RESUMO
Lithium-ion and post-lithium-ion batteries are important components for building sustainable energy systems. They usually consist of a cathode, an anode, an electrolyte, and a separator. Recently, the use of solid-state materials as electrolytes has received extensive attention. The solid-state electrolyte materials (as well as the electrode materials) have traditionally been overwhelmingly crystalline materials, but amorphous (disordered) materials are gradually emerging as important alternatives because they can increase the number of ion storage sites and diffusion channels, enhance solid-state ion diffusion, tolerate more severe volume changes, and improve reaction activity. To develop superior amorphous battery materials, researchers have conducted a variety of experiments and theoretical simulations. This review highlights the recent advances in using amorphous materials (AMs) for fabricating lithium-ion and post-lithium-ion batteries, focusing on the correlation between material structure and properties (e.g., electrochemical, mechanical, chemical, and thermal ones). We review both the conventional and the emerging characterization methods for analyzing AMs and present the roles of disorder in influencing the performances of various batteries such as those based on lithium, sodium, potassium, and zinc. Finally, we describe the challenges and perspectives for commercializing rechargeable AMs-based batteries.
RESUMO
Organometallic η6-arene ruthenium(II) complexes with 3-chloro-6-(1H-pyrazol-1-yl)pyridazine (Ru1, Ru2, and Ru5) and 3-chloro-6-(3,5-dimethyl-1H-pyrazol-1-yl)pyridazine (Ru3-4) N,N' heterocyclic and η6-arene (cymene (Ru1-4) or toluene (Ru 5)) have been synthesized. The ruthenium(II) complexes have common "three-legged piano-stool" pseudo-octahedral structures known for half-sandwich complexes. Evolution of their UV-Visible absorption spectra in PBS buffer or DMSO over 24 h confirmed their good solvolysis stability. Titrations of the complexes with the calf thymus DNA (CT-DNA) were monitored using UV-Visible absorption and fluorescence spectroscopies. The complexes interact moderately with CT-DNA and their binding constants are in the order of 104 M-1. Competitive binding of the complexes to a DNA-Hoechst 33,258 depicted competitive displacement of Hoechst from DNA's minor grooves. These complexes bind to glutathione forming GSH-adducts through S coordination by replacement of a halide, with the iodo-analogues having higher binding constants than the chloro-complexes. Cyclic voltammograms of the complexes exhibited one electron-transfer quasi-reversible process. Trends in the molecular docking data of Ru1-5/DNA were similar to those for DNA binding constants. Of the five, only Ru1, Ru3 and Ru5 showed some activity (moderate) against the MCF-7 breast cancer cells with IC50 values in the range of 59.2-39.9 for which Ru5 was the most active. However, the more difficult-to-treat cell line, MDA-MB 231 cell was recalcitrant to the treatment by these complexes.
Assuntos
Antineoplásicos , Complexos de Coordenação , DNA , Glutationa , Rutênio , DNA/química , DNA/metabolismo , Humanos , Rutênio/química , Ligantes , Complexos de Coordenação/química , Complexos de Coordenação/farmacologia , Complexos de Coordenação/síntese química , Antineoplásicos/farmacologia , Antineoplásicos/química , Antineoplásicos/síntese química , Glutationa/química , Glutationa/metabolismo , Bovinos , Pirazóis/química , Pirazóis/farmacologia , Pirazóis/síntese química , Animais , Estrutura Molecular , Ensaios de Seleção de Medicamentos Antitumorais , Proliferação de Células/efeitos dos fármacos , Células MCF-7 , Linhagem Celular TumoralRESUMO
Here, we introduce an organic/inorganic composite hydrogel as a versatile gel electrode material. This composite hydrogel was formed by simply mixing an aqueous solution of flat microparticles of tungsten oxide, exhibiting superior water dispersibility, with a hydrogel composed of a water-soluble polyaramide-based polymer hydrogelator. The resulting composite hydrogel exhibited uniform dispersion of tungsten oxide flat particles throughout the hydrogel matrix, supplementing the structure formed by the polymer hydrogelator. It maintained the gel-forming capability and thixotropic behavior inherent to the polymer hydrogelator while showcasing the electrochemical characteristics of tungsten oxide. With its spreadability and applicability to various electrode shapes, a composite hydrogel is presented as a potential spreadable gel electrode material.
RESUMO
Structural and electrochemical properties of bismuth ferrite nanostructures produced by pulsed laser deposition with various morphologies are reported. The nanostructures are also explored as electrode materials for high-performance supercapacitors. Scanning electron microscopy images revealed that various bismuth ferrite morphologies were produced by varying the background pressure (10-6, 0.01, 0.10, 0.25, 0.50, 1.0, 2.0 and 4.0 Torr) in the deposition chamber and submitting them to a thermal treatment after deposition at 500â¦C. The as-deposited bismuth ferrite nanostructures range from very compact thin-film (10-6, 0.01, 0.10 Torr), to clustered nanoparticles (0.25, 0.50, 1.0 Torr), to very dispersed arrangement of nanoparticles (2.0 and 4.0 Torr). The electrochemical characteristic of the electrodes was investigated through cyclic voltammetry process. The increase in the specific surface area of the nanostructures as background pressure in the chamber increases does not lead to an increase in interfacial capacitance. This is likely due to the wakening of electrical contact between nanoparticles with increasing porosity of the nanostructures. The thermal treatment increased the contact between nanoparticles, which caused an increase in the interfacial capacitance of the nanostructure deposited under high background pressure in the chamber.
RESUMO
Hydrogel flexible strain sensors, renowned for their high stretchability, flexibility, and wearable comfort, have been employed in various applications in the field of human motion monitoring. However, the predominant method for fabricating hydrogels is the template method, which is particularly inefficient and costly for hydrogels with complex structural requirements, thereby limiting the development of flexible hydrogel electronic devices. Herein, we propose a novel method that involves using microgels to modify a hydrogel solution, printing the hydrogel ink using an electrohydrodynamic printing device, and subsequently forming the hydrogel under UV illumination. The resulting hydrogel exhibited a high tensile ratio (639.73%), high tensile strength (0.4243 MPa), and an ionic conductivity of 0.2256 S/m, along with excellent electrochemical properties. Moreover, its high linearity and sensitivity enabled the monitoring of a wide range of subtle changes in human movement. This novel approach offers a promising pathway for the development of high-performance, complexly structured hydrogel flexible sensors.
RESUMO
Supercapacitors (SCs) are a novel type of energy storage device that exhibit features such as a short charging time, a long service life, excellent temperature characteristics, energy saving, and environmental protection. The capacitance of SCs depends on the electrode materials. Currently, carbon-based materials, transition metal oxides/hydroxides, and conductive polymers are widely used as electrode materials. However, the low specific capacitance of carbon-based materials, high cost of transition metal oxides/hydroxides, and poor cycling performance of conductive polymers as electrodes limit their applications. Copper-sulfur compounds used as electrode materials exhibit excellent electrical conductivity, a wide voltage range, high specific capacitance, diverse structures, and abundant copper reserves, and have been widely studied in catalysis, sensors, supercapacitors, solar cells, and other fields. This review summarizes the application of copper-sulfur compounds in SCs, details the research directions and development strategies of copper-sulfur compounds in SCs, and analyses and summarizes the research hotspots and outlook, so as to provide a reference and guidance for the use of copper-sulfur compounds.
RESUMO
Lithium (Li) metal is one of the most promising anode materials for next-generation, high-energy, Li-based batteries due to its exceptionally high specific capacity and low reduction potential. Nonetheless, intrinsic challenges such as detrimental interfacial reactions, significant volume expansion, and dendritic growth present considerable obstacles to its practical application. This review comprehensively summarizes various recent strategies for the modification and protection of metallic lithium anodes, offering insight into the latest advancements in electrode enhancement, electrolyte innovation, and interfacial design, as well as theoretical simulations related to the above. One notable trend is the optimization of electrolytes to suppress dendrite formation and enhance the stability of the electrode-electrolyte interface. This has been achieved through the development of new electrolytes with higher ionic conductivity and better compatibility with Li metal. Furthermore, significant progress has been made in the design and synthesis of novel Li metal composite anodes. These composite anodes, incorporating various additives such as polymers, ceramic particles, and carbon nanotubes, exhibit improved cycling stability and safety compared to pure Li metal. Research has used simulation computing, machine learning, and other methods to achieve electrochemical mechanics modeling and multi-field simulation in order to analyze and predict non-uniform lithium deposition processes and control factors. In-depth investigations into the electrochemical reactions, interfacial chemistry, and physical properties of these electrodes have provided valuable insights into their design and optimization. It systematically encapsulates the state-of-the-art developments in anode protection and delineates prospective trajectories for the technology's industrial evolution. This review aims to provide a detailed overview of the latest strategies for enhancing metallic lithium anodes in lithium-ion batteries, addressing the primary challenges and suggesting future directions for industrial advancement.
RESUMO
CuO is recognized as a promising anode material for sodium-ion batteries because of its impressive theoretical capacity of 674 mAh g-1, derived from its multiple electron transfer capabilities. However, its practical application is hindered by slow reaction kinetics and rapid capacity loss caused by side reactions during discharge/charge cycles. In this work, we introduce an innovative approach to fabricating large-area CuO and CuO@Al2O3 flakes through a combination of magnetron sputtering, thermal oxidation, and atomic layer deposition techniques. The resultant 2D CuO flakes demonstrate excellent electrochemical properties with a high initial reversible specific capacity of 487 mAh g-1 and good cycling stability, which are attributable to their unique architectures and superior structural durability. Furthermore, when these CuO flakes are coated with an ultrathin Al2O3 layer, the integration of the 2D structures with outer nanocoating leads to significantly enhanced electrochemical properties. Notably, even after 70 rate testing cycles, the CuO@Al2O3 materials maintain a high capacity of 525 mAh g-1 at a current density of 50 mA g-1. Remarkably, at a higher current density of 2000 mA g-1, these materials still achieve a capacity of 220 mAh g-1. Moreover, after 200 cycles at a current density of 200 mA g-1, a high charge capacity of 319 mAh g-1 is sustained. In addition, a full cell consisting of a CuO@Al2O3 anode and a NaNi1/3Fe1/3Mn1/3O2 cathode is investigated, showcasing remarkable cycling performance. Our findings underscore the potential of these innovative flake-like architectures as electrode materials in high-performance sodium-ion batteries, paving the way for advancements in energy storage technologies.
RESUMO
Silicon (Si) is considered the most promising anode material for the next generation of lithium-ion batteries (LIBs) because of its high theoretical specific capacity and abundant reserves. However, the volume expansion of silicon in the cycling process causes the destruction of the electrode structure and irreversible capacity loss. As a result, the commercial application of silicon materials is greatly hindered. In recent years, siloxane-based organosilicon materials have been widely used in silicon anode of LIBs because of their unique structure and physical and chemical properties, and have shown excellent electrochemical properties. The comprehensive achievement of siloxanes in silicon-based LIBs can be understood better through a systematic summary, which is necessary to guide the design of electrodes and achieve better electrochemical performance. This paper systematically introduces the unique advantages of siloxane materials in electrode, surface/interface modification, binder, and electrolyte. The challenges and future directions for siloxane materials are presented to enhance their performance and expand their application in silicon-based LIBs.
RESUMO
To overcome the sluggishness of the oxygen evolution reaction (OER), the urea oxidation reaction was developed. In the case of OER application studies ZnCo2 O4 is an excellent electrocatalyst, towards the UOR has been performed with surface-grown polydopamine (PDA) with surface-grown polydopamine (PDA). ZnCo2 O4 @PDA is produced over the surface of nickel foam by a hydrothermal method followed by self-polymerization of dopamine hydrochloride. Dopamine hydrochloride was varied in solution to study the optimal growth of PDA necessary to enhance the electrochemical activity. Prepared ZnCo2 O4 @PDA was characterized by X-ray diffraction, electronic structural, and morphology/microstructure studies. With successful confirmation, the developed electrode material was applied to UOR and ZnCo2 O4 @PDA-1.5, delivering an excellent low overpotential of 80â mV at 20â mA cm-2 in the electrolyte mixture of 1â M potassium hydroxide+0.33â M urea. To support the excellent UOR activity, other electrochemical properties such as the Tafel slope, electrochemical surface active sites, and electrochemical impedance spectroscopy were also studied. Furthermore, a schematic illustration explaining the UOR mechanism is shown to allow a clear understanding of the obtained electrochemical activity. Finally, urea water electrolysis was carried out in a two-electrode symmetrical cell and compared with water electrolysis. This clearly showed the potential of the developed material for efficient electrochemical hydrogen production.
RESUMO
Electrochemical properties of metal oxide have a strong correlation with the crystalline structures. In this work, the effect of calcination temperature on the phase evolution and electrochemical properties of Sm2 O3 was systematically evaluated. The results demonstrate that the sample calcinated at 700 °C (SM-700) is composed of a pure cubic phase while it begins to convert into a monoclinic phase at a temperature above 800 °C and fully converts into a monoclinic phase at 1100 °C. Moreover, the evolution process causes atomic redistribution, and more oxygen vacancies are formed in cubic phase Sm2 O3 , contributing to the improved ionic conductivity. The ionic conductivity of 0.138â S cm-1 and maximum power density of 895â mW cm-2 at 520 °C are achieved using SM-700 as electrolyte for protonic ceramic fuel cell (PCFC). The cubic structure remains stable in the durability testing process and the SM-700 based fuel cell delivers enhanced stability of 140â mW cm-2 for 100â h. This research develops a calcination evolution process to improve the ionic conductivity and fuel cell performance of the Sm2 O3 electrolyte for stable PCFC.
RESUMO
Two novel tetrafluorobenzocarbazole and containing the amino branch introduced at the end of the molecule are synthesized by a simple method. The tetrafluorobenzocarbazole as the electron donor with electron-rich fluoride ions connected by π-benzyl ring conjugation structure, which affects the overall electron cloud density. Moreover, the amino branch introduced at the end of the molecule, which makes it easy to form intermolecular hydrogen bonds and affected photophysical properties. Meanwhile, the photophysical property of both compounds are discussed under different acidic conditions. The UV-absorption show that around ~286 nm is mainly attributed to the strong structural absorption band peak of the π-π ∗ transition of the carbazole moiety, and the irregular absorption band around ~314 nm and ~326 nm are mainly attributed to the n-π ∗ transition of the carbazole group conjugate with the adjacent molecule. The emission spectrum of both compounds showed that the intensity of fluorescence decreased in different degrees after the addition of the acidic solution. Furthermore, the electrochemical properties were evidenced by cyclic voltammetry (CV) and density functional theory (DFT) calculations, and the orbital conformation (HOMOs-LUMOs) was simulated by Gaussian 09 software and its crystal structure was observed by X-ray diffraction (XRD). The results exhibited that both compounds are electrochemically stable blue small-molecule fluorescent substances, and expected that both compounds can be novel and stable acid-sensitive organic blue-light materials.
RESUMO
How to dispose of large quantities of hazardous shale gas drilling waste is an important worldwide problem facing the oil and gas industry. In this study, we report an environmentally friendly and low energy consumption approach (carbonization followed by activation) to convert oil-based drill sludge (OBDS) and oil-based drill cuttings (OBDCs) into biochar composites and investigate the effect of hydrofluoric acid (HF) acidification on them. The biochar composites were prepared using the OBDS, OBDCs, the mixtures of OBDS and OBDCs, and HF treatment the mixtures were named OS, OC, OSC, and OSC-HF, respectively. The characterization result of synthesized biochar composites indicated that the OSC had a larger specific surface area and a higher degree of graphitization. The composites mainly consisted of SiO2 and BaSO4, except for biochar. The OSC electrode exhibited the highest oxygen evolution potential (1.72 V vs Ag/AgCl) and the lowest charge transfer resistance compared with OS, OC, and OSC-HF electrodes, implying that SiO2 plays an important role in electrochemical performance. Using the OSC electrode as an anode, the chemical oxygen demand removal efficiency of the OBDS supernatant was 79.4 ± 0.95%. Further, the OSC electrode could maintain higher degradation efficiency and stability after the fifth reuse. The study provides a promising route for the proper disposal and resource utilization of OBDS and OBDCs and proposes a novel biochar compound as an electrode for the efficient treatment of wastewater. Moreover, this work highlights the important significance of the simultaneous resource utilization of waste and the treatment of wastewater using waste materials.
RESUMO
In this study, polynuclear Cu(II) complex (1), Mn(II) and Mn(III) complex (2) have been prepared with a Schiff base ligand derived from 2-Hydroxy-3-methoxybenzaldehyde with 2-amino-2-methyl-1-propanol. The compounds were characterized by elemental analysis, FT-IR, and UV-Vis spectroscopy. The molecular and crystal structures of (1-2) were determined by the single-crystal x-ray diffraction technique. It turned out that Cu(II) complex (1) forms an S4 -symmetrical tetrameric cage structure, with square-planar coordinated Cu and bridging O atoms at the vertexes of the approximate cube. In the crystal structure of 1, there are large channels along the c-axis, between the tetramers; the solvent- DMSO molecules, occupies these channels. In turn, the complex (2) creates a centrosymmetric trimeric structure, with three octahedrally coordinated Mn ions bridged by O atoms from ligand molecules and acetate ions. The electrochemical behavior studies of the complexes in DMSO displayed the electronic effects of the groups on the redox potential. The redox behavior of Schiff base (1) and (2) complexes included quasi -reversible and irreversible voltammograms, respectively. Intermolecular interactions in the solid states were studied by Hirshfeld surface analysis. These studies provide a comprehensive description of these inter-contact exchanges using an attractive graphical representation using Hirshfeld surfaces and fingerprint plots, along with enrichment ratios. Furthermore, assessment of the inhibitory effect against coronavirus (main protease SARS-CoV-2) was performed by a molecular docking study for both complexes (1 and 2). Both complexes showed a good affinity for CoV-2 for PDB protein ID: 6M03 and 6Y2F.
RESUMO
Heteroleptic 2,3,4,5-tetraphenyl-1-monophosphaferrocene [FeCp(η5-PC4Ph4)] was obtained at a 62% yield through the reaction of lithium 2,3,4,5-tetraphenyl-1-monophosphacyclopentadienide Li(PC4Ph4) (1) with [FeCp(η6-C6H5CH3)][PF6]. The structure of 1-monophosphaferrocene 2 and its W(CO)5-complex 3 were confirmed by multinuclear NMR and single-crystal X-ray diffraction study and further supported by DFT calculations. Cyclic voltammetry demonstrated that [FeCp(η5-PC4Ph4)] 2 has a quasi-reversible oxidation wave. The comparison of the properties of phosphaferrocene 2 with those of W(CO)5-complex 3 shows the possibility of changing the coordination type during oxidation.
RESUMO
Bismuth (Bi)-based materials have attracted great attention as anodes in potassium ion batteries (PIBs) for their high theoretical capacity and suitable voltage range. Herein, the authors report a unique spindle-like structured Bi@N-doped carbon composite (SPB@NC) consisting of interconnected nano-Bi coated heteroatom-doped hard carbon layer via an interesting in situ carbon thermal reduction method. The special interconnected Bi nanoparticles gradually form porous structure with ample inner voids for accommodating volume variations while the N-doped carbon layer not only keeps the electrode stable, but also contributes to rapid electron/ion transfer. As a result, such a robust framework endows SPB@NC fast potassium storage with outstanding capacity of 276.5 mAh g-1 at 30 A g-1 (i.e., 1 min for discharge/charge) and durable cycling performance of 299.3 mAh g-1 at 5 A g-1 after 2000 cycles. Notably, a full cell assembled with potassium vanadate cathode is promising for practical applications. A series of ex situ techniques reveals the in-depth potassium storage mechanism and kinetics reactions. This work illuminates helpful insights into Bi-based anodes for PIBs.
RESUMO
A one-step Rh-catalyzed site-selective ortho-C-H alkynylation of perylene as well as naphthalene mono- and diimides is reported. A single step regioselective access to ortho-C-H alkynylated derivatives of these ryleneimides not only increases the step economy of the ortho-functionalization on these dyes but also provides a quick access route towards highly functionalized dyes that have potential optoelectronic applications. Increased solubility of tetra(triisopropylsilyl)acetylenyl PDIs in organic solvents greatly enhances their utility for further derivatization.
RESUMO
Zinc metal is abundant in nature, non-toxic, harmless, and cheap. Zinc-ion batteries (ZIBs) have also emerged as the times require, which has attracted scholars' research interest. In the zinc-ion batteries, the cathode material is indispensable. Manganese oxides are widely used in electrode materials because of their various valence states (+2, +3, +4, +7). ZnMn2 O4 (ZMO) is a mixed metal oxide with a spinel structure similar to LiMn2 O4 . Due to the synergistic effect of Zn and Mn, it has the advantages of high theoretical capacity. In recent years, researchers have gradually applied ZnMn2 O4 to zinc ion batteries. In order to obtain high-energy-density zinc ion batteries, it is also very important to match electrolytes with a wide operating voltage window and develop a highly reversible anode. In the first instance, we investigate the research progress of spinel ZnMn2 O4 as a reliable candidate material for zinc ion batteries. Later on, we review the optimization and modification measures of anode and electrolyte to improve the electrochemical properties of spinel ZnMn2 O4 . On this basis, we propose the reasonable research direction and development prospects for this material. It is hoped that there will be a help to researchers in this field.
RESUMO
Here, redox active aliphatic luminescent polymers (ALPs) are synthesized via polymerization of N,N-dimethyl-2-propenamide (DMPA) and 2-methyl-2-propenoic acid (MPA). The structures and properties of the optimum ALP3, ALP3-aggregate and Cu(I)-ALP3, ratiometric pH sensing, redox activity, aggregation enhanced emission (AEE), Stokes shift, and oxygen-donor selective coordination-reduction of Cu(II) to Cu(I) are explored via spectroscopic, microscopic, density functional theory-reduced density gradient (DFT-RDG), fluorescence quenching, adsorption isotherm-thermodynamics, and electrochemical methods. The intense blue and green fluorescence of ALP3 emerges at pH = 7.0 and 9.0, respectively, due to alteration of fluorophores from -C(âO)N(CH3 )2 / -C(âO)OH to -C(O- )âN+ (CH3 )2 / -C(âO)O- , inferred from binding energies at 401.32 eV (-C(O- )âN+ (CH3 )2 ) and 533.08 eV (-C(âO)O- ), significant red shifting in absorption and emission spectra, and peak at 2154 cm-1 . The n-π* communications in ALP3-aggregate, hydrogen bondings within 2.34-2.93 Å (intramolecular) in ALP3 and within 1.66-2.89 Å (intermolecular) in ALP3-aggregate, respectively, contribute significantly in fluorescence, confirmed from NMR titration, ratiometric pH sensing, AEE, excitation dependent emission, and Stokes shift and DFT-RDG analyses. For ALP3, Stokes shift, excellent limit of detection, adsorption capacity, and redox potentials are 13561 cm-1 /1.68 eV, 0.137 ppb, 122.93 mg g-1 , and 0.33/-1.04 V at pH 7.0, respectively.
Assuntos
Oxigênio , Polímeros , Hidrogênio , Concentração de Íons de Hidrogênio , Oxirredução , Oxigênio/química , Polímeros/químicaRESUMO
Herein, the synthesis of ferrocene-containing salts is presented. Acylation of ferrocene (Fc) according to the Friedel-Crafts method led to ω-bromoacyl ferrocenes. The ω-bromoacyl ferrocenes were subsequently introduced to quaternization reaction with tri-tert-butyl phosphine, which resulted in phosphonium salts. Obtained phosphonium salts were characterized by physical methods. The electrochemical properties of phosphonium salts were studied by cyclic voltammetry (CV). It was found that the replacement of n-butyl fragments at the phosphorus atom by tert-butyl leads to a more anodic potential shift. In contrast to isolobal structures Fc-C(O)(CH2)nP+(n-Bu)3X- and Fc-(CH2)n+1P+(n-Bu)3X-, the CV curves of Fc-C(O)(CH2)nP+(t-Bu)3X- and Fc-(CH2)n+1P+(t-Bu)3X- did not show a large discrepancy between forward and reverse currents. The transformation of the C=O groups to CH2 fragments had a significant effect on the electrochemical properties of ferrocene salts, the oxidation potential of which is close to that of pure ferrocene.