RESUMO
Anti-viral surface coatings are under development to prevent viral fomite transmission from high-traffic touch surfaces in public spaces. Copper's anti-viral properties have been widely documented, but the anti-viral mechanism of copper surfaces is not fully understood. We screened a series of metal and metal oxide surfaces for anti-viral activity against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent of coronavirus disease (COVID-19). Copper and copper oxide surfaces exhibited superior anti-SARS-CoV-2 activity; however, the level of anti-viral activity was dependent on the composition of the carrier solution used to deliver virus inoculum. We demonstrate that copper ions released into solution from test surfaces can mediate virus inactivation, indicating a copper ion dissolution-dependent anti-viral mechanism. The level of anti-viral activity is, however, not dependent on the amount of copper ions released into solution per se. Instead, our findings suggest that degree of virus inactivation is dependent on copper ion complexation with other biomolecules (e.g., proteins/metabolites) in the virus carrier solution that compete with viral components. Although using tissue culture-derived virus inoculum is experimentally convenient to evaluate the anti-viral activity of copper-derived test surfaces, we propose that the high organic content of tissue culture medium reduces the availability of "uncomplexed" copper ions to interact with the virus, negatively affecting virus inactivation and hence surface anti-viral performance. We propose that laboratory anti-viral surface testing should include virus delivered in a physiologically relevant carrier solution (saliva or nasal secretions when testing respiratory viruses) to accurately predict real-life surface anti-viral performance when deployed in public spaces.IMPORTANCEThe purpose of evaluating the anti-viral activity of test surfaces in the laboratory is to identify surfaces that will perform efficiently in preventing fomite transmission when deployed on high-traffic touch surfaces in public spaces. The conventional method in laboratory testing is to use tissue culture-derived virus inoculum; however, this study demonstrates that anti-viral performance of test copper-containing surfaces is dependent on the composition of the carrier solution in which the virus inoculum is delivered to test surfaces. Therefore, we recommend that laboratory surface testing should include virus delivered in a physiologically relevant carrier solution to accurately predict real-life test surface performance in public spaces. Understanding the mechanism of virus inactivation is key to future rational design of improved anti-viral surfaces. Here, we demonstrate that release of copper ions from copper surfaces into small liquid droplets containing SARS-CoV-2 is a mechanism by which the virus that causes COVID-19 can be inactivated.
Assuntos
COVID-19 , SARS-CoV-2 , Humanos , Cobre/farmacologia , Antivirais , Óxidos , ÍonsRESUMO
BACKGROUND: The role of environmental contamination in COVID-19 transmission within hospitals is still of interest due to the significant impact of outbreaks globally. However, there is a scarcity of data regarding the utilization of environmental sampling for informing infection control measures during SARS-CoV-2 outbreaks. METHODS: This retrospective study analyzed incident event investigations conducted at a single center from May 1, 2021, to August 31, 2021. Investigations were initiated following the identification of a COVID-19 confirmed case (referred to as the index case) who had stayed in a hospital area outside the dedicated COVID-19 ward/bed and without specific COVID-19 precautions. Measures to prevent intra-hospital spread included contact tracing, adjusted testing policies, isolation of confirmed cases, quarantine of close contacts, environmental disinfection, and PCR testing of environmental samples. RESULTS: Among the 18 incident events investigated, the index case was a healthcare personnel in 8 events, a patient in 8 events, and a caregiver in 2 events. The median number of confirmed COVID-19 cases within 14 days was 13 (IQR, 7-31) for events with SARS-CoV-2 RNA detected on environmental surfaces, compared to only one (IQR, 1-1.5) for events without surface contamination (P = 0.04). Environmental contamination was independently associated with a higher number of COVID-19 cases (P < 0.001). CONCLUSION: This study highlights environmental contamination as an indicator of the severity of incident events and provides a framework for incident event management, including a protocol for environmental sampling. Implementing these measures can help prevent the spread of COVID-19 within healthcare facilities.
Assuntos
COVID-19 , Humanos , COVID-19/epidemiologia , COVID-19/prevenção & controle , SARS-CoV-2 , RNA Viral , Taiwan/epidemiologia , Estudos Retrospectivos , Centros de Atenção TerciáriaRESUMO
Respiratory viruses can be transmitted by multiple modes, including contaminated surfaces, commonly referred to as fomites. Efficient fomite transmission requires that a virus remain infectious on a given surface material over a wide range of environmental conditions, including different relative humidities. Prior work examining the stability of influenza viruses on surfaces has relied upon virus grown in media or eggs, which does not mimic the composition of virus-containing droplets expelled from the human respiratory tract. In this study, we examined the stability of the 2009 pandemic H1N1 (H1N1pdm09) virus on a variety of nonporous surface materials at four different humidities. Importantly, we used virus grown in primary human bronchial epithelial cell (HBE) cultures from different donors to recapitulate the physiological microenvironment of expelled viruses. We observed rapid inactivation of H1N1pdm09 on copper under all experimental conditions. In contrast to copper, viruses were stable on polystyrene plastic, stainless steel, aluminum, and glass, at multiple relative humidities, but greater decay on acrylonitrile butadiene styrene (ABS) plastic was observed at short time points. However, the half-lives of viruses at 23% relative humidity were similar among noncopper surfaces and ranged from 4.5 to 5.9 h. Assessment of H1N1pdm09 longevity on nonporous surfaces revealed that virus persistence was governed more by differences among HBE culture donors than by surface material. Our findings highlight the potential role of an individual's respiratory fluid on viral persistence and could help explain heterogeneity in transmission dynamics. IMPORTANCE Seasonal epidemics and sporadic pandemics of influenza cause a large public health burden. Although influenza viruses disseminate through the environment in respiratory secretions expelled from infected individuals, they can also be transmitted by contaminated surfaces where virus-laden expulsions can be deposited. Understanding virus stability on surfaces within the indoor environment is critical to assessing influenza transmission risk. We found that influenza virus stability is affected by the host respiratory secretion in which the virus is expelled, the surface material on which the droplet lands, and the ambient relative humidity of the environment. Influenza viruses can remain infectious on many common surfaces for prolonged periods, with half-lives of 4.5 to 5.9 h. These data imply that influenza viruses are persistent in indoor environments in biologically relevant matrices. Decontamination and engineering controls should be used to mitigate influenza virus transmission.
Assuntos
Vírus da Influenza A Subtipo H1N1 , Vírus da Influenza A , Influenza Humana , Humanos , Vírus da Influenza A Subtipo H1N1/fisiologia , Influenza Humana/epidemiologia , Umidade , Cobre , Plásticos , PulmãoRESUMO
IMPORTANCE: The COVID-19 pandemic spurred research on the persistence of SARS-CoV-2 and its surrogates. Here we highlight the importance of evaluating viral surrogates and experimental methodologies when studying pathogen survival in the environment.
Assuntos
Bacteriófagos , COVID-19 , Humanos , SARS-CoV-2 , Água , PandemiasRESUMO
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus causing the ongoing global coronavirus disease 2019 (COVID-19) pandemic, is believed to be transmitted primarily through respiratory droplets and aerosols. However, reports are increasing regarding the contamination of environmental surfaces, shared objects, and cold-chain foods with SARS-CoV-2 RNA and the possibility of environmental fomite transmission of the virus raises much concern and debate. This study summarizes the current knowledge regarding potential mechanisms of environmental transmission of SARS-CoV-2, including the prevalence of surface contamination in various settings, the viability and stability of the virus on surfaces or fomites, as well as environmental factors affecting virus viability and survival such as temperature and relative humidity. Instances of fomite transmission, including cold-chain food transmission, and the importance of fomite transmission in epidemics, are discussed. The knowledge gaps regarding fomite transmission of SARS-CoV-2 are also briefly analyzed.
Assuntos
COVID-19 , SARS-CoV-2 , Humanos , RNA Viral/genética , Aerossóis e Gotículas Respiratórios , FômitesRESUMO
The potential for masks to act as fomites in the transmission of SARS-CoV-2 has been suggested but not demonstrated experimentally or observationally. In this study, we aerosolized a suspension of SARS-CoV-2 in saliva and used a vacuum pump to pull the aerosol through six different types of masks. After 1 h at 28 °C and 80% RH, SARS-CoV-2 infectivity was not detectable on an N95 and surgical mask, was reduced by 0.7 log10 on a nylon/spandex mask, and was unchanged on a polyester mask and two different cotton masks when recovered by elution in a buffer. SARS-CoV-2 RNA remained stable for 1 h on all masks. We pressed artificial skin against the contaminated masks and detected the transfer of viral RNA but no infectious virus to the skin. The potential for masks contaminated with SARS-CoV-2 in aerosols to act as fomites appears to be less than indicated by studies involving SARS-CoV-2 in very large droplets.
Assuntos
COVID-19 , SARS-CoV-2 , Humanos , Máscaras , RNA Viral , Aerossóis e Gotículas RespiratóriosRESUMO
AIMS: To utilize environmental surface sampling to evaluate areas of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) contamination within workplaces to identify trends and improve local coronavirus disease 2019 (COVID-19) control measures. METHODS AND RESULTS: Surface sampling was undertaken at 12 workplaces that experienced a cluster of COVID-19 cases in the workforce between March 2021 and March 2022. A total of 7.4% (61/829) samples collected were positive for SARS-CoV-2 RNA by the quantitative PCR (qPCR) with only 1.8% (15/829) of samples identified with crossing threshold (Ct) values <35.0. No sample returned whole-genome sequence inferring RNA detected was degraded. CONCLUSIONS: Few workplace surface samples were positive for SARS-CoV-2 RNA and positive samples typically contained low levels of nucleic acid. Although these data may infer a low probability of fomite transmission within the workplace, Ct values may have been lower at the time of contamination. Workplace environmental sampling identified lapses in COVID-19 control measures within individual sites and showed trends throughout the pandemic.
Assuntos
COVID-19 , Humanos , COVID-19/epidemiologia , SARS-CoV-2/genética , RNA Viral/genética , Local de Trabalho , Surtos de Doenças , Reino Unido/epidemiologiaRESUMO
The COVID 19 pandemic has triggered concerns and assumptions globally about transmission of the SARS-CoV-2 virus via cash transactions. This paper assesses the risk of contracting COVID-19 through exposure to SARS-CoV-2 via cash acting as a fomite in payment transactions. A quantitative microbial risk assessment was conducted for a scenario assuming an infectious person at the onset of symptoms, when virion concentrations in coughed droplets are at their highest. This person then contaminates a banknote by coughing on it and immediately hands it over to another person, who might then be infected by transferring the virions with a finger from the contaminated banknote to a facial mucous membrane. The scenario considered transfer efficiency of virions on the banknote to fingertips when droplets were still wet and after having dried up and subsequently being touched by finger printing or rubbing the object. Accounting for the likelihood of the scenario to occur by considering (1) a local prevalence of 100 COVID-19 cases/100,000 persons, (2) a maximum of about one-fifth of infected persons transmit high virus loads, and (3) the numbers of cash transactions/person/day, the risk of contracting COVID-19 via person-to-person cash transactions was estimated to be much lower than once per 39,000 days (107 years) for a single person. In the general populace, there will be a maximum of 2.6 expected cases/100,000 persons/day. The risk for a cashier at an average point of sale was estimated to be much less than once per 430 working days (21 months). The depicted scenario is a rare event, therefore, for a single person, the risk of contracting COVID-19 via person-to-person cash transactions is very low. At a point of sale, the risk to the cashier proportionally increases but it is still low.
Assuntos
COVID-19 , SARS-CoV-2 , Humanos , COVID-19/epidemiologia , Fômites , Medição de RiscoRESUMO
Simulated exposure to severe acute respiratory syndrome coronavirus 2 in the environment was demonstrated based on the actual coronavirus disease 2019 cluster occurrence in an office, with a projected risk considering the likely transmission pathways via aerosols and fomites. A total of 35/85 occupants were infected, with the attack rate in the first stage as 0.30. It was inferred that the aerosol transmission at long-range produced the cluster at virus concentration in the saliva of the infected cases on the basis of the simulation, more than 108 PFU mL-1 . Additionally, all wearing masks effectiveness was estimated to be 61%-81% and 88%-95% reduction in risk for long-range aerosol transmission in the normal and fit state of the masks, respectively, and a 99.8% or above decline in risk of fomite transmission. The ventilation effectiveness for long-range aerosol transmission was also calculated to be 12%-29% and 36%-66% reductions with increases from one air change per hour (ACH) to two ACH and six ACH, respectively. Furthermore, the virus concentration reduction in the saliva to 1/3 corresponded to the risk reduction for long-range aerosol transmission by 60%-64% and 40%-51% with and without masks, respectively.
RESUMO
Objective: To study the presence of SARS-CoV-2 on surfaces (high, medium and low contacts) and airs in non-sanitary spaces with high public influx to evaluate the risk of environmental contagion. Method: Surfaces and airs were analysed by RT-qPCR to detect the presence of SARS-CoV-2. Results: A total of 394 surfaces and air samples were obtained from spaces with high public influx such as offices, shopping centres and nursing homes. The virus was not detected in any of the samples analysed. Conclusion: Although we cannot emphatically conclude that there is no risk of environmental infection by SARS-CoV-2 in non-sanitary spaces, we can affirm that the risk is almost non- existent.
RESUMO
BACKGROUND: The contribution of droplet-contaminated surfaces for virus transmission has been discussed controversially in the context of the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) pandemic. More importantly, the risk of fomite-based transmission has not been systematically addressed. Therefore, the aim of this study was to evaluate whether confirmed hospitalized coronavirus disease 2019 (COVID-19) patients can contaminate stainless steel carriers by coughing or intensive moistening with saliva and to assess the risk of SARS-CoV-2 transmission upon detection of viral loads and infectious virus in cell culture. METHODS: We initiated a single-center observational study including 15 COVID-19 patients with a high baseline viral load (cycle threshold value ≤25). We documented clinical and laboratory parameters and used patient samples to perform virus culture, quantitative polymerase chain reaction, and virus sequencing. RESULTS: Nasopharyngeal and oropharyngeal swabs of all patients were positive for viral ribonucleic acid on the day of the study. Infectious SARS-CoV-2 could be isolated from 6 patient swabs (46.2%). After coughing, no infectious virus could be recovered, however, intensive moistening with saliva resulted in successful viral recovery from steel carriers of 5 patients (38.5%). CONCLUSIONS: Transmission of infectious SARS-CoV-2 via fomites is possible upon extensive moistening, but it is unlikely to occur in real-life scenarios and from droplet-contaminated fomites.
Assuntos
COVID-19 , Doenças Transmissíveis , Humanos , SARS-CoV-2 , Fômites , Pandemias , Carga ViralRESUMO
Animal viruses are present in most human environments. Their viability in these media is very variable and the most important element that conditions this viability is the existence or not of a phospholipid envelope surrounding the nucleocapsid. After some general considerations on the structure of viruses, their multiplication cycle and their resistance to different physico-chemical agents, some examples of the impact of animal viruses present in the environment on human health will be presented. The situations that are related concern recent epidemiological events: circulation of type 2 polioviruses derived from the Sabin vaccine strain in the wastewater of New York, London and Jerusalem; risk of transmission of Sars-CoV-2 during the spreading of sludge from wastewater treatment plants on agricultural land in the era of the Covid-19 pandemic; « new ¼ forms of food-borne poisoning of viral origin (hepatitis E, tick-borne encephalitis, Nipah virus infection); contamination by epidemic viruses of mobile phones used by pediatricians; role of fomites in the spread of orthopoxvirus infections (smallpox, cowpox, monkeypox). The risk attached to animal viruses present in the environment must be assessed in a measured way without overestimating or underestimating their potential consequences for human health.
RESUMO
Understanding the contribution of routes of transmission, particularly the role of fomites in severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) transmission is important in developing and implementing successful public health infection prevention and control measures. This article will look at case reports, laboratory findings, animal studies, environmental factors, the need for disinfection, and differences in settings as they relate to SARS-CoV-2 transmission.
Assuntos
COVID-19 , SARS-CoV-2 , Animais , FômitesRESUMO
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection is mainly transmitted via droplets and aerosols. To evaluate the role of transmission by fomites, SARS-CoV-2-specific data on transfer rates from surfaces to hands and from hands to face are lacking. Here, we generated quantitatively controlled transfer rates for SARS-CoV-2 from food items (lettuce, ham, and vegetarian meat alternative [VMA]) and packaging materials (cardboard and plastic) to gloves using a wet, dry, and frozen viral inoculum and from glove to glove using a wet viral inoculum. For biosafety reasons, the transfer from surfaces to hands and hands to face was simulated by using gloves. The cumulative transfer rate was calculated by using the data from the first transfer experiment, food or packaging material to glove, and combined with the transfer rate obtained from the second transfer experiment from glove to glove. The cumulative transfer rates from lettuce (4.7%) and ham (3.4%) were not significantly different (P > 0.05) but were significantly higher (P < 0.05) than that from VMA ("wet" or "frozen"). The wet cumulative transfer rate from VMA (1.3%) was significantly higher than the cumulative transfer rate from frozen VMA (0.0011%). No transfer from plastic or cardboard was observed with a dry inoculum. The plastic packaging under wet conditions provided the highest cumulative transfer rate (3.0%), while the cumulative transfer from frozen cardboard was very small (0.035%). Overall, the transfer rates determined in this study suggest a minor role of foods or food packaging materials in infection transmission. IMPORTANCE The observation of SARS-CoV-2 RNA in swab samples from frozen fish packages in China, confirmed only once by cell culture, led to the hypothesis that food contaminated with SARS-CoV-2 virus particles could be the source of an outbreak. Epidemiological evidence for fomites as infection source is scarce, but it is important for the food industry to evaluate this infection path with quantitative microbial risk assessment (QMRA), using measured viral transfer rates from surfaces to hands and face. The present study provides transfer data for SARS-CoV-2 from various types of foods and packaging materials using quantitative methods that take uncertainties related to the virus recovery from the different surfaces into consideration. The transfer data from this model system provide important input parameters for QMRA models to assess the risk of SARS-CoV-2 transmission from contaminated food items.
Assuntos
COVID-19 , SARS-CoV-2 , Animais , Fômites , Humanos , Plásticos , RNA ViralRESUMO
The transmission of most respiratory pathogens, including SARS-CoV-2, occurs via virus-containing respiratory droplets, and thus, factors that affect virus viability in droplet residues on surfaces are of critical medical and public health importance. Relative humidity (RH) is known to play a role in virus survival, with a U-shaped relationship between RH and virus viability. The mechanisms affecting virus viability in droplet residues, however, are unclear. This study examines the structure and evaporation dynamics of virus-containing saliva droplets on fomites and their impact on virus viability using four model viruses: vesicular stomatitis virus, herpes simplex virus 1, Newcastle disease virus, and coronavirus HCoV-OC43. The results support the hypothesis that the direct contact of antiviral proteins and virions within the "coffee ring" region of the droplet residue gives rise to the observed U-shaped relationship between virus viability and RH. Viruses survive much better at low and high RH, and their viability is substantially reduced at intermediate RH. A phenomenological theory explaining this phenomenon and a quantitative model analyzing and correlating the experimentally measured virus survivability are developed on the basis of the observations. The mechanisms by which RH affects virus viability are explored. At intermediate RH, antiviral proteins have optimal influence on virions because of their largest contact time and overlap area, which leads to the lowest level of virus activity.
RESUMO
AIMS: This study aimed to determine the extent of Phi6 (Φ6) transfer between skin and surfaces relevant to consumer-facing environments based on inoculum matrix, surface type and contact time. METHODS AND RESULTS: Φ6 transfer rates were determined from skin-to-fomite and fomite-to-skin influenced by inoculum matrix (artificial saliva and tripartite), surface type (aluminium, plastic, stainless steel, touchscreen, vinyl and wood) and contact time (5 and 10 s). Significant differences in estimated means were observed based on surface type (both transfer directions), inoculum matrix (skin-to-fomite) and contact time (both transfer directions). During a sequential transfer experiment from fomite-to-skin, the maximum number of consecutive transfer events observed was 3.33 ± 1.19, 2.33 ± 1.20 and 1.67 ± 1.21 for plastic, touchscreen and vinyl, respectively. CONCLUSIONS: Contact time significantly impacted Φ6 transfer rates, which may be attributed to skin absorption dynamics. Surface type should be considered for assessing Φ6 transfer rates. SIGNIFICANCE AND IMPACT OF THE STUDY: Although the persistence of Φ6 on fomites has been characterized, limited data are available regarding the transfer of Φ6 among skin and fomites. Determining Φ6 transfer rates for surfaces in consumer-facing environments based on these factors is needed to better inform future virus transmission mitigation strategies.
Assuntos
Bacteriófagos , Humanos , Fômites , Aço Inoxidável , PlásticosRESUMO
AIMS: To determine the antimicrobial potency of a surface-anchored quaternary ammonium salt (SAQAS)-based biocide during in vitro wet and dry fomite assays and to determine the mechanism of killing bacteria on the surface. METHODS AND RESULTS: Wet and dry fomite assays were established in vitro for a commercially available biocide (SAQAS-A) applied to glass and low-density polyethylene (LDPE) surfaces. Both wet and dry fomite tests showed the active killing of Gram-positive and Gram-negative bacteria but not endospores. Assays measuring membrane permeability (ATP and DNA release), bacterial membrane potential and bacterial ROS production were correlated with the time-to-kill profiles to show SAQAS-A activity in suspension and applied to a surface. CONCLUSIONS: SAQAS-A is an effective biocide against model strains of vegetative bacteria. The killing mechanism for SAQAS-A observed minimal membrane depolarization, a surge in ROS production and assessment of membrane permeability supported the puncture of cells in both suspension and surface attachment, leading to cell death. SIGNIFICANCE AND IMPACT OF THE STUDY: SAQAS represents effective surface biocides against single challenges with bacteria through a mechanical killing ability that supports real-world application if their durability can be demonstrated to maintain residual activity.
Assuntos
Anti-Infecciosos , Desinfetantes , Trifosfato de Adenosina , Antibacterianos/farmacologia , Bactérias , Desinfetantes/farmacologia , Bactérias Gram-Negativas , Bactérias Gram-Positivas , Testes de Sensibilidade Microbiana , Polietileno/farmacologia , Compostos de Amônio Quaternário/farmacologia , Espécies Reativas de OxigênioRESUMO
We propose the Transmission of Virus in Carriages (TVC) model, a computational model which simulates the potential exposure to SARS-CoV-2 for passengers traveling in a subway rail system train. This model considers exposure through three different routes: fomites via contact with contaminated surfaces; close-range exposure, which accounts for aerosol and droplet transmission within 2 m of the infectious source; and airborne exposure via small aerosols which does not rely on being within 2 m distance from the infectious source. Simulations are based on typical subway parameters and the aim of the study is to consider the relative effect of environmental and behavioral factors including prevalence of the virus in the population, number of people traveling, ventilation rate, and mask wearing as well as the effect of model assumptions such as emission rates. Results simulate generally low exposures in most of the scenarios considered, especially under low virus prevalence. Social distancing through reduced loading and high mask-wearing adherence is predicted to have a noticeable effect on reducing exposure through all routes. The highest predicted doses happen through close-range exposure, while the fomite route cannot be neglected; exposure through both routes relies on infrequent events involving relatively few individuals. Simulated exposure through the airborne route is more homogeneous across passengers, but is generally lower due to the typically short duration of the trips, mask wearing, and the high ventilation rate within the carriage. The infection risk resulting from exposure is challenging to estimate as it will be influenced by factors such as virus variant and vaccination rates.
Assuntos
Poluição do Ar em Ambientes Fechados , COVID-19 , Ferrovias , Aerossóis , Microbiologia do Ar , COVID-19/transmissão , Fômites/virologia , Humanos , SARS-CoV-2RESUMO
Countries continue to debate the need for decontamination of cold-chain food packaging to reduce possible severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) fomite transmission among frontline workers. While laboratory-based studies demonstrate persistence of SARS-CoV-2 on surfaces, the likelihood of fomite-mediated transmission under real-life conditions is uncertain. Using a quantitative microbial risk assessment model of a frozen food packaging facility, we simulated 1) SARS-CoV-2 fomite-mediated infection risks following worker exposure to contaminated plastic packaging; and 2) reductions in these risks from masking, handwashing, and vaccination. In a frozen food facility without interventions, SARS-CoV-2 infection risk to a susceptible worker from contact with contaminated packaging was 1.5 × 10-3 per 1h-period (5th - 95th percentile: 9.2 × 10-6, 1.2 × 10-2). Standard food industry infection control interventions, handwashing and masking, reduced risk (99.4%) to 8.5 × 10-6 risk per 1h-period (5th - 95th percentile: 2.8 × 10-8, 6.6 × 10-5). Vaccination of the susceptible worker (two doses Pfizer/Moderna, vaccine effectiveness: 86-99%) with handwashing and masking reduced risk to 5.2 × 10-7 risk per 1h-period (5th - 95th percentile: 1.8 × 10-9, 5.4 × 10-6). Simulating increased transmissibility of current and future variants (Delta, Omicron), (2-, 10-fold viral shedding) among a fully vaccinated workforce, handwashing and masking continued to mitigate risk (1.4 × 10-6 - 8.8 × 10-6 risk per 1h-period). Additional decontamination of frozen food plastic packaging reduced infection risks to 1.2 × 10-8 risk per 1h-period (5th - 95th percentile: 1.9 × 10-11, 9.5 × 10-8). Given that standard infection control interventions reduced risks well below 1 × 10-4 (World Health Organization water quality risk thresholds), additional packaging decontamination suggest no marginal benefit in risk reduction. Consequences of this decontamination may include increased chemical exposures to workers, food quality and hazard risks to consumers, and unnecessary added costs to governments and the global food industry.
RESUMO
The SARS-CoV-2 global pandemic poses significant health risks to workers who are essential to maintaining the food supply chain. Using a quantitative risk assessment model, this study characterized the impact of risk reduction strategies for controlling SARS-CoV-2 transmission (droplet, aerosol, fomite-mediated) among front-line workers in a representative indoor fresh fruit and vegetable manufacturing facility. We simulated: 1) individual and cumulative SARS-CoV-2 infection risks from close contact (droplet and aerosols at 1-3 m), aerosol, and fomite-mediated exposures to a susceptible worker following exposure to an infected worker during an 8 h-shift; and 2) the relative reduction in SARS-CoV-2 infection risk attributed to infection control interventions (physical distancing, mask use, ventilation, surface disinfection, hand hygiene, vaccination). Without mitigation measures, the SARS-CoV-2 infection risk was largest for close contact (droplet and aerosol) at 1 m (0.96, 5th - 95th percentile: 0.67-1.0). In comparison, risk associated with fomite (0.26, 5th - 95th percentile: 0.10-0.56) or aerosol exposure alone (0.05, 5th - 95th percentile: 0.01-0.13) at 1 m distance was substantially lower (73-95%). At 1 m, droplet transmission predominated over aerosol and fomite-mediated transmission, however, this changed by 3 m, with aerosols comprising the majority of the exposure dose. Increasing physical distancing reduced risk by 84% (1-2 m) and 91% (1-3 m). Universal mask use reduced infection risk by 52-88%, depending on mask type. Increasing ventilation (from 0.1 to 2-8 air changes/hour) resulted in risk reductions of 14-54% (1 m) and 55-85% (2 m). Combining these strategies, together with handwashing and surface disinfection, resulted in <1% infection risk. Partial or full vaccination of the susceptible worker resulted in risk reductions of 73-92% (1 m risk range: 0.08-0.26). However, vaccination paired with other interventions (ACH 2, mask use, or distancing) was necessary to achieve infection risks <1%. Current industry SARS-CoV-2 risk reduction strategies, particularly when bundled, provide significant protection to essential food workers.