Interventions in root-filled teeth identified in general dental practice: A 6-year longitudinal observational study.

AIM: To investigate what happens to cross-sectionally identified root-filled teeth over a 6-year period, regardless of the time that elapsed since primary root canal treatment, in a cohort of adult patients regularly attending a Public Dental Service. A secondary aim was to investigate how the cumulative events affecting root-filled teeth over the same time were associated with variables obtained from a baseline examination. METHODOLOGY: Adult patients with ≥1 previously root-filled tooth and regularly attending the Public Dental Service in Örebro County were enrolled for study participation in 2015. General dental practitioners examined all identified root-filled teeth in this cohort at baseline using a standardized protocol and were also responsible for further decision-making and treatments. After six years, information on events of the root-filled teeth was collected from dental records. The highest rating (most invasive treatment) on a 5-point ordinal scale was used in the analyses. Regression analyses with stepwise selection were performed for associations between patient- and tooth-related factors and events. RESULTS: A total of 445 patients with 1007 root-filled teeth were followed the entire observation time. Twenty (2.0%) of the root-filled teeth had endodontic retreatment and 150 (14.9%) were extracted over six years. Among teeth with periapical radiolucency or pain, the majority did not undergo retreatment or extraction; however, the multivariate analysis demonstrated that retreatment or extraction was associated with baseline recordings of teeth with periapical radiolucency (p < .0001), tenderness to percussion (p < .0001), and poor coronal restoration (p < .0001). CONCLUSIONS: This study corroborates the notion that in general dentistry, root-filled teeth with radiological signs of apical disease often remain untreated over time. Furthermore, it also reveals that root-filled teeth presenting with mild pain do not necessarily receive any intervention. However, teeth with baseline signs of apical periodontitis, pain, or inadequate coronal restoration were more likely to have received intervention during the six-year period.

Biomechanical performance of endocrown and core-crown restorations: A systematic review.

OBJECTIVE: To assess and compare, through a systematic review of the literature, the biomechanical performance of endocrowns and traditional core-crowns (with and without intracanal post) for the rehabilitation of endodontically treated teeth with severe coronal structure damage. MATERIALS AND METHODS: A systematic search was performed in MEDLINE/PubMed, Scopus, and Web of Science databases. In-vitro studies comparing endocrowns with (post-)core-crown restorations were selected and screened by two independent reviewers. The included studies were submitted to the risk of bias analysis using the RoBDEMAT tool and the biomechanical outcomes were collected for qualitative analysis. The extracted data were presented based on comparative analyses among the included studies. RESULTS: Thirty-one studies were included: 9 studies evaluated restorations of molars, 14 for premolars, and 8 studies evaluated anterior restorations. For the majority of the studies, endocrowns showed either similar or greater survival rates under fatigue and monotonic load than (post-)core-crown restorations, irrespectively of the tooth. The endocrowns showed more favorable failure patterns than (post-)core-crowns, irrespectively of the tooth. Endocrowns produced lower stresses in the restorative material for molars and premolars and in the luting material for premolars than (post-)core-crown restorations. The included studies presented adequate information for most items of the RoBDEMAT risk of bias tool. CONCLUSION: Endocrowns showed similar or greater biomechanical performance than the traditional (post-)core-crown restorations in most of the evaluated studies. CLINICAL SIGNIFICANCE: This systematic review showed that endocrowns present either similar or greater biomechanical performance than core-crown restorations for anterior and posterior endodontically treated teeth with severe structural damage.

Influence of occlusal reduction design on the fracture resistance and biomechanical behavior of endocrowns restoring maxillary premolars.

PURPOSE: To investigate the effect of different occlusal reduction design on stress distribution and fracture resistance of different endocrown systems. MATERIAL AND METHODS: Sixty-four maxillary human premolars with endodontic treatment, prepared for endocrowns were divided into 2 groups (n = 32) according to the occlusal design: Butt joint preparation (B group) and Anatomical preparation (A group). Each group were subdivided into four groups according to ceramic systems: IPS E max CAD (EM group), monolithic zirconia (ZR group), Nacera Hyprid (NH group) and PEKKTON (PE group). After manufacturing of endocrowns and adhesive bonding the specimens were thermomechanically loaded and subsequently they were tested in a universal testing machine for evaluating the fracture resistance. The specimens failure mode was qualitatively assessed. The stress distribution in each group was assessed using three-dimensional finite element analysis (FEA). 1-way ANOVA and the Post Hoc Tukey HSD test were used to evaluate the data (a = .05). RESULTS: The fracture resistance values between the groups showed statistically significant variations. The B PE and A PE groups had a higher ratio of fracture resistance values. Regarding failure mode, ceramic endocrowns recorded mainly irreparable failures. FEA showed that anatomical occlusal preparation have reduced the stress concentration under all endocrown systems. CONCLUSION: Endocrowns could be used to restore endodontically treated maxillary premolars. PEKKTON endocrowns with anatomical preparations revealed most appropriate restoration. The tested new endocrown systems enhanced the biomechanical performance of the tooth. CLINICAL SIGNIFICANCE: The innovative endocrown systems (PEKK, Nacera Hyprid) can be seen as a promising choice for restoration of severely-destructed endodontic treated premolars, with less stress transmit to the residual tooth structure. Although the traditional endocrown technology might increase the longevity of tooth bonding, it shouldn't be used for clenching cases since the risk of failure is too great overall.

Evaluation of mechanical properties of anatomically customized fiber posts using E-glass short fiber-reinforced composite to restore weakened endodontically treated premolars.

OBJECTIVE: This study was conducted to assess the influence of combining different forms of fiber-reinforced composites (FRC) on the mechanical behavior and bond strength of compromised endodontically treated teeth (ETT). MATERIALS AND METHODS: Eighty extracted human premolar teeth were randomly divided into five experimental groups according to the type of intra-radicular restoration and the canal preparation design which was either non-flared (Group 1), flared (Groups 2-5), closed-apex (Groups 1,3,5) or open-apex (Groups 2,4). Standard prefabricated fiber posts were used as intra-radicular restoration for Groups 1-3 while Groups 4-5 were restored with anatomically customized relined fiber posts. After composite core fabrication, all samples were sent for an artificial aging process. Fracture resistance and push-out bond strength tests were then carried out through a universal testing machine followed by mode of failure analysis via a stereomicroscope and scanning electron microscope. RESULTS: Pairwise Log-Rank comparisons revealed that the survival rate of Group 2 and Group 3 was significantly lower than all other groups after artificial aging. The highest fracture resistance value (1796 N) was recorded in Group 5 and was significantly higher than that of the other groups (p < 0.05), while Group 2 exhibited the lowest fracture resistance (758 N), which was significantly lower compared to the other groups. Group 5 and Group 4 demonstrated a significantly higher push-out bond strength, at all root thirds, than Group 3, Group 2, and Group 1 (p < 0.05). The most frequently observed failure mode in the tested groups occurred between the resin cement and radicular dentin. CONCLUSION: The use of short fiber-reinforced composite (SFRC) to reline the prefabricated FRC post has been proven to have superior fracture resistance with favorable failure patterns and increased push-out bond strength values compared to standard prefabricated FRC posts.

Effect of endodontically treated teeth on prosthetically guided orthodontics with clear aligners: a case series.

BACKGROUND: Prosthetically guided orthodontics (PGO) can correct the malocclusion for better prosthetic rehabilitation in esthetic rehabilitation. Unlike conventional orthodontic treatment, only minor tooth movement is designed in PGO according to the requirement of subsequent restoration. For better appearance during the treatment, PGO is often performed with clear aligners, which have no metal brackets. It has been proven that the PGO with clear aligners can achieve generally satisfactory outcomes. However, its risk has not been fully known due to the paucity of relevant studies. CASE PRESENTATION: Three patients who needed esthetic rehabilitation with mild malocclusion were included in this study. After evaluation, a prosthetic solution alone was considered insufficient to provide optimal outcomes. Thus, they were treated using PGO with clear aligners (Invisalign Go, Align Technology, Santa Clara, California, USA) and accomplished prosthetic rehabilitation subsequently. Dental history and X-ray examination revealed that endodontically treated teeth (ETT) existed in all the cases. Intraoral photographs were collected to compare the pre-treatment and post-treatment dentition. After PGO, posterior ETT did not maintain their position as scheduled and lost occlusal contacts, while all the anterior teeth, including anterior ETT, were moved to the designed position. Corresponding prosthetic rehabilitation was used to solve it after consulting with the patients. CONCLUSIONS: Occlusal contact loss of posterior ETT is a potential risk in PGO with clear aligners, affecting the orthodontic result.

Optimizing fracture resistance of endodontically treated maxillary premolars restored with preheated thermos-viscous composite post-thermocycling, a comparative study. Part I.

PURPOSE: This research aimed to investigate fracture resistance of endodontically treated maxillary premolars restored using preheated thermo-viscous and fiber-reinforced bulk fill resin composite, in vitro. METHODOLOGY: Sixty sound human maxillary premolars were selected and divided randomly into 6 groups of ten teeth each (n = 10). Group 1; is the positive control with sound unprepared teeth (P), Group 2; is the negative control in which Mesio-occluso-distal (MOD) cavities were left unrestored (N), Group 3; includes the teeth restored by incremental packing with conventional nanohybrid composite (ChP), Group 4; includes teeth restored with short fiber reinforced bulk fill composite (EF), Group 5; includes teeth restored with preheated thermo-viscous bulk fill composite (VB), and Group 6; includes teeth restored using packable bulk fill composite (XF) Tested restorative materials were bonded with a universal adhesive in self-etch mode. Teeth were kept in distilled water for 24 h at 37 °C proceeded by thermocycling (5- 55 °C, 1200×). Teeth were then exposed to compressive load till fracture at a crosshead speed of 1 mm/min. One-way ANOVA followed by Tukey post-hoc test was implemented to compare between more than two groups in non-related samples. The significance level was established at α = 0.05 for both tests. RESULTS: Intact teeth significantly recorded the highest fracture resistance values among all groups. A significant difference was recorded among all the tested groups, with the EF recording the highest values, followed by the VB group then the XF group and ChP that recorded the lowest data. Negative control premolars significantly recorded the lowest fracture. CONCLUSIONS: After thermocycling, endodontically treated maxillary premolars restored with pre-heated thermos-viscous composite did not exhibit an increase in fracture resistance. Notably, our findings indicate that short fiber-reinforced composite demonstrated significantly higher fracture resistance compared to other types of composites assessed in this study. This suggests the potential superiority of short fiber-reinforced composite in enhancing the overall structural integrity of endodontically treated teeth subjected to occlusal forces.

Two-year clinical performance of indirect resin composite restorations in endodontically treated teeth with different cavity preparation designs: a randomized clinical trial.

TRIAL DESIGN: This is a randomized, controlled, superiority, double-blinded, parallel-group, two-arms trial with an allocation ratio of 1:1. This study aimed to assess whether the cavity design could affect the clinical performance of the CAD/CAM generated indirect resin composite restoration in endodontically treated teeth (ETT) evaluated using the Modified USPHS criteria after a two-year follow up. METHODS: A total of 30 participants who underwent endodontic treatment for MOD cavities in permanent molars were divided randomly into two parallel groups (n = 30 restorations) according to the performed cavity design to group 1 in which there was no cuspal reduction (inlay) and group 2 in which cuspal reduction was performed (overlay). All pulp chambers were filled with bulk fill flowable composite, and the cavities were prepared following the criteria of the cavities for indirect restorations and restored using nano-hybrid composite resin blocks (Brilliant, Coltene, Switzerland). The restorations were evaluated using the modified USPHS criteria at baseline, six months, one-year and two years follow-up visits. For qualitative data, frequencies (n) and percentages (%) were used to display the data, while mean and standard deviation (SD) were used for quantitative data. The normality of the data was evaluated using the Shapiro-Wilk and Kolmogorov-Smirnov tests. For every test, P ≤ 0.05 was used as the significance threshold. RESULTS: Twenty-six individuals completed the follow-up period after receiving the assigned intervention.The inter-group comparison showed that, at the 6- months and 12- months observation points, the overlay design had significantly better marginal adaptation, less incidence of discoloration or tooth/restoration fracture, and similar marginal integrity and caries incidence to the inlay design. After 24- months, the overlay design still had better marginal adaptation, less incidence of discoloration or tooth/restoration fracture and less caries incidence in comparison to the inlay design, while there was no difference in the marginal integrity between either design. CONCLUSIONS AND CLINICAL RELEVANCE: Cuspal reduction in endodontically treated teeth showed better clinical performance than the cusp preservation thus, the former is more reliable.

Effect of preparation design and endodontic access on fracture resistance of zirconia overlays in mandibular molars: An in vitro study.

PURPOSE: To evaluate the fracture resistance of zirconia overlays, considering various preparation designs and the presence of endodontic access. MATERIALS AND METHODS: Ninety translucent zirconia (5Y-PSZ) overlay restorations were divided into six groups (n = 15/group) based on different preparation designs, with and without endodontic access: chamfer margin 4 mm above the gingival level without (group 1) and with endodontic access (group 2); margin 2 mm above the gingival level without (group 3) and with endodontic access (group 4); overlay with no chamfer margin without (group 5) and with endodontic access (group 6). Restorations were bonded to mandibular first molar resin dies, and the groups with endodontic access were sealed with flowable resin composite. All restorations underwent 100,000 cycles of thermal cycling between 5°C and 55°C, followed by loading until fracture. Maximum load and fracture resistance were recorded. ANOVA with Tukey post-hoc tests were used for statistical comparison (α < 0.05). RESULTS: Fracture resistance significantly varied among overlay designs with and without endodontic access (p < 0.001), except for the no-margin overlays (groups 5 and 6). Overlays with a 2 mm margin above the gingival margin with endodontic access (group 4) exhibited significantly higher fracture resistance compared to both the 4-mm supragingival (group 2) and no-margin (group 6) designs, even when compared to their respective intact groups (groups 1 and 5). There were no significant differences between the no-margin and 4-mm supragingival overlays. CONCLUSION: The more extensive zirconia overlay for mandibular molars is the first choice since the 2 mm margin above the gingival level design withstood considerable loads even after undergoing endodontic access. A no-margin overlay is preferred over the 4-mm supragingival design as it preserves more tooth structure and there was no outcome difference, irrespective of endodontic access. Caution is warranted in interpreting these findings due to the in vitro nature of the study.

Diagnostic efficacy of cone-beam computed tomography for detection of vertical root fractures in endodontically treated teeth: a systematic review.

BACKGROUND: Vertical root fractures (VRFs) sometimes occur in endodontically treated teeth. They have a difficult diagnosis and a dismal result. The objective of this review was to evaluate the diagnostic performance of cone-beam computed tomography (CBCT) for detecting VRFs in teeth that had undergone endodontic treatment. METHODS: Literature was reviewed from Web of Science, PubMed, Cochrane Review, SCOPUS, and Embase databases between 2000 and 2022. The searched keywords included "endodontically treated teeth," "cone-beam computed tomography," "CBCT," "tooth fracture," "vertical root fracture," "VRF," "accuracy," "sensitivity," and "specificity." Only articles in the English language were included. The final analysis included 20 papers that satisfied the eligibility requirements. RESULTS: The overall mean ± SD values (%) for the diagnostic sensitivity and specificity of CBCT for detection of VRFs in endodontically treated teeth in the presence of root-filling materials without an intracanal post were 71.50 ± 22.19 and 75.64 ± 19.41, respectively. The overall mean (SD) value (%) for the sensitivity of CBCT for the detection of VRFs in the presence of root-filling materials and intracanal posts was 72.76 (18.73), while the mean (SD) specificity was 75.44 (18.26). The accuracy of CBCT (mean ± SD) was 78.47 ± 17.19% and 74.02 ± 10.64%, respectively, for teeth without intracanal posts and those with posts. CONCLUSIONS: Further clinical research is needed to validate the optimum efficiency of CBCT as a diagnostic technique for detecting VRFs in teeth that have had endodontic treatment, given the low sensitivity, significant heterogeneity of studies, and lack of in-vivo studies on the subject.

Effect of apical root resection, orthodontic extrusion, and surgical crown lengthening on load capability.

OBJECTIVES: This study aims to investigate the load-to-fracture of procedures changing crown-to-root ratio (RCRR) aimed to restore severely damaged upper central incisors to avoid tooth extraction compared to implant placement. There is no evidence on load capability after apical root resection (AR), orthodontic extrusion (OE), and surgical crown lengthening (SCL) in respect to RCRR, respectively. MATERIAL AND METHODS: Human maxillary central incisors were endodontically treated, decoronated, and divided into 4 groups (n = 48). The following specimen preparation was performed: (I) adhesive core-and-post build-up (control), (II) as (I) and 2 mm apical root resection (AR), (III) before adhesive core-and-post build-up teeth were shortened 2 mm coronally (OE) (IV) as (I), but specimens were embedded 4 mm instead of 2 mm below the CEJ (SCL), group (V) implant-borne restoration with individual all-ceramic abutments (n = 12; ∅4.1/l = 12 mm) (IBR). All specimens received all-ceramic crowns, thermo-mechanical (TML), and subsequent linear loading (LL) until failure. RCRR were calculated and log-rank, Kruskal-Wallis, Mann-Whitney U, ANOVA, and chi-square tests applied (p = 0.05). RESULTS: Fracture loads after subsequent LL differed significantly (p = 0.001) between groups, while implants showed the highest values. Fmax median (min/max) were as follows: (I) 252 (204/542), (II) 293 (243/443), (III) 253 (183/371), (IV) 195 (140/274), and (V) 446 (370/539). Pair-wise comparison showed significant differences (p = 0.001) between group I/IV and group V, I, and IV (p = 0.045), II and IV (p = 0.001), and III compared to IV (p = 0.033), respectively. RCRR below 1 significantly increased load capability compared to RCRR = 1. CONCLUSIONS: OE appears to preferably ensure biomechanical stability of teeth that are endodontically treated and receive core-and-post and crown placement compared to SCL. AR has no adverse biomechanical impact. RCRR < 1 is biomechanically beneficial. CLINICAL RELEVANCE: For endodontically treated and restored teeth, orthodontic extrusion should be preferred compared to surgical crown lengthening prior single-crown restoration. As orthodontic extrusion, apical root resection has no adverse effect on load capability. Single-crown implant-borne restorations are most load capable.

Influence of alveolar bone height on the biomechanical behavior of roots restored with custom-made posts-and-cores.

OBJETIVE: This study evaluated the influence of alveolar bone height and post type on compressive force resistance, fracture pattern, and stress distribution in endodontically treated teeth. MATERIALS AND METHODS: Bovine roots were endodontically treated and divided into eight groups (n = 10) according to alveolar bone height (normal alveolar bone and alveolar bone loss - 2 and 5 mm from the margin of the crown, respectively) and post type (prefabricated glass fiber post, anatomic glass fiber post, customized milled glass fiber post-and-core and customized milled polyetheretherketone (PEEK) post-and-core). Mechanical fatigue was simulated (300.000 cycles/50 N/1.2 Hz). Compression force resistance (N) was analyzed by two-way ANOVA and Tukey test (α = 0.05). Fracture patterns were described as percentages. Stress distribution was analyzed by finite element analysis. RESULTS: Significant diferences were found for alveolar bone height (P < 0.0001): normal alveolar bone groups showed higher mean values of compression force resistance compared to alveolar bone loss groups, while no significant differences were found for post type (P = 0.4551), and there was no double interaction between them (P = 0.5837). Reparable fractures were more predominant in normal alveolar bone groups, especially in the milled glass fiber and PEEK post-and-core groups. Stress distribution was similar in groups with prefabricated glass fiber posts and milled PEEK posts-and-cores, and the alveolar bone loss condition significantly increased stress concentration and strain values, mainly on apical dentin. CONCLUSIONS: Alveolar bone loss due to physiological aging and/or periodontal disease may lead to increased risk of restored tooth failure, although milled glass fiber and PEEK posts-and-cores provide more reparable fractures. CLINICAL SIGNIFICANCE: Custom-made glass fiber and PEEK post-and-cores are interesting options, since they enable clinicians to work with a single-body post-and-core system that avoid several materials interfaces and fits well in the root canal provided promising results to improve the failure behavior of restored roots, as they offer more reparable fractures even in situations of alveolar bone loss.

Effect of pulp chamber depth on failure load and mode of failure of CAD/CAM endocrowns.

AIM: The present study aimed to investigate the effect of pulp chamber depth on the failure load and mode of failure of CAD/CAM endocrowns. MATERIALS AND METHODS: Thirty mandibular molars were sectioned above the cementoenamel junction (CEJ), followed by root canal treatment. Teeth were sectioned at a level of 1.5 mm above the CEJ, arranged from the lowest to the highest depths, and divided into three groups (n = 10): group SE: Shallow pulp chamber (1.42 to 2.17 mm); group IE: Intermediate pulp chamber (2.25 to 3.17 mm); group DE: Deep pulp chamber (3.33 to 5.17 mm). CAD/CAM endocrowns were fabricated by milling lithium disilicate ceramic blocks and were cemented using resin cement. Teeth were embedded in acrylic resin at 2 mm below the CEJ, and a compressive load was applied to create a 45-degree angled functional loading simulation until the occurrence of failure. RESULTS: The mean failure loads were highest in group DE (1893.75 ± 496.08 N) compared with groups IE (1103.71 ± 254.59 N) and SE (1084.63 ± 240.92 N), with statistically significant differences between group DE and both groups IE and SE (P < 0.001). Pearson correlation coefficient (PCC) revealed a strong positive correlation between the pulp chamber depth and failure load of the endocrowns. The failure mode for all samples was catastrophic failure. CONCLUSION: The pulp chamber depth affected the failure load of the teeth restored with endocrowns. The failure loads were higher in teeth with a greater pulp chamber depth. (Int J Comput Dent 2023;26(1): 31-0; doi: 10.3290/j.ijcd.b3818295).

The influence of Zirconia and Fiber posts with different lengths on Fracture strength of Maxillary Central Incisors restored with zirconia crowns - An in vitro study.

PURPOSE: Endodontically treated teeth are more susceptible to fractures than vital teeth because of significant coronal and radicular dentin loss during endodontic therapeutic procedures. The objective of this study was to estimate and compare the influence of length and post type on the fracture strength of endodontically treated maxillary central incisors. MATERIAL AND METHODS: In this in vitro study, sixty extracted human maxillary central incisors were decoronated 2 mm above the cemento-enamel junction.They were selected and subjected to standard endodontic treatment ,resulting in preparation with lengths of 5 mm (group 5mm),7,5 mm (group 7,5 mm) and 10 mm (group 10mm). Each group was randomly divided into 2 subgroups according to the post type , zirconia and fiber post. After appropriate surface treatment,they were cementet with resin adhesive cement and restored with zirconia crowns. Thermocycling (5 -55°C, 60 seconds, 1500 cycles) was performed after cementing the zirconia crowns on each tooth. Prepared samples were subjected to compresive static load of 0.5mm / min, at an angle of 130° to the long axis of the roots, using Universal Testing Machine (Matest ) at an cross head speed of 0.5 mm / min, until fracture.The significance of the results was assessed using 2-way ANOVA and the Tukey-Kramer test (α=0.05) Results:The ANOVA analysis indicated significant differences (P<0.05) between the groups. Tukey test revealed no significant difference among the zirconia posts of 5-mm length (26.5 N ±13.4) 7,5-mm length (25.2 N ±13.9), and 10-mm length (17.1 N ±5.2). Also, in the fiber post group, there was no significant difference when posts of 7.5-mm length (13.4 N ±11.0) were compared with the 5-mm (6.9 N ±4.6) and 10-mm (31.7 N ±13.1) groups. The 10-mm long post displayed superior fracture strength, and the 5mm-long post showed significantly lower mean values (P<0.001). CONCLUSION: The fracture strength of zirconia posts (5-mm and 7,5- mm length)was found to be significantly higher than those of fiber posts (5-mm and 7,5- mm length). The 10-mm long fiberpost group demonstrated significantly higher values of fracture strengths and the 5-mm long fiberpost group showed the lowest values for the force resulting in root fracture; these groups were significantly different from each other (P<.001).The fracture strength analysis with Universal Testing Machine is the only method that enables us to estimate the differences between zirconia and fiber posts with different lengths on endodontically treated teeth.

Effect of silicone-based sealers on fiber post retention: An in vitro study.

PURPOSE: The effect of a silicone-based sealer on fiber post retention has not been the subject of research and remains unclear. This study aimed to evaluate and compare the impact of a silicone-based sealer and an epoxy resin sealer on fiber post retention. MATERIAL AND METHODS: Forty extracted human mandibular premolars that were caries-free, single-rooted, and possessed straight single canals were the specimens of the present study. Teeth were randomly divided into two groups (n = 20 each). All specimens were prepared using gutta-percha. The sealer used in the first group was Guttaflow 2, while AH26 was used in the second group. Post spaces were prepared immediately after obturation for each specimen. Prefabricated fiber posts were luted in both groups using a self-adhesive resin cement (RelyX-U200). Each specimen was vertically secured using a universal testing machine (Instron Corp.) and a constant pull-out force at a loading rate of 0.5 mm/min was applied until the point of dislodgement. Data were analyzed using t-tests. RESULTS: A significant difference was found between the mean of maximum loads of the silicone-based sealer and epoxy resin sealer groups (p = 0.0001). The mean maximum load for the epoxy resin sealer group was 194.62 N, while that for the silicone-based sealer group was 111.64 N. CONCLUSION: Fiber post retention in teeth obturated using silicone-based sealer was inferior to that in teeth obturated with epoxy resin sealer. Therefore, the sealer used during obturation can significantly affect fiber post retention.

The influence of horizontal glass fiber posts on fracture strength and fracture pattern of endodontically treated teeth: A systematic review and meta-analysis of in vitro studies.

PURPOSE: This systematic review and meta-analysis aimed to summarize available evidence regarding the effect of horizontal glass fiber posts (HGFPs) on fracture strength and fracture pattern of endodontically treated teeth (ETT) compared to controls without HGFP. The review protocol was registered on the OSF registries. METHODS: Literature searches were conducted in MEDLINE/PubMed, Scopus, Web of Science, Embase, Google Scholar, and ProQuest for all relevant studies published up to February 2022. All in vitro studies that assessed the influence of HGFPs on fracture strength and fracture pattern of ETT whether mesio-occluso-distal or mesio-occlusal or DO cavities were considered eligible. Review Manager (RevMan) was used for the meta-analysis. Subgroup and funnel plot analyses were also performed. Quality assessment was conducted by two independent reviewers. RESULTS: A total of 12 articles met the inclusion criteria, and 10 studies underwent quantitative evaluation. The pooled effect showed that fracture resistance of molar teeth restored with HGFP was significantly higher than teeth without HGFP (standardized mean difference [SMD]: 1.61, 95% confidence interval [CI]: 0.14, 3.09, p = 0.03), whereas marginally significant for premolars (SMD: 1.36, 95% CI: -0.00, 2.73, p = 0.05). Regarding fracture patterns, the presence of an HGFP significantly increased the occurrence of restorable fracture patterns for premolars (odds ratios [OR]: 4.15, 95% CI: 1.60, 10.82, p = 0.004) compared to controls, whereas the difference was not significant for molars (OR: 1.09, 95% CI: 0.43, 2.77, p = 0.85). Moderate risk of bias was identified in 9/12 studies; one study showed a high risk of bias and two studies showed a low risk of bias. CONCLUSIONS: Within the limitations of this study, there is evidence from in vitro studies that the use of HGFP increases the fracture resistance of the ETT when compared to teeth without HGFP and also reduces the occurrence of non-restorable fractures for premolars. However, well-conducted in vitro and prospective clinical studies are warranted to validate this finding.

The Incidence of Retrograde Peri-Implantitis in a Single University Dental Hospital Training Center: A Retrospective Analysis.

Background and objective: Retrograde peri-implantitis (RPI) is a periapical radiolucent lesion developed around the implant apex. This study aimed to investigate the Incidence of RPI in a single university dental hospital training center. Materials and Methods: All records of patients who received single Implants between 2016-2020 were screened. For cases that met inclusion criteria, clinical and radiographic data were analyzed. Results: A total of 215 were included and categorized as follows, Category A: implants were placed next to endodontically treated teeth (n = 58, 27%); category B, implants placed at the sites with previous endodontic involvement within 6 months of tooth extraction (n = 25, 11.6%); Category AB: implants placed at sites that fulfill the criteria of groups A and B (n = 18, 8.4%); and Category C: Implants that were placed next to vital teeth and at a site with no previous endodontic treatment or a site that was allowed to heal for more than six (n = 114, 53%). Categories A, B and AB served as the endodontically involved (EI) group, while category C served as non- endodontically involved (NEI) group. Only two sites (0.9%) were confirmed as RPI, both from group A (3.4%). Comparing all groups studied showed no statistically significant difference in RPI incidence. Conclusions: The incidence of RPI is low; however, endodontically treated teeth with periapical lesions (PALs) next to an implant site could contribute to RPI.

Radiographic Evaluation of the Gap between Cemented Post and Remaining Gutta-Percha in Endodontically Treated Teeth Performed by Undergraduate Students: A Retrospective Cross-Sectional Study.

The coronal seal in root canal-treated teeth may be compromised depending on the accuracy of post space preparation and post cementation along with remaining gutta-percha. Root canal treatment can be compromised by endotoxins released by the coronal bacteria as a result of microleakage. The study was conducted by undergraduate students to measure the gap between the cemented post and residual gutta-percha. In total, 217 endodontically treated teeth were evaluated with intraoral peri-apical radiographs. Based on the intraoral periapical radiographic examination in the CS-R4 program, Group I had no gap, Group II had a gap of >0 to 2 mm, and Group III had a gap of more than 2 mm between the end of the cemented post and the remaining gutta-percha. In total, 40% (n = 87) of the teeth had no gap, 59% (127) had a gap of >0 to 2 mm, and 1% (n = 3) had a gap of more than 2 mm between the cemented post end and remaining gutta. Chi square test revealed a significant difference in the gap between the post and remaining gutta-percha between males and females students (p < 0.001). In terms of the gap between the cemented post end and the residual gutta-percha, the root canal treated teeth with post and core by undergraduates were clinically acceptable.

Influence of the Fiber Post Length on the Fracture Strength of Endodontically Treated Teeth.

Background and Objectives: Although fiber posts are widely used in the restoration of endodontically treated teeth (ETT), their ideal cementation depth into the root canal is still debated in literature. The aim of the present study was to evaluate whether the different intra-radicular insertion lengths of the fiber posts influence the fracture strength of ETT. Materials and Methods: A total of 10 permanent human lower incisors with straight roots of similar length and volume extracted for periodontal reason were sectioned 2 mm above the cement-enamel junction (CEJ) to a total length of 18 mm and endodontically treated in the same manner, then randomly divided into two groups of five each (Groups 1 and 2, n = 5). Two sound incisors, with no endodontic treatment, were used as the control group (Group 3, n = 2). After one week of storage in a humid environment, spaces for fiber post no. 1 (Reforpost, Angelus, Londrina, PR, Brazil) were prepared in the first two groups at a depth of 5 mm (Group 1) and 7 mm (Group 2), and the fiber posts were adhesively cemented using self-adhesive resin cement (Maxcem Elite, Kerr GmbH, Herzogenrath, Germany). After 7 days, the samples were vertically positioned and fixed in a self-curing transparent acrylic resin, up to 2 mm below the CEJ level, and mechanically tested in compression after another week of storage using a displacement-controlled testing machine up to each sample's fracture. The force-displacement curves were recorded for each sample, the means were calculated for each group and a statistical comparative analysis between groups was conducted. Results: Although no statistically significant differences between groups were observed, the highest mean fracture force (N) was recorded in Group 2 (1099.41 ± 481.89) in comparison to Group 1 (985.09 ± 330.28), even when compared to the sound, non-treated teeth (1045.69 ± 146.19). Conclusions: Within the limitations of this in vitro study, teeth where fiber posts were placed deeper into the root canal (7 mm) recorded slightly higher fracture forces in comparison with shorter lengths (5 mm). However, similar biomechanical performances obtained in the mechanical tests showed no statistical differences between the 7 mm and the 5 mm inserted posts.

Comparison of Fracture Resistance between Different Treatment Modalities of Mutilated Endodontically Treated Teeth Using Polyether Ether Ketone.

AIM: To compare fracture resistance of multiple treatment modalities intended for mutilated teeth using polyether ether ketone (PEEK) and zirconia materials. MATERIALS AND METHODS: The study was divided into four groups according to treatment modality adopted (n = 14): fiber post (F), Nayyar core (N), endocrown (E), and Richmond crown (R). Each group was further subdivided into two groups (n = 7) according to the type of material used: zirconia (Z) and PEEK (P). Using computer-aided design/computer-aided manufacturing, restorations were constructed from both materials following tested treatment options and manufacturer direction. Finished restorations were then tried, seated, and cemented to their corresponding acrylic teeth. All specimens were tested for fracture resistance in universal testing machine with cross head speed of 0.5 mm/min speed until failure, which was confirmed by a sudden drop in the measurements of the testing machine. Results were recorded, tabulated, and statistically analyzed. Shapiro-Wilk normality tests were considered to evaluate the normality of the data distributions. One-way analysis of variance (ANOVA) followed by Tukey's post hoc analysis was conducted to analyze the fracture resistance significant differences. RESULTS: Descriptive statistics of the restoration material revealed statistically a higher mean value for PEEK material (3609 ± 188.1) than zirconia (2404 ± 425.6). One-way ANOVA revealed statistically significant differences between zirconia group (p < 0.0001). Regarding zirconia group statistical significance was detected between fiber post vs endocrown (p = 0.0299), fiber post vs Richmond crown (p < 0.0001), and Nayyar core vs Richmond crown (p = 0.0004). However, there was no statistically significant difference between PEEK group (P = 0.1614). CONCLUSION: Polyether ether ketone could present a reliable treatment option in endodontically treated teeth. CLINICAL SIGNIFICANCE: Using one-piece Richmond crowns constructed of PEEK could present a viable treatment option against conventional treatment options of root canal treatment (RCT) single-rooted teeth.

Fatigue performance of endodontically treated premolars restored with direct and indirect cuspal coverage restorations utilizing fiber-reinforced cores.

OBJECTIVES: The aim of this in vitro study was to investigate the fatigue survival and fracture behavior of endodontically treated (ET) premolars restored with different types of post-core and cuspal coverage restorations. MATERIALS AND METHODS: MOD cavities were prepared on 108 extracted maxillary premolars. During the endodontic treatment, all teeth were instrumented with rotary files (ProTaper Universal) to the same apical enlargement (F2) and were obturated with a matched single cone obturation. After the endodontic procedure, the cavities were restored with different post-core and overlay restorations (n = 12/group). Three groups (A1-A3) were restored with either conventional composite core (PFC; control) or flowable short-fiber-reinforced composite (SFRC) core with/without custom-made fiber posts and without overlays. Six groups had similar post-core foundations as described above but with either direct PFC (B1-B3) or indirect CAD/CAM (C1-C3) overlays. Fatigue survival was tested for all restorations using a cyclic loading machine until fracture occurred or 50,000 cycles were completed. Kaplan-Meyer survival analysis was conducted, followed by pairwise post hoc comparisons. RESULTS: None of the restored teeth survived all 50,000. Application of flowable SFRC as luting-core material with fiber post and CAD/CAD overlays (Group C3) showed superior performance regarding fatigue survival (p < 0.05) to all the other groups. Flowable SFRC with fiber post and direct overlay (Group B3) showed superior survival compared to all other direct techniques (p < 0.05), except for the same post-core foundation but without cuspal coverage (Group A3). CONCLUSIONS: Custom-made fiber post and SFRC as post luting core material with or without cuspal coverage performed well in terms of fatigue resistance and survival when used for the restoration of ET premolars. CLINICAL RELEVANCE: The fatigue survival of direct and indirect cuspal coverage restorations in ET MOD premolars is highly dependent on whether the core build-up is fiber-reinforced or not. The combination of short and long fibers in the form of individualized post-cores seems to offer a favorable solution in this situation.