1DE-MS Profiling for Proteoform-Correlated Proteomic Analysis, by Combining SDS-PAGE, Whole-Gel Slicing, Quantitative LC-MS/MS, and Reconstruction of Gel Distributions of Several Thousands of Proteins.

SDS-PAGE has often been used in proteomic analysis, but generally for sample prefractionation although the technique separates proteins by molecular masses (Mws) and the information would contribute to proteoform-level analysis. Here, we report a method that combines SDS-PAGE, whole-gel slicing, and quantitative LC-MS/MS for establishing gel distributions of several thousand proteins in a proteome. A previously obtained data set on rat cerebral cortex with cerebral ischemia-reperfusion injury1 was analyzed, and the gel distributions of 5906 proteins were reconstructed. These distributions, referred to as 1DE-MS profiles, revealed that about 30% of the proteins had more than one proteoform detected in the gels. The profiles were categorized into six types by distribution (narrow, dispersed, or broad) and relative deviations between the abundance-peak apparent Mws and calculated Mws. Only 56% of the proteins showed narrow distributions and matched Mws, while the others had rather complex profiles. Bioinformatic analysis on example profiles showed the resolved proteoforms involved alternative splicing, proteolytic processing, glycosylation and ubiquitination, fragmentation, and probably transmembrane structures. Profile-based differential analysis revealed that many of the disease-caused changes were proteoform dependent. This work provided a proteome-scale view of protein distributions in SDS-PAGE gels, and the method would be useful to obtain proteoform-correlated information for in-depth proteomics.

The comparison between 2DE-MS and bottom-up LC-MS demands high-end techniques for both technologies.

In contrast to bottom-up LC-MS only 2DE-MS can separate and detect a huge number of human protein species. Kwiatkowski et al. (in this issue) established parameters to estimate the amount of protein speciation for each human protein. Proteins identified in 2DE-MS approaches showed more protein speciation than in bottom-up LC-MS. The authors state that protein speciation is likely to increase the chance of proteins to be determined in 2-DE/MS, though admitting that low-sensitivity 2DE-MS methods were used in this study. In agreement with Kwiatkowski et al., we are convinced that the difference between 2DE-MS and bottom-up LC-MS will disappear, if high-resolution 2DE is combined with identification by a high-sensitivity LC-Orbitrap-MS. Meta-analysis of proteomic data is surely a promising tool, though the technological progress in 2DE and MS has to reach a plateau to enable useful comparisons.

Genome-wide sRNA and mRNA transcriptomic profiling insights into dynamic regulation of taproot thickening in radish (Raphanus sativus L.).

BACKGROUND: Taproot is the main edible organ and ultimately determines radish yield and quality. However, the precise molecular mechanism underlying taproot thickening awaits further investigation in radish. Here, RNA-seq was performed to identify critical genes involved in radish taproot thickening from three advanced inbred lines with different root size. RESULTS: A total of 2606 differentially expressed genes (DEGs) were shared between 'NAU-DY' (large acicular) and 'NAU-YB' (medium obovate), which were significantly enriched in 'phenylpropanoid biosynthesis', 'glucosinolate biosynthesis', and 'starch and sucrose metabolism' pathway. Meanwhile, a total of 16 differentially expressed miRNAs (DEMs) were shared between 'NAU-DY' and 'NAU-YH' (small circular), whereas 12 miRNAs exhibited specific differential expression in 'NAU-DY'. Association analysis indicated that miR393a-bHLH77, miR167c-ARF8, and miR5658-APL might be key factors to biological phenomenon of taproot type variation, and a putative regulatory model of taproot thickening and development was proposed. Furthermore, several critical genes including SUS1, EXPB3, and CDC5 were characterized and profiled by RT-qPCR analysis. CONCLUSION: This integrated study on the transcriptional and post-transcriptional profiles could provide new insights into comprehensive understanding of the molecular regulatory mechanism underlying taproot thickening in root vegetable crops.

Online Monitoring of Electrochemical Carbon Corrosion in Alkaline Electrolytes by Differential Electrochemical Mass Spectrometry.

Carbon corrosion at high anodic potentials is a major source of instability, especially in acidic electrolytes and impairs the long-term functionality of electrodes. In-depth investigation of carbon corrosion in alkaline environment by means of differential electrochemical mass spectrometry (DEMS) is prevented by the conversion of CO2 into CO3 2- . We report the adaptation of a DEMS system for online CO2 detection as the product of carbon corrosion in alkaline electrolytes. A new cell design allows for in situ acidification of the electrolyte to release initially dissolved CO3 2- as CO2 in front of the DEMS membrane and its subsequent detection by mass spectrometry. DEMS studies of a carbon-supported nickel boride (Nix B/C) catalyst and Vulcan XC 72 at high anodic potentials suggest protection of carbon in the presence of highly active oxygen evolution electrocatalysts. Most importantly, carbon corrosion is decreased in alkaline solution.

Zirconium Oxycarbide: A Highly Stable Catalyst Material for Electrochemical Energy Conversion.

Metal carbides and oxycarbides have recently gained considerable interest due to their (electro)catalytic properties that differ from those of transition metals and that have potential to outperform them as well. The stability of zirconium oxycarbide nanopowders (ZrO0.31 C0.69 ), synthesized via a hybrid solid-liquid route, is investigated in different gas atmospheres from room temperature to 800 °C by using in-situ X-ray diffraction and in-situ electrical impedance spectroscopy. To feature the properties of a structurally stable Zr oxycarbide with high oxygen content, a stoichiometry of ZrO0.31 C0.69 has been selected. ZrO0.31 C0.69 is stable in reducing gases with only minor amounts of tetragonal ZrO2 being formed at high temperatures, whereas it decomposes in CO2 and O2 gas atmosphere. From online differential electrochemical mass spectrometry measurements, the hydrogen evolution reaction (HER) onset potential is determined at -0.4 VRHE . CO2 formation is detected at potentials as positive as 1.9 VRHE as ZrO0.31 C0.69 decomposition product, and oxygen is anodically formed at 2.5 VRHE , which shows the high electrochemical stability of this material in acidic electrolyte. This peopwery makes the material suited for electrocatalytic reactions at anodic potentials, such as CO and alcohol oxidation reactions, in general.

UAVs for Structure-From-Motion Coastal Monitoring: A Case Study to Assess the Evolution of Embryo Dunes over a Two-Year Time Frame in the Po River Delta, Italy.

Coastal environments are usually characterized by a brittle balance, especially in terms of sediment transportation. The formation of dunes, as well as their sudden destruction as a result of violent storms, affects this balance in a significant way. Moreover, the growth of vegetation on the top of the dunes strongly influences the consequent growth of the dunes themselves. This work presents the results obtained through a long-term monitoring of a complex dune system by the use of Unmanned Aerial Vehicles (UAVs). Six different surveys were carried out between November 2015 and December 2017 in the littoral of Rosolina Mare (Italy). Aerial photogrammetric data were acquired during flight repetitions by using a DJI Phantom 3 Professional with the camera in a nadiral arrangement. The processing of the captured images consisted of the reconstruction of a three-dimensional model using the Structure-from-Motion (SfM). Each model was framed in the European Terrestrial Reference System (ETRS) using GNSS geodetic receivers in Network Real Time Kinematic (NRTK). Specific data management was necessary due to the vegetation by filtering the dense cloud. This task was performed by both performing a slope detection and a removal of the residual outliers. The final products of this approach were thus represented by Digital Elevation Models (DEMs) of the sandy coastal section. In addition, DEMs of Difference (DoD) were also computed for the purpose of monitoring over time and detecting variations. The accuracy assessment of the DEMs was carried out by an elevation comparison through especially GNSS-surveyed points. Relevant cross sections were also extracted and compared. The use of the Structure-from-Motion approach by UAVs finally proved to be both reliable and time-saving thanks to quicker in situ operations for the data acquisition and an accurate reconstruction of high-resolution elevation models. The low cost of the system and its flexibility represent additional strengths, making this technique highly competitive with traditional ones.

Comparative proteomics of oxidative stress response of Lactobacillus acidophilus NCFM reveals effects on DNA repair and cysteine de novo synthesis.

Probiotic cultures encounter oxidative conditions during manufacturing, yet protein abundance changes induced by such stress have not been characterized for some of the most common probiotics and starters. This comparative proteomics investigation focuses on the response by Lactobacillus acidophilus NCFM to H2 O2, simulating an oxidative environment. Bacterial growth was monitored by BioScreen and batch cultures were harvested at exponential phase for protein profiling of stress responses by 2D gel based comparative proteomics. Proteins identified in 19 of 21 spots changing in abundance due to H2 O2 were typically related to carbohydrate and energy metabolism, cysteine biosynthesis, and stress. In particular, increased cysteine synthase activity may accumulate a cysteine pool relevant for protein stability, enzyme catalysis, and the disulfide-reducing pathway. The stress response further included elevated abundance of biomolecules reducing damage such as enzymes from DNA repair pathways and metabolic enzymes with active site cysteine residues. By contrast, a protein-refolding chaperone showed reduced abundance, possibly reflecting severe oxidative protein destruction that was not overcome by refolding. The proteome analysis provides novel insight into resistance mechanisms in lactic acid bacteria against reactive oxygen species and constitutes a valuable starting point for improving industrial processes, food design, or strain engineering preserving microorganism viability.

Two-Dimensional Gel Electrophoresis: A Reference Protocol.

Two-dimensional gel electrophoresis (2DE) has been a mainstay of proteomic techniques for more than four decades. It was even in use for several years before the term proteomics was actually coined in the early 1990s. Over this time, it has been used in the study of many diseases including cancer, diabetes, heart disease, and psychiatric disorders through the proteomic analysis of body fluids and tissues. This chapter presents a general protocol which can be applied in the study of biological samples such as blood serum or plasma and multiple tissues including the brain.

Influence of Alternative Exposure Estimates in the Diesel Exhaust Miners Study: Diesel Exhaust and Lung Cancer.

The landmark Diesel Exhaust in Miners Study (DEMS) studied the relationship between diesel exhaust exposure (DEE) and lung cancer mortality of workers at eight nonmetal mines who were followed from beginning of dieselization of the mines (1947-1967) through December 31, 1997. The original analyses quantified DEE exposures using exposure to respirable elemental carbon (REC) to represent DEE, and CO as a surrogate for REC. However, this use of CO data, and the CO data themselves, have numerous shortcomings. We developed new estimates of REC exposures using historical data on use of diesel equipment, diesel engine horsepower (HP), mine ventilation rates, and the documented reduction in particulate matter emissions per HP in diesel engines from 1975 through 1995. These new REC estimates were applied in a conditional logistic regression of the DEMS nested case-control data very similar to the one applied in the original DEMS analyses. None of the trend slopes calculated using the new REC estimates were statistically significant (p > 0.05). Moreover, these trend slopes were smaller by roughly factors of five without control for radon exposure and factors of 12 with control for radon exposure compared to those estimated in the original DEMS analyses. Also, the 95% confidence intervals for these trend slopes had only minimal overlap with those for the slopes in the original DEMS analyses. These results underscore the uncertainty in estimates of the potency of diesel exhaust in causing lung cancer based on analysis of the DEMS data due to uncertainty in estimates of exposures to diesel exhaust.

Assessment of a numerical model to reproduce event-scale erosion and deposition distributions in a braided river.

Numerical morphological modeling of braided rivers, using a physics-based approach, is increasingly used as a technique to explore controls on river pattern and, from an applied perspective, to simulate the impact of channel modifications. This paper assesses a depth-averaged nonuniform sediment model (Delft3D) to predict the morphodynamics of a 2.5 km long reach of the braided Rees River, New Zealand, during a single high-flow event. Evaluation of model performance primarily focused upon using high-resolution Digital Elevation Models (DEMs) of Difference, derived from a fusion of terrestrial laser scanning and optical empirical bathymetric mapping, to compare observed and predicted patterns of erosion and deposition and reach-scale sediment budgets. For the calibrated model, this was supplemented with planform metrics (e.g., braiding intensity). Extensive sensitivity analysis of model functions and parameters was executed, including consideration of numerical scheme for bed load component calculations, hydraulics, bed composition, bed load transport and bed slope effects, bank erosion, and frequency of calculations. Total predicted volumes of erosion and deposition corresponded well to those observed. The difference between predicted and observed volumes of erosion was less than the factor of two that characterizes the accuracy of the Gaeuman et al. bed load transport formula. Grain size distributions were best represented using two φ intervals. For unsteady flows, results were sensitive to the morphological time scale factor. The approach of comparing observed and predicted morphological sediment budgets shows the value of using natural experiment data sets for model testing. Sensitivity results are transferable to guide Delft3D applications to other rivers.

Spectroelectrochemical Study of Carbon Monoxide and Ethanol Oxidation on Pt/C, PtSn(3:1)/C and PtSn(1:1)/C Catalysts.

PtSn-based catalysts are one of the most active materials toward that contribute ethanol oxidation reaction (EOR). In order to gain a better understanding of the Sn influence on the carbon monoxide (principal catalyst poison) and ethanol oxidation reactions in acidic media, a systematic spectroelectrochemical study was carried out. With this end, carbon-supported PtSnx (x = 0, 1/3 and 1) materials were synthesized and employed as anodic catalysts for both reactions. In situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry (DEMS) indicate that Sn diminishes the amount of bridge bonded CO (COB) and greatly improves the CO tolerance of Pt-based catalysts. Regarding the effect of Sn loading on the EOR, it enhances the catalytic activity and decreases the onset potential. FTIRS and DEMS analysis indicate that the C-C bond scission occurs at low overpotentials and at the same potential values regardless of the Sn loading, although the amount of C-C bond breaking decreases with the rise of Sn in the catalytic material. Therefore, the elevated catalytic activity toward the EOR at PtSn-based electrodes is mainly associated with the improved CO tolerance and the incomplete oxidation of ethanol to form acetic acid and acetaldehyde species, causing the formation of a higher amount of both C2 products with the rise of Sn loading.

Analysis of Key Genes and miRNA-mRNA Networks Associated with Glucocorticoids Treatment in Chronic Obstructive Pulmonary Disease.

Background: Some patients with chronic obstructive pulmonary disease (COPD) benefit from glucocorticoid (GC) treatment, but its mechanism is unclear. Objective: With the help of the Gene Expression Omnibus (GEO) database, the key genes and miRNA-mRNA related to the treatment of COPD by GCs were discussed, and the potential mechanism was explained. Methods: The miRNA microarray dataset (GSE76774) and mRNA microarray dataset (GSE36221) were downloaded, and differential expression analysis were performed. Gene Ontology (GO) function and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analyses were performed on the differentially expressed genes (DEGs). The protein interaction network of the DEGs in the regulatory network was constructed with the STRING database, and the key genes were screened through Cytoscape. Potential downstream target genes regulated by differentially expressed miRNAs (DEMs) were predicted by the miRWalk3.0 database, and miRNA-mRNA regulatory networks were constructed. Finally, some research results were validated. Results: ① Four DEMs and 83 DEGs were screened; ② GO and KEGG enrichment analysis mainly focused on the PI3K/Akt signalling pathway, ECM receptor interaction, etc.; ③ CD2, SLAMF7, etc. may be the key targets of GC in the treatment of COPD; ④ 18 intersection genes were predicted by the mirwalk 3.0 database, and 9 pairs of miRNA-mRNA regulatory networks were identified; ⑤ The expression of miR-320d-2 and TFCP2L1 were upregulated by dexamethasone in the COPD cell model, while the expression of miR-181a-2-3p and SLAMF7 were downregulated. Conclusion: In COPD, GC may mediate the expression of the PI3K/Akt signalling pathway through miR-181a-2-3p, miR-320d-2, miR-650, and miR-155-5p, targeting its downstream signal factors. The research results provide new ideas for RNA therapy strategies of COPD, and also lay a foundation for further research.

Insights in Pt-based electrocatalysts on carbon supports for electro-oxidation of carbohydrates: an EIS-DEMS analysis.

In this work, the electrochemical oxidation of carbohydrates (glucose, fructose, and sucrose) was induced at the interface of Pt-nanoparticles supported on different carbon-based materials as carbon vulcan (C) and carbon black (CB). It was found that the support plays an important role during carbohydrates electro-oxidation as demonstrated by electrochemical techniques. In this context, current-concentration profiles of the redox peaks show the behavior of the pathways at carbohydrates-based solutions. Herein, the trend of current measured was glucose > sucrose > fructose, attributed to differences in the organic functional groups and chain-structure. Raman, XRD, SEM-EDS and XPS put in clear important structural, morphological, and electronic differences linked with the intrinsic nature of the obtained material. Differential Electrochemical Mass Spectroscopy (DEMS) indicated that the selectivity and the conversion of the formed reaction products during oxidation is linked with the catalyst nature (distribution, particle size) and the interaction with the carbon-based support.

Enhancing Pseudomonas syringae pv. Actinidiae sensitivity in kiwifruit by repressing the NBS-LRR genes through miRNA-215-3p and miRNA-29-3p identification.

Kiwifruit bacterial canker, caused by Pseudomonas syringae pv. actinidiae (PSA), poses a grave threat to the global kiwifruit industry. In this study, we examined the role of microRNAs (miRNAs) in kiwifruit's response to PSA. Kiwifruit seedlings subjected to PSA treatment showed significant changes in both miRNA and gene expression compared to the control group. We identified 364 differentially expressed miRNAs (DEMs) and 7170 differentially expressed genes (DEGs). Further analysis revealed 180 miRNAs negatively regulating 641 mRNAs. Notably, two miRNAs from the miRNA482 family, miRNA-215-3p and miRNA-29-3p, were found to increase kiwifruit's sensitivity to PSA when overexpressed. These miRNAs were linked to the regulation of NBS-LRR target genes, shedding light on their role in kiwifruit's defence against PSA. This study offers insights into the miRNA482-NBS-LRR network as a crucial component in enhancing kiwifruit bioresistance to PSA infestation and provides promising candidate genes for further research.

Identification of Driver Genes and miRNAs in Ovarian Cancer through an Integrated In-Silico Approach.

Ovarian cancer is the eighth-most common cancer in women and has the highest rate of death among all gynecological malignancies in the Western world. Increasing evidence shows that miRNAs are connected to the progression of ovarian cancer. In the current study, we focus on the identification of miRNA and its associated genes that are responsible for the early prognosis of patients with ovarian cancer. The microarray dataset GSE119055 used in this study was retrieved via the publicly available GEO database by NCBI for the analysis of DEGs. The miRNA GSE119055 dataset includes six ovarian carcinoma samples along with three healthy/primary samples. In our study, DEM analysis of ovarian carcinoma and healthy subjects was performed using R Software to transform and normalize all transcriptomic data along with packages from Bioconductor. Results: We identified miRNA and its associated hub genes from the samples of ovarian cancer. We discovered the top five upregulated miRNAs (hsa-miR-130b-3p, hsa-miR-18a-5p, hsa-miR-182-5p, hsa-miR-187-3p, and hsa-miR-378a-3p) and the top five downregulated miRNAs (hsa-miR-501-3p, hsa-miR-4324, hsa-miR-500a-3p, hsa-miR-1271-5p, and hsa-miR-660-5p) from the network and their associated genes, which include seven common genes (SCN2A, BCL2, MAF, ZNF532, CADM1, ELAVL2, and ESRRG) that were considered hub genes for the downregulated network. Similarly, for upregulated miRNAs we found two hub genes (PRKACB and TAOK1).

Bioinformatic Analysis Divulged Novel Prognostic Circulating MicroRNAs and Their Potential Target Genes in Breast Cancer.

Breast cancer (BC) is both an inherited and environmental-based disease which is the leading cause of death among women. Early detection of BC can prevent invasion and metastasis in patients. Currently, researchers endeavor to find non-invasive biological markers from body fluids. Circulating non-coding RNAs such as microRNAs (miRNAs) can potentially be valuable prognostic and detective biomarkers. To identify novel miRNA-based biomarkers, we utilized bioinformatic tools. To reach this goal, the miRNA expression profiles of GSE31309, GSE 44,281, GSE98181, and GSE118782 were analyzed through a limma package of R. Target gene prediction of differentially expressed miRNAs, called differentially expressed miRNAs (DEMs), between samples of healthy individuals and BC patients was implemented through Multimir package of R. Functional enrichment analysis of predicted target genes through Enrich R (online database) revealed that most of the genes are enriched in the mitochondrial outer membrane for cellular component, intrinsic apoptotic signaling regulations for biological processes, transcription co-receptor activity for molecular functions, and dopaminergic synapse pathway. Furthermore, our survival analysis results revealed that miR-29c and mir-361 have the potential to serve as prognostic biomarkers.

Cells at early and late stages of infection with Senecavirus A: Comparative analysis of N6-methyladenosine modification on mRNAs.

Infection with Senecavirus A (SVA) causes differential phenotypes in cells. In this study, cells were inoculated with SVA for culture. At 12 and 72 h post infection, cells were independently harvested for high-throughput RNA sequencing, and further methylated RNA immunoprecipitation sequencing. The resultant data were comprehensively analyzed for mapping N6-methyladenosine (m6A)-modified profiles of SVA-infected cells. More importantly, m6A-modified regions were identified in the SVA genome. A dataset of m6A-modified mRNAs was generated for screening out differentially m6A-modified mRNAs, further subjected to a series of in-depth analyses. This study not only showed statistical differentiation of m6A-modified sites between two SVA-infected groups, but also demonstrated that SVA genome, as a positive-sense, single-stranded mRNA, itself could be modified through the m6A pattern. Out of the six samples of SVA mRNAs, only three were identified to be m6A-modified, implying that the epigenetic effect might not be a crucial driving force for SVA evolution.

Distortion-Induced Interfacial Charge Transfer at Single Cobalt Atom Secured on Ordered Intermetallic Surface Enhances Pure Oxygen Production.

In this work, atomic cobalt (Co) incorporation into the Pd2Ge intermetallic lattice facilitates operando generation of a thin layer of CoO over Co-substituted Pd2Ge, with Co in the CoO surface layer functioning as single metal sites. Hence the catalyst has been titled Co1-CoO-Pd2Ge. High-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy confirm the existence of CoO, with some of the Co bonded to Ge by substitution of Pd sites in the Pd2Ge lattice. The role of the CoO layer in the oxygen evolution reaction (OER) has been verified by its selective removal using argon sputtering and conducting the OER on the etched catalyst. In situ X-ray absorption near-edge structure and extended X-ray absorption fine structure spectroscopy demonstrate that CoO gets transformed to CoOOH (Co3+) in operando condition with faster charge transfer through Pd atoms in the core Pd2Ge lattice. In situ Raman spectroscopy depicts the emergence of a CoOOH phase on applying potential and shows that the phase is stable with increasing potential and time without getting converted to CoO2. Density functional theory calculations indicate that the Pd2Ge lattice induces distortion in the CoO phase and generates unpaired spins in a nonmagnetic CoOOH system resulting in an increase in the OER activity and durability. The existence of spin density even after electrocatalysis is verified from electron paramagnetic resonance spectroscopy. We have thus successfully synthesized intermetallic supported CoO during synthesis and rigorously verified the role played by an intermetallic Pd2Ge core in enhancing charge transfer, generating spin density, improving electrochemical durability, and imparting mechanical stability to a thin CoOOH overlayer. Differential electrochemical mass spectrometry has been explored to visualize the instantaneous generation of oxygen gas during the onset of the reaction.

miRNA-mRNA analysis of sheep adrenal glands reveals the network regulating reproduction.

BACKGROUND: The adrenal gland participates in the process of sheep reproduction. MicroRNAs (miRNAs), endogenous small noncoding RNAs, regulate gene expression at the posttranscriptional level. However, the miRNA-mRNA network profile of adrenal glands relating to reproduction in sheep is still not well-studied. As sheep with FecBBB genotype show higher lambing number compare with the sheep with FecB++ genotype. This research aims to compare gene expression by small RNA-seq in adrenal tissues at follicular (F) and luteal (L) phases in FecBBB (MM) and FecB++ (ww) sheep. After analysis of gene expression, significant differentially expressed microRNAs (DEMs) and corresponding target genes were identified. RESULTS: A total of 180 miRNAs were found in this study, of which 19 DEMs were expressed in the four comparison groups (MM_F_A vs. MM_L_A, MM_F_A vs. ww_F_A, MM_L_A vs. ww_L_A, ww_F_A vs. ww_L_A). Subsequently, 354 target genes of 19 DEMs were predicted by integrated analysis. Cluster analysis was performed by K_means_cluster, and the expression patterns of these DEMs were separated into four subclusters. Functional analysis of target genes was performed by Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG). The results indicated that the target genes were involved mainly in the Notch signaling pathway, signal transduction, cell communication, innate immune response and amino acid metabolism. Specifically, the Notch signaling pathway, biosynthetic process and metabolic process of pyrimidine nucleotide and amino acid metabolism appear to play key regulatory roles in the sheep fertility trait. Furthermore, miRNA-mRNA interaction networks were constructed by differentially expressed genes combined with our previous study of transcriptome data. The results showed that several key genes, including TDRD3, ANAPC7, CCNL2, BRD2 and MUT, were related to the transformation from the follicular phase to the luteal phase. PLAC8L1, NFAT5, DDX24 and MBD1 were related to the high fecundity of small tail Han sheep. CONCLUSIONS: In this study, the miRNA transcriptome profile was identified, and miRNA-mRNA interaction networks were constructed in adrenal gland tissue of small tail Han sheep, the interaction between miR-370-3p and its targets were considered to play a major role in the reproduction regulation process. The results enriched the number of known miRNAs in adrenal glands and provided novel ideas and further information to demonstrate posttranscriptional regulation mechanisms at follicular and luteal phases in different genotypes of small tail Han sheep.

Enhanced Electrochemical Capacity of Spherical Co-Free Li1.2 Mn0.6 Ni0.2 O2 Particles after a Water and Acid Treatment and its Influence on the Initial Gas Evolution Behavior.

Li-rich layered oxides (LRLO) with specific energies beyond 900 Wh kg-1 are one promising class of high-energy cathode materials. Their high Mn-content allows reducing both costs and the environmental footprint. In this work, Co-free Li1.2 Mn0.6 Ni0.2 O2 was investigated. A simple water and acid treatment step followed by a thermal treatment was applied to the LRLO to reduce surface impurities and to establish an artificial cathode electrolyte interface. Samples treated at 300 °C show an improved cycling behavior with specific first cycle capacities of up to 272 mAh g-1 , whereas powders treated at 900 °C were electrochemically deactivated due to major structural changes of the active compounds. Surface sensitive analytical methods were used to characterize the structural and chemical changes compared to the bulk material. Online DEMS measurements were conducted to get a deeper understanding of the effect of the treatment strategy on O2 and CO2 evolution during electrochemical cycling.