arc discharge reactor to produce copper nanoparticles. Copper nanoparticles produced by arc discharge synthesis have many advantages, such as low cost and a high production rate. Conductive inks were prepared from copper nanoparticles to obtain thin copper films on glass substrates. As demonstrated by scanning electron microscopy analyses and electrical resistivity measurements, the copper film porosity and electrical resistivity cannot be significantly reduced by prolonged sintering time or increasing single film thickness. Instead, by applying the multilayer sintering method, where the coating and sintering process was repeated up to four times in this study, the porosity of copper films could be effectively reduced from 33.6% after one-layer sintering to 3.7% after four-layer sintering. Copper films with an electrical resistivity of 3.49 ± 0.35µΩ·cm (two times of the bulk copper) have been achieved after four-layer sintering, while one-layer sintered copper films were measured to possess resistivity of 11.17 ± 2.17µΩ·cm.

Effect of dual sintering with laser irradiation and thermal treatment on printed copper nanoparticle patterns.

The dual sintering of copper (Cu) nanoparticles (NPs) was introduced to produce conductive patterns suitable for flexible electronics applications. In this method, laser irradiation using a Nd:YAG laser with a wavelength of 1064 nm was performed at laser powers of 400, 600 and 800 mJ. The laser irradiation time was 15 and 30 s for each laser power. After laser irradiation, all of the Cu NP patterns were thermally sintered under formic acid vapors. The temperature and time for thermal treatment were selected as 260 °C and 15 min, respectively. The resultant physical, chemical, electrical and mechanical properties were evaluated and compared considering the six different dual sintering conditions. The Cu NP patterns sintered using 800 mJ for 30 s showed increased necking and coalescence compared to the other patterns and featured a microstructure with increased density. Despite being oxidized, the Cu NP patterns sintered with 800 mJ for 30 s showed the lowest electrical resistivity of 11.25µΩ cm. The surface of every sintered Cu pattern was oxidized, and mechanical hardness increased with increasing laser power. The Cu NP pattern sintered with 800 mJ for 30 s demonstrated the highest hardness of 48.64 N mm-2. After sintering using the six different conditions, the Cu NP patterns exhibited a weight loss of 0.02-3.87 wt%, and their roughness varied in the range of 26.15-74.08 nm. This can be attributed to the effective removal of organic residues and the degree of particle agglomeration. After performing folding tests up to 50 cycles, Cu NP patterns showed an upward trend in resistance with increasing laser power and time. The highest and lowest resistance ratios were observed as 3.97 and 17.24 for the patterns sintered at 400 mJ for 15 s and 800 mJ for 30 s, respectively.

Aging of Copper Nanoparticles in the Marine Environment Regulates Toxicity for a Coastal Phytoplankton Species.

Environmental conditions in aquatic ecosystems transform toxic chemicals over time, influencing their bioavailability and toxicity. Using an environmentally relevant methodology, we tested how exposure to seawater for 1-15 weeks influenced the accumulation and toxicity of copper nanoparticles (nano-Cu) in a marine phytoplankton species. Nano-Cu rapidly agglomerated in seawater and then decreased in size due to Cu dissolution. Dissolution rates declined during weeks 1-4 and remained low until 15 weeks, when the large agglomerates that had formed began to rapidly dissolve again. Marine phytoplankton species were exposed for 5-day periods to nano-Cu aged from 1 to 15 weeks at concentrations from 0.01 to 20 ppm. Toxicity to phytoplankton, measured as change in population growth rate, decreased significantly with particle aging from 0 to 4 weeks but increased substantially in the 15-week treatment due apparently to elevated Cu dissolution of reagglomerated particles. Results indicate that the transformation, fate, and toxicity of nano-Cu in marine ecosystems are influenced by a highly dynamic physicochemical aging process.

Study on the antibacterial effect of CuO nanoparticles on Klebsiella pneumonia bacteria: Efficient treatment for colorectal cancer.

Colorectal cancer (CRC) is a widespread type of cancer across the world. One efficient therapy approach is the use of antibiotic agents, but one of the main issues related to treating CRC is microbial resistance to antibiotics. As microbes are becoming more resistant to antibiotics and other traditional antimicrobial agents, nanobiotechnology has made it possible to employ nanomaterials with the aim of creating a new generation of antimicrobial agents. In the present study, we have assessed the antimicrobial potential of CuO nanoparticles (NPs) against gram-negative bacteria like Klebsiella pneumoniae carrying PKS genes responsible for encoding colibactin as the key factor for CRC development. For this purpose, the antibacterial effects of conventional antibacterial agents, including erythromycin, piperacillin, and ampicillin, as well as CuONPs, were compared on isolated strains from cancerous candidates. The obtained results revealed that isolates (K. pneumoniae) showed resistance toward the mentioned conventional antibiotics, but CuONPs showed efficient antibacterial properties against K. pneumonia with a MIC = 62 µg/mL. On the other hand, a synergistic antibacterial effect was obtained when CuONPs were used in combination with conventional antibiotics, which are ineffective when used alone. Therefore, CuONPs can be introduced as an excellent antimicrobial agent against K. pneumoniae bacteria in CRC, especially when they are combined with other antibiotics since they can activate the antimicrobial activity of the conventional antibiotics.

Copper nanoparticles lead to reproductive dysfunction by affecting key enzymes of ovarian hormone synthesis and metabolism in female rats.

Studies on the general toxicity of copper nanoparticles (Cu NPs) have been conducted extensively, but their effects on reproductive toxicity remain unclear. In this study, we evaluated the toxic effect of Cu NPs on pregnant rats and their litter. The comparative in vivo toxicity of Cu ions, Cu NPs, and Cu microparticles (MPs) was studied in a 17-day repeated oral-dose experiment at the doses of 60, 120, and 180 mg/kg/day in pregnant rats. The pregnancy rate, mean live litter size, and number of dams decreased when exposed to Cu NPs. Moreover, Cu NPs caused a dose-dependent increase in ovarian Cu levels. The metabolomics results showed that Cu NPs caused reproductive dysfunction by altering sex hormones. In addition, in vivo and in vitro experiments showed that the ovarian cytochrome P450 enzymes (CYP450), responsible for hormone production, were significantly upregulated, whereas the enzymes responsible for hormone metabolism were significantly inhibited, resulting in a metabolic imbalance in some ovarian hormones. Furthermore, the results revealed that the nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) and mitogen-activated protein kinase (MAPK) signaling pathways significantly participated in the regulation of ovarian CYP enzyme expression. Overall, the results of the in vivo and in vitro toxicity experiments with Cu ions, Cu NPs, and Cu MPs suggested that toxicity from nanoscale Cu particles poses a more serious reproductive threat than microscale Cu as Cu NPs could directly damage the ovary and affect the metabolism of ovarian hormones.

Green synthesis-assisted copper nanoparticles using Aegle marmelos leaves extract: physical, optical, and antimicrobial properties.

In the present report, Aegle marmelos leaf powder was used to synthesize copper nanoparticles (CuNPs) using a simple and cost-effective method. A. marmelos leaves have various medicinal uses including for the treatment of diarrhoea, constipation, diabetes, cholera, skin diseases, earache, blood purification, heart problems, and so on. The plant biomolecules induce the reduction of Cu2+ ions to CuNPs and also act as a capping and stabilizing agent. The formation of CuNPs was confirmed using photoluminescence (PL) excitation and emission spectra on a Shimadzu RF-5301 PC spectrofluorophotometer and the absorbance spectra of a UV-visible spectrophotometer at different stages during the synthesis process. In addition, other properties of synthesized CuNPs were also investigated using X-ray diffraction, Fourier transform infrared spectroscopy, and transmission electron microscopy techniques. The average size of the synthesized CuNPs was in the range 20-40 nm. Furthermore, the synthesized NPs were also considered for an antimicrobial study against Gram-positive Staphylococcus aureus and Proteus, and Gram-negative Escherichia coli and Salmonella spp. using the agar well diffusion method. The zone of inhibition against the Gram-positive bacteria was greater than the zone of inhibition against the Gram-negative bacteria. These investigation results suggest that synthesized NPs are promising nanomaterials for use as antimicrobial agents.

Copper nanoparticle-decorated nitrogen-doped carbon nanosheets for electrochemical determination of paraquat.

A new strategy to prepare copper (Cu) nanoparticles anchored in nitrogen-doped carbon nanosheets (Cu@CN) has been designed and the nanomaterial applied to the determination of paraquat (PQ). The nanocomposite materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and several other techniques. We found that the Cu nanoparticles are uniformly distributed on the carbon materials, providing abundant active sites for electrochemical detection. The electrochemical behavior of the Cu@CN-based PQ sensor was investigated by square-wave voltammetry (SWV). Cu@CN exhibited excellent electrochemical activity and PQ detection performance. The Cu@CN-modified glassy carbon electrode (Cu@CN/GCE) exhibited excellent stability, favorable sensitivity, and high selectivity under optimized conditions (enrichment voltage -0.1 V and enrichment time 400 s) of the SWV test. The detection range reached 0.50 nM to 12.00 µM, and the limit of detection was 0.43 nM with high sensitivity of 18 µA·µM-1·cm-2. The detection limit is 9 times better than that of the high-performance liquid chromatography method. The Cu@CN electrochemical sensor demonstrated excellent sensitivity and selectivity also in environmental water and fruit samples enabling its use in practical, rapid trace-level detection of PQ in environmental samples.

A highly sensitive colorimetric DNA sensor for MicroRNA-155 detection: leveraging the peroxidase-like activity of copper nanoparticles in a double amplification strategy.

A novel and highly sensitive colorimetric DNA sensor for determination of miRNA-155 at attomolar levelsis presented that combines the peroxidase-like activity of copper nanoparticles (CuNPs) with the hybridization chain reaction (HCR) . The utilization of CuNPs offers advantages such as strong interaction with double-stranded DNA, excellent molecular recognition, and mimic catalytic activity. Herein, a capture probe DNA (P1) was immobilized on carboxylated magnetic beads (MBs), allowing for amplified immobilization due to the 3D surface. Subsequently, the presence of the target microRNA-155 led to the formation of a sandwich structure (P2/microRNA-155/P1/MBs) when P2 was introduced to the modified P1/MBs. The HCR reaction was then triggered by adding H1 and H2 to create a super sandwich (H1/H2)n. Following this, Cu2+ ions were attracted to the negatively charged phosphate groups of the (H1/H2)n and reduced by ascorbic acid, resulting in the formation of CuNPs, which were embedded into the grooves of the (H1/H2)n. The peroxidase-like activity of CuNPs catalyzed the oxidation reaction of 3,3',5,5'-Tetramethylbenzidine (TMB), resulting in a distinct blue color measured at 630 nm. Under optimal conditions, the colorimetric biosensor exhibited a linear response to microRNA-155 concentrations ranging from 80 to 500 aM, with a detection limit of 22 aM, and discriminate against other microRNAs. It was also successfully applied to the determination of microRNA-155 levels in spiked human serum.

An Electrochemical Sensor for Sulfadiazine Determination Based on a Copper Nanoparticles/Molecularly Imprinted Overoxidized Polypyrrole Composite.

To protect consumers from risks related to overexposure to sulfadiazine, total residues of this antibacterial agent in animal-origin foodstuffs not exceed international regulations. To this end, a new electrochemical sensor based on a molecularly imprinted polymer nanocomposite using overoxidized polypyrrole and copper nanoparticles for the detection of sulfadiazine is elaborated. After optimization of the preparation of the electrochemical sensors, their differential pulse voltammetric signal exhibits an excellent stability and reproducibility at 1.05 V, with a large linear range between 10-9 and 10-5 mol L-1 and a low detection limit of 3.1 × 10-10 mol L-1. The produced sulfadiazine sensor was successfully tested in real milk samples. The combination of the properties of the electrical conduction of copper nanoparticles with the properties of the preconcentration of the molecularly imprinted overoxidized polypyrrole allows for the highly sensitive detection of sulfadiazine, even in real milk samples. This strategy is new and leads to the lowest detection limit yet achieved, compared to those of the previously published sulfadiazine electrochemical sensors.