Entropy of Conduction Electrons from Transport Experiments.

The entropy of conduction electrons was evaluated utilizing the thermodynamic definition of the Seebeck coefficient as a tool. This analysis was applied to two different kinds of scientific questions that can-if at all-be only partially addressed by other methods. These are the field-dependence of meta-magnetic phase transitions and the electronic structure in strongly disordered materials, such as alloys. We showed that the electronic entropy change in meta-magnetic transitions is not constant with the applied magnetic field, as is usually assumed. Furthermore, we traced the evolution of the electronic entropy with respect to the chemical composition of an alloy series. Insights about the strength and kind of interactions appearing in the exemplary materials can be identified in the experiments.

Preserving Metamagnetism in Self-Assembled FeRh Nanomagnets.

Preparing and exploiting phase-change materials in the nanoscale form is an ongoing challenge for advanced material research. A common lasting obstacle is preserving the desired functionality present in the bulk form. Here, we present self-assembly routes of metamagnetic FeRh nanoislands with tunable sizes and shapes. While the phase transition between antiferromagnetic and ferromagnetic orders is largely suppressed in nanoislands formed on oxide substrates via thermodynamic nucleation, we find that nanomagnet arrays formed through solid-state dewetting keep their metamagnetic character. This behavior is strongly dependent on the resulting crystal faceting of the nanoislands, which is characteristic of each assembly route. Comparing the calculated surface energies for each magnetic phase of the nanoislands reveals that metamagnetism can be suppressed or allowed by specific geometrical configurations of the facets. Furthermore, we find that spatial confinement leads to very pronounced supercooling and the absence of phase separation in the nanoislands. Finally, the supported nanomagnets are chemically etched away from the substrates to inspect the phase transition properties of self-standing nanoparticles. We demonstrate that solid-state dewetting is a feasible and scalable way to obtain supported and free-standing FeRh nanomagnets with preserved metamagnetism.

SARS-CoV-2 Infection Dysregulates Host Iron (Fe)-Redox Homeostasis (Fe-R-H): Role of Fe-Redox Regulators, Ferroptosis Inhibitors, Anticoagulants, and Iron-Chelators in COVID-19 Control.

Severe imbalance in iron metabolism among SARS-CoV-2 infected patients is prominent in every symptomatic (mild, moderate to severe) clinical phase of COVID-19. Phase-I - Hypoxia correlates with reduced O2 transport by erythrocytes, overexpression of HIF-1α, altered mitochondrial bioenergetics with host metabolic reprogramming (HMR). Phase-II - Hyperferritinemia results from an increased iron overload, which triggers a fulminant proinflammatory response - the acute cytokine release syndrome (CRS). Elevated cytokine levels (i.e. IL6, TNFα and CRP) strongly correlates with altered ferritin/TF ratios in COVID-19 patients. Phase-III - Thromboembolism is consequential to erythrocyte dysfunction with heme release, increased prothrombin time and elevated D-dimers, cumulatively linked to severe coagulopathies with life-threatening outcomes such as ARDS, and multi-organ failure. Taken together, Fe-R-H dysregulation is implicated in every symptomatic phase of COVID-19. Fe-R-H regulators such as lactoferrin (LF), hemoxygenase-1 (HO-1), erythropoietin (EPO) and hepcidin modulators are innate bio-replenishments that sequester iron, neutralize iron-mediated free radicals, reduce oxidative stress, and improve host defense by optimizing iron metabolism. Due to its pivotal role in 'cytokine storm', ferroptosis is a potential intervention target. Ferroptosis inhibitors such as ferrostatin-1, liproxstatin-1, quercetin, and melatonin could prevent mitochondrial lipid peroxidation, up-regulate antioxidant/GSH levels and abrogate iron overload-induced apoptosis through activation of Nrf2 and HO-1 signaling pathways. Iron chelators such as heparin, deferoxamine, caffeic acid, curcumin, α-lipoic acid, and phytic acid could protect against ferroptosis and restore mitochondrial function, iron-redox potential, and rebalance Fe-R-H status. Therefore, Fe-R-H restoration is a host biomarker-driven potential combat strategy for an effective clinical and post-recovery management of COVID-19.

Controlling the Metamagnetic Phase Transition in FeRh/MnRh Superlattices and Thin-Film Fe50-xMnxRh50 Alloys.

Equiatomic and chemically ordered FeRh and MnRh compounds feature a first-order metamagnetic phase transition between antiferromagnetic and ferromagnetic order in the vicinity of room temperature, exhibiting interconnected structural, magnetic, and electronic order parameters. We show that these two alloys can be combined to form hybrid metamagnets in the form of sputter-deposited superlattices and alloys on single-crystalline MgO substrates. Despite being structurally different, the magnetic behavior of the alloys with substantial Mn content resembles that of the FeRh/MnRh superlattices in the ultrathin individual layer limit. For FeRh/MnRh superlattices, dissimilar lattice distortions of the constituent FeRh and MnRh layers at the antiferromagnetic-ferromagnetic transition cause double-step transitions during cooling, while the magnetization during the heating branch shows a smooth, continuous trend. For Fe50-xMnxRh50 alloy films, the substitution of Mn at the Fe sites introduces an effective tensile in-plane strain and magnetic frustration in the highly ordered epitaxial films, largely influencing the phase transition temperature TM (by more than 150 K). In addition, Mn acts as a surfactant, enabling the growth of continuous thin films at higher temperatures. Thus, the introduction of hybrid FeRh-MnRh systems with adjustable parameters provides a pathway for the realization of tunable spintronic devices based on magnetic phase transitions.

Recent developments on the magnetic and electrical transport properties of FeRh- and Rh-based heterostructures.

It is fascinating how the binary alloy FeRh has been the subject of a vast number of studies almost solely for a single-phase transition. This is, however, reasonable, considering how various degrees of freedom are intertwined around this phase transition. Furthermore, the tunability of this phase transition-the large response to tuning parameters, such as electric field and strain-endows FeRh huge potential in applications. Compared to the bulk counterpart, FeRh in the thin-film form is superior in many aspects: materials in thin-film form are often more technologically relevant in the first place; in addition, the substrates add extra dimensions to the tunability, especially when the substrate itself is multiferroic. Here we review recent developments on the magnetic and transport properties of heterostructures based on FeRh and its end-member Rh, with the latter providing a new route to exploiting spin-orbit interactions in functional spintronic heterostructures other than the more often employed 5dmetals. The methods utilized in the investigation of the physical properties in these systems, and the design principles employed in the engineering thereof may conceivably be extended to similar phase transitions to other magnetic materials.

Enhanced Performance of ΔTad upon Frequent Alternating Magnetic Fields in FeRh Alloys by Introducing Second Phases.

The cyclability and frequency dependence of the adiabatic temperature change (ΔTad) under an alternating magnetic field (AMF) are significantly important from the viewpoint of refrigeration application. Our studies demonstrated, by direct measurements, that the cyclability and low-magnetic-field performance of ΔTad in FeRh alloys can be largely enhanced by introducing second phases. The ΔTad under a 1.8 T, 0.13 Hz AMF is reduced by 14%, which is much better than that (40-50%) of monophase FeRh previously reported. More importantly, the introduction of second phases enables the antiferromagnetic-ferromagnetic phase transition to be driven by a lower magnetic field. Thus, ΔTad is significantly enhanced under a 0.62 T, 1 Hz AMF, and its value is 70% larger than that of monophase FeRh previously reported. Although frequency dependence of ΔTad occurs, the specific cooling power largely increases by 11 times from 0.17 to 1.9 W/g, as the frequency increases from 1 to 18.4 Hz under an AMF of 0.62 T. Our analysis of the phase transition dynamics based on magnetic relaxation measurements indicates that the activation energy barrier is lowered owing to the existence of second phases in FeRh alloys, which should be responsible for the reduction of the driving field. This work provides an effective way to enhance the cyclability and low-magnetic-field performance of ΔTad under an AMF in FeRh alloys by introducing second phases.

Creating a Ferromagnetic Ground State with Tc Above Room Temperature in a Paramagnetic Alloy through Non-Equilibrium Nanostructuring.

Materials with strong magnetostructural coupling have complex energy landscapes featuring multiple local ground states, thus making it possible to switch among distinct magnetic-electronic properties. However, these energy minima are rarely accessible by a mere application of an external stimuli to the system in equilibrium state. A ferromagnetic ground state, with Tc above room temperature, can be created in an initially paramagnetic alloy by nonequilibrium nanostructuring. By a dealloying process, bulk chemically disordered FeRh alloys are transformed into a nanoporous structure with the topology of a few nanometer-sized ligaments and nodes. Magnetometry and Mössbauer spectroscopy reveal the coexistence of two magnetic ground states, a conventional low-temperature spin-glass and a hitherto-unknown robust ferromagnetic phase. The emergence of the ferromagnetic phase is validated by density functional theory calculations showing that local tetragonal distortion induced by surface stress favors ferromagnetic ordering. The study provides a means for reaching conventionally inaccessible magnetic states, resulting in a complete on/off ferromagnetic-paramagnetic switching over a broad temperature range.

Direct-Write of Nanoscale Domains with Tunable Metamagnetic Order in FeRh Thin Films.

We have directly written nanoscale patterns of magnetic ordering in FeRh films using focused helium-ion beam irradiation. By varying the dose, we pattern arrays with metamagnetic transition temperatures that range from the as-grown film temperature to below room temperature. We employ transmission electron microscopy, X-ray diffraction, and temperature-dependent transport measurements to characterize the as-grown film, and magneto-optic Kerr effect imaging to quantify the He+ irradiation-induced changes to the magnetic order. Moreover, we demonstrate temperature-dependent optical microscopy and conductive atomic force microscopy as indirect probes of the metamagnetic transition that are sensitive to the differences in dielectric properties and electrical conductivity, respectively, of FeRh in the antiferromagnetic (AF) and ferromagnetic (FM) states. Using density functional theory, we quantify strain- and defect-induced changes in spin-flip energy to understand their influence on the metamagnetic transition temperature. This work holds promise for in-plane AF-FM spintronic devices, by reducing the need for multiple patterning steps or different materials, and potentially eliminating interfacial polarization losses due to cross material interfacial spin scattering.

Flexible Antiferromagnetic FeRh Tapes as Memory Elements.

The antiferromagnetic to ferromagnetic transition occurring above room temperature in FeRh is attracting interest for applications in spintronics, with perspectives for robust and untraceable data storage. Here, we show that FeRh films can be grown on a flexible metallic substrate (tape shaped), coated with a textured rock-salt MgO layer, suitable for large-scale applications. The FeRh tape displays a sharp antiferromagnetic to ferromagnetic transition at about 90 °C. Its magnetic properties are preserved by bending (radii of 300 mm), and their anisotropic magnetoresistance (up to 0.05%) is used to illustrate data writing/reading capability.

Nanowire facilitated transfer of sensitive TEM samples in a FIB.

We introduce a facile approach to transfer thin films and other mechanically sensitive TEM samples inside a FIB with minimal introduction of stress and bending. The method is making use of a pre-synthetized flexible freestanding Ag nanowire attached to the tip of a typical tungsten micromanipulator inside the FIB. The main advantages of this approach are the significantly reduced stress-induced bending during transfer and attachment of the TEM sample, the very short time required to attach and cut the nanowire, the operation at very low dose and ion current, and only using the e-beam for Pt deposition during the transfer of sensitive TEM samples. This results in a reduced sample preparation time and reduced exposure to the ion beam or e-beam for Pt deposition during the sample preparation and thus also reduced contamination and beam damage. The method was applied to a number of thin films and different TEM samples in order to illustrate the advantageous benefits of the concept. In particular, the technique has been successfully tested for the transfer of a thin film onto a MEMS heating chip for in situ TEM experiments.

Controlling the Oxidation of Magnetic and Electrically Conductive Solid-Solution Iron-Rhodium Nanoparticles Synthesized by Laser Ablation in Liquids.

This study focuses on the synthesis of FeRh nanoparticles via pulsed laser ablation in liquid and on controlling the oxidation of the synthesized nanoparticles. Formation of monomodal γ-FeRh nanoparticles was confirmed by transmission electron microscopy (TEM) and their composition confirmed by atom probe tomography (APT). For these particles, three major contributors to oxidation were analysed: (1) dissolved oxygen in the organic solvents, (2) the bound oxygen in the solvent and (3) oxygen in the atmosphere above the solvent. The decrease of oxidation for optimized ablation conditions was confirmed through energy-dispersive X-ray (EDX) and Mössbauer spectroscopy. Furthermore, the time dependence of oxidation was monitored for dried FeRh nanoparticles powders using ferromagnetic resonance spectroscopy (FMR). By magnetophoretic separation, B2-FeRh nanoparticles could be extracted from the solution and characteristic differences of nanostrand formation between γ-FeRh and B2-FeRh nanoparticles were observed.

Effects of Interface Induced Natural Strains on Magnetic Properties of FeRh.

FeRh is a unique alloy which shows temperature dependent phase transition magnetic properties. The lattice parameter (a) of this CsCl-type (B2) structure is 4.1712 Å. It undergoes a first order transition from antiferromagnetic (AFM) to ferromagnetic (FM) order at around 370K and hysteretic behavior while cooling and heating. This meta-magnetic transition of FeRh is accompanied by an isotropic expansion in the unit cell volume, which indicates strong coupling between magnetic and structural properties of FeRh. Consequently, the magnetic and transport properties, such as magnetoresistance (MR), are changed during the transition. Due to its unique thermo-magnetic behaviors, FeRh is very important for future spintronic devices. The structure could be applicable for MR devices such as memory, sensors, and many other applications. It is critical to understand how to systematically influence phase transition of FeRh from naturally applied strains. Here, we investigate magnetic properties of FeRh in different strain environments induced by the substrates with different lattice parameters. The study was performed using synchrotron radiation, temperature dependent magnetometry, and magnetic scanning probe microscopy in addition to Landau theory calculations. We found that the naturally induced strains could modulate the magnetic phase locally and globally. The presence of the segments from the nucleation of the ferromagnetic domains, with a very thin layer in the antiferromagnetic matrix and the domain growth, were observed gradually. Using the systematic phenomena, it could be used for immediate applications in the future generation of phase change random access memory (PC-RAM) devices.